GE C-47 2021-22 REPAIR AND REPLACEMENT OF JOINERIES PLASTERING TILING STEEL WINDOWS IN MD ACCN OF NPC PRATAP CHOWK ARJAN VIHAR OF AGE BR II UNDER GE CENTRAL DELHI CANTT 10

Amount

Demolition of brick work built in cement mortar in any description and position, complete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.

All as per item no 02 before but except bricks

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified upto six storey height.

Taking down cement plaster in concrete or brick wall surface of any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction.

M & L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces including taking down old plaster on ceiling complete all as specified.

M&L Preparation of newly plastered surface applying three coats of white lime wash on walls complete all as specified.

M&L for preparation of newly plastered surface applying two coats of oil bound distemper with roller brush (white or tinted) on plastered wall surfaces complete all as specified.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by complete removal of existing treatment and applying two coats of white lime washing, complete all as specified.

M&L for Preparation of old decorated surface(Plastered or unplastered) of ceiling by complete removal of existing treatment applying two coat of white wash complete all as specified and directed.

M&L complete removal of existing treatment of old surface with two coat of oil bound distemper on walls / ceiling incl preparation of old plastered surface complete all as specified and directed

M&L resecuring or Easing and adjusing without taking down of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area exc. 1sqm but not exc. 2 sqm each,complete all as specified and directed.

M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified.

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, complete all as specified.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, and refixing in same opening complete all as specified.

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, both face is covered with decorative face veneer with lipping/frame to match both sides. Flush shutters shall have teak wood edging complete all as specified.

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging complete all as specified.

S&F 35mm thick (factory made) plain, framed, panelled shutter (two panel) with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides using 2nd cl HW. The size of rail & style as per IS :1003 (Part I), Kilan seasoned & chemicals pressure treated, complete all as specified.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge

S&F Factory Made Solid PVC double door frame of size 120 x 50mm with a wall thickness of 5mm (+0.25) made out of extruded 5mm (+0.25) thick prelam PVC sheet of density 600kg/cum manufactured by an ISO-9001-205 certified company ,and by joining 3 Nos. heat moulded PVC section, The Hinge section of size 35 x 35mm shall be made from plain colour PVC sheet of 5mm (+0.25) thickness, the inside section will be covered with 5mm thick PVC sheet C shape covering section of size 120mm x 50mm. At centre top section of 5mm (+0.25) thick 50x50x50mm pattam section should be pasted with solvent cement adhesive to make double pattam of frame. The frame shall be mitre cut at two corners and joined with 4 Nosof 150mm long L brackets of 19mm x 19mm M.S square tube or joint by fusion heat welding. The two vertical doors frames are to be shall be reinforced with 25mm x 25mm M.S. square tube of 19 gauge through out the frame. The door frame shall be fixed to wall using 8/100mm long M.S Screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc complete as per manufacturers specifications and direction of Engr in charge.

S&F Fibre glass Reinforced Plastic(FRP) Door shutter shall 30mm thick glossy panelled door shutter of required colour and approved brand and manufacturer . Made with retardant grade unsaturated Poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitble blocks of seasoned wood inside at required places for fixing of fittings , cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000.complete all as specified

S & F Factory made solid PVC wire gauged/ glazed and window shutter 30mm (styles) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded prelaminated PVC C channel having a prelam PVC sheet strip of 20mm with stuck inside with solvent cement for stiles and prelam PVC sheet for top, lock and bottom rail on either side and as gap insert for top rail and bottom rail. The wire gauge shall be stainless steel alloy wire cloth 0.36mm nominal dia of wire and average aperture 1mm, wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tube and wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement. The door frame shall be fixed to wall using 8/100mm long M.S Screwsthrough the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,

S& F 25 mm thick flush shutters solid core construction, with block board core and plywood face panel, commercial type on both sides complete all as specified.

S&F mild steel work as in hold fast 25x3mm flat iron and similar articles conforming to Fe-410-0, complete all as specified.

Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified

S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed.

S&F factory made PVC frame of size 75x40mm with wall thickness of 4mm made out of extruded 4mm thick plain or prelam PVC sheet reinforced with 15x15mm MS square tube of 19 gauge thickness through out the frame and mitred cut and two corners and jointed with two nos of 150mm long bracket of 10x10mm MS Square tube. The door frame shall be fixed to wall using 8/100mm long M.S Screwsthrough the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc complete as per manufacturers specifications and direction of Engr in charge

S&F 100 mm long (size) butt hinges, medium weight, cold rolled mild steel, complete all as specified.

S&F 75 mm long (size) butt hinges, medium weight, cold rolled mild steel, complete all as specified.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified.

S&F in repairs 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified.

S & F in repairs 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified.

S&F 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified.

S&F in repair 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified.make-

S&F 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified.

S & F in repair 200mm long (size) aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified.

S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised, complete all as specified.

S&F in repair floor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified.

S&F in repair Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified.

S&F in repairs 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with steel wire staples, complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed stainless steel wire staple, complete all as specified and directed.

S&F 4.00 mm thick plain sheet glass with wooden beads, PVC beading, aluminium beads, in square n.exc 0.5 Sqm in each pane, complete all as specified.

S&F 4.00 mm thick figured glass, pin head type and glazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified

S&F 5.5 mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm each including grinding of edges for crockery cupboard including taking out/ broken glass with roller, complete all as specified.

All as per item 54 above but except glass.

S&F mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified

S&F in repair mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified

S&F in repair double aluminium channel size 10x20x2 mm, complete all as specified.

S&F MS roller with "C" shape staple, chromium plated for 5.5mm thick sheet glass complete allas specified

S&F Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed.

M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified.

M&L for coloured ceramic tiles (Non skid) of size 300x300x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as directed.

M&L for coloured ceramic tiles (Non skid) of size 400x400x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as directed.

M&L for coloured glazed ceramic tiles 300x600 x 7 to 8mm / 300x450 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 16-18mm thick black granite stone work (table rubbed and polished) laid over and including 15mm thick screed bed or bedding layer in CM 1:4 as in steps, Jambs, pillars, window clips, cooking platforms and like, inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, front and side of slab moulded and polished complete all as specified and directed. Granite stone slab shall be laid in single piece with rounding of edgesand a grove shall be provided beneath the projection portions of stone slab and provn of hole for gas pipe shall be provided.

S&F mortice lock of size 100mm with Brass fancy type and vertical type 4 levers with key in duplicate (Make : Harrison/Godrej) complete all as specified and directed by Engineer-in-Charge.

S & F Steel windows and ventilators with side hung glazed and wiremesh shutters with Z section including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded.

Providing and fixing factory made uPVC any colour fixed window/ventilator area n exc 1.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 58mm), T Profile ( One vertical length in between two shutters) (60mm x 74mm).Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (28mm x 21.5) , sash (31mm x 27.5mm), T Profle (27mm x 17mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasterners including 5mm thick toughened glass( plain or figured) with single glazing bead and weather seal and required accessories. Note: Net opening will be measured for payment purpose.

M&L Providing and fixing factory made uPVC any colour sliding window Three track of area n exc. 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, Frame (88mm x 52mm), Sliding sash (42mm x 67mm), Sliding mesh sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm).Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (30mm x 18) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware (Touch lock of zinc alloyed (any colour powder coated), steel roller system, including 5mm thick toughened glass with single glazing bead and weather seal , Stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories). Note: Net opening will be measured for payment purpose.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement incl window grill (Grade- 304) using 10mm thick square bars 100mm centre to centre of weight not less than 0.62 kg/Rm incl necessary frame and accessories for window and ventilator grill/ guard bar complete all as specified and directed.

Schedule of Credit

GIAN ENGINEERS

m/s VK construction company

M/S Sunil Steel Works

imran construction company