Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.0 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹31.2 L+₹1.6 L (5.40%)Rejected-Finance 145H 2G AQAMA MODEL APARTMENT LUKERGANJ PRAYAGRAJ UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹36.2 L+₹6.5 L (22.0%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
WELCOME MAINT TO OFFRS MD ACCN UNDER AGE BR-II AT NEW CANTT PRAYAGRAJ
2023_MES_600692_1
8618/E8
Open Tender
Civil Works
Item Rate
270 days
GE WEST PRAYAGRAJ
Class D category a i
8 documents required · 8 mandatory
₹500
Yes
GE WEST PRAYAGRAJ
₹88,000
26 Jul 2023
2 Jun 2023
27 Jun 2023
2 Jun 2023
26 Jun 2023
14 Jun 2023
Amount
Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete.
M & L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed with following:- (a) M & L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25 x 25 mm x 0.5mm (b) S & F 1.6mm dia GI wire suspenders with adjustable clamps and dash free fasteners with rawl plug and screws plugging in RCC slab placed @ 605mm centre to centre from perimeter of wall. (c) S & F 25x25x0.5mm thick GI tee powder coated as main and cross members at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S & F 4mm thick E-boards of approved texture and finished ceiling tiles of size 595 mm x 595 mm , confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame complete all as specified and directed.
S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on other fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of anti fungal exterior emulsion paint (Apex/Weather coat/Weather shield) white or tinted as approved complete all as specified and directed. Note :- The work shall be carried out by mechanical sprayer. Contractor are deemed to quote the rate accordingly.
M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over & including 2 mm wall care putty complete all as specified and directed. Note :- The work should be carried out by mechanical sprayer. Contractor are deemed to quote the rate accordingly.
M& L Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete.
Dismantling, floor hearth or wall tiling including cement mortar bedding and removing rubbish complete all as specified and directed.
M&L for non skid, ceramic “coloured” tiles of premium or first quality 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed.
M&L for Ist class premium quality of Glazed ceramic coloured digital tiles Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed.
M&L for Ist class premium quality of Glazed ceramic coloured digital tiles 300 mm x 450 mm or 300 mm x 600 mm x 7 mm thick, in vertical surfaces / skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed
M&L for Vitrified Ceramic light shade double charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F vitrified tiles, coloured, Double charged, superior quality 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as Dado/Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
S&F in repair vitreous china wash basin, white, flat back type of size 550x400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling and waste pipe complete all as specified and directed.
S&F in repair vitreous china counter top wash basin, white, oval shape of size 600x400x185mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. Make: Jaguar Cat Part No. SLS-WHT-6601 or Equivalent make as specified in P.S.
S&F in repair Brass chromium plated 32mm bore bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed. Make: Jaguar Cat Part No. ALD-769L300x190/ ALD-769L250x190 or Equivalent make as specified in P.S
S&F in repair pillar taps 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaguar Cat Part No. CON-021KN or Equivalent make as specified in P.S
S&F in repair 15mm dia Brass Chromium Plated mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. Make: Jaguar Cat Part No. CON-167KNB or Equivalent make as specified in P.S.
S&F in repair sink mixer 15mm dia Brass Chromium Plated mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. Make: Jaguar Cat Part No. CON-319KN or Equivalent make as specified in P.S.
S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete all as specified and directed including provn of cement concrete bedding and connection to trap, outgoing flushing pipe etc. complete all as specified and directed.
S&F in repair fancy type Chromium plated brass stop cock/ angle valve for 15mm bore pipe, fixed in repairs complete all as specified and directed. Make: Jaguar Cat Part No.CON-059KN or Equivalent make as specified in P.S
S&F in repair, two way angle valve chromium plated, brass 15mm bore complete all as specified and directed. Make: Jaguar Cat Part No.CON-041KN or Equivalent make as specified in P.S.
S&F in repair rubber door seal 32 mm wide with aluminium strip of size 19mm wide fixed with machine steel with washer complete all as specified and directed.
S&F in repairs plastic seat cover white of pattern W.C including fixing device and Chromium plated nuts, complete all as specified and directed.
S&F in repair china wash down water closet pan (pedestal pattern) white trap including plastic water closet seat cover white/coloured with flat bottom and mild steel chromium plated or aluminised hinging device, connection to drain (or outgoing pipe) pipe and flushing pipe , anti syponage pipe, etc complete including making good to the floor complete all as specified and directed.
S&F in repairs flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, complete all as specified and directed.
S&F in repair Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and directed.
S&F in repair figured glass 4mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repair CP brass toilet paper holder, superior quality complete all as specified and directed. Make: Jaguar Cat Part No.ACN-1151N or Equivalent make as specified in P.S
S&F in repair CP brass, soap dish, superior quality complete all as specified and directed. Make: Jaguar Cat Part No.ACN-1131N or Equivalent make as specified in P.S
S&F Health faucet including PVC pipe 1.20m long with brass nuts for EWC, fixed in repairs complete all as specified and directed. Make: Jaguar Cat Part No.ALD-565 or Equivalent make as specified in P.S
S&F in repair PVC connection 15mm dia and 450mm long with 2 Nos PTMT nuts, complete all as specified.
S&F in repair Grating doom 125mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified.
S&F in repair PVC waste pipe 60 cm long for WHB / sink with cup, complete all as specified.
S&F in repair PVC mirror cabinet, coloured of size 350 x 450 mm fixed with screw and PVC gutty on wall complete all as specified and directed. Make:Prayag Cat part No. 557 or equivalent as approved.
S&F in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. Make: Jaguar Cat Part No.CON-107KN or Equivalent make as specified in P.S
S&F in repair Spindles for 15mm bore, brass or CP stop cocks, bib taps , basin mixer etc, complete all as specified and directed.
S&F in repair PVC low level flushing cistern of 10 lit capacity including siphon float valve, rubber cone and flush pipe, Brackets etc complete all as specified and directed
S&F in repairs 450 mm long braided hose with two 15mm Nuts and Rubber washers, complete all as specified and directed.
S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make: Jaguar Cat Part No. ACN-1171N or Equivalent make as specified in P.S
S&F in repairs mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S & F in repair corner glass self assembly complete all as specified and directed. Make: Jaguar Cat Part No. ACN-1173 or Equivalent make as specified in P.S.
S & F in repair Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed. Make: Jaguar Cat Part No.COP-083KPM or Equivalent make as specified in P.S
S & F in repair Towel ring chromium plated complete all as specified and directed. Make: Jaguar Cat Part No. ACN-1121BN or Equivalent make as specified in P.S
S&F in repair Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified. Make: Jaguar Cat Part No. ACN-1111SM or Equivalent make as specified in P.S
Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.
Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.
S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia with new fittings complete all as specified and directed.
Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm dia with new fittings complete all as specified and directed.
Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified.
Dismantling water tanks capacity exc 250 ltr & n ecx 500 ltr and removing to store
Dismantling water tanks capacity exc 500 ltr & n ecx 1000 ltr and removing to store
S&F rotational moulded,multilayer (three layer) HDPE water storage tank white colour of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minimum weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&F rotational moulded,multilayer (three layer) HDPE water storage tank white colour of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minimum weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
M & L for Cleaning and removing all scale and dirt, etc, from tanks capacity exc 250 & n. exc 500 litres and from mouths of circulating pipes, etc complete all as specified and directed.
M & L for Cleaning and removing all scale and dirt, etc, from tanks capacity exc 500 & n. exc 1000 litres and from mouths of circulating pipes, etc complete all as specified and directed.
S&F in repairs Ball Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) as fixed in repair
Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete.
S & F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore complete.
S & F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75mm bore complete.
S & F in repair PVC (SWR) bends any radius, 110 mm bore complete.
S & F in repair PVC (SWR) bends any radius, 75 mm bore complete.
Supply & Fix in repair for wall mixer with connecting legs and wall flanges with provision for overhead shower with 115 mm 15mm dia chromium plated brass and securing to walls complete. Make: Jaguar Cat Part No. CON- CHR-281KN or Equivalent make as specified in P.S.
Supply and fix/fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board plain sheet complete all as specified & directed. Make : Rajshree or equivalent all as specified and approved by Accepting Officer. Note: Kitchen accessories i.e. baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only
Supply and fix/fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board laminated sheet complete all as specified & directed. Make : Rajshree or equivalent all as specified and approved by Accepting Officer,
Supply only in repair stainless steel accessories suitable for kitchen cabinets as under:-
(a) Stainless steel basket (plain) of size 50cmx37cmx10cm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/POB/15204 or equivalent make as specified in P.S.
