SPECIAL REPAIR TO BLDG NO P-54 (1-8) (OR MD ACCN) IN DC LINE AT MIRAN SAHIB UNDER GE JAMMU

Amount

Taking down chowkats or frames (without taking off shutters from the frame) exceeding 1.50 sqm but not exceeding 4 sqm each complete all as directed.

All as per item No.1 here-in-before but not exceeding 1.5 m each.

S&F pressed steel frames of size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete all as directed.

All as per item No 3 here-in-before but of size 125x60 mm

M&L pressed steel frames for cup board chowkhat of size 60x40mm with one or more rebates incl necessary fixing lug, hold fasts etc complete all as directed.

M&L cement concrete (1:3:6) type C0 using 12.50mm graded crushed stone aggregate filling in pressed steel chowkats bed block for holdfast and the like complete all as directed.

S&F 35 mm thick factory made wooden moulded panel door shutter with masonite facing on both side ,two three or four panel design as approvrd, made of solid core using machine filled rigid expanded polyurethane foam The door facing plate shall be 3.2 mm thick complete all as directed.

S&F 35 mm thick factory made IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc complete all as directed.

S&F 19/20 mm thick medium density fibre board exterior grade prelaminated one side with decorative choice lamination and other side balancing white including ready made edge binding of same colour MDF board in all ends and fixed with screws to steel/ timber frame work as in cubboard shutters complete all as directed.

S&F solid PVC door frame of size 50 mmX47 mm made out of 5 mm wooden grain printed PVC sheet reinforced with MS Square tube complete all as directed.

Factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded prelaminated PVC sheet on front face and 2 mm thick plain color PVC sheet on back face complete all as directed.

S&F box type steel windows(factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 Note:- The quoted rate a shall also include the following :-(i)One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrte surface(ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long(iii) PCC block for embedding lugs

S&F Mild steel framed works such as grills, framed guard bars, etc and similar work conforming to Fe-290Gde-E-165 complete all as directed.

S&F Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares n exe o.5 sqm each pane complete all as directed.

S&F 300 mm long aluminium anodised sliding dor bolt with hasp staple(bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section complete all as directed.

S&F aluminium anodised barrel tower bolts 200 mm size, and fixed complete all as directed.

S&F aluminium anodised barrel tower bolts 150 mm size, and fixed complete all as directed.

S&F 150 mm aluminium handle cast type complete all as directed.

All as per item No 19here-in-before but 100 mm

S&F Ist class soft wood small fittings such as brackets of any type, shaped door and windows stops and the like article not exe 200 cucm each and fixed complete all as directed.

S&F in repairs, mild steel enamelled helical door spring 300 mm size including roller and roller plate, fixed to wooden/ steel frames by any means as required complete all as directed.

S&F floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as directed.

S&F in repairs 100 mm hasp and staple safety type aluminuium anodised including bolt to hinge plate and fixed with screw complete all as directed.

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as directed.

M&L for preparing pre-primed steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as directed.

Taking down existing cabet and supply & fixing kitchen cabinet made from 18 mm medium density fibre board exterior grade prelaminated Shall be cut to shape & size of shelves complete all as directed.

S&F 12 mm thick medium density fibre board exterior grade fixed to timber/ MDF board frame with self closing type(Daddu) hinges and One no Oval type hadle in each shutter including same colour edge bending as in kitchen cabinate shutter complete all as directed.

S&F in repairs mild steel butt hinges 100 mm medium weight cold rolled complete all as directed.

S&F 30mm width of flaps (when open) continuous (Piano) hinges mild steel bright finish or electro galvanised complete all as directed.

S&F Ball catches with 8mm dia steel ball and brass body with striking plate including letting in and fixed complete all as directed.

Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as directed.

M&L PCC 1:2:4 type B0 (12.50mm graded crushed stone aggregate) , 25 mm thick as in sub top layer of floor and finished rough to receive the floor toping complete all as directed.

M&L for coloured non skid jointless ceramic tiles 6 to7 mm thick , area of each tile exc 0.11sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and including 15 mm thick screed bed or bedding layers of cement mortar 1:4 , pattern, laying etc of tiles and Shade, Colour shall be decided by GE complete all as directed.

All as per item no 34 here-in-before but in vertical surfaces over and including 10 mm thick rendering in cement mortar 1:4.

M&L machine cut kota stone slab flooring 18 to 20 mm laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complte over and including 20 mm thick screed bed in CM 1:6 complete all as directed.

M&L machine cut kota stone slab 16-18 mm thick as in riser,steps and skirting over cement morter laid and jointed with grey cement slurry mixed with pigment to match the shade the slab including griding and polishing complete over and including 10 mm thick plaster in CM 1:6 complete all as directed.

Taking down cement plaster of any thickness including surface finishes like tile etc racking out joints , hacking for key scrubbing down with water in cluding removal of rubbish of the premises complete all as directed.

M & L White glazed ceramic tiles glossy finish of size 300x200x 5-6mm thick in dado’s/skirting etc (1st quality). set and jointed in neat grey cement slurry and pointed in white cement to match the colour of tiles laid over and including 10 mm thick screed layer in CM 1: 4 complete all as directed.

M & L Cement plaster 10 mm thick in cement mortar 1:4 on concrete surface such as soffits of RCC,chajja,roof projection etc finished even and smooth without using extra cement complete all as directed.

M&L for rendering 15 mm thick on fair faces mixing with water proofing compound as per manufacturer instruction (Water proofing compound paid for seperately)of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as directed.

M&L for rendering rough cast plaster complete all as specified complete all as directed.

M&L for rendering 15 mm thick on faces other than fair of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as directed.

Supply only intergal water proofing compound complete all as directed.

M & L for Preparation of newly plastrered surface of any description and applying two coat of exterior emulsion paint over a coat of primer including applying wall putty as per manufacturer instructions complete all as directed.

All as per item No 45 here-in-before but two coat of oil emulsion including applying wall putty as per manufacturer instructions

M & L for Preparation of new surfaces of ceiling and applying three coats of white washing to ceiling surfaces complete all as directed.

M & L for Prepration of old surfaces of ceiling and applying two coats of white wash complete all as directed.

M&L Preparation of old plastered surfaces of wall by complete removing of existing treatment and applying two coats of oil bound distemper over a coat of primer including applying wall putty as per manufacturer instructions complete all as directed.

M & L for Preparation of old plastered surfaces of wall and applying two coat of exterior emulsion paint including applying wall putty as per manufacturer instructions including removal of existing treatment complete all as directed.

M&L for 50mm thick PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 and three part of sand ( all by weight) complete all as directed.

M & L for Preparing surface of sunken slab and applying 15mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor &wall. applying self adhesive, Elastomeric SBS bitumen based waterproofing membrane 1.5mm thick (Aluminium/terracotta) with a high mechanical performance with cross laminated Aluminium film on the upper side and easily removable silicon film on the underside , laid on roofs and sealing all joints after and incl applying bituminous primer (Approved by manufactures ) @ 0.30 ltrs per square meter over clean and dry RCC roof surfaces complete all as specified .(NOTE : The work shall be executed through authorised applicator approved by the manufactures of membrane) both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as directed.

M&L for 14 to 16 mm thick green stone slab (Udaipur) as in cooking plateform etc set in CM 1:4 and griding and polishing and rounding / moulding the edges complete the finish shall be granite finished for top & edges of slab including dismentling existing stone slab complete all as directed.

Taking up or down GI tubing 15mm bore including cleaning for refixing complete all as directed.

All as per item No 54 here-in-before but 20mm bore complete all as directed.

Supply and fixing 15 mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as directed.

All as per item No56 here-in-before but refixing old servicable pipe complete all as directed.

Supply and fixing 20mm tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as directed.

All as per item No 58 here-in-before but refixing old servicable pipe

S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed complete all as directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, , screwed both ends for iron pipe complete all as directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 15 mm bore, , screwed both ends for iron pipe complete all as directed.

S&F in repairs 15mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high presure with capstan head handle, screwed both ends for iron pipe or for unions complete all as directed.

S&F in repairs 15mm bore angle cock, cast copper alloy CP, fency type high presure with capstan head handle, screwed both ends for iron pipe of for unions complete all as directed.

S&F in repairs shower rose brass cromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 225 mm long made to shape complete all as directed.

S&F Drapery curtain rod of metalic 20mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as directed.

S&F Stainless steel sink 1mm thick overall size 915mm X460mm bowl size 410x330x160mm with drainage board fixed in repair with plush washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed.

Dismantling water tanks exceeding 500 & not exceeding 1000 litre complete all as directed.

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as directed.

Supply and fixing in repairs vitreous chinaware water closet (Squat pattern) long pan of size 580mm x 440mm white with ‘P’ or ‘S’ trap front or back inlet and a pair of foot rest complete including provision of cement concrete bedding complete all as directed.

Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stain less steel with long bend of 32mm dia complete all as directed.

S&F in repair PVC Connection 15mm size with PTMT nuts of length 450mm long complete all as directed.

S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screw and wooden/Plastic cleats(Minimum weight 190 Gm) complete all as directed.

S&F shelf of PTMT with and including chromium plated brass screw and wooden cleats(Minimunm weight 300 Gm) complete all as directed.

S&F soap dish, 1mm thick stainless steel fancy type, fixed to plugs with chromium plated brass screws complete all as directed.

S&F Cabinet mirror plastic body for toilet of size450X600mm with 4mm thick looking mirror complete all as directed.

Demolition of brickwork/stone masonary built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles; complete all as directed.

M & L Brickwork with sub class `B` old size well burnt brick straight or curved on plan exc 6 metre mean radius built in cement Mortar 1:6 complete all as directed.

All as per Srl item No.78 here-in-bebore but except brick, complete all as directed.

M&L for flush pointing to brick wall in CM 1:4 complete all as directed.

S&F grating round 100/75 mm size PTMT (minimum weight 50 Gm)complete all as directed.

Supply and fixing in repairs stainless steel plate rack of size 75X75X25 cm made of 0.55 mm thick thick sheet complete all as directed.

S&F in repairs MS Peg set of six power coated as approved by GE complete all as directed.

M & L for Removing existing treatment from roof surfaces , including brick tiles etc and cleaning the surface of all foreign material such as fungus, moss , dust etc by wire brushing and dusting including 10mm thick plaster in CM (1:4) finished surfaces even and smooth and applying self adhesive, Elastomeric SBS bitumen based waterproofing membrane 1.5mm thick (Aluminium/terracotta) with a high mechanical performance with cross laminated Aluminium film on the upper side and easily removable silicon film on the underside , laid on roofs and sealing all joints after and incl applying bituminous primer (Approved by manufactures ) @ 0.30 litres per square meter over clean and dry RCC roof surfaces complete all as specified .(NOTE : The work shall be executed through authorised applicator approved by the manufactures of membrane) complete all as directed.

S&F cement concrte 250X250X22 mm thick machine pressed set and jointed in cement sluury and pointed in grey cement mixed with cresote oil including 15 mm thick bedding layer in CM 1:4 in roof complete all as directed.

M&L for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as roof kerbs rounded or chamfered on edges complete all as directed.

M&L 75 mm thick plain cement concrete 1:3:6 type C2, using (40mm graded stone aggregate) as in sub base of floors over and incl earth filling complete all as directed.

M&L factory made Precast hand crafted cement concrete M-40 grade,interlocking paver block 300X300X22mmthick polymer moulded using white cement and pigments as per design/pattern approved by Engr-in-charge over and including 20mm thick screed bed in cement mortar 1:4 complete all as directed.

Taking up or down CI pipes (incl all fittings), with spigot and socket ends and lead joints incl burning out joints and removing lead of 100/75mm dia pipe

M&L Cast iron soil, waste and vent pipe of bore 100mm sand cast in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

M&L Cast iron soil, waste and vent pipe of bore 75 mm sand cast in any length with or without ears with cement joints fixed to wall complete all as directed.

All as per item No91 here-in-before but of bore 75mm under floor.

M&L Cast iron bends (any redius) diminishing pieces or tapes of size 100mm with inspection eye complete all as directed.

All as per item No 93 here-in-before but 75 mm

Supply and fixing cast iron 100 mm bends with duck's foot or heel rest complete all as directed.

Supply and fixing cast iron 75 mm bends with duck's foot or heel rest

Supply and fixing CI branch pieces (Tee) single (equal or unequal) ordinary or inverted fitted or with parrel branches with oval access door of size 100mm complete all as directed.

Supply and fixing Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 75 mm bore pipe complete all as directed.

Supply and fixing Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 100mm bore pipe complete all as directed.

Supply and fixing Cast iron floor trap with 75mm dia out let with stainless steel grating including jointing to waste pipe in run lead complete all as directed.

Supply and fixing CI cowl of 75mm bore complete all as directed.

Supply and fixing 100 mm cast iron sanitary connection short connection upto 300 mm long complete all as directed.

Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 100 mm pipe complete all as directed.

Extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joint for 75 mm pipe complete all as directed.

Extra for CI fittings fitted with Ovel access door 100mm

Extra for CI fittings fitted with Ovel access door 75mm

Demolition of cinder concrete of any description and in any position and removing the rubbish from work site complete all as directed.

Taking down cement plaster and decayed concrete if any upto double storey construction from roof projection,chajja,concrete surfae of any description and making good the decayed portion in cement morete 1:3 or with PCC 1:2:4 using formwork if any and finally finished with 10 mm thick cement plaster 1:3 to match the existing surface complete all as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants,regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody if reused at site and making good disturbed surface of walls, floors, etc.complete all as directed.

Taking down carefully by unscrewing from board/outlet boxes, fitting and fixtures such as MCB DBs alongwith MCBs etc and keeping aside if reused at site complete all as directed.

Material and labour for point wiring for the followings with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC canciled conduit including necessary accessories like bends, tees PVC square and elbow etc fixed in wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as directedfo the following:- (a) One light/fan point controlled by one,one way switch.

(b) One bell point controlled by one push button switch.

(c) One 3 Pin 5 Amps socket out let point on independent board.

(d) One 3 Pin 5 Amps socket out let point on same bord alongwith other switch.

(e) One light point controlled by two, two way switch.

All as per item No 111 here-in-before but using 2.5 sqmm PVC FRLS insulated copper condutor wire for connecting 15 Amp socket on independent board.

Supply and fixingof switch piano flush type 240 Volts 5 Amps, SP, one way complete all as directed.

Supply and fixingof switch piano flush type 240 Volts 5 Amps, SP, two way complete all as directed.

Supply and fixing of bell push piano flush type one way 240 Volts 5 Amps complete all as directed.

Supply and fixing of switch socket outlet multipurpose 3 Pin,5 Amps, 240 volts(with 2 pin 5 Amps outlet also) flush type (non shuttered) complete all as directed.

Supply and fixing of socket outlet multipurpose 2 in 1, 3 Pin,5 Amps, 240 volts(with 2 pin 5 Amps outlet also) flush type (non shuttered) complete all as directed.

Supply and fixing switch socket out let combination multipurpose 3 pin, 15 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as directed.

Supply and fixing ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed.

Supply and fixing LED inegrated battan T5 indoor decorative type 20W luminaire prewired fixed to wall/ceiling including provision) for mounting the fittings and electrically connecting with three single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting complete all as directed.

Supply & fixing ceiling fan regulator electronic,Deluxe,rotary, step type, 120/280Volt.complete all as directed.

Supplying and fixing sheet metal enclosures for MCB's distribution board TPN, 4 way with 200 Amps rated bus bar at 415 Volts, double door complete all as directed.

All as per item No 122 here-in before but of 8 way SPN, 240 Volts.

Supplying and fixing MCB SPN 32 Amps 'B' series 10 kA, 215 Volts complete all as directed.

Supplying and fixing MCB SP 'B' series 06amp to 32 amp.complete all as directed.

Supplying and fixing PVC Blanking plate, 01 module suitable for MCB DB complete all as directed.

Supply and fixing bell electric, 240 Volts, single polecomplete all as directed.

S&F Sub main wiring with four runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 Volts grade drawn through and including PVC casing caping of adequate size and surface with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing caping and connected to common earth dolly, including taking out the old (Note:- Two run of cable one run of casing caping and one run of earth continuity wire shall be measured as one running metre) complete all as directed.

S&F XLPE insulated,armoured heavy duty electric cable with aluminium conductor, 1100 volts grade,cross-sectional area 25sqmm ,4 core complete all as directed.

S&F LED Bulk head fittings in plastic housing with clear prismatic diffuser suitable for and including 6W LED lamp, making necessary connection with three single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting complete all as directed.

Supply and fixing Bulb holder angular PVC/Polycarbonate suitable for batten fittings complete all as directed.

Supply & fixing LED rtrofit lamp10 watt B22 holder base with polycarbnate body and aluminium heat sink warm complete all as directed.

M & L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized iron strip 25mm x 4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel all shown in electric plate No. 3 (of SSR Part-I) connected to earthing test point all as specified or indicated including provision of necessary excavation and earth work in any type of soil, PCC(1:3:6) type C-1 pit chamber with precast RCC (1:2:4) type B-1 , 40 mm thick cover reinforced with 6mm round MS bars in both ways , 20 mm bore medium grade watering pipe, water funnel, 40 mm bore GI medium grade protection pipe, common salt, charcoal dust, returning, filling in of soil, removal of spoil to a distance not exceeding 50 metres etc including testing on completion complete all as directed.

S&F Exhaust fan 250 mm sweep with louvers including cutting of wall and making good disturbed surface with single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable upto ceiling rose complete all as directed.

S&F Isolator 63 Amp. TPN ,240 volts. complete all as directed.

Excavation in trenches not exceeding 1.5 metres wide and not exceeding 1.5 metres in depth for foundation of pole, stays, installation board etc and getting out in hard/dense soil including cutting and removing pole foundation concrete complete all as directed.

Returning filling in including watering and well ramming in layers not exceeding 25 cm thick complete all as directed.

Removing excavated soil to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as directed.

M&L for sand filling using approved sand in trenches as sand cushioning to underground cables in a layer of sand 8cm thick before laying and 15cm thick after laying the cable including spreading, levelling, and consolidation all as specified. (Note :-consolidated sand thickness only to be measured).

M&L for Continuous brick covering; using old size burnt clay sub class 'B' bricks with width equal to the length of the brick, laid dry .

KAILASH TRADERS

M/s Darshan lal Govt Contractor