Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.2 LAccepted-AOC MES CHOWPATTI HASIMARA DIST JALPAIGURI WB PIN 735215 | HASIMARA | JALPAIGURI | WEST BENGAL | 735215 | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹47.6 L+₹3.2 L (7.22%)Rejected-Finance | L2 | Rejected-Finance Other than L1 BIDDER | |
| 3 | L3₹47.9 L+₹3.5 L (7.84%)Rejected-Finance | L3 | Rejected-Finance Other than L1 BIDDER | |
| 4 | L4₹48.6 L+₹4.2 L (9.44%)Rejected-Finance | L4 | Rejected-Finance Other than L1 BIDDER | |
| 5 | L5₹50.3 L+₹5.9 L (13.2%)Rejected-Finance | L5 | Rejected-Finance Other than L1 BIDDER |
| Sl No | Description | Qty | Unit | M/S. NARENDRA KUMAR GARG L4 | M/S BISHAL ENTERPRISES L2 | M/S RATHIN ENTERPRISES L3 | M/S ROY ENTERPRISE L5 | BHARAT ELECTRIC L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | EPOXY COATING
(a) Surface preparation:
All dust and debris should be removed prior to application of the product or its primer. Concrete substrates must be mechanically prepared using abrasive cleaning to remove cement laitance, existing coatings and achieve a gripping profile that is clean, dry and free from laitance, dirt, grease, oil and any other form of surface contamination. Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed. Repairs to the substrate, filling of blow holes/voids and surface levelling must be carried out using appropriate products. High spots must be removed by grinding. All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum.
(b) Priming:
All surfaces primed with Nitoprime 25 or Shali Prime 25, 2K or equivalent in performance in makes specified in PS, two component epoxy based primer with good penetrating properties for concrete surfaces. Prior to mixing, stir Part A mechanically. When all of Part B has been added to Part A, mix continuously for 3 minutes by slow speed drill ( 400 - 500 rpm) fitted with a suitable mixing paddle or other suitable equipment until a uniform has been achieved. Wait for 5 minutes to ensure escape of entrapped air. Once mixed, the primer should be applied immediately to the prepared substrate using stiff brushes or rollers. Ensure that Nitoprime 25 or Shali Prime 25, 2K or equivalent in performance in makes specified in PS, is allowed to dry for 6-12 hours or overnight for drying for subsequent coating.
(c) Epoxy Coating:
Providing and applying epoxy resin floor coating shall be Nitoflor FC150 Shali Floor 5 or TC ZHBE or equivalent in performance in makes specified in PS, a solvent free system based on epoxy resins and curing agents specially selected for their ability to withstand chemical attack. The system consists of pre-weighed base & hardener components and a colour pack, all of which contain reactive elements that are essential to the installation of the system and shall have the total dry film thickness after two coating shall be a minimum of 400 microns and shall have a compressive strength of 70 N/mm2, flexural strength of 40 N/mm2 and a tensile strength of 20 N/mm2. The floor shall be prepared and the coating mixed and applied in accordance with the manufacturer’s specification, complete as per specification and directed. | 7,000 | Sqm | 458 ₹32,06,000 | 440 ₹30,80,000 | 451 ₹31,57,000 | 480 ₹33,60,000 | 432 ₹30,24,000 Lowest |
| 2.00 | Bay Line Marking
Apply masking tape before application of bay marking of 100mm width. Stir the component A and component B of Nitoflor FC150 or Shali Floor SL TC 2HBE or equivalent in performance in makes specified in PS, separately. Mix hardener gradually into the base under continuous stirring. After mixing, apply Nitoflor FC150 or Shali Floor SL TC 2HBE or equivalent in performance in makes specified in PS, by brush or roller to the required thickness on the dried primer Nitoprime 25 or equivalent in performance in makes specified in PS, is a high build coating and in advisable to apply two coats at right angles to each other. This way the second coat will cover any burnishes of the first coat. Allow first coat to become tack free before the second coat is applied. Generally, second coat is applied after overnight curing the first coat). Remove the masking tape immediately after application of Nitoflor FC150 or Shali Floor SL TC 2HBE or equivalent in performance in makes specified in PS, complete all as specified and directed.
