Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.3 LAccepted-AOC DOOR NO 6 106 GORKHA CAMP WELLINGTON BARRACKS POST THE NILGIRIS 643231 | THE NILGIRIS | TAMIL NADU | 643231 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹15.8 L+₹35,815.40 (2.33%)Rejected-Finance 20 1 CHANDRA NIVAS APPLEBY ROAD WELLINGTON COONOOR NILGIRIS 643 232 | COONOOR | NILGIRIS | TAMIL NADU | 643232 | L2 | Rejected-Finance Being Not L1 Bidder | |
| 3 | L3₹17.2 L+₹1.8 L (11.7%)Rejected-Finance CHENNAI | L3 | Rejected-Finance Being Not L1 Bidder |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
8 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DSSC
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
UPGRADATION OF VARUNA CONF HALL IN JAWAHAR BLOCK AT DSSC WELLINGTON
2022_MES_550965_1
8265/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENTS AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹28,000
Yes
14 Oct 2022
9 Sept 2022
10 Oct 2022
9 Sept 2022
8 Oct 2022
23 Sept 2022
60 days
Amount
B/R PORTION Dismantling wooden boarding of any size & thickness fixed on wall on wooden battens with screws and removing from site complete all as specified and as directed.
Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing unserviceable debris off the premises all as specified and as directed.
M & L for RCC (1:2:4) (Nominal Mix) type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.
M & L for use and waste of timber as in form work to sides and soffits of roof beam, beam haunchings, girders, bressummers, lintels , cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc., for fair finished surfaces of concrete flat all as specified and as directed.
M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.
Description all as per Item No 5 above but 5 mm and over upto and including10 mm dia as in stirrups complete all as specified and as directed.
M & L for plain fillets second class hardwwod, sectional area exc 6 Sqcm but n.exc 13 Sqcm., square, rectangular or triangular in section, clean sawn, secured with nails plugging to wall complete all as specified and as directed.
M & L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote complete all as specified and as directed.
M & L for 8mm thick Pre-Engineered laminated wood wall panelling planks fixed with screw to timber frame work over and including 8/9mm thick plywood fixed to wall complete all as per manufacturer's instructions and as directed by Engr-in-Charge.
Fixing only 8mm thick Pre-Engineered laminated wood wall panelling planks fixed with screw to timber frame work over and including 8/9mm thick plywood fixed on wall or floor complete all as per manufacturer's instructions and as directed by Engr-in-Charge.
M & L for pre-engineered laminated wood for Cornices/beading/nosing/ moulding as in pre-engineered wall panelling etc of cross sectional area n.exc 25 Sqcm complete all as specified and as directed.
M & L for UPVC windows, white colour provided all as per manufacturer's direction and following specifications all as directed :- (i) The profile for construction of UPVC window frame shall be made of UPVC material confirming to IS 10151. (ii) The frame shall be made of extruded UPVC section having overall dimension of 65 x 50 mm having wall thickness 2 mm ± 0.2 mm (iii) Corners of wall frame shall be joined by MS galvanized brackets, joints mitred and plastic welded . (iv) The hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (v) The profiles should be single chamber system which shall provide high insulation properties. (vi) The window system should be glazed with 6 mm thick plane glass fixed in window frame as per manufacturer's instruction. Note: The entire fixing shall be done as per manufacturer's instructions and specification and as directed by Engr-in-Charge. Make : Madhu indrusties/AMD overseas Ltd/Gadli industries/ Simta Astrix
S & F in repairs Push up heavy duty chair (SR 07, Slider, push back (22'') HSN/SAC Code 9403) fixed to floor with suitable adhesive and expansion bolt etc., (anchor fasteners shall be not less than 10 mm dia and length 120 mm.) complete all as specified and as directed. Make : SR Seating Pvt Ltd or techno-commercially equivalent in Godrej/ Spark International or equivalent as approved by GE.
Chairs description : Push back mechanism chair Arm rest to arm rest (ctc) 559mm (22") ABS molded housing for back covers. All sheet metal parts with powder coated. Arm rest in PPCP with cup holders. Seat numbering on inner both the side of the chair stands with silicon stickers. Row number for seat alont the aisles. Provision for lights on sides along with aisles with the row and the seat numbers display. Fabric: Coloour approved by GE. 100% polyster with 4mm lamination. Frames : Thick high pressure & induction heated plywood for seat manufactured with hardwood veneers. 12mm thick high pressure & induction heated plywood for back manufactured with harrdwood veneers.
Polyurethane foams: Thickness : (a) Seat cushion tapered type front portion with a hump front - 115mm (+/- 5mm) Back - 90mm (+/-5mm) (b) Back cushion bucket type Headrest - 110 mm (+/-5 mm) Centre- 75 mm (+/-5 mm) Bottom - 110 mm (+/-5 mm) Sides contours - 70 mm (+/-5 mm) Size : a) Seat cushion : 510 mm (+/- 5 mm) x 500 mm (+/-5mm) b) Backcushion : 740 mm (+/- 5 mm) x 500 mm (+/-5mm) Density: Density of cushions - 50 to 55 Kg/m3 Springs : For sliding mechansim torsion spring/spring steel IS :44541981 grade III
Sheet- metal components: HRCQ/CRCA sheet metal IS : 2062-2011 & IS 4923 -1997 side stands Side stand 3mm (+/-0.2mm) thick size : 415mm (+/-5mm) x 345mm (+/-5mm) both side bottom profiledesign cut. 75mm x 52mm 14 g (+/0.2mm) 190 mm length tubular pipe for the leg wielded to the 3mm plate. Flat for base of the stands 280mm (+/- 2mm) length 50mm (+/-2mm) x 5mm (+/0.2mm) Push back frames : Frames are constructed by 40mm x 20mm CRCA pipe supported by Langles of 2mm thcikness of HRCA sheets and this mounted with injection molded palstic wheels of 2nos of dia 45mm and thickness of 45mm made of engineering plasitc (POM) materials. Push back mechanism: Slider U box formed out of 2 mm HRCA sheets of size 136mm x 306 mm free moment of seat with engineering plasitc rollers and proper injection molded PVC noise damping stoppers are provided at both end of slider U box. Impact area of PVC noise damping stoppers are provided at both end of slider U box. Impact area of PVC noise damping stoppers at back which sis suported by allen bolt of 6mm x 75mm the liing of bright metal 280mm x 25mm x 5mm. Connected to push bcak mechanism box of 180mm (+/-2mm) x 70 (+/-2mm) mm & height of the box 15mm (+/- 2mm), ear "L" bracket attached to the box 190mm(+/-2mm) x 135 mm (+/- 2mm) with two slot holes for fixing the back. Seat and back cushion housing : ABS molded vacuum forming out of 2mm sheet. Installation of the chairs: The chairs to be installed to the flooring with ready to fix condtion with the chemical anchoring M 10 x 100mm.
M & L for applyinng one coat of Touch wood polish on old wooden surfaces including necessary preparation of surfaces including filling of holes / dents with filler material and applying one coat of filled area with touch wood polish complete all as specified and as directed.
M & L for applying two coats of Touch wood polish on old wooden surfaces including necessary preparation of surfaces including filling of holes / dents with filler material and applying one coat of filled area with touch wood polish complete all as specified and as directed.
M & L for precast cement concrete block masonry (1:3:6) type C-1 with solid block, exc 10 cm in width and setting in CM (1: 6) complete all as specified and as directed.
M & L for rendering 15mm thick in CM (1:6) on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M & L for preparation of old celing/Gypsum ceiling surfaces and applying one coat of emulsion paint of Make : Asian PaInts Royale Shyne or equivalent in Berger Paints/ Dulux Paints/ Shalimar Paints complete all as per manufacturer's instruction and as directed.
E/M PORTION S & F IP>=20, Class I, Wall mounted 2 feet LED lighting fixture with integrated electronic driver & polycarbonate difuser complete with all accessories, prewired, 10 W with min 900 lumens, 6500 K, PF>=0.90, CRI>=80 and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit complete all as specified and as directed. Make: Luker, Cat No:LT510P or techno-commercially equivalent in Havells/Philips
S & F IP>=20, Class I, Wall mounted 4 feet LED lighting fixture with integrated electronic driver & polycarbonate difuser complete with all accessories, prewired, 24 W with min 1800 lumens, 6500 K, PF>=0.90, CRI>=80 and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit complete all as specified and as directed. Make: Luker, Cat No: LT5M24 or techno-commercially equivalent in Havells/Philips
S & F ultra modern, Surface mounted, Square Shape, 30W, 6500K LED surface panel complete with electronic driver & high brightness LED complete all as specified and as directed. Make: Luker, Cat No: LNPSRS30 or techno-commercially equivalent in Havells/Philips
S & F ultra modern, Surface mounted,Circular Shape, 18W, 6500K LED surface panel complete with electronic driver & high brightness LED complete all as specified and as directed. Make: Luker, Cat No: LNPSRR18 or techno-commercially equivalent in Havells/ Jaquar/Philips
S & F environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W or min 800 lumens with IP 66 with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size in flexible conduit complete all as specified and as directed. Make:Havells, Cat No : HEXAFT10WLED857S SYMBOPC or techno-commercially equivalent in Philips/Wipro
S & F ceiling /wall /panel mounted LED TRACKLIGHT (WHITE COLOUR) 12 W or next higher rating suitable for Track Channel 1/2 Mtrs span, CRI > 80, CT=6500 K ,twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit complete all as specified and as directed. Make: Luker, Cat No : LSPT12 or techno-commercially equivalent in Philips/Havells Note: Track channel of1/2 Mtrs shall be measured & paid separately under relevant items.
S & F ceiling /wall /panel mounted LED TRACK CHANNEL (WHITE COLOUR) 1 Mtrs length suitable for mounting of 03 Nos Tracklights 12 W, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LTM1 or techno-commercially equivalent in Philips/Havells. Note: Track Lights 12 W shall be measured & paid separately under relevant items.
S & F ultra modern, Surface mounting, 42W, 6500K LED luminaire of size 2' x 2' suitable for ceiling complete with electronic driver & high brightness LED complete all as specified and as directed. Make: Havells, Cat No: PLUTOSURFACE2X2 PLS42WLED857S or techno-commercially equivalent in Philips/Wipro
S & F ultra modern, Recess mounting, 40W, 6500K LED luminaire of size 2' x 2' suitable for ceiling complete with electronic driver & high brightness LED complete all as specified and as directed. Make: Luker, Cat No: LPS40 or techno-commercially equivalent in Philips/Havells
S & F ultra modern, Recess mounting, 15W, 6500K LED luminaire suitable for ceiling complete with electronic driver & high brightness LED complete all as specified and as directed. Make: Luker, Cat No: LNPR15 or techno-commercially equivalent in Philips/Havells. Note:-The cost of fixing New Gypsum sheet in place of existing fitting and cutting the gypsum board for fixing the fitting is deemed to be included in quoted rates.
S & F in repairs rigid non-metallic PVC conduits of external dia 20 mm exclusive of boxes (junction /terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends with aluminium clamp, bolt, nuts or including fixing with PVC cable ties of suitable size/ type etc as applicable on ground/ site for fixing complete all as specified and as directed. Make:Precision /Finolex /Polycab / Modi/ Pressfit
S & F Aluminium Extruded Destello Generation Suspended light Fitting of 36W of Size 1137 x 57 x 85 mm , including necessary end cap, jointing Kit, mains Cable for connection at a height of 7 to 9 mtr from floor level complete all as specified and as directed: Make :Havells, Cat No (For Fitting): DESTG250 LP/S36WLED857SWH1130, Cat No ( For Endcap): DESTG250LP/SENDCAPWHX2, Cat No (For Jointing Kit):JKITDESTG250P/S, Cat No (For Mains Cable) : 3COREMAINSCABLE 1.5MTRWH for mains Cable or techno-commercially equivalent in Philips/Wipro.
S & F in replacement PVC insulated flexible multicore round copper conductor cable of size 3 core 2.5 Sqmm including necessary end connector complete all as specified and directed. Make:Havells, Cat No: WHMFDSKB32X5 or techno-commercially equivalent in Finolex/Polycab. Note for Item Nos:- 19 to 31:- The cost of making good the disturbed surfaces (if any) is deemed to be included in the unit quoted rates.
S & F loop in- loop out fuse junction box of internal dimension 140 x 140 x 95mm made out of FRP sheet and locking screw fitted with and incl 10 Amps MCB - 1 No, 20 Amps rated 4 way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular/rail poles including necessary aluminium clamps, suitable glands, lugs and GI nut and bolts complete all as specified and directed. Make : Sintex, Cat No : GSJB-1414 or techno-commercially equivalent in Hensel/OBO & Make of MCB SP:L&T,Cat No : BB10060C or techno-commercially equivalent in Legrand/ABB
Taking down old fitting of any type /size /rating and keeping in safe custody for handover to MES E/M Store or for taking schedule of credit including matching good the disturbed surfaces (if any) complete all as specified and directed by the Engr--in Charge. Note : Cost of transportation of the dismantled serviceable fittings to MES E/M storeyard is deemed to be included in the unit quoted rates.
P K ENTERPRISES
VVM CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .