SPECIAL REPAIR TO BUILDING NO. P-64 (JCOs CLUB AND SINGLE JCOs LIVING ACCN AT AOP AREA OF 665 ARMY SQN (R AND O) NRC.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6.

M&L for Non Skid ceramic tilescoloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for rendering 10mm thick in CM 1:4 as in backing coat for tiles fixing

M&L for coloured glazed ceramic digital wall tiles 300x450mmx7to8mmthick etc set and jointed in neat cement slurry & pointed in white or coloured cement to match .

M&L for vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not eexceeding 0.36 sqm but not exceeding 0.42 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade/double charged.

All as per item No 6 above but on vertical surfaces .

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Kota stone slab 20-25mm thick in riser of steps, kirting, dado and pillar laid over cement screed and jointed with ditto as per item 8.00

Demolition of stone slabs and tiles of any description or thickness in floor aprons etc laid bedded & pointed in any mortar all as specified and directed.

M&L for 18 to 20mm thick Granite work (table rubbed and polished ) in steps, jambs pillars,window cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtu re of pigment to match with shade of granite 18to 20mm thick, all as specified and directed.

M&L for glazed cermice tiles in verical surface 350x250x7mm thick /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match joint free tiles.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 200mm

M & L in repairs Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed of 40 mm

Demolition of Brick work or stone/boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement on walls compete all as specifed and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement on walls complete all as specified and as directed.

M&L for 3mm wall putty on wall or ceilling

M&L for preperation of new plastered surface of walls and ceiling and applying two coats of oil bound distemper white or tinted on walls incl primer coat as prepratory to distemper .

M&L for Complete removal of existing treatment on walls by washing, rubbing down,stopping and applying two coats of oil bound distemper white or tinted on walls incl primer coat as prepratory to distemper .

All as per item No 22 Above but on ceilling

M&L for preparation of new surfaces of walls and applying two coat of exterior emulsion paint (apex/weathercoat) on walls over one coat of whether coat primer and ceiling plastered or unplastered surfaces .

M&L for Preparation of old wood and wood based surfaces of any description not other wise deserbed over 10 width or girthand applying two coat of synthetic enamel paint.

M&L for preparation of old steel or iron surfaces of any desciption over 10cm width or girth and two coats of synthetic enamel paint

Taking down chowkats or frames not exc 1.5 sqm each (without taking of shutters from the frames).

Taking down chowkats or frames with shutter exc 1.50 Sqm but not exc 4.00 Sqm each (without taking off shutter from frame)

Taking down shutter of any description exc 1 sqm but n exc 2 sqm from chowkhat and removing to or from store as required complete all as specified.

Taking down shutters of any description n.exc 1 sqm from chowkhat and removing to or from store as required complete all as specified.

S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F 100 mm Butt hinges,stainless steel , bright polished

S&F aluminium alloy barrel tower bolt 150mm long

S&F 125mm aluminium alloy handels

M&L for aluminium (minimum 50 micron powder coated) frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

M&L for aluminium (minimum 50 micron powder coated) door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminium snap beading screw etc. complete all as specified.

M&L for aluminium (minimum 50 micron powder coated) window and ventilator shutters, side hung / sliding type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fitting such as peg stays / tower bolt 150 mm long (1 No) hinges type B- 21, 100mm long (2 Nos), suitable handle (1No), rollers . grip etc. complete all as spicifed.

M&L for 3mm thick sheet glass plain or tinted ordiner quality, fixed in aluminium doors and windws.

M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple or fixed in alumium frames.

S&F Door closer hydraulically regulated,cast iron body designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width & of weight between 61 to 80 Kg

S & F Factory made second class hard wood 35mm thick gauzed and skeleton door shutters, open rebated and prepared and prepared to recive gauge (without sash bars) edges of framing pllain chamfered divided into squadres with plain chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads frsecuring glass/wire cloth any number all as specified.

S&F factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels ) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered particle board with commercial face veneers fixed to chowkat. The size of rail and stile as per IS: 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F aluminium alloy sliding door bolts with hasp staple bolt type 250mm long with bright bolt 12mm dia with & including minimum of 6 Nos bolts and nuts four on bolt plate and two on staple plate.

M&L for two coats of synthetic enamel paint over one coat of pink primer on wood or wood based materials includings preparation of new surfaces.

Dismantling of steel window/ventilators any description and any size complete all as specified and directed.

M&L for steel window in Ahmadabad section with double shutters, side hung including box type hinges with steel handles steel peg stay and complete with glazing bars (one side glazed shutter and other side fly proof shutter with and including 15x3mm flat iron fillet adround and centre for fly proof shutter) and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in Charge. Note:- glazing and wire gauging shall be measured and paid separately.

Dismantling wrought iron or mild any description such as steel gate, steel frame works, purlins, rafter, railings, balusters and window guard bars and directed by Engr-in-Charge.

S&F Framed work as in grill, doors or gates of angle or other section with gusset plates, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe Grade 290(Gde E-165) complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new or previously untreated steel or iron surfaces of any desciption over 10cm width or girth and two coats of synthetic enamel paint over a coat of redoxide primer.

M& L for Demolition of cement concrete in any description and in any position not otherwise specifically provied.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy like is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 7 days curing, testing shall be done by flooring for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Putz Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement 32mm dia 450mm long GI Spout light grade shall be provided in all sunken slabs to drain off water

M&L for repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional aerea not exceeding 150 sqcm) and cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.

Surface Preparation: M&L for Surface preparation of structural part by gentle chipping by manually to make the surface rough and thoroughly cleaned with air as per standard practice and directions of Engineer-in-charge (including removal of external plaster, wherever exists) COST inclusive of transportation, labour, conveying debris away from the site (50 m max.), tools and tackles, lead and lift etc., complete.

Rust Removing : M&L for Cleaning the rusted reinforcement and exposed surface by wire brush mechanical device or any other established method and applying rust removing solution of approved make and quality with cotton waste swap to reinforcement and allowing to dry the same for 24 hours, etc. complete.

IP-Net RB: M&L for applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB or equivalent of approved make and quality comprises of resin and hardner mixed in equal proportion by volume with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc. complete.

Bonding Coat: M&L for Providing and applying a priming cum bonding coat of two component Epoxide Resin confoms to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing Base and curing agent in 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer. Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge etc.complete.

Suttering: M&L for Providing & Fixing the formwork of to pour the micro-concrete / concrete using steel sutters or 12mm marine ply to have the form finish including de- shuttering, etc. complete.

M&L for mild steel reinforcement TMT bars 10mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not les than 0.90mm dia

Micro concrete: M&L for providing encasement to columns/beams/pardi etc. with free flow high strength non shrink micro concrete M-35 using single component cement micro concrete shrinkage components and added with 100% by weight saturated dry stone dust water cement ratio shall be maintained properly as per manufactures specifications to achieve dense solid mass prepared micro concrete shall be poured properly as per in prefixed holding boards slurry tight form work properly aligned to required size and shape and well oiled air bubbles if any shall be removed by tapping the boards removing the boards after 24 hours and curing the micro concrete thoroughly for 14 days cost inclusive of shuttering curing etc. complete. (Note: Microconcrete mixing with 6mm down size aggregates in the ratio of 1 part micro concret with 0.3 part of aggregate by weight.)

Carbon Fiber(430GSM): M&L for Strengthening structural elements with non metallic composite fiber wrapping system comprise of uni-directional carbon fiber sheet (430 GSM) and compatible saturant Profiling: Applying compatible primer on prepared substrate, Filling the holes and uneven surface with thixotropic putty etc. complete Mechanized wetting of fiber sheet: Cutting the fabric to required size. Mixing of saturant and filling in tub area of the saturation machine. Placing the fiber on metallic rods and pass through the rollers of machine and saturant tub ensuring complete wetting (65% fiber volume fraction) of fibers. Remove the fiber on rod and place the new fiber sheet. Wrapping: Wrapping the fiber sheet to structural element at desired orientation using tamping roller to avoid any air voids etc. repeat the same procedure for multiple layer with the interval of 8 hrs. Second Coat: Applying second coat of saturant after min. 12 hrs, rectify air voids if any . (Mode of measurement: Per sq.mt of carbon fiber sheet consumed and not surface area of application)

Carbon Fiber Anchor: M&L for providing and fixing carbon fiber anchor including drilling hole in the base concrete fixing the anchor ussing epoxy system spreading the anchor fibers in star pattern including appication of saturant etc. complete.

20mm Thick Polymer: M&L for providing and applying 20 mm thick polymer mortar to load carrying R.C.C. member in two layers in proportion of 1:5:15 by weight of Polymer of approved make and quality, cement and quartz sand with required water cement ratio for desired consistency and applying and finishing by floating, after curing initial setting time applying bonding coat for 2nd coat etc. as per manufactures specification etc. complete. (With prior approval by SEMC)

M&L for applying two coat of impermiable flexible waterproof coating of a mixture of cementanious material and acrylic emulsion. Mixing: Shake well the liquid component to a homogenous milky colour , before mixing transfer entire quantity of liquid component into a suitable clean mixing vessel, gradually start addition of powder component under constant mixing with a stirrer using a pneumatic or electric power tool (1kw) at slow speed at 250 – 300 rpm for 3- 5 minutes to a homogeneous & uniform free flowing slurry. Application: Two coat of mixed slurry to be applied to the set concrete @ 1.5 - 2kg/m2 by a masonry brush, roller or appropriate power spray equipment.( Make: Dr. Fixit pidifin 2K)

Taking down carefully existing bitumenous/tarfelt treatment including plaster or screed and cleaning the surface of roof including flashing and junctions of parapet, kerb,wall etc with wire brushes etc scrubbing with water and removing rubbish out of defence land.

M&L for rendering 15mm thick in CM 1:4 on roof surfaces finished even and smooth with extra cement including waterproofing compound complete all as specified and directed.

M&L for water proofing treatment over RCC slab by applying oil bound bitumen primer @ 0.25 kg/Sqm and providing on A coat of hot blown type bitumen of grade 85/25, applied hot at the rate of 1.25 kg/sqm and laying 3mm thick APP modified water proofing memberane weighing not less than 3.50 kg/sqm, reinforced with non woven polyester reinforcement matt weighing not less than 160 gm/sqm polyester core, having soften point not less than 140 degree c, longitudinal tensile strength not less than 650N/5cm tearing of 180 N, torch application and applying a coat of solar reflective aluminium paint on membrane surfaces @ 0.15 Kg/sqm including ponding test complete all as specified and directed by Engr-in-Charge.

S&F vitreous china wash hand basin, coloured, flat back, size 630mm x 450mm excluding pillar tap, waste pipe, and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs.

S&F in repairs stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes as for unions all as specified and directed of size 15mm bore.

S&F in repairs pillar taps fancy type , cast copper alloy with capstan heads chromium plated, screwed down high pressure ,with or wirhout lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15 mm bore of pipe.

S&F readymade low density polythene pipe 15mm dia bore & 450mm long complete with brass union on either ends to suit for 15mm dia GI pipe for connecting to inlet of flushing cistern/WHB.

S&F in repair chromium plated shower roses with or without swivel jiontes , any size, including fixing to steel pipe or union.

S&F in repairs bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15 mm dia

S&F in repair wash down water colset pedestal pattern white (excluding flushing cisern and flush pipe) complete all s specified and directed by Engr-in Charge.

S & F in repair EWC and flush combo, vitreous China white ('Deimos' 92044 of Hindware or equivalent) all as directed as directed.

S & F for PVC pipe flexible for 32 mm bore

S & F for PVC pipe flexible for 40 mm bore

10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets fixed in repairs.

S&F pipe in repairs flush pipe of polythelene of low or high density of PVC 32 mm dia for low level cistern all as specified and directed

Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs.

Taking up or down 20 mm dia tubes galvanized iron and connections & removing/ shifting to site/store incl cleaning for relaying/refixing where directed. Note :- 1. Rates quoted are inclusive of taking out bib taps,PVC float valves and fitting as per site condition.

All as per item No 81.00 above but 15mm dia

Re-fixing only tubes galvanized iron as directed incl renewal of threading/tread cutting at ends of GI pipes fixed to walls or laid in floor and jointing incl S/F new fitting such as socket, bends, elbows, union etc all as specified and directed of size 20 mm dia

All as per item No 83.00 above but 15mm dia

S&F for tubes medium grade galvanized with all fitting fixed to walls, ceiling and laid in floor of sizes 20 mm dia

All as per item No 85 above but 15mm dia

Taking down AC rain water pipes (any size or pattern incl all fittings heads bends swan neck etc.

S&F PVC (SWR) pipes single socketed 110mm bore in any length with to walls/floors incl inserting into wall, roof slab etc and sealing/making good to match the existing surface all as specified .

All as per item No 88.00 above , but for 75 mm dia

S & F 110mm bore PVC (SWR) bends any radius with rubber ring joints or jointed with solvent cement fixed to walls

All as per item No 90.00 As above , but for 75 mm dia

S & F 75mm PVC (SWR) vent cowl.

S & F 110mm PVC (SWR) vent cowl.

S & F PVC (SWR) branch piece, Double (Double Y) equal Each or unequal 110 mm bore with access door all as specified and direcred.

S & F PVC (SWR) juction (single "T") equal or unequal, Each bore 110 mm with access door, complete all as specidied and direcred.

S & F 75 mm dia PVC (SWR) floor trap, plain with grating Each including jointing with solvent

M & L for PVC (SWR) gully trap 125/110 mm setting and Each jointing with solvent cement

Dismantling water tanks exc 250 & n exc 500 lyr capacity.

Dismantling water tanks exc 500 & n exc 1000 lyr capacity.

Dismantling water tanks exc 1000 & n exc 2000 lyr capacity.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 litre capacity, hoisted and fixed in position all as specified.

S&F Ball valves 20mm bore high pressure of PTMT with epoxy coted aluminium rod and high density plastic bal screwed for iron pipe and fixed (minimum weight 210 gms ) fixed in repairs.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc.15 cms thickness (below or above GL.)

M&L for cement concrete type D-2, 1:4:8 (40 mm graded agg) in foundation, filling and mass cocrete sub base etc.

M&L for machine pressed precast concrete interlocking paver block(With grey cement and no pigment) with lacquer finish any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement & pigment including 30 mm thck sand cushion.

E/M Portion Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down and hanging during point wiring of ceiling fan/exhaust fan of any size and sweep in proper manner and connecting up including provision of cable from ceiling rose or connector to fan all as per specified and directed by Engr-in-Charge

Dismantling unserviceable main switch/DBs with MCBs and wooden board including making good disturbed surface of wall.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

All as per Item No. 114.00 but One light point controlled by one, one way switch

All as per Item No. 114.00 but One ceiling /exhaust fan point controlled by one switch and regulator

All as per Item No. 114.00 but One 3 pin 5 amp socket out point on the same board with other switches.

All as per Item No. 114.00 but One3 pin 5 amps socket out let point on independent board

All as per same in item No 114 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.

S &F Switch piano flush type single pole one way 5 amps.

S &F Socket outlet 2 in 1, 3 pin, 6A

S &F Switch socket combination 2 in 1, 6A flush type

S &F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal

S &F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body

S &F Electronic regulator 100/120 Watt step type

S &F Lamp holder insulated body with back plate for angle holder including 9W LED Lamp all as per specified.

Refixing of tube light from exisiting position to new position as required at site all as directed and specified .

Refixing of wooden/PVC rectangular block for mounting, switches, sockets,fan regulator, call bell, bell push etc. with 3 mm thick plastic laminated sheet cover/helum sheet of ISI mark as required on ground including casing capping /conduit of any size, all as specified and directed by Engr-in-Charge.

Refixing of DB's including MCB's of any size, all as specified and directed by Engr-in-Charge.

S&F LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F 15 Watt LED streetlight fitting luminaire made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.

M&L for fabrication,supply & fixing of GI pipe bracket up to 40 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 15 w LED security light fitting

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC CASING CAPING not less then 20mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 2.5 sqmm for earthing and one run of PVC casing/caping shall be measured as one unit.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC casing capping not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing capping shall be measured as one unit.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPPING not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 6 sqmm and one run of PVC casing capping shall be measured as one unit.

S&F Sheet metal enclosure factory made for DBs Triple pole and neutral double door 415 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

Supply and fix for MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps

S&F MCB, single pole and neutral, 240 Volts , 40-63 Amps all as specified and as directed.

S&F MCB, single pole and neutral, 240 Volts , 6-40 Amps all as specified and as directed.

S&F MCB singal pole 240 Volts , 32 to 63 Amps all as specified and as directed.

S&F MCB singal pole 240 Volts , 6 to 32 Amps all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal, common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-5 of SSR-1991 (part-I)

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 20565.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/S SAMEER SUBHASH PATANI

Bidder Name

M/S SAMEER SUBHASH PATANI

Alpha Construction