PROPOSED CONSTRUCTION OF OFFICE AND RESIDENTIAL COMPLEX AT FATEHGARH FIRE BRIGADE,AT WARD NO.8 Z-02

Amount

PROPOSED CONSTRUCTION OF OFFICE AND RESIDENTIAL COMPLEX AT FATEHGARH FIRE BRIGADE,AT WARD NO.8 Z-02

dia perfectly vertical to receive casing strainer pipe by suitable method prescribed in 2800 including collecting samples from different strata preparing and submitting strata chart bore log including hire and running charges of all equipment tools plants and machineries required for the job all complete as per direction of engineer in charges up to 90 meter depth

Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. Rocky strata including Boulders.: 200 mm dia.

Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. Rocky strata including Boulders.: 200 mm dia.

Supplying, assembling, lowering and fixing in vertical position in bore well UNPLASTICIZED PVC MEDIUM WELL CASING (CM) PIPE OF REQUIRED DIA CONFORMING TO IS : 12818 INCLUDING REQUIRED HIRE AND LABOUR CHARGES FITTINGS AND ACCESSORIES ETC. ALL COMPLETE FOR ALL DEPTHS AS PER DIRECTION OF ENGINEER-IN-CHARGE. 200 MM DIA

roviding and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

required dia made of 100 x 10 mm flat to the top of casing/ housing pipe of tube well as per IS : 2800 (part 1), including necessary bolts and nuts of required size complete.

TUBE WELL PUMP SET L.S

for water harvesting at ground Excavation for 110mm

roof top harvesting from roof slab to Ground floor including all fitings, jointing material with bypass arrangement with suitable valves.

including dismantling of floor area for contraction of pit, excavation in all type of soil/murrum, brick masonry with chimney brick TM-40 (with making outlet, inlet, outlet hole as per designe in cement mortar 1:4, with 12mm thick plaster in cement mortar 1:3

RCC cover 0.075m thick without frame for percolation pit including cost of steel.

3.6 m for water harvesting system 200 mm dia

Add for ever 50 cm depth where depth is is more than 3.6 m

direction Engineer in charge and fixing in Rain water recharge pit/Percolation pit or sokway with jute coir wrapping pipe. 200 mm dia.

as given below in recharge pit/ percolation pit or soak pit/ waste water treatment system sand (1.5 mm to 20 mm)

Gravel / Pebbles (5 to 25 mm)

Brick bats

Decorative Lamp Post with LED Top Black Painted Galvonized pole in different cross section with gold colour painted decorated cast aluminium rings. Base plate is welded to pole with 4 numbers mounting holes integeral connector blocks for loop-in loop-out is flushed in bottom section of the pole, 6 mtr height

Recess mounting low depth aesthetically designed LED 2x2 & 4x1 flat panels to enhance the delight of occuants with confortable experience through its classic design & glare free soft illumination. Cool White 36 watt

Suspended circular LED lulminaire that combines beautiful designs with required illumination level suitable for office general lighting & break-out areas. BSTAP 30 watt White

LED Tube light aluminium body 18/20 watt

Sleek square recessed mounting LED downlight with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation. 15 watt White

Surface mounted round LED downlight with AL die-cast body, finish with drop down Pcdiffuser to deliver low glare illumination with optimized heat sink for effi

Dry Chemical Powder (DCP) Type – 5 kg duly refilled & ready to use

ABC Type duly refilled & ready to use

CO2 Type duly refilled & ready to use

Buckets set with stand & stand dulyl pai

Lonization smoke detector Providing and supplying lionization smoke detector of peter autokits / nittan / nutrex make , off white colour , including all necessary conduting & wiring to main panel, mounted on false ceiling,

Moniter system with alarm facilities Providing and supplying monitor system with alarm facilities, sensors, battery backup, automatic ward – up extra siren facilities and all required arrangements required for fire protection system, of peter autokits / nittan / nutrex make, including all necessary wiring. Including all material, labour as directed by architect.

Close circuit camera and PA system Supplying, installation, testing and commissioning of close circuit camera system at parkings , coridoors , stairs , building surroundings, exit-entry point with computer system I-7 core Fifth Generation 40 GB RAM and 500 GB Hard Disk and PA system as per requirement of site and as instructed by engineer-in-charge.

Outdoor type switching unit fabricated Supplying, installation, testing and commissioning of outdoor type switching unit fabricated from 16 SWG CRCA MS sheet the unit shall be dust and vermin proof. The unit shall be provided with following 1no. 32A TPN MCB as incomer 1no. 40A TP control contractor 1no. 0-24 Hrs. Timer 6no. 16A SP MCB

Providing laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers jointing with nuts bolts, gaskets and welding etc. underground including excavation and providing cement concrete blocks as supports, at prescrived intervals and anticorrosive treatment with coal tar/asphalt