(Note for item No 1.00 & 2.00 : The work shall be got carried out from company approved applicator. Contractor shall submit requisite documents and get the applicator approved before commencing the treatment.) | 160 | RM | 226 ₹36,160 | 230 ₹36,800 | 223 ₹35,680 | 237 ₹37,920 | 215 ₹34,400 Lowest |
| 3.00 | Taking down cement plaster of any description any thickness including racking out joints hacking for keys, scrubbing down with water etc, including disposal of debris and rubbish to a distance not exceeding 100m, complete all as specified and directed. | 170 | Sqm | 68 ₹11,560 | 70 ₹11,900 | 67 ₹11,390 | 72 ₹12,240 | 65 ₹11,050 Lowest |
| 4.00 | M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed.
(Note : WPC shall be measured and paid separately) | 90 | Sqm | 404 ₹36,360 | 412 ₹37,080 | 398 ₹35,820 | 424 ₹38,160 | 370 ₹33,300 Lowest |
| 5.00 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed. | 1.6 | Ltr | 179 ₹286.4 | 182 ₹291.2 | 176 ₹281.6 | 187 ₹299.2 | 170 ₹272 Lowest |
| 6.00 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed. | 90 | Sqm | 89 ₹8,010 | 91 ₹8,190 | 88 ₹7,920 | 94 ₹8,460 | 75 ₹6,750 Lowest |
| 7.00 | M&L 15mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. | 60 | Sqm | 357 ₹21,420 | 364 ₹21,840 | 352 ₹21,120 | 374 ₹22,440 | 320 ₹19,200 Lowest |
| 8.00 | M&L for rendering 5mm thick in CM (1:3) on fair faces of ceiling surfaces, finished even and smooth (without using extra cement), complete all as specified and directed. | 20 | Sqm | 263 ₹5,260 | 268 ₹5,360 | 259 ₹5,180 | 275 ₹5,500 | 220 ₹4,400 Lowest |
| 9.00 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. | 20 | Sqm | 29 ₹580 | 30 ₹600 | 29 ₹580 | 31 ₹620 | 28 ₹560 Lowest |
| 10.00 | M&L for preparation of old painted steel or iron surfaces of any description n. exc. 10cm in width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed. | 50 | Sqm | 53 ₹2,650 | 54 ₹2,700 | 52 ₹2,600 | 55 ₹2,750 | 45 ₹2,250 Lowest |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
14 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) HASIMARA
GE (AF) HASIMARA, PO-HASIMARA, DIST- ALIPURDUAR, PIN-735215
REPAIR/MAINT OF HANGER FLOOR AND ALLIED ITEMS IN TECH AREA AND DAY TO DAY MAINT OF B/R NATURE RELATED TO COMPLAINTS IN RS AREA AND TIPNIS AREA AT AFS HASIMARA
2025_MES_720178_1
C/8919/2025-26/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) HASIMARA
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) HASIMARA
₹88,000
Yes
28 Aug 2025
12 Jul 2025
16 Aug 2025
12 Jul 2025
14 Aug 2025
31 Jul 2025
Amount
Bay Line Marking Apply masking tape before application of bay marking of 100mm width. Stir the component A and component B of Nitoflor FC150 or Shali Floor SL TC 2HBE or equivalent in performance in makes specified in PS, separately. Mix hardener gradually into the base under continuous stirring. After mixing, apply Nitoflor FC150 or Shali Floor SL TC 2HBE or equivalent in performance in makes specified in PS, by brush or roller to the required thickness on the dried primer Nitoprime 25 or equivalent in performance in makes specified in PS, is a high build coating and in advisable to apply two coats at right angles to each other. This way the second coat will cover any burnishes of the first coat. Allow first coat to become tack free before the second coat is applied. Generally, second coat is applied after overnight curing the first coat). Remove the masking tape immediately after application of Nitoflor FC150 or Shali Floor SL TC 2HBE or equivalent in performance in makes specified in PS, complete all as specified and directed. (Note for item No 1.00 & 2.00 : The work shall be got carried out from company approved applicator. Contractor shall submit requisite documents and get the applicator approved before commencing the treatment.)
Taking down cement plaster of any description any thickness including racking out joints hacking for keys, scrubbing down with water etc, including disposal of debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.
M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately)
Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.
M&L 15mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 5mm thick in CM (1:3) on fair faces of ceiling surfaces, finished even and smooth (without using extra cement), complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of old painted steel or iron surfaces of any description n. exc. 10cm in width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.
M & L for complete removal of existing treatment of walls surfaces, applying 1.8mm to 2mm thick wall care putty to obtain a smooth surface including making good any undulations on the surfaces including applying two coats of oil bound distemper over putty surfaces, complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls etc and applying two coats of distemper oil emulsion over a coat of alkali resitant primer, complete all as specified and directed.
Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.
Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)
S&F steel water tubing and connection, medium grade, 15mm bore with all fittings fixed to wall or ceiling, complete all as specified and directed.
Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.
S&F steel water tubing and connection, medium grade, 20mm bore with all fittings fixed to wall or ceiling, complete all as specified and directed.
Re-fixing old steel tubing and connection 20mm bore in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)
S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated, fancy type, with capstan head handle, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed.
S&F in repair CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.
S&F in repair 15mm bore, stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repair 15mm bore, stop valve, fancy type, chromium plated, with long shank and cup, concealed type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repair 15mm bore angular stop cock, chromium plated, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repair 20mm bore gun metal, globe or gate valve, ISI marked, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.
S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (minimum weight 210 gms), complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed.
S&F in repair waste coupling of PTMT (half or full threaded) (Minimum weight -45 gms) for 32mm bore discharge pipe, complete all as specified and directed.
S&F in repair waste coupling of PTMT (half or full threaded) (Minimum weight -60 gms) for 40mm bore discharge pipe, complete all as specified and directed.
S&F in repair 140mm size grating round of PTMT (Minimum weight -50 gms), complete all as specified and as directed.
S&F in repair shower rose 125mm size, brass, chromium plated, including fixing to steel pipe or union, complete all as specified and directed.
S & F in repair 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed.
S & F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends, complete all as specified and directed.
S&F in repair 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe, complete all as specified and directed.
S&F in repair internal assembly including valve less syphone for 10 ltrs capacity PVC flushing cistern , complete all as specified and directed.
S&F in repair handle for 10 ltrs capacity PVC flushing cistern, complete all as specified and directed.
S&F in repair inlet ball valve for 10 ltrs capacity PVC flushing cistern, complete all as specified and directed.
S&F in repair float for 10 ltrs capacity PVC flushing cistern, complete all as specified and directed.
S&F in repair of 32mm size PVC waste pipe flexible type (collapsible) for wash hand basin or sink 800mm long, complete all as specified and directed.
S&F in repair of 40mm size PVC waste pipe flexible type (collapsible) for wash hand basin or sink 800mm long, complete all as specified and directed.
S&F in repair vitreous china squatting pan,"Orissa pattern" white, size 580x 440 mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe, complete all as specified and directed.
S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.
S&F vitreous china wash hand basin white flat back of size 550x 400mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc including dismantling the existing basin, complete all as specified and directed.
S&F in repair sinks made of stainless steel with drainage board 1mm thick (SS-304) with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm, complete all as specified and directed.
S&F in repair sinks made of stainless steel without drainage board 1mm thick (SS-304) with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 410mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm, complete all as specified and directed.
S&F stainless steel kitchen plate rack of size 0.75 x 0.78m (minimum) standard quality (SS-204), weight not less than 6 kg, fixed with brass screw, complete all as specified and directed.
S&F in repair towel rail, 60cm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed.
S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, complete all as specified and directed.
M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed.
S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks, complete all as specified and directed.
S&F 1st class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc and removing old beads to store, complete all as specified and directed.
S&F in repair 2nd class hardwood plain fillets, square, ractangular or triangular in section, area exc. 3 Sqcm & n.exc. 6 Sqcm, clean sawn, secured with nails or brads, complete all as specified and directed.
S&F in repair 2nd class hardwood plain fillets, square, ractangular or triangular in section, area exc. 13 Sqcm & n.exc. 25 Sqcm, clean sawn, secured with nails or brads, complete all as specified and directed.
S&F in repair 2nd class hard wood boarding 15mm thick, clean sawn with butt joints fixed with nails in any situaion as shelves of built-in-cupboard etc, including replacement of old decayed boarding in patches including cutting out old, piecing, heading joints, etc, complete all as specified and directed.
S&F in repair for 18mm thick wooden grain PVC celuka ply fixed in shutters built-in cupboards, almirahs, book cases, toilet boxes and similar work fixed with screws/self tapping screws (including stainless steel handle, piano hinges, hasp & staple) etc, complete all as specified and directed.
S&F in repair for 25mm thick wooden grain PVC celuka ply fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work fixed with screws/self tapping screws etc, complete all as specified and directed
S&F in repair 100mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.
S&F in repair 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.
S&F in repair 200mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.
S&F in repair 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
S&F in repair 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
S&F in repair 75mm size MS butt hinge, medium weight, cold rolled, complete all as specified and directed.
S&F in repair 100mm size MS butt hinge, medium weight, cold rolled, complete all as specified and directed.
S & F in repair continuous (piano) hinges,mild steel, width of flap 30mm (when open) bright finish or electrogalvanised, complete all as specified and directed.
S&F in repair mild steel helical door spring, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.
S&F in repair 150mm long extruded aluminium alloy handle, cast type, anodised, complete all as specified and directed.
S&F in repair 100mm long extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed.
S&F in repair mild steel handles for MS windows/vents 75mm long suitable for left/right hand including fixing nut & bolts, complete all as specified and directed .
S&F in repair mild steel casement stays, size 300mm, with hinged joint and two plates, with studs suitable for MS windows and vents, complete all as specified and directed .
S&F in repair 75mm hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.
S&F 100mm hasp & staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.
S&F in repair 25mm dia curtain rod of anodised aluminium alloy with and including stainless steel brackets, stops, rollers etc, complete fixing arrangement, complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed.
M&L for sheet glass, 3mm thick, ordinary quality and glazing with oil putty in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed.
S&F in repair door closer hydraulically regulated, aluminium (die cast) body, designation No 1, universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 Kg, complete all as specified and directed.
Taking down, repair to aluminium doors, windows, of size exc. 1 Sqm but not exc. 2 Sqm etc by replacing its faulty parts i.e. rollers, hinzes, handles, lock to bring its functional conditions and refixing in the same position, complete all as specified and directed. (Note : Glass shall be measured and paid seperately)
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140mm, fixed on floor, complete all as specified and directed.
S & F in repair 2mm thick ruberised door seal, width exc 30mm but n.exc 50mm, fixed with screw, complete all as specified and directed.
Resecuring or easing and adjusting without taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed.h
Resecuring or easing and adjusting without taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each, complete all as specified and directed.
M & L for plastering in patches (n. exc. 1 Sqm) to wall, ceiling and applying surface finishes etc, complete all as specified and directed. Note : Quoted rate shall deemed to be included taking down cement plaster, applying adjacent finishes, removel of debris and cleaning the area.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.
M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290), complete all as specified and directed.
S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe 410W (Gde E-250) complete all as specified and as directed.
S&F steel windows with side hung shutters (ISI marked), factory fabricated including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed.
S&F steel windows with side hung shutters (ISI marked), factory fabricated including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/ painting required, complete all as specified and directed.
S&F steel ventilator with top hung shutter (ISI marked), factory fabricated including hinges, steel peg stay including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed.
S & F 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane, complete all as specified and directed.
M&L for preparing new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and directed.
M&L for preparing of new steel & iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backin), removing serviceable tiles to store and rubbish off the premises, complete as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.
M&L glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm/450 x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.
M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, on floors, over and including 15mm thick screed bed of cement mortar (1:6), complete all as specified and directed.
M&L for granite (of any type) tiles 20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over and including rendering 10mm thick in CM (1:4) as backing coat, complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and paving n. exc. 15cm thickness (below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.
M&L for chequred cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C1 (20mm grade crushed stone aggregate) as in sub base, PCC path and similar works, complete all as specified and directed.
M & L PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) cast in situ in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and directed.
Note: An amount of Rs.20,415.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S BISHAL ENTERPRISES (BID ID -3388664)
M/S RATHIN ENTERPRISES (BID ID -3388887)
M/S. NARENDRA KUMAR GARG (BID ID -3388656)
M/S ROY ENTERPRISE (BID ID -3388900)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .