82471 PROVISION OF PARKING SHED FOR OFFICE SPACES, SHIPS OFFICE AND STAFF RECORD STORAGE, PROVISION OF SEPTIC TANK AND SOAKAGE WELL FOR 150 USERS AND PROVISION OF SENIOR SAILORS MESS ROOM AT MEENAMBAKKAM UNDER AGE (I) NAVY CHENNAI

Amount

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5m depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm in soft/loose soil, complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at level not exceeding 1.50 metre above the starting point complete all as specified and as directed.

Earth filling under floor with available soil including spreading, levelling and well ramming including watering as required not exceeding 25cm thick. (Note:-Earth obtained from item no-1 is reused)

Material and labour for providing plain cement concrete 1:4:8, type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and as directed.

Supply and fix mild steel TMT bars 10mm dia and over cut to length and bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed

Supply and fix mild steel TMT bars 6mm to 8mm dia and over cut to length and bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed

Use & Waste of Formwork (Square, rectangular or polygonal) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Use & waste of formwork (square, rectangular or polygonal) to sides of pillars, posts, struts, piers, columns and stanchions for finished surface, complete all as specified and as directed

Material and labour RCC 1:1.5:3 (type B1) using 20mm graded aggregate in foundation, including rafts, footings, foundation beams; plinth beams; basement slabs, under rammed piles and mass concrete complete all as specified and as directed

Material and labour for RCC (type B0) 1:1.5:3 using 12.5mm grade aggregate as in columns pillars piers posts and struts complete all as specified and directed by the Engineer-in-Charge

Use and waste formwork to chulah hoods, shelves Chajjas, troughs, shelf and similar work etc., including edges, rough finished surface of concrete all as specified and directed by the Engineer-in-Charge

Material and labour RCC 1:1.5:3 (type B1) using 20mm graded aggregate in slabs supported on walls, beams etc. complete all as specified and as directed

Use & waste wooden form work (rough finished) to soffits of suspended slabs such as roof slab, floor slabs, landing and similar work; not exceeding 200mm thick (horizontal/sloping) complete all as specified and as directed

Material and labour RCC 1:1.5:3 (type B1) using 20mm graded aggregate as in shaves, chajjas etc. complete all as specified and as directed

Material and labour for brick work with fly ash brick straight or curved on plan exceeding 6m means radius old size built in cement mortar 1:6 complete all as specified and as directed

Material and labour for fly ash brick straight or curved on plan to any radius in half brick wall in cement mortar 1:4 complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster in two layer each of 10mm and 5mm thick on fair faces of brick wall in CM (1:4) & water proofing compound mixed with second layer @3% finished fair and even.(Note:- WPC shall be measured and paid separately)

Material and labour for rendering 10mm thick cement plaster on other than fair face of brick wall in CM(1:6) complete all as specified and directed

Supply only integral water proofing compound complete all as specified and as directed.

Material and Labour for 75mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base finished even and rough complete all as specified and as directed

Material and Labour for 40mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in bedding finished even and rough complete all as specified and as directed

Material and labour for 350mm x 450mm x 7mm thick coloured glazed ceramic tiles on vertical surfaces such as skirting, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

Material and labour for coloured joint free non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm and not exceeding 0.38 Sqm/(400x400mm) in floors, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including screed bed 15 mm thick in cement mortar (1:6) etc. complete all as specified and as directed.

Material and labour for fixing Granite (of any type) , 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a including a screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

Material and labour for vitrified ceramic tiles 8 to10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc... in flooring including skirtings, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including screed bed 15mm thick in cement mortar (1:6) etc... complete all as specified and as directed.

Material and labour for 75mm thick hardcore of boulders, gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to true surface all as specified and as directed

Material and Labour 75mm thick PCC(1:3:6) type C2 using 40mm graded stone aggregates as in plinth protection and finished the surface even & smooth without using extra cement all as specified and as directed

Supply and fix anodised aluminium powder coated any colour as approved for ventilator frame and shutter half fixed and half louvered type without sash bar, including 4mm thick glass, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc and section weighing 0.55kg/Rm complete all as specified and as directed

Supply and fix anodised aluminium powder coated any color as approved window shutters, including window frame with three track sliding type, without sash bars including guide rollers as required nos, including 4mm thick glass necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting as required like suitable handle star lock etc., and section weighing 0.55kg/Rm complete all as specified and directed (Note; Rate including for providing slide or fix type mosquito proofing shutter and additional track if required)

Supply and fix kitchen sink with drainage board of over all size 915mm X 460mm and bowl size 410mm X 330mm X 160mm, 1mm thick with plug washers and wastes; including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed

Material and Labour 15mm bore Unplasticised PVC pipes of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type, with all fittings, fixed complete to wall or laid in floors , complete all as specified and as directed

Material and Labour 20mm bore Unplasticised PVC pipes of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type, with all fittings, fixed complete to wall or laid in floors , complete all as specified and as directed

Supply and fixed fancy type bib taps chromium plated, cast copper alloy, crutch or butterfly handle, screwed down for 15mm bore pipe complete all as specified and as directed

Preparation new undecorated plastered surface of walls finishing walls with premium acrylic smooth exterior paint with silicone additive of required shade: New work (two or more coats applied @1.43Ltr/10sqm over and including priming coat of exterior primer applied @2.20kg/10sqm). complete all as specified and as directed

Material and labour preparation of new undecorated plastered surface of walls and applying two coats of colour distemper oil emulsion over coat of primer complete all as specified and as directed

Surface dressing not exceeding 15cm deep as in soft/loose soil all as sepcified and directed

Material and labour for plain cement concrete type B-2 PCC (1:2:4) (40mm graded aggregate) for base in floor in 100mm thick, complete all as specified and as directed

Material and labour for plain cement concrete type D-2 PCC (1:4:8) (40mm graded aggregate) for base in floor in 100mm thick, complete all as specified and as directed

Material and labour for finishing cement concrete surface even and smooth without extra cement, complete all as specified and as directed

Material and labour for forming construction joints 10mm wide 30mm deep filled with sealing compound grade 'A', complete all as specified and as directed

Material and labour for forming contraction (dummy) joints 10mm wide 75mm deep filled with sealing compound grade A,complete all as specified and as directed

Supply and installation of steel structure to accommodate tensile membrane fabric as per the drawing using steel sections of 219mm Dia column, 90mm Dia in secondary purlin and main arch, 96x46mm Dia connecting purlin to be fabricated as per the design approved and diagram attached and Erected at site by making necessary formation of scaffolding and proper base with footing to hold the column as directed by Engineer-in-Charge. The structure to be painted with Epoxy paint with one coat of primer and two coats of finish paint as specified and directed by Engineer-in-charge. NOTE: (i) Necessary Excavation/Removal and PCC foundation of 0.90mX0.90mX0.90m for the structure as directed by Enginer-in-Charge is deemed to be included the quoted rate. (ii) Sketch enclosed

Design supply, Fabricate and install Tensile membrane fabric of 700 GSM, serge ferarri 902 S2 make. Fabric to be patterned and welded using high frequency welding machine to achieve the design as approved. Fabric to be installed with necessary aluminium/GI Accessories with self tapping screws to be fixed on the structure with necessary tout , complete all as specified and as directed

Material and labour preparation of new undecorated plastered surface of walls and applying two coats of colour distemper oil emulsion over coat of primer and one coat of putty on wall complete all as specified and as directed

Supply and fixing powder coated anodised aluminium shutter for doors, aluminium section weighing 0.55kg/sqm including necessary joining cleats glazing clips rubber neoprene packing handle 2 nos in each door hinges anodized snap beading screws etc complete all as specified incl frame with prelaminated board of 6mm thick at bottom, without sash bars including guide rollers as required nos, including 4mm thick glass necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fittings as required like suitable handle, star lock etc and section weighing 0.55kg/Rm complete all as specified and directed (Note;-rate incl for providing slide or fix type mosquito proofing shutter and additional track if required)

Supply and fix 19mm dia anodised aluminium alloy curtain rod powder coated with fixing side brackets, end cups, rings @10Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and as directed

Supply and fix Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed

Material and labour for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron door/ ladders, framed balusters, walkways railing, frame work for water tanks and similar steel work, steel confirming to Fe-290, Grade E-165, complete all as specified and directed

Material and labour for treating the bottom and sides of excavation at the rate of 5litres of emulsion per square metre of surface area complete all as specified and directed

Supply and fix for treating the backfill in contact with foundation at the rate of 7.5litres of emulsion per Sqm of vertical surface (area of the sub structure in contact with backfill to be measured) complete all as specified and directed

Material and labour for treating the top surface of filled earth at the rate of 5 litres of emulsion per sqm of surface complete all as specified and directed

Material and labour for treating the soil under plinth protection at the rate of 5litres of emulsion per Sqm of surface area complete all as specified and directed

Material and labour for treating the soil along with external perimeter of building at the rate of 2.25litre of emulsion per metre of the perimeter wall, complete all as specified and as directed

Supply and laying the APP polymeric water proofing membrane of 3.5 kg/sqm of black finished reinforced with non-woven polyester matt. with a thermo fusible finish laid over 1.2 kg/sqm bitumen grade 85/25 over compatible bitumen primer at the rate of 0.25 ltrs/Sqm torching overlaps with a propane or a butane gas torch with a overlap of 75 mm at the sides and 100 mm at the ends and sealing applying a coat of cold emulsion bituminous primer all as per manufacturers instructions, including applying one coat of aluminium pant @ 0.11 kg/sqm, complete all as specified and as directed.

Material and labour for concrete bed to drain pipes including packing under & completely surrounding pipes with concrete after they are laid & tested in cement concrete 1:3:6 type C2 bore of pipe 110/150mm complete all as specified and directed

Use and waste formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, openings in concrete walls, floors and roofs not exceeding 20cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide, rough finished surface of concrete complete all as specified and as directed

Supply and fix 110 mm dia bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

Material and labour for hardcore of broken stone gauge exceeding 63mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to true surface all as specified and as directed

Material and Labour 75mm thick PCC(1:3:6) type C2 using 40mm graded stone aggregates as in paving and finished the surface even & smooth without using extra cement all as specified and as directed

Supply and fixing Fiber reinforced plastic (FRP) based Bio Septic tank capacity of 40000Ltr (40KL) Horizontal cylindrical type suitable for under ground application. Scope of Supply:- Supply and installation of FBST 40-01 Model having a dimension 35.5 ft length X 7.7ft dia X 9.2ft height with necessary pipe nozzles, disc type partition wall and Rib provision. The tank will supply along with 4Nos of anchor and Nylon belt to neutralize the buoyancy force. Process Description:- Bio Septic tank consists of two chamber and the chambers are divided by disc type FRP partition wall. The first chamber works as a septic tank where settleable solids are settle down and further degraded aerobically at the bottom zone. the second chamber consists of up flow anaerobic filter, where further removal of reorganic matter takes place by bio pack media with high surface area. Bio media provides additional surface for the growth of organism that purify the sewage further, including clearing surface with JCB and making proper placement of the tank. Exisiting tank to be removed and taken away from the site at least for a distance of 4km as specified and directed by Engineer-in-Charge.

Construction of soakage well consisting of excavation, in any type soil, foundation in PCC (1:3:6) walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M/25 SFRC Cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size of 30MtrX4.50Mtr effective depth complete all as specified and as directed.(Refer CE Chennai Zone Drg No: TD/ST/748 Sheet No. 1/1)

Material and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 19/20mm dia (ISI marked) and accessories, concealed in wall / surface on ceiling excluding terminal boxes made out of 2mm mild steel sheet, of suitable module including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded cable 1100 V with copper conductor as earth continuity conductor and connecting to common earth dolly fixed to wall/ceiling/roof excluding modular metal box and white cover plate with frames, switches, sockets, regulators etc.. suitable for modular type fittings/ fixtures complete all as specified and as directed for the following:-

One light point controlled by one switch

One fan/Exhaust fan point controlled by one regulator/ switch

One 3 pin socket outlet 5 amps socket on same board

One 3 pin socket outlet 5 amps socket on independent board

All as per item No.63 here-in-before but with 2.5sqmm cable for one 3pin socket outlet 15amps on independent board with 2.5sqmm cable as earthing conductor, complete all specified and as directed

Supply and fix for Modular Switch 1 Way , 6 A, 1 Module complete all as specified and directed.

Supply and fix in repair for Modular Switch 1Way , 16 A, 1 Module complete all as specified and directed.

Supply and fix for Modular socket,6A, 2/3 pin combined, 2 Module complete all as specified and directed.

Supply and fix in repair for Modular socket,6A,/16A, 2/3 pin combined, 2 Module complete all as specified and directed.

Supply and fix for Modular white cover plate with frame, 3 Module complete all as specified and directed.

Supply and fix for Modular white cover plate with frame, 6 Module complete all as specified and directed.

Supply and fix for Modular white cover plate with frame, 12 Module complete all as specified and directed.

Supply and fix Modular Metal flush box, 3 module complete all as specified and as directed.

Supply and fix Modular Metal flush box, 6 module complete all as specified and as directed.

Supply and fix Modular Metal flush box, 12 module complete all as specified and as directed.

Material and labour for ceiling rose, 3phase fire rated polycarbonate, isolated body. Complete all as specified and as directed

Supply and fix stepped type electronic fan regulator modular type all as specified and as directed by Engineer-in-charge

Sub main wiring concealed type with two runs of single core 6 sqmm PVC insulated, unsheathed multistranded copper conductor 1100 volts FRLS cable, with one run of 6 sqmm single core PVC insulated unsheathed multistranded copper conductor 1100 volts FRLS cable as earth continuity conductor drawn through and including one run of non metallic PVC conduit not less than 25mm dia including conduit accessories etc complete all as specified and as directed. Note : (i) Two runs of main cable , one run of earth continuity conductor cable and one run of PVC conduit will be measured as one unit for payment purpose.

Supply and fix sheet metal enclosure, powder coated double door for distribution Board , SPN 8 way DB with Degree of Protection IP 54, Detachable Gland Plate, Box Insertion Marks * Circuit Identification Label * Neutral Link, Earth Link, Tin Plated Copper Bus Bar including taking down old existing unserviceable, complete all as specified and directed.

Supply and fix MCB SPN 40-63 Amps, B curve including, disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix MCB SP 06A to 32A, B curve including, disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix 2x2 LED fitting 36Watt, 3600 Lm, 6500K suitable for LED recessed full lit luminaries with glare free uniform illumination with longer life and less maintenance complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and directed.Make:Crompton LCTLRNE-36-FO-CDL, Philips,Wipro

Supply and fix ceiling fan sweep 1200mm complete with all accessories internally pre-wired and including connecting up with twin twisted flexible copper conductor cable with suitable size.

Material and Labour for New earthing complete with galvanised steel plate earth electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25meter below round level) with top edge of the plate not less than 1.5metre below normal ground level connected to GI wire 4mm at two points by means of bolts and nut, check nut and washers including charcoal, dust, common salt, necessary excavation in hard/dense soil. returning filling in and removal of surplus soil to a distance upto 5metre,PCC pit in 1:3:6 type C1(using 20mm grade stone aggregate) RCC 1:2:4 type B1 (using 20mm grade stone aggregate) 50mm thick pit cover, reinforced with 8mm dia TMT bars 75mm c/c, both Gig (light grade) and earth lead protection pipe 20mm bore (light grade) all as specified, directed and shown in electrical plate No.3 of SSR part-I including testing Complete. Note: GI strip and protection pipes 20mm GI light grade upto 7.5 metre is included in unit rate and beyond that the same will be measured separately.

Supply and fix for GI wire 4mm on wall/batten or recessed or buried in ground all as specified and as directed

Cutting the road / hard standing for laying of pipes / cable in trenches and making good with PCC 1 :2 :4 Type B1 complete and painting with black paint, If necessary, to match with the existing bituminous road colour complete all as specified and directed by the Engineer-in-Charge

Material and labour for providing plain cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5m deep in hard/dense soil for laying underground cables, laying pipes etc. complete all as specified and as directed.

Returning, filling, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm in hard/dense soil, complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5m above the starting point all as specified and directed.

Supply and fix High density polyethylene pipe ( HDPE) of pressure rating 6kgf/ cm2 and 40mm dia laid in trenches walls, floors or ceiling, complete all as specified and as directed by Engineer-in-Charge

Supply and fix LED bollard light with robust design and efficient light distribution, IP 65 rated, Make: Crompton LBLSR-10-WW or equivalent as mentioned in PS

Supply and lay in trenches, fixed to wall / pole/ tray etc UG cable XLPE insulated armoured heavy duty electric UG cable with aluminium conductor 1100 volts grade of cross sectional area of 10Sqmm 2core complete all as specified and as directed. Note: Excavation and earth work, sand filling and cable protection shall be measured and paid separately.

Supply and fix weather proof looping in box PVC without side dimension 160x160x105mm comprising of connector and MCB SP 6-32A including mounting arrangements and lugs etc. complete all as specified and as directed. Make:Sintex/Hensel

Supply and fix PVC insulated two single core 2.5 sqmm FRLS copper conductor and one run of 2.5 sqmm multistranded copper conductor as earth continuity conductor drawn through and including 25mm dia non metallic rigid PVC conduit and accessories complete all as specified and as directed. Note : (i)Two run 2.5Sqmm of single core, one run of 2.5 sqmm earth conductor and PVC conduit will be measured as one RM.

Sub main wiring concealed type with two runs of single core 4 sqmm PVC insulated, unsheathed multistranded copper conductor 1100 volts FRLS cable, with one run of 4 sqmm single core PVC insulated unsheathed multistranded copper conductor 1100 volts FRLS cable as earth continuity conductor drawn through and including one run of non metallic PVC conduit not less than 25mm dia including conduit accessories etc complete all as specified and as directed. Note : (i) Two runs of main cable , one run of earth continuity conductor cable and one run of PVC conduit will be measured as one unit for payment purpose.

Supply and fix MCB SP 06A to 40A, B curve including, disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix in 4 feet LED fitting 100 lm/w , 6500 K suitable for Surface, wall & conduit mounting complete with all accessories intemally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. (Make : CGLDL-20-CDL,Philips,Wipro)

Supply and fix exhaust fan 250 mm sweep 5 Blade (White), PVC body, heavy duty, single phase, Rust proof body and blades, double ball bearing with noiseless operation, 1400 RPM complete with louvers including making suitable opening at suitable height, and provision of nuts and bolts on the wall for fixing the exhaust fan complete all as specified and as directed.

lakshmibuilders

VIJAYALAKSHMI ENTERPRISES

kvs constructions