Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹29.7 L+₹9,466 (0.32%)Rejected-Finance FUG FARM VIEW APARTMENTS KHASRA NO 40 SATBARI CHATARPUR HAUZ KHAS SOUTH DELHI NEW DELHI 110074 | NEW DELHI | SOUTH DELHI | DELHI | 110074 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹30.0 L+₹39,586 (1.34%)Rejected-Finance A 3 257 JANAKPURI NEW DELHI 110058 | WEST DELHI | DELHI | 110058 | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹31.3 L+₹1.7 L (5.81%)Rejected-Finance E 73 FF GALI NO 17B SADH NAGAR PALAM COLONY NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹34.8 L+₹5.2 L (17.7%)Rejected-Finance THIRD FLOOR RIGHT SIDE H NO 835 KAPASHERA NEW DELHI 110037 | NEW DELHI | NEW DELHI | DELHI | 110037 | L5 | Rejected-Finance OTHER THAN L1 |
| Sl No | Description | Qty | Unit | Sumit Enterprises L6 | Ridhi engineers and builders L8 | Rahul Enterprises L7 | M/S ADHIKARI CONSTRUCTION CO. L3 | R S ENGINEERS L2 | RS GREEN INDIA CONSTRUCTION L5 | PRASAD ELECTRICALS L4 | M/s Shri Shyam Bharat Builders L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 metre depth and getting out in any type of soil for taking out/laying of pipe complete all as specified and as directed | 1,169 | CUM | 129 ₹1,50,801 | 110 ₹1,28,590 | 99 ₹1,15,731 | 99 ₹1,15,731 | 99 ₹1,15,731 | 110 ₹1,28,590 | 135 ₹1,57,815 | 80 ₹93,520 Lowest |
| 2.00 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed. | 1,052 | CUM | 45 ₹47,340 | 20 ₹21,040 | 29 ₹30,508 | 19 ₹19,988 Lowest | 99 ₹1,04,148 | 80 ₹84,160 | 125 ₹1,31,500 | 50 ₹52,600 |
| 3.00 | Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all as specified and directed. | 117 | CUM | 45 ₹5,265 | 20 ₹2,340 | 90 ₹10,530 | 19 ₹2,223 Lowest | 233 ₹27,261 | 80 ₹9,360 | 125 ₹14,625 | 20 ₹2,340 |
| 4.00S&F Gun metal gate valve with iron wheel head screwed both iron iron pipe ISI Marked as per IS 778 of following sizes including taking out unserviceable gate valve complete all as specified and directed :- | |||||||||||
| 4.01 | 15 MM bore | 6 | EACH | 750 ₹4,500 | 550 ₹3,300 | 690 ₹4,140 | 499 ₹2,994 | 348 ₹2,088 | 800 ₹4,800 | 345 ₹2,070 | 290 ₹1,740 Lowest |
| 4.02 | 20 MM bore | 8 | EACH | 999 ₹7,992 | 750 ₹6,000 | 790 ₹6,320 | 799 ₹6,392 | 449 ₹3,592 | 850 ₹6,800 | 455 ₹3,640 | 390 ₹3,120 Lowest |
| 4.03 | 25 MM bore | 4 | EACH | 1,500 ₹6,000 | 950 ₹3,800 | 1,290 ₹5,160 | 999 ₹3,996 | 499 ₹1,996 | 1,100 ₹4,400 | 655 ₹2,620 | 490 ₹1,960 Lowest |
| 5.00Supply and fixing in replacement of old UNSC pipe with PP-R Pipe 3 layer PP-R (Polypropylene random copolymer) concealed pipe SDR 7.4 (PN 16) UV stablised and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random(PPR) fitting complete to walls, ceiling, or floor or laid in trenches of following sizes complete all as specified and directed by Engineer-in-charge (Note:- (i) Excavation & earth work shall be measured and paid seperately under respective items of BOQ. | |||||||||||
| 5.01 | 16 mm bore | 450 | RM | 20 ₹9,000 Lowest | 34 ₹15,300 | 29 ₹13,050 | 99 ₹44,550 | 24 ₹10,800 | 160 ₹72,000 | 30 ₹13,500 | 30 ₹13,500 |
| 5.02 | 20 MM bore | 600 | RM | 25 ₹15,000 Lowest | 35 ₹21,000 | 29.9 ₹17,940 | 99 ₹59,400 | 29 ₹17,400 | 180 ₹1,08,000 | 40 ₹24,000 | 40 ₹24,000 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
15 Aug 2025, 6:00 pmClosed
GE(U)(W/S) DELHI CANTT
GE(U)(W/S) DELHI CANTT 110010
MAINTENANCE / REPLACEMENT OF TREATED WATER PIPELINE AND CONNECTED ITEM IN THE AREA OF AGE (U) WATER SUPPLY NO-II UNDER GE (U) WATER SUPPLY DELHI CANTT-10
2025_MES_721292_1
GE/WS/Token No-21 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
GE(U)(W/S) DELHI CANTT 110010
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE(U)(W/S) DELHI CANTT
₹96,000
11 Oct 2025
18 Jul 2025
18 Aug 2025
18 Jul 2025
15 Aug 2025
2 Aug 2025
Amount
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 metre depth and getting out in any type of soil for taking out/laying of pipe complete all as specified and as directed
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.
Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all as specified and directed.
S&F Gun metal gate valve with iron wheel head screwed both iron iron pipe ISI Marked as per IS 778 of following sizes including taking out unserviceable gate valve complete all as specified and directed :-
15 MM bore
20 MM bore
25 MM bore
Supply and fixing in replacement of old UNSC pipe with PP-R Pipe 3 layer PP-R (Polypropylene random copolymer) concealed pipe SDR 7.4 (PN 16) UV stablised and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random(PPR) fitting complete to walls, ceiling, or floor or laid in trenches of following sizes complete all as specified and directed by Engineer-in-charge (Note:- (i) Excavation & earth work shall be measured and paid seperately under respective items of BOQ.
16 mm bore
20 MM bore
25 MM bore
40 MM bore
50 MM bore
63 MM bore
75 MM bore
90 MM bore
110 MM bore
160 MM bore
Supply & Laying of GI pipe "medium grade" ISI mark including all fittings in old/new positions in trenches/wall/floor complet and making good the distributed surfaces as per existing as directed of following sizes. (Note:- Excavation and earth work will be measured and paid separately).
15 MM bore
20 MM bore
25 MM bore
40 MM bore
50 MM bore
80 MM bore
M&L fabrication, welding and fixing of MS frames in replacement made out of MS angle/flat of any size as required at site for repair/replacement of valve pit cover/sump man hole cover, stair case step, equalization and cholorine contact tank boundary, and all other iron works including painting two coats with synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.
M&L reinforced cement concrete (nominal mix) used in construction of treated water stand post in type B0 1:2:4 (12.5 mm graded aggregate) complete all as specified and as directed.
Supply and fixing only in replacement of 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for male/female threaded for any pipe complete all as specified and directed..
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin jambs pillars etc complete all as specified and directed.
M&L PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate for foundation complete all as directed by Engineer-in-charge
M&L brick work with subclass B bricks straight or curved on plan exc. 6m mean radious in full brick wall thickness (23 cm) walls built in cement mortar (1:4) complete all as directed and specified by Engr-in-charge
M&L Rendering 10 mm thick with cement plaster (1:6) on brick walls for finishing the surface fair and even complete all as specified and directed by engr-in-charge
M&L Boring holes under road pavement by bocky manually in any type of soil upto 200 mm bore complete all as specified and directed by Engr-in-Charge. (Note:-Location & depth of trenchless boring is as directed by EIC.
Supplying, laying, jointing, welding and testing MS Pipe (Heavy class 'C') IS : 1239/3589, of followiing sizes 8mm thick laid in trenches or in Horizontal/Vertical/inclined position or laying on floors for connections for suction, to header and connected to out going water main CI/DI pipe line, for following size including taking out the old unserviceable pipes :- (Note:- (i) MS Flanges incl fabrication work will be measured and paid separately. (ii) Excavation and earth work will be measured and paid separately.
50 MM bore
80 MM bore
100 MM bore
150 MM bore
Supply & Fixing PP-R Gate valves (brass insert) as per requirement of the site of following size in replacement complete all as specified and as directed.
20 mm bore
25 MM bore
Supply and Fixing in replacement of CI Foot valve of following size , Flanged ends, Swing type opration with rubber sheet as per IS-4038 including taking out unserviceable of following sizes complete all as specified and directed by Engineer-in-Charge. Note (i) :- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this items.
80 MM bore
100 MM bore
150 MM bore
Material and labour including jointing and testing of cast iron sluice valves class PN-1.0 PD short body, conforming to IS:14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and rubber gaskets including taking out unserviceable sluice valve and removal from site for the follwing sizes complete all as specified and directed. Note- (i) Flanged joints complete with jointing material shall deemend to be included in the unit rate of this item.
80 MM bore
100 MM bore
150 MM bore
Supply, installation and testing in replacement of unserviceable flanged ends Water Meter woltman type, including testing and making good connection with flanged ends, with gasket rubber sheet and nut & bolts etc ISI Marked fixing in horizontal/incline/vertical position, including taking out unserviceable of following sizes complete all as specified and as directed at site by the Engineer-in-Charge. (Note:- (i) Flange Joints Including Jointing material shall deemed to be included in the unit rate of this item.
80 MM bore
100 MM bore
150 MM bore
Supply, fixing, jointing and testing of Cast iron Non Return valve of 150mm sizes without by pass arrangement , Swing type, confirming to IS 5312, flanged ends pressure rating PN 1.0 complete including taking out unserviceable NRV complete all as specified and as directed at site by the Engineer-in-Charge. (Note:- (i) Flanged joints complete with jointing material shall deemed to be included in the unit rate of item.)
S&F, in replacement of butterfly valve (wafer type) P.N 1.6 with S.S-304 disc type of following sizes with all necessary fittings including taking down old unservicable butterfly valve complete all as specified and directed by Engr-in- Charge.
50 MM bore
80 MM bore
100 MM bore
An amount of Rs 1,47,230.00 shall be deducted from BOQ on account of schedule of credit
R S ENGINEERS (BID ID -3394771)
M/S ADHIKARI CONSTRUCTION CO. (BID ID -3384165)
PRASAD ELECTRICALS (BID ID -3385323)
RS GREEN INDIA CONSTRUCTION (BID ID -3385171)
Sumit Enterprises (BID ID -3387060)
Rahul Enterprises (BID ID -3392760)
Ridhi engineers and builders (BID ID -3387395)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .