8592 SPL REPAIRS TO BLDG NO P-55 (SINGLE OFFRS QTRS) SPL REPAIRS TO WOODEN FLOORING AND WARDROBES

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each with and including including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but not exc 4 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 3 Nos 100 mm long stainless steel butt hinges. complete all as specified and directed.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2020 Part II complete all as specified and directed.

S&F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F anodised powder coated aluminium door shutters (single / double leaf) or partitions, aluminium section weighing 0.55kg/m including necessary joining cleats, al powder coated glazing clips, rubber neoprene packing, Al powder coated handles 2 Nos in each door, Al powder coated tower bolt 02 Nos, hinges 03 Nos, Al powder coated snap beading, screws, door stopper 01 No etc. complete all as specified. Note :- Glass pane and particle board shall be measured and paid seprately.

S&F anodised powder coated window and ventilator shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/M, aluminium handle / handle slot, locking arrangement etc complete all as specified and directed .Note:- Wiremesh and glass pane shall be measured and paid sepratly.

S&F anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed.

S&F 150 mm extruded aluminium alloy powder coated handles ,fabricated type.

S & F Aluminium anodised powder coated barrel tower bolt of extruded section 150mm long all as specified and directed .

S&F 4.0mm thick tinted sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F in 9 mm thick prelaminated particle board interior gde prelaminated both side with decorative choice lamination fixed with screws as in aluminium partation & aluminium door shutter etc all as directed.

S&F in repairs brass handles, cast type, polished bright 150 mm long complete all as specified and directed.

S&F in repair 300 mm size Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F in repair 150mm long brass floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.

S&F in repairs chain-operated roller blinds for windows, complete with fabric, tube, bottom bar, operating mechanism, brackets, and all accessories as per following specifications: a) Fabric:- Made from high-quality polyester or polyester-blend fabric, UV resistant, fade-resistant, mildew resistant and flame retardant (minimum B1/M1 rating). Opacity shall be as specified (Sunscreen – 5% openness / Blackout / Dim-out) and of approved shade and texture. b) Roller Tube: - Extruded aluminium tube of minimum 1.0 mm wall thickness and suitable diameter (not less than 38 mm for up to 2.0 m width), designed to support the fabric without deflection or sagging. c) Operating Mechanism:- Heavy-duty, enclosed clutch-operated chain mechanism, capable of smooth, jerk-free operation. The mechanism shall allow the blind to stop at any height. Chain to be made of stainless steel or high-grade plastic beads with child safety control devices. d) Bottom Bar:- Extruded aluminium bottom rail with matching end caps and powder-coated/anodised finish, inserted in a stitched pocket in the fabric to ensure proper hanging and weight distribution. e) Mounting Brackets:- Made of galvanized steel or powder-coated aluminium, corrosion resistant, heavy-duty type, suitable for face or recess fixing as per site condition. f) Fixing:- Blinds to be fixed in position using suitable fasteners, screws, and rawl plugs etc., including drilling and making good the damages caused, all complete as per direction of Engineer-in-Charge. g) Colour and Finish:- All components shall be in matching colour, as approved by Engineer-in-Charge. colour with aluminium headrail with chain operation complete all as specified and directed.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Brass finish complete all as specified and directed

S&F in repairs 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc.

M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for polyurethane (PU) polish on existing door/windows/ventilator as per following specification:- (a) Taking down carefully existing door/windows/ventilators without damaging for carrying out PU polish work (b) Prepare the surfase by cleaning to remove dust,greaseor old polish. (c) Sand the surface with appropriate size sand paper,followed by piner grits to achieve a smooth finish. (d) Fill minor cracks and dents with wood filler and allow it to dry completely. (e) Sand the fillets areas and clean the surface with dry cloth or vacccum (f) Apply a thin coat of PU sealer /primer of approved make and allow it to dry completely. (g) Sand lightly with appropriete size sand paper for smoothness. (h) Apply first coat of PU polish of approved make using spray gun/brush/roller as per manufacturer's recommondation. (j) Allow drying for the required curing time as per manufacturer recommendation and sand lightly with fine sand paper to remove any irregularties. (k) Apply second coat of PU polish and allow complete curing. (l) if required by Eng-in-charge a third coat may be applied. (m) Apply the same treatment on chowkhat/frame. (n) Refix the door/window/ventilator complete all as specified and directed.

Demolition of brick work / Stone masonary / PCC block masonary build in cement morter of any description and removing of rubbish from the premices.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) un-reinforced cleaning the premises and removal of rubbish out side the MD land at the location notified complete all as specified and directed.

M&L for 75mm thick (1:3:6) Type-C2 (using 40mm graded crushed stone aggregate) as in plinth protection / path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring complete all as specified and directed.

