REPAIR/RE-SURFACING TO INTERNAL ROADS AT BASISTHA AREA UNDER GE GUWAHATI

Amount

Surface dressing not exceeding 15 cm deep in soft/loose soil and removing excavated materials upto 50 m distance complete all as specified and directed.

Scarifying or picking gravelled macadam or bituminous macadam surface in area not exceeding 400sqm and depth exceeding 50mm but not exceeding 100mm complete all as specified and directed.

Materials and labour for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) of granite, trap or basalt, spread, rolled and consolidated to required gradient and camber required with 8 to 10 tonne capacity power roller all as specified and directed.

Preparation of unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or compressed air to remove all loose, dirt, etc. complete all as specified and directed.

M & L for applying evenly a tack coat with bituminous primer @ 10 Kg per 10Sqm (VG-10) on unsurfaced water bound macadam complete all as specified and directed.

M & L for repair to potholes, not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc cutting around edges to at least 25mm in depth and making good by applying tack coat using paving bitumen @ 5 kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder using paving bitumen @ 9.8 Kg per 10 Sqm, blinded with 0.09 Cum of stone chipping 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings),depth of pothholes exceeding 30mm and rolled with 8 to 10 tonne power roller to uniform smooth surfaces complete all as specified and as directed.

Material and labour for providing premix bituminous macadam laid/rolled and compacted to required gradient and camber using 8 to 10 tone capacity power roller (consolidated thickness 75mm or less) using paving bitumen (VG 30 Grade) @ 4% by weight of total mix complete all as specified and directed.

Material and labour for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or compressed air to remove all loose, dirt, etc. and applying evenly a priming/tack coat with bituminous primer (VG-10) @ 5 Kg per 10Sqm complete all as specified and directed.

Material and labour for providing bituminous premixed carpet 40mm consolidated thickness with 0.54 cum of stone chippings mixed with 29.20 Kg of binder (paving bitumen of grade VG-30) per 10 Sqm, rolled and compacted to required camber and gradient etc. complete all as specified and directed.

Material and labour for premixed sand seal coat using paving bitumen @ 6.8 Kg per 10 Sqm, blinded with 0.06 Cum of sand and well rammed (paving bitumen of grade VG-30), rolled with 8 to 10 tonne power roller to uniform smooth surfaces complete all as specified and as directed.

Material and labour for providing bituminous premixed semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content (using paving bitumen VG-30) by weight of total mix rolled and compacted to required camber and gradient using 8 to 12 ton capacity power roller complete all as specified and directed.

Material and labour for continuous brick edging using old size brick burnt clay of sub-class ‘B’ with width equal to the width of the brick, laid dry on end vertically including necessary earth work complete all as specified and directed.

Material and labour for painting lines, dashes, arrows, letters, etc. on roads using thermo plastic road marking paint 2.5mm uniform thickness finished with glass beads (MORTH Grade) white or yellow colour, with the help of road marking machine including cleaning the surface throughly and removing all dirts dust complete all as specified and directed.

Supply and fix in repairs solar road stud/cat eye of minimum size 135mm x105mm x 25mm made from aluminium alloy and solar powered by mono-crystalline solar panel 2.4 V/0.3 Watt with one high capacity Ni-Cd rechargeable battery(1.2V/1600MA) and provided with superbright LEDs of 10000 to 18000 mcd(Millicandela), 3 pieces each side and total 6 pieces for high brightness with charging time of 5-6 hours and backup of 3 to 4 days of continuous light all as specified and directed by Engr-in-Charge. MAKE : 3M/AVERY DENNISON/VARGO/DARK EYE.

Supply and fix in repair Glow studs of minimum size 115x70 and 16 mm thick made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D 4280. The slope of retro-reflective surface shall be 35 (+/-5) degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I : 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-Charge. MAKE : 3M/AVERY DENNISON/VARGO/DARK EYE.

Supply and fixing in repair speed bump made out of ABS material with two high reflective reflectors moulded in PMMA material welded with ABS base plate through ultrasonic welding process and fixed on to the speed bump size of speed bump is 495mm x 420mm x 70mm complete all as specified and as directed.

M/s Dhani Enterprise

M/s Amtung Enterprises

Bidder Name

M/s Amtung Enterprises