Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹7.6 L
EMD Value
₹7,600
Closing Date
15 Jul 2020, 2:00 pmClosed
SECM
NCTPS I CHENNAI 120
Providing water supply arrangements for drinking and service water purpose to various offices inside NCTPS I premises
2020_EB_170238_1
2020_NCTPS I_SECM_49
Open Tender
Civil Works
Works
60 days
NCTPS I
Refer Tender document
2 documents required · 2 mandatory
₹0
₹7,600
Yes
27 Jul 2020
2 Jul 2020
16 Jul 2020
2 Jul 2020
15 Jul 2020
3 Jul 2020
Amount
Earth work excavation and depositing on bank with an initial lead and lift in sand, silt, loose soil, wet sand (or) silt not under water, light black cotton soil and ordinary soil including cost of refilling the earth, labour, lift, T&P etc, and as directed by the Engineer at site
Dismantling of damaged RCC roads and disposing the same away from the site as directed by the engineer at site including cost of labour, lead, lift, T&P, etc., complete.
Providing and fixing of various dia of PVC pipe of 10 kg / cm2 approved quality and make including fixing of PVC specials cost of all materials labour, lead lift etc complete.(scrap MS pipe will be supplied by Dept.) A. 63 mm dia
B. 50 mm dia
C.32 mm dia.
D. 25 mm dia
Providing & fixing various accessories such as wheel valve and non return valve including cost of all materials, lead, lift, labour, T&P, etc complete. A. 63 mm Wheel valve
B. 50 mm Wheel valve
C. 32 mm dia valve
D. 25 mm Wheel valve
Replacing of GI pipe "B" class by HDPE pipes along the cable rack with necessary GI clamp and resting the pipe over the M.S angle stand including cost of all materials labour, lead lift etc complete. A. 32 mm dia HDPE pipes
Providing and placing RCC 1:2:4 using 12 to 20 mm HBG metal including cost of all materials, lead ,lift, labour excluding the cost of reinforcement etc, complete.
Providing and commionsing of 10 HP mono block pump suitable for 63mm dia pipe of ISI make SUGUNA or equivalent and required starter etc complete of approved quality and standard specification, labour charges for erection and directed by the Engineer at site. Engineer at site.
Providing fixing and electrifying 3 Phase 10 H.P, submersible motor with pump (500Lpm x 40m) of SUGUNA make or equivalent make suitable for delivery pipe of 63mm dia. with suitable panel board consisting of starter, Ammeter, volt meter, relay, fuses, etc, horizontal non return valve suitable for 63mm dia PVC pipe and 4 sq.mm electric cable for electrification as directed by the dept. engineer at site including cost of all materials available with ISI make, labour, lead, lift, etc complete
Providing plain cement concrete 1:4:8 using 40 mm HBG metal including cost of all material, labour, lead, lift, curing etc complete.
Providing Random Rubble masonry in CM 1:6 using rough and bond stones including the cost of all materials, lead, lift, labour, curing, etc., complete as directed by the dept . Engineer at site.
Providing plain cement concrete 1:2:4 using 20 mm HBG metal including cost of all material, labour, lead, lift, curing etc complete.
Brick work in CM 1:5 using fly ash bricks including cost of all materials, lead, lift, labour, curing, etc., complete as directed by the dept . Engineer at site.
RCC 1:11/2:3 using 20 mm HBG metal for roof concrete including cost of all materials, lead ,lift, labour, shutterring charges and mixing charges excluding the cost of reinforcement etc, complete as directed by the dept Engineer at site.
Providing cutting, bending, lapping and placing in position of RTS rods and binding with binding wire including cost of all materials, labour for bending rod, lead, lift, etc complete, as directed by the Dept. Engineer at site.
Plastering in CM 1:5,12mm thick including cost of all materials, lead, lift, labour, curing, etc., complete as directed by the dept Engineer at site.
Providing colour washing of two coats using first quality of plastic emulsion paint of approved make and colour over one coat of white cement primer for interior walls including cost of all materials, lead, lift, labour,T & P etc., complete.
Providing and fixing steel door with wall angle of size 40x40x5mm angle as outer frame 35x35x5mm and M.S sheet 18 gauge for covering including cost of all materials, fabrication charges and two coats of enamel paint over The priming coat all lead, lift, etc., complete.
Providing and fixing of fixed louvers including the cost of all materials ,labour ,lead ,lift, T&P etc., complete
JAYAM ENTERPRISES
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .