PROVISION OF ARMS CLEANING SHED NEAR BLDG NO 03 AT OLD AMRITSAR CANTT

Amount

Material and Labour for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out , returning , filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm ,watering and removing surplus soil to a distance n.exc 50 m and making good surface ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Cement concrete (1:2:4), type B-2 ( 40mm graded agregate) as in foundations, filling and mass concrete complete ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Steel work in tubular trusses including special shaped washed etc complete using ERW or induction butt welded tubes including distance pieces , cleats etc ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces ; Complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5m wide and n exc 10 sq m on plan area and n exc 1.5m deep in soft and loose and getting out in soft/ loose soil ; Complete all as specified and as directed by Engineer-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Hardcore of borken stone or boulder, gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for 75mm thick Cement concrete type D-2 , 1:4:8 (40 mm graded aggregate) as in sub base of floor. ; Complete all as specified and as directed by Engineer-in-Charge.

Material & labour for 20-25mm thick machine cut kota stone slab flooring with Kota stone (of size not less than 0.5 sqm each) , laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab ; over and including 15mm thick screed bed in cement mortar 1:6 , with & including cutting, rubbing and mirror polishing to the entire kota stone slab flooring with rubbing machine using suitable size of cutting stones to the entire satisfaction of the AGE , complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:4 ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit incl accessories totally concealed in wall, ceiling/roof etc., with modular metal flush boxes of suitable size & modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly ; Complete all as Specified and as directed by Engineer-in-Charge. (a) One light point/Fan point controlled by one switch

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit incl accessories totally concealed in wall, ceiling/roof etc., with modular metal flush boxes of suitable size & modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly ; Complete all as Specified and as directed by Engineer-in-Charge. (a) One 3 pin 5 Amps switch socket outlet on independent board.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit incl accessories totally concealed in wall, ceiling/roof etc., with modular metal flush boxes of suitable size & modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly ; Complete all as Specified and as directed by Engineer-in-Charge. (a) One 3 pin 5 Amps switch socket outlet on same board.

Supply and fix switch piano one way 5 A, SP, 230 Volts ; Complete all as Specified and as directed by Engineer-in-Charge.

Supply and fix Socket outlet 2 in 1, 3 pin 5 Amps Flush type ; Complete all as Specified and as directed by Engineer-in-Charge.

Supply and Fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal ; Complete all as Specified and as directed by Engineer-in-Charge.

Supply and Fixing Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings ; Complete all as Specified and as directed by Engineer-in-Charge.

Supply and fix wall/ceing mounting LED 18 Watt PC Diffuser tube light fitting complet with all aceesories 1x18W LED suitable for domestic application 240Volts 50HZ including one tube rode and internally pre-wired with 1.5 sqmm twin twisted flexible copper conductor and ; Complete all as Specified and as directed by Engineer-in-Charge.

Material and Labour for sub main wiring with 1100 volts grade two single core PVC insulated and unsheathed cable with stranded copper conductor 4 sqmm drawn into and including electrical grade PVC conduit not less than 25mm dia with IS 9537(Part-III) 1983 mark , or relevent ISI mark with all accessories fixed concealed including chase cutting in brick / stone masnory for fixing conduit and making good the disturb surfaces of wall as per existing including 2.5 sqmm multistranded copper conductor as earth wire in green colour ; Complete all as Specified and as directed by Engineer-in-Charge.

Supply and Fixing of distribution board made out of CRCA mild steel sheet surface with insulated material like polysteere or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way , 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB's and isolators etc ; Complete all as Specified and as directed by Engineer-in-Charge. Note- Cost of removing old wooden box and making good of surfaces as original by Brick work , plastering , white wash , colour wash distemper etc included in the quoted rate.

Supply and Fixing in repairs MCB of double pole , 240 volts , 32 Ampere, rupturing capacity 10 KA 'B' curve type Complete all as Specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs MCB of single pole , 240 volts , 32 Ampere, rupturing capacity 10 KA 'B' curve type Complete all as Specified and as directed by Engineer-in-Charge.

Supply and Fixing BLDC 5 star rated ceiling fan 1200 mm sweep with all necessary asseories Complete all as Specified and as directed by Engineer-in-Charge.

GEE EMM ASSOCIATES

Munish Kalia

AS CONSTRUCTION

amardeep traders

m/s. gopal krishan