M&L Non-skid ceramic-coloured tiles, size 300 x 300 x 7 mm, laid on floor, over and including 15mm thick screed bed in cement mortar 1:4 and pointed in white cement with pigment to match the shade of the tiles, complete all as specified and as directed.

S&F Non-skid ceramic-coloured tiles 600 x 600, 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete.

Ditto as above item No 29 but in skirting over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L Glazed Ceramic Coloured Tiles, 300X450X7mm/300x600x7mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.

Taking down Cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, any description complete all as specified and directed.

M&L rendering 15mm thick on stone masonary surfaces other than fair faces of brick surfaces work or stone surfaces in CM 1:6 finished even and smooth without using extra cement

M&L rendering 15mm thick in CM 1:4 on brick /stone surfaces finished even and smooth without using extra cement

M& L dubbing out average 10mm thick on irregular face of walls (when specifically ordered in writing)

M&L for preparation newly plastered surfaces of wall and applying Acrylic Smooth exterior paint of required shade. (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.over a coat of primer over a thin layer of wall care putty of same make complete all as specified and directed.

Complete removal of old decorated surface of wall preparation old plastered surfaces of wall and applying Finishing walls with Acrylic Smooth exterior paint of required shade ,Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Complete all as specifiedspecified and directed.

Complete removal of old decorated surface of walls including brooming down and cleaning the surfaces and applying twomore coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 over a thin layer of wall care putty complete all as specified and as directed . gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on over a coat 1.5mm putty of approved tint all as specified and directed.

M & L for 12mm thick Seamless calcium silicate ceiling made of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish with and including Gl frame work size of grid (605 mm x 605 mm) direction of Engr-in-charge as per site reqmt seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and incl thin layer of putty , sanding the sufrace till smooth surface is obtained and applying two coats of oil bound distemper over a coat of primer incl dismantling of existing false ceiling with frame complete all as specified.

Dismantling timber scantling of size 40 Sqcm and over in section as in unframed work complete all as specified and directed.

M&L for second clas soft wood, clean sawn in scantling over 40 sqcm and over in section and including Dismantling timber scantling 40 sqcm and over in section, unframed work, in any position complete all as specified and directed by Engr-in-charge.

M&l for second class hard wood Plain fillets. square, rectangular or triangular in section,(exc.3 and n.exc. 6sqcm) clean sawn, secured with nails or brads including varneshing complete all as specified.

S & F 2nd class hardwood Battens for tiles, shingles etc sectional area n exc 15sqcm of size including tilting fillets clean dawn all as specified and directed and including dismantling of battens for tiles of any size including tilting fillets spacing exc.15 cm complete

Fixing only batten obtained from dismantling vide item no 4 here -in- before all as directed including dismantling of battens for tiles of any size including tilting fillets spacing exc.15 cm complete all as directed. .

S & F Roof tiles,mangalore Pattern,interlocking at side joints,laid dry etc complete all as specified and directed.and including Dismantling of Manglore pattern interlocking roof tiles.

All as per item No 47 here-in-before but except tiles including Dismantling of Manglore pattern interlocking roof tiles.

Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.

S&F in repair vitreous china wall hung water closet Make Jaquar cat part no: ONS-WHT-10953BIUFSM white with including cast iron 'P' or 'S' trap, matching sheet cover and concealed cistern JCS-WHT-2400WS with drainage pipe and connection to trap seat cover and including flush control plate cat part no: JCP-CHR-372415 . including making good to floor, complete all as specified of make Jaquar or Techno commercial equivalent model in KOHLER and ROCA.

Supply and fixing in repair 630mm X 445mm looking mirror mounted on wall with adequete nos of SS studs complete all as specified.Make Jaquar cat part no:AKP-CHR-35795 or equivalent model in KOHLER and ROCA.

S&F in repair 15mm bore chromium plated Spout fancy type. Make Jaquar cat part no:SPJ-CHR-81429 or equivalent model in KOHLER and ROCA.

S&F in repair 15mm bore chromium plated angle cock fancy type.Make Jaquar cat part no:FLR-CHR-5053N or equivalent model in KOHLER and ROCA.

S&F in repair Brass CP divertor including concealed body and exposed part for mixing hot & cold water with provision for overhead shower complete with all fittings and fixtures. Make Jaquar cat part no:ALD-CHR-065M & SOL-6065MK or equivalent model in KOHLER and ROCA.

S&F in repair brass chromium plated overhead shower 120mm dia single flow with rubit cleaining system fitted to steel pipe or union complete.Make Jaquar cat part no:OHS-CHR-1663 and including 160mm long light body wall mounted with flange of Make Jaquar cat part no:SHA-CHR-477or equivalent model in KOHLER and ROCA.

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.

S&F in repair 15mm bore chromium plated WHB mixer with long shank fancy type.Make Jaquar cat part no:FLR-CHR-5005NB or equivalent model in KOHLER and ROCA.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified. Make Jaquar cat part no:ALD-CHR-577 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair for Sheet glass shelf consisting of 5.5mm thick sheet glass shelf 10cm wide with chromium plated chromium plated brass F brackets (02 Nos at each shelf).

S&F in repairs vitreous china table top wash hand basin, white of size 485x370x150mm & including 32 mm dia PVC waste pipe and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. Make Jaquar cat part no:SLS-WHT-6901 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs chromium plated soap dish approximate size 120x 120x28mm complete all as specified and directed.Make Jaquar cat part no:AKP-CHR-35731P or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair tubular towel Rack Make Jaquar cat part no:CAN-CHR-1181S or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair toilet roll holder with stainless steel flap Make Jaquar cat part no:AKP-CHR-35753PS or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair 2-way Bib cock with flange Make Jaquar cat part no:FLR-CHR-5041N or Techno commercial equivalent model in KOHLER and ROCA.

S&F 15 mm toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and necessary fixing arrangements as required.

Dismantling cast iron work of any de scription and in any position, complete all as specified and as directed.

S& F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

Ditto as bove item No 70 but 75mm bore, complete all as specified and as directed.

S& F 110mm PVC(SWR) (any radius),diminishing pieces or tapers(larger bore measured) fitted withoval access door complete all as specified and as directed.

Ditto as bove item No 72 but 75mm bore complete all as specified and as directed.

S&F 110mm PVC (SWR) bands, complete all as specified and as directed.

S&F 75mm PVC (SWR)bands, complete all as specified and as directed.

S&F PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

S&F PVC (SWR) cowl 75/100mmdia as required complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete all as specified and as directed.

S&F PVC (SWR) Coupler 75/110mm dia bore complete all as specified and as directed.

M&L 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete and ensure best adhesion to surface complete all as specified and as directed.

S&F in 18/19 mm thick block board with 1mm thick colour laminats of approved shed on both side fixed to timber framework with screws as in cup board shutters & shelves and pelmet boxes etc all as directed.

S&F in 12 mm thick block board with 1mm thick colour laminats of approved shed on both side fixed to timber framework with screws prelaminated one side with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc all as directed.

S&F 100 mm long,designer pattern ss handles for fixing in cupboards all as directed and as specified by Engr-in Charge

S&F ,40mm dia, cupboard knobs fixed with nut, screw and washer of Stainless steel, bright finished all as specified and as directed.

S&F telescopic drawer channel 19" long complete all as specified and directed by Engr in charge

S&F telescopic drawer channel 24" long complete all as specified and directed by Engr in charge

S&F Sliding channel for cupboard (Top & Bottom) for sliding of almirah door etc complete all as specified.

S&F stainless steel 300 mm long wardrope handle fancy type complete all as specified.

S&F Locks, drawer, grade I, size 50 mm, complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed.

S&F auto closed hinges , drawer, grade I, size 50 mm to 100mm complete all as specificed.

M&L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and as directed.

S&F Providing and fixing laminated wooden flooring of AC3 grade, including underlay, skirting, transition profiles and necessary accessories, complete as per following specifications: a) Material:- Laminate flooring planks shall be made of High Density Fibreboard (HDF) core with wear-resistant melamine resin impregnated top layer and balancing bottom layer. The flooring shall conform to Abrasion Class AC3 (EN 13329), suitable for moderate commercial and heavy domestic use. b) Dimensions:- Planks shall typically be 8-10 mm thick, with width and length as per manufacturer’s standard . All planks must have tongue and groove/click-lock profile for jointing. c) Surface Finish: - Top surface shall have embossed/textured woodgrain finish in approved shade and pattern. Finish should be resistant to scratches, stains, burns and fading. Make: - Pergo / Action Tesa / Greenlam / Egger / equivalent as approved by Engineer-in-Charge.

S&F 3 mm thick EVA foam or IXPE underlay beneath the flooring to absorb impact, reduce sound, and provide a moisture barrier, all as per manufacturar instruction or as per direction of engr-in-charge.

S&F matching skirting 100 mm high and shade matching with wooden flooringall as per manufacturar instruction or as per direction of engr-in-charge. Make: - Pergo / Action Tesa / Greenlam / Egger / equivalent as approved by Engineer-in-Charge.

S&F matching HDF laminates End profile/transition/reducing profiles where required (doorways, junctions with other floor materials, etc.) to ensure a clean finishhigh quality and shade matching with wooden flooringall as per manufacturar instruction or as per direction of engr-in-charge Make: - Pergo / Action Tesa / Greenlam / Egger / equivalent as approved by Engineer-in-Charge.

M&L for two coats of oil bound distemper over a thin layer of putty after complete removal of existin treatment on old distempered surfaces of wall complete all as specified and as directed.

Taking down of existing Ceilling fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by minor repairs such as capacitor replacement, bearing repalcement and painting, clamping of fan rod to roof iron channel, required down rod upto 4 feet, complete as per site requirement complete all as specified and as directed. Note : The quoted rate shall include the rates of spares and mentioned above.

Taking down of existing Ceilling fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by minor repairs such as capacitor replacement, bearing repalcement and painting, clamping of fan rod to roof iron channel, required down rod upto 4 feet , rewiring of fans complete as per site requirement complete all as specified and as directed. Note : The quoted rate shall include the rates of spares and rewiring of fan mentioned above.

M&L for concealed IN STONE point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked in PVC conduit wide ISI marked medium grade of suitable sizeincluding all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- The quoted rate shall include (i) necessary required length of circuit wiring, (ii) cutting chasing of plastered stone wall (plaster/stone) and plastering and making good to disturbed wall and (iii) taking down of copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Making good of disturbed surfaces will be done by contractor without any extra claims.

(a) One light point controlled by one switch complete all as specified and directed.

(b) One fan/exhaust point controlled by one 5 Amps one way modular switch and modular regulator complete all as specified and directed.

(c) One 5/6 Amp socket controlled by one switch same board complete all as specified.

(d) One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

(e) One bell point controlled by one way switch

M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked in PVC casing caping wide ISI marked including all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- The quoted rate shall include (i) necessary required length of circuit wiring, (ii) taking down of copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Making good of disturbed surfaces will be done by contractor without any extra claims.

(a) One light point controlled by one switch complete all as specified and directed.

(b) One light point controlled by 2 way switch

All as per item no. 100 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified.

S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as directed

S&F bell push modular 6A switch complete all as specified and directed.

S&F ding dong bell Ac 230V complete all as specifeid and directed

S&F modular switch single pole two way 5/6 Amps including connection complete all as specified and as directed

S&F socket out let 5/ 6 Amps 3 pin modular type incl connection complete all as specified and as directed

S&F of modular rotating step type electronic fan regulator( 5 step), 100W /240 volts two module incl connection complete all as specified and as directed

S&F of modular socket twin type, 5 pin 6/16 Amps flush type incl connection complete all as specified and as directed

S&F modular switch type single pole one way 15/16 amps incl connection complete all as specified and as directed

S&F in repair ceiling rose, surface, three terminals incl connection complete all as specified and as directed.

Supply and fixing in repairs round shape 15 watt 220 volts AC recessed type CW with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified

Supply and fix spot light 3/4W NW/CW/WH complete cutting of sheet and fixing in ceiling all as specified and directed

Supply and fix wall mounted table light spring type 3/4 W black/gold/siver complete all as specified and directed

Supply and fix LED in repairs building security light 30 W IP 65 pressure die cast aluminium housing with GI bracket of suitable size complete including clamps , screws etc and dia complete all as specified and directed

Supply and fix aluminium batten tube light 20W including necessary connections and connecting ire upto ceiling rose complete all as specified and directed

Supply and fix decorative design mirror light for 10W gold colour coated complete all as specified and directed

S&F Sub main wiring with 2 runs of single core, 6 Sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS quality) drawn through PVCconduit medium grade with fitting/accessories, fixed on roof, walls, ceiling etc including 6 Sqmm PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire complete as specified and directed. Note : Rate includes (i) PVCconduit and its accessories (ii) Two runs of cable and one run of earth wire of size 6 sqmm and including taking down of old U/S submain

S&F in repair of MCB SPN DB 8 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door including taking down old unsv DB and making the the surface good to match with adjucent complete all as specified and as directed

S&F 4Way TPN DB double door of bus bar 200 A complete all as specified and directed

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit with cover incl excavation and earth work in any type of soil and testing on completion etc complete.

Supply and fixing amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

(a) SP 32 AMP

(b) SPN 40-63 AMP

Supply and fixing 415V 63A 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fix geyser box modular type consists of sunken box with MCB 20A plug top with indication complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of LT UG cable/poles etc in soft/loose soil and getting out complete all as specified.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point for any type of excavation.

M&L DWC pipe 50 mm dia to be lay in trench by passing cable complete all as specified and directed

M & L for Cutting of road/hard standing and making good with PCC (1:2:4) using 20mm graded stone aggregate complete all as specified.

M/S Abhishek Builders (BID ID -3358075)

PRANAV ENTERPRISES (BID ID -3360469)

M/S NAVNEET S MORDE (BID ID -3360476)

Suma Construction (BID ID -3359544)

SARATH ENTERPRISES (BID ID -3360151)

shiva traders (BID ID -3359351)

Parhar Enterprise (BID ID -3360700)

REKHA ELECTRICALS (BID ID -3359955)

PAL CONSTRUCTION (BID ID -3359750)