AGE I CGN 14 22 23 REPAIR MAINTENANCE AND PAINTING OF FURNITURE UNDER AGE I CG NOIDA

Amount

Removing of unserviceable 3 way elbow of GI charpoy and S&F new 3 way, 32mm dia elbow, medium grade with ISI mark complete all as specified and directed.

Removing unserviceable check nut of GI charpoy and S&F new check nut , 32mm dia complete all as specified and directed.

Removing of unsereviceable long rail of GI charpoy and S&F new long rail, 32mm , medium grade, ISI marked including cutting, threading at both ends and fixing complete all as specified and directed.

Converting the unseviceable long rail obtained from item No3 above into short rail including cutting threading at both ends and fixing complete all as specified and directed.

Removing of unserviceable short rails of GI charpoy and converting the same into two legs including cutting, threading at one end fixing, complete all as specified and directed. Note : The quoted rate is deemed to include provision of 3 mm thick 50 mm dia MS circular plate welded to legs.

Removing of unserviceable mild steel square tube and S&F mild steel square tube of size 20mm, 1.6mm thick, 3 feet long 03 Nos to the GI frame (long rail) by welding, complete all as specified and directed.

Removing of existing wornout nylon newar from charpoy GI Pipe, tightening all check nuts elbow, long rail, legs etc to hold the charpoy tight and S&F mild steel square tube of size 20mm, 1.6mm thick, 3 feet long 03 Nos to the GI frame (long rail) by welding at equal distance, including S&F commerical plywood 12mm thick MR grade by screwing down to the GI pipe with appropriate machine screw & nuts and painting the steel surface of Charpoy by applying two coats of Synthetic enamel paint over a coat of primer complete all as specified and directed.

Removing of existing 12mm thick comercial plywood from charpoy GI pipe and S&F commerical plywood 12mm thick MR grade by screwing down to the GI pipe and mild steel square tube with appropriate machine screw and nuts complete all as specified and directed.

NOTE :- 1. POLISHING WILL BE DONE ON WHOLE WOODEN SURFACE OF FURNITURE AND NOT ONLY ON REPLACED PARTS

2. ALL MELAMINE POLISH WORK WILL BE DONE WITH COMPRESSOR.

Removing the existing unserviceable Front/Back legs carefully from Chair Dinning and replacing the same with new teak wood leg made of 1st class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of same size and shape including applying Melamine polishing to required gloss complete all as specified and directed. Note: Colour of Polish should be as decided by AGE(I)

All as per serial item No.9 above but rear leg

All as per serial item No.9 above but Front rail / rear rail / side rail.

All as per serial item No.9 above but back.

All as per serial item No.9 above but Stiffner

Removing the existing unserviceable Front/Back legs carefully from Chair Easy and replacing the same with new teak wood leg made of 1st class hard wood teak (MP) free from knots , cracks etc with permissible moisture contents, timber components of same size and shape including applying Malamine polish strictly as per manufacturers instructions complete all as specified and directed. Note: Colour of Polish should be as decided by AGE(I)

All as per serial item No 14 above but arm

All as per serial item No 14 above but front Rail / back Rail of seat

All as per serial item No 14 above but side Rail of seat

All as per serial item No 14 above but top / bottom rail of back

All as per serial item No 14 above but side Rail of back

Removing the existing unserviceable front leg carefully from Chair Writing and replacing the same with new teak wood leg made of 1st class hard wood teak (MP) free from knots , cracks etc with permissible moisture contents, timber components of same size ,shape etc including applying Melamine polishing to required gloss complete all as specified and directed. Note: Colour of Polish should be as decided by AGE(I)

All as per serial item No 20 above but rear leg

All as per serial item No 20 above but stiffner

All as per serial item No 20 above but arm Rest

All as per serial item No 20 above but side rail / front rail / back rail.

Removing the existing unserviceable head rest of bed ply wood top, S&F new head rest and applying Melamine polishing to required gloss complete. Note: Colour of Polish should be as decided by AGE(I)

All as per srl item No25 above but foot rest

All as per srl item No 25 above but MR plywood top 12 MM thick confirming to IS-303.

All as per srl item No 25 above but long rail of teak wood.

Removing the existing unserviceable top from Table centre, S&F new top made out of 18/19 mm thick prelaminated MDF board including 4 mm thick Teak wood beading alround the top and applying Malamine polish strictly as per manufacturers instructions complete all as specified and directed. Note: Colour of Polish should be as decided by AGE(I)

Removing the existing unserviceable leg from Table centre, S&F new leg made of 1st class hard wood teak (MP) free from knots , cracks etc with permissible moisture contents, timber components of same size , shape etc. and applying Melamine polish strictly as per manufacturers instructions complete all as specified and directed. Note: Colour of Polish should be as decided by AGE(I)

All as per srl item No 30 above but side rail

All as per srl item No 30 above but front rail / rear rail

Removing the existing unserviceable top from Peg Table, S&F new top made out of 18/19 mm thick prelaminated MDF board including 4 mm thick Teak Wood beading alround the top and applying Malamine polish (to whole teak body of chair) strictly as per manufacturers instructions complete all as specified and directed. Note: Colour of Polish should be as decided by AGE(I)

Removing the existing unserviceable leg of Peg Table, S&F new leg made of 1st class hard wood teak (MP) free from knots , cracks etc with permissible moisture contents, timber components of same size , shape etc.and applying Malamine polish strictly as per manufacturers instructions complete all as specified and directed. Note: Colour of Polish should be as decided by AGE(I)

All as per srl item No 34 above but side rail

All as per srl item No 34 above but front rail / rear rail

Taking out old unserviceable cushioned seat or back from Chair Dinning Cushioned,S&F cushioned seat or back made out of 75 mm thick ,32 density foam duly covered & stiched. Note: Colour of cloth shall be as approved by AGE(I)

Removing the existing unserviceable top from Table Dinning 6 persons, S&F new top made out of 18 mm thick prelaminated MDF board as balancing with and including 4 mm thick Teak Wood beading alround the top and applying Malamine polish strictly as per manufacturers instructions complete all as specified and directed. Note: Colour of Polish should be as decided by AGE(I)

Removing of existing unserviceable cushion seat / back from sofa sets, of size 21" X 22", S&F100 mm thick cushion of 32 density foam duly stiched complete all as specified and directed. Note: Colour of cloth shall be as approved by AGE(I)

Cutting / taking out old unserviceable cane from chair dinning, Chair easy , Chair writing, Stool dressing, Chair CB without arm, Chair Tipup, Bin soiled, supplying & recanning of chair with white/ cream palstic cane 2mm wide and canning border with 3.5 / 4mm wide cane as per Godrej pattern.

Sanjay Associates