(b) Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/TB/15208 or equivalent make as specified in P.S.
(c) Stainless steel Plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/PTH/15206 or equivalent as approved by GE
(d) Stainless steel Partition basket of size 50cmx37cmx16cm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/PRT/17206 or equivalent make as specified in P.S.
(e) Stainless steel Cutlery basket of size 50cmx37cmx10cm made of 4mm thick S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/CUT/15204 or equivalent make as specified in P.S.
(f) Stainless steel basket (plain) of size 50cmx37cmx16cm made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/POB/15206 or equivalent make as specified in P.S.
(g) Stainless steel bottom full out of size 50cmx40cmx16cm in two tier made of 4mm thick S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No FF/BPO/62018 or equivalent make as specified in P.S.
(j) Telescope basket (channel) 18/20inch length extruded MS galvanised over rollers of approved make all as specified & directed.
(k) Magnetic catches with steel body ‘H’ type, fixed to shutter complete.
(m) Brass handle of 150 mm dia fancy type polished bright finish complete.
(n) Brass handle of 100 mm dia fancy type polished bright finish complete
(o) Continuous (Piano) hinges, mild steel , bright finish, 30 mm width of flaps (when open).
S&F for Rolled mild steel hollow sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, posts etc fixed with angle cleats or other connecting plates complete all as specified.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges complete.
S&F for fibre glass reinforced translucent corrugated sheeting, 2 mm thick, with two corrugation side lap fixed with coach screw and washer in roof, wall etc. complete all as specified.
M & L Prepainted galvalume aluminium zinc coating GI based corrugated colour steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.
Taking down chowkhat or frame with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed.
Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.
Taking down shutters of any description n. exc 1 sqm each complete all as specified & directed.
Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.
Refixing shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware and renewal of unserviceable screws complete all as specified & directed.
Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware and renewal of unserviceable screws complete all as specified & directed.
S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete.
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) M.S. hold fast/ lugs or SS dash fasteners shall be paid separately under respective item.
M & L for Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified & directed.
M&L for mild steel framed work such as grill ,gates, guard bar, framed with welding using angle iron, square bars and round bars section etc including cutting, welding, revetting complete all as specified & directed.
M&L for preparation of new or previously untreated surfaces of steel or Iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red Oxide primer complete all as specified and directed.
S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. (Note: stainless steel butt hinges and necessary S. S. screws shall be paid separately under respective item.
S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed.
S&F 2nd class hardwood factory made, 30 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass, gauze etc (with sash bars) , divided into squares, with plain, chamfered or rounded, mitred and rebated sash bar any numbers for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified & directed.
S&F for 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etcor provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) complete all as specified & directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed
M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified.
M&L for PCC 1:2:4 type B-1 using (20mm graded stone aggregate) as in bed blocks for hold fast complete all as specified & directed.
S&F mild steel bends strips , hold fast or small articles of FI or angle complete all as specified.
S & F for stainless steel M S Wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.
S & F Solid PVC moulded door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F factory made Solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2, raised panel design with 2 mm thick moulded Prelam on front face and 2 mm thick prelam PVC sheet on back side completed all as specified and directed.
S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed
S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed
S&F 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed
S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge pin anodized type C-21 complete all as specified and directed.
S&F 100mm long Mild steel cold rolled medium weight butt hinges with mild steel hinge pin complete all as specified and directed.
S&F 75mm long Mild steel cold rolled medium weight butt hinges with mild steel hinge pin complete all as specified
S&F 150mm long extruded aluminium alloy handle fabricated type anodized. complete
S&F 100mm long extruded aluminium alloy handle fabricated type anodized. complete
S&F in repair powder coated anodised aluminium powder coated Grill of size 75 x 75x 4mm thick for windows , including joining cleat, anodized aluminum strip beading screw complete all as specified & directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc and removing rubbish complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 950 mm X 510 mm with bowl size 410 mm x 410mm x 230 mm complete all as specified and directed.
S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 610 mm x 510 mm with bowl size 560 mm x 460 mm x 240 mm , fixed in repairs complete all as specified and directed.
S&F in repair Stainless steel plate rack(Utensil Rack) of size (600mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed.
S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S&F in repair 75mm dia PVC (SWR) floor/Nahani trap with gratings including jointing to waste pipe, fixed in plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) and jointed in run lead complete all as specified and directed.
S & F in repairs shower CP fancy type 100 mm including shower arms complete all as specified and directed.
S&F in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bush 25mm dia long (high) fixed to door shutter with steel screw complete all as specified.
S&F in repairs 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F in repair 125mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.
S&F in repair 150mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.
S&F in repair 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.
S&F in repair 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F in repair 25mm dia PVC coated mild steel , curtain rails/ drapery rod including end brackets and end knobs, stops, rollers complete all as specified and directed.
S&F in repair brass chromium plated waste coupling for S.S Sink with rubber washer plug etc complete
S&F in repair brass chromium plated waste coupling for wash hand basin with rubber washer plug etc complete
S& F in repair cupboard Lock , grade I size 50mm, brass body 2 levers , vertical type complete all as specified. Make Godrej/Link
M&L for preparing plastered or unplastered old decorated surfaces of wall including cornices etc by brooming down or steel wire brushing ,scrapping down smoke shoot, moulds, mos and efflorescent salts and trading oil and greasy spots, removal of vegetation and applying one coat of white wash on wall surfaces complete all as specified and directed.
M&L for preparing plastered or unplastered old decorated surfaces of wall including cornices etc by brooming down or steel wire brushing ,scrapping down smoke shoot, moulds, mos and efflorescent salts and trading oil and greasy spots, removal of vegetation and applying Two coats of white wash on wall surfaces complete all as specified and directed.
M&L for preparing plastered or unplastered old decorated surfaces of Ceiling including cornices etc by brooming down or steel wire brushing ,scrapping down smoke shoot, moulds, mos and efflorescent salts and trading oil and greasy spots, removal of vegetation and applying one coat of white wash on Ceiling surfaces complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr,the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint supplier and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower & masking tape Including cleaning of entire surface complete all as specified and directed. Note: Sanding of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr,the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint supplier and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower & masking tape Including cleaning of entire surface complete all as specified and directed. Note: Sanding of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for complete removal of existing finishes of wall including cornices etc and applying 1-2mm thick white putty in one or two coat and applying two coat oil bound distemper over a one coat of exterior water based primer by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for preparing old decorated surfaces of wall including cornices etc by washing rubbing down and stopping of distempered surfaces, making surfaces smooth and applying one coat of oil emulsion distemper white or tinted of approved shade over a coat of white cement based putty complete all as specified and directed. The work should be carried out by mechanical sprayer.
M&L for preparing old painted surfaces of wood or wood base materials of any description not otherwise described, surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing old painted surfaces of steel of any description not otherwise described, surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for complete removal of existing finishes of wall including cornices etc and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
Taking down plaster from edges of RCC chajja or corners where steel reinforcement coming outs and filling with 15mm thick rendering in CM (1:3 ) and apply Two coats of cement base paint over a coat of primer to match with the existing shade/colour of buildings complete all as specified and as directed. Note :- Necessary scaffolding upto two story will be provided by contractor and unit rate will be deemed including this aspect.
M & L for writing letters or figures (block, Roman, Italic or Indian) n.exc 30 cm height for writing Bldg Nos, Block Nos and Quarter Nos etc. upto two story including provn of scaffolding complete all as specified and as directed.
M&L for complete removal of existing treatment from old decorated surfaces of wall including cornices etc by using metal plate, wire brush etc applying 1mm thick white cement based wall care putty (Make : Birla/ JK White) and applying Two coats of Synthetic Enamel Paint white or tinted of approved shade over a coat of primer upto two story including provn of scaffolding complete all as specified and directed. Note :- Necessary scaffolding upto two story will be provided by contractor and unit rate will be deemed including this aspect
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc
M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including cement mortar bedding (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at the length n exe 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed .
M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof padding, in leveling course, benching, mud stops etc, complete all as specified and directed
S&F exterior finish designer pavement tiles, coloured, superior quality, 300x300x10mm thick as in floors/ pavement etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for providing PCC 1:4:8 type B-2 (using 40mm graded stone aggregate ) as foundations, filling, and mass concrete etc complete all as specified and directed.
M&L for 60mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded, coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.
M&L for factory made coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L applying two coat of sure seal damproof chemical on plaster/unplastered surfaces as per manufacturer instruction complete all as specified & directed .
YASH ENTERPRISES
M/S JAI DURGA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .