CERTAIN SANCTIONED WORKS UNDER GE NAGROTA AT NAGROTA MIL STN

Amount

SCHEDULE ‘A’ PART-I ( LIST OF B/R WORKS AT NAGROTA) Excavation in trenches in any type of soil not exc 1.5m wide and n.exc 1.5m in depth for electric poles stay foundation and under ground electric power cables and getting out complete all as specified.

Surface excavation nexc 30cm and averaging 15cm deep in soft/loose soil complete all as specified.

Surface excavation n exc 30cm deep and averaing 15cm deep and getting out any type of soil complete all as specified and directed.

M&L for hard core of broken stone n exe 63 mm, deposited, spread and levelled in layers n exe 15 CM thick, watered and rammed to a true surface complete all specified and directed

M & L for cement conc type D2 1:4:8 (40mm graded aggregate) 75mm thick complete all specified and directed

M & L Sand for filling under interlocking paver block etc including watering and consolidation complete all as specified

M&L machine pressed pre cast concrete interlocking paver ( with grey cement and pigment) any shape and size confirming to IS -15658-2006 of 60 mm thickness ,M-40 grade complete all specified and directed

M & L for machine pressed pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and pigment complete all as specified and directed.

M&L PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in copings, benching, weathering and slightly chamfering all as spd and directed

Excavating in post holes (orsimilar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft soil complete.

M&L for Cement concrete in foundations,filling and mass concreteType D2 1:3:6 (40 mm graded coarse agg) complete all as specified & directed

M&L for PCC 1:4:8 Type D-2 (using 40mm graded Agg) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete all as specified & directed

M&L for fiber glass reinforced translucent plain sheeting with side laps fixed with self tapping screws/L-type or J-type or cranked hook bolts as per manufacturer instruction complete all as specified and directed.

M&L for preparation of newely painted steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Eng-in-charge.

M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces.complete all as specified & directed

M&L one coat of synthetic enamel paint on steel surfaces of any description not otherwise described over 10cm width or girth including preparation of old surfaces complete and all as specified and directed

Excavation in trenches n exc. 1.5m wide and n exc. 1.5m deep and getting out in any type of soil complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks old size, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 CM complete all as specified and directed.

M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks complete all as specified & directed

Rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, finished even and smooth W/O using extra cement complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and as directed.

Removal of excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15cm thick (below or above ground level)complete all as specified & directed

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.complete all as specified & directed

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion.complete all as specified & directed

Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing),removing serviceable tiles to store and rubbish off the premises complete all specified and directed

M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finished even and fair surface.complete all as specified & directed

M&L for Machine cut kota stone flooring 18-20 mm khick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface.complete all as specified & directed

M&L for Machine cut kota stone slab 18-20mm thick in skirting, dado and pillar laid and riser of stair case size (0.90-1.00x 18-25cm) jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in CM ( 1:4) including taking out of existing dado.complete all as specified & directed

M&L for cement concrete 1:3:6 type C2, 75mm thick (20 mm graded stone agg) as in plinth protection.complete all as specified & directed

M&L for PCC (1:3:6) Type C1 using 20mm graded stone agg as in surface channel & drain incl form work. complete all as specified & directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site.

Taking down shutter exceeding 2.00 Sqm removing from site complete all as specified and directed.

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed

S & F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.

S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing. complete all specified and directed

M&L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 30 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.

S&F 19mm thick solid PVC board prelaminated one side vinereed and other side plain as in cupboard shutter,shelves, partitions and kitchen cabinets ( Board must be water proofing ,termite proof) .

M&L for Block boards 18/19mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work. complete all specified and directed

S&F Galvanised mild steel wire cloth 0.457mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples complete all specified and directed

S&F Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.in each pane complete all specified and directed

S&F 100mm long butt hinges (medium weight) colled rolled mild steel.complete all specified and directed

S& F Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate 140mm

S&F Extruded aluminium alloy handles fabricated type anodised of size 125mm long 12mm dia. complete all specified and directed

S&F MS 300 mm ordinary rat rails rod pattern springs including roller and roller plate.complete all specified and directed

S&F Hasp and staple Alumnium anodised lncluding bolt to hinges plate 100mm size complete all specified and directed

S&F 250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.complete all specified and directed

S&F Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. complete all as specified & directed

M & L for Form work to chajjas and cooking slab troughs and similar items including edges for rough finsihed surfaces complete all as specified & directed

M & L for Form work to edges of concrete flats RCC/PCC band exc 5 cm but exc 10 cm.for rough finsihed surfaces complete all as specified & directed

M & L for RCC 1:2:4 type B-1 ( using 20mm graded crushed stoneagg) as in chajjas shelves and similar items.

M&L of Granite stone 20 to 22mm thick laid bedded and jointed with grey cement slurry mixed with pigment to match the shade of the stone including polishing ( mirror finish) over 15mm thick screed bed in CM ( 1:4) as in floor, slabs, platform slab finished to existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface.

Dismantling brick tiles or terracing tile, single layer on roof including cleaning the roof surface and filling the cracks with silicon compound if obsserved on roof

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 50mm thick as in padding finished even and smooth witout using extra cement

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm

M&L for Laying APP (atatic polypropylene) modified membrane 3mm thick and weighing not less than 3 kg/sqm with 160 GSM/sqm, non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap, the membrane has to be laid with LPG tourch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane.

M&L for Cement concrete tiles 25 cm x 25cm x20mm thick machine pressed set jointed and pointed in neat cement slurry on roof over APP membrane laid over 15mm thick cement screed bed in cement mortar 1:6

M&L 450x 300mm thick coloured glazed ceramic tiles as on walls/ vertical surfaces over 15mm cement rendering in cement mortar 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) , removing serviceable tile to store and rubbish off the premises.

Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 15mm

Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 20mm

S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors.

S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down.

M&L for Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls.

S&F in repairs Cast copper alloy CP bib tap fancy type screwed down , screwed for iron pipe 15mm dia/ bore of pipe

S&F Cast copper alloy CPstop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe

S&F Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 20mm dia

Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore.

S&F PVC (SWR) Bends any radius for 75mm bore with oval access door.

S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete.

S&F as in repair kitchen rack made out of 0.63mm thick stainless steel sheet wall mounted type with 5/6 partition of size 60 cms x 90 cms x 25 cm fixed on wooden gutties complete all as directed by Engr-in-Charge.

S&F as in repair stainless steel sink made from AISI-304 (18/8) gde steel of 1mm over all size 688x534 bowl size 610x455x250mm complete all as directed by Engineer-in-Charge & with following specification :- (a) Stainless steel waste coupling. (b) 02 Nos MS angle iron bracket 45cm long made out of MS angle iron 35x35x5mm. (c) Waste pipe and waste coupling.

S&F Framed work rolled section as in framing compound girder staging for water tank,cooler frame as and the like built up from two or more beam or channel section or angles with plates stiffeners etc complete.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally)

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished using wpc ( wpc to be paid measured and seperately) even and smooth without using extra cement all as specified ( Externally)

M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including three coat of white wash on ceiling including preparation of surface .

Supply only integral water proofing compound.

M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .

M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .

M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint .

M&L for Complete removal of existing treatment applying two coats of cement base paint old wall surface .

M&L for Anti termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M&L for Anti termite treatment to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site.

Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided.

Solid PVC Door Frames of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F 75mm long butt hinges (medium weight) colled rolled mild steel .

S&F Extruded aluminium alloy handles fabricated type anodised of size 100mm long 12mm dia.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheetto be fitted in the MS frame welded/sealed to the styles and rails with suitablePVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings.

S&F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia.

S&F Galvanised mild steel wire cloth 0.457mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples

Description as per item No 30 but4 mm thick figured glass

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally)

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified ( Externally)

M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including three coat of white wash on ceiling including preparation of surface .

Supply only integral water proofing compound.

M&L for Applying two coats of synthetic enamel paint on new steel surfaces any description, not otherwise described over 10 cm width or girth

M & L for Non-skid coloured tiles 400x400x7mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over & including 15 mm thick screed bed or beddding layer of CM 1:4, complete all specified and directed

M & L for 25mm thick PCC 1:2:4 type B-1 as a sub base to receive topping layer finished even and rough complete all specified and directed

M&L 450x 300mm thick coloured glazed ceramic tiles as on walls/ vertical surfaces over 15mm cement rendering in cement mortar 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) , removing serviceable tile to store and rubbish off the premisescomplete all specified and directed.

M & L for plain Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone agg as in sunken portion of slab up to 3rd floor complete all specified and directed

Taking down steel tubing and connection including cleaning removal to store bore of pipe 15mmcomplete all specified and directed

Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 20mmcomplete all specified and directed

S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down.

S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors.complete all specified and directed

M&L for Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls.complete all specified and directed

S&F in repair Shower rose brass chrominium plated 125mm size. complete all specified and directed

S&F in repairs Cast copper alloy CP bib tap fancy type screwed down , screwed for iron pipe 15mm dia/ bore of pipecomplete all specified and directed

S&F in Brass CP mixer for mixing hot & cold water screwed down for iron pipe , screwed for iron pipe 15mm dia/ bore of pipe.complete all specified and directed

S&F Cast copper alloy CPstop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe complete all specified and directed

All as per item No 114 above but with long shank and cup ( concealed type) complete all specified and directed

S&F Towel rail 600mm long of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 190gm).

S&F Framed work rolled section as in framing compound girder staging for end bars, shouldered and riveted, forged into spikes, framed guard bars, dooriron, ladders walk rails, railings, frame work for tanks, water tank,cooler frame as and the like built up from two or more beam or channel section or angles with plates stiffeners etc complete.

Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 110mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore.complete all specified and directed

S&F PVC (SWR) Bends any radius for 110mm bore.complete all specified and directed

S&F PVC (SWR) Bends any radius for 75mm bore with oval access door.complete all specified and directed

S&F PVC (SWR) Branch pieces single( Single Y) equal or unequal) for 110mm bore with oval access doors complete all specified and directed

S&F PVC (SWR) Branch pieces single ( Single Y) equal or unequal for 75mm bore with oval access doors.complete all specified and directed

S&F PVC (SWR) vent cowl 75mm complete all specified and directed

S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete.

S&F for PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all specified and directed

Dismantling brick tiles or terracing tile, single layer on roof including mud phuska complete with cleaning the roof surface and filling the cracks with silicon compound if obsserved on roof complete all specified and directed

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 50mm thick average as in padding finished even and smooth witout using extra cement complete all specified and directed

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm complete all specified and directed

M&L for Laying APP (atatic polypropylene) modified membrane 3mm thick and weighing not less than 3 kg/sqm with 160 GSM/sqm, non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap, the membrane has to be laid with LPG tourch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane.complete all specified and directed

M&L for Cement concrete tiles 25 cm x 25cm x20mm thick machine pressed set jointed and pointed in neat cement slurry on roof over APP membrane laid over 15mm thick cement screed bed in cement mortar 1:6 complete all specified and directed

Ditto All as per item above above but in vertical place, skirting 10mm thick screed bed/bedding layers in cm 1:4 complete all specified and directed

S&F for vitrious china wash basin, white flat back size 550x400mm including waste, chain & plug andporeclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for sink etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete all as specified and directed.

S&Fas in repair Vitreous china squatting pan "Orissa " pattern size 580x440mm white with integral foot rest all as fixed in repairs including ‘P’ or "S" trap including PVC low level cistern of 10 litres capacity including brackets jointing to flush pipe, PVC connection (450x15mm) flushing pipe complete fixed in repair all as directed by Engr-in-Charge.

S&F as in repair 110 mm PVC (SWR) WC Connector with lip ring

Providing and laying of water proofing treatment to sunken portion including vertical portion by applying cement slurry make with acrylic based polymer modify cementeneuous composite compound make as specified and including demolition and filling of sunken floor with and including PCC 1:5:10 type E2 (Using 40 MM brick aggregate) (a) First layer of slurry of cement @ 0.488 Kg/sqm make with acrylic based polymer modify cementeneuous composite compound @ 0.28Kg/sqm. This layer allowed to air cure for 4 hours (b) Second layer of cement slurry @ 0.242kg/sqm mixed with acrylic based polymer modify cementeneuous composite compound @ 0.125kg/sqm. This layer allowed to air cure for 4 hours (c) The slope shall be 1:20 towards the corner of outer wall and GI pipe of 50mm dia (Med grade) be inserted at corner projecting out side 20cm(d) 15mm thick plaster in CM 1:3 mixed with WPC to be provided while concrete on green (e) Joints of trap WC/Soil pipes shall be properly sealed with sealing compound Note (I):- Concrete for sunken slabs shall be mixted with WPC as per manufactures instructions. Before carrying out water proofing treatment the sunken shall be tested with water for 48 hours for any leakage/dampness is seen in ceiling below. then treatment is again carried out to RCC slab and it is again tested before passing for next stage. Note (II):- Only floor area shall be measured for payment purpose

S & F viterous china Urinal bowl white, flat back size 465x35x265, with grating and union for discharge pipe (excluding flushing cistern,flash pipe, and wate pipe) as fixed in repair

S&F Rotational moulded polyethene water storage tank triple layer 1000 ltr capacity hoisted and fixed in position including dismantling of existing tank and including PVC float valve 20 mm bore .

M&L for Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces.

M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .

M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .complete all specified and directed

M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of Primer.complete all specified and directed

M&L for Complete removal of existing treatment applying two coats of cement base paint old wall surface .complete all specified and directed

M&L for Preparation of new plastered surfaces of ceiling and applying two coat of white washing, all as specified.

M&L for Preparation of old plastered surfaces of ceiling and applying two coat of white washing, all as specified.

M&L for Septic tanks, exc, in any type of soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 200 users.As per Drg No.CEUZ/TD/120/3(1/3) dt 16/3/10.complete all specified and directed

M&L for Soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/ RR masonry/filling with brick bats, complete of size 3.0 M dia X 3.0 M deep.As per Drg No.CEUZ/TD/120/3(1/3) dt 16/3/10.complete all specified and directed

M&L RCC NP3 200 mm dia meter pipe depth avarage 0.70m to 1.65 mtr with 150 mm th PCC in 1:4:8, laid on 150 mm thick bed with excevation in any type of soil including main holes/drop manhole of standerd size made of brick masonary/RCC/Precast RCC with SFRC ventilating cover and frame. Including all items and activities to execute and sewer line functional complete all as specified and as directed by Engr-in-Charge.

Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge

Taking down ceiling fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following;-

(a) One light point controlled by one switch 5 Amp.

(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp

(c) One 5 pin socket out let 5Amp controlled by one switch on same board.

(d) One 5 pin socket out let 5 Amp controlled by one switch on independent board.

All as per item No 155 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.

S&F switch piano flush type 5 Amps single pole one way complete,

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete.

S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type complete.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.

S&F for lamp holder including 9 Watt Bulb PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-Charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and as directed by Engr-in-Charge.

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.complete all as specified and as directed by Engr-in-Charge.

S&F MCB SPN 40 Amps 10 KA 230 volts "C" series complete all as specified and as directed by Engr-in-Charge.

S&F MCB single pole 6 to 32 Amps 10 KA 230 volts "C" series complete all as specified and as directed by Engr-in-Charge.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and as directed by Engr-in-Charge.

Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 25×4 mm by means of bolts, nuts, check nuts and washers of galvanised iron including pit of PCC (1:2:4) type B-1, pre cast RCC cover slab of size 550x550x75mm, XPM reinforced not less than 1.60Kg/Sqm with suitable built in handle made from 12mm dia MS round bar, excavation and earth work in any type of soil, 20mm dia bore medium grade galvanised iron water tubing fixed with cast iron funnel and wire mesh at one end, 15mm bore light grade galvanised iron protection pipe for earth lead wire upto 5m length, charcol, common salt complete all as shown in electric plate No 5 of SSR 2009 Part I connected to equipment, testing on completion, complete all as specified and directed.

Supply and fixing aluminium strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed.

S & F Air termination, single pointed aluminium rod 12mm dia and 300mm long embeded in 60 mm thick PCC 1:2:4 type B-1 (20 mm graded stone aggregate) complete all as specified and directed by Engr-In-Charge.

Supply and fixing test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex. head screw all as specified.

S&F 40 mm bore galvanized, “Medium grade”, supplied and laid complete including fittings complete all specified and directed

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following;-

All as per item No 178 above here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece complete all as specified and directed by Engr-in-Charge.

15 mm bore galvanized steel water tubing medium grade with all GI fittings (as union, tee, socket, nipple, elbow) including taking out old unserviceable pipes by cutting, screwing and altering the old pipe lines if any required at site including cutting chase, fixed in walls, ceiling and laid in floors complete and making good to disturbed surface all as specified and directed

S&F Brass CP mixer bend for mixing hot & cold water screwed down for iron pipe and fixed in wall after cutting the wall and making good to disturbed surface all as directed by Engr-in-Charge.

S & F in repairs,Fancy type Bib tap, cast copper alloy with crutch or butterfly handle 15mm bore screwed down, screwed for iron pipe or for brass ferrule (ISI marked) or equivalent as approved complete all as specified and as directed by Engr-in-Charge.

S & F in repairs,125 mm dia Fancy type shower rose with arm swivel type fixed to 15mm dia pipe all as spd and making good to disturbed surface.complete all specified and directed

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.complete all specified and directed

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections.complete all as specified and as directed by Engr-in-Charge.

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified.

S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified.

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 6 module complete all as specified.

All as per Item No-194 above but 3 module complete all as specified.

All as per Item No-194 above but 2 module complete all as specified.

All as per Item No-194 above but 8 module complete all as specified.

All as per Item No-194 above but 12 module complete all as specified.

S & F Modular blanking plates 1 module complete all as specified.

S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete all specified and directed

S&F MCB single pole 5 to 32 Amps 10 KA 240 volts "C" series complete all specified and directed

Supply and fixing LED lights fitting 1x 18 W, 220V, AC connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all specified and directed

S&F sheet metal enclosure distribution board SPN 08 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.complete all specified and directed

Supply and fix Exhaust Fan made of sturdy Engineering plastic complete with louvers shutter,voltage 230V, 50 Hz, RPM 1200 , copper winding of sweep 300mm complete all as specified and directed.

S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete ,all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 2 core nominal cross section in service connections complete all specified and directed

U K Engineering Works (BID ID -3098361)

ASHWANI KUMAR KHAJURIA AND SONS (BID ID -3102324)

MAMTA ENTERPRISES (BID ID -3119630)

BHARTI CONSTRUCTIONS (BID ID -3112524)

SUNIL AND CO (BID ID -3097260)

M/S CJ CONSTRUCTIONS (BID ID -3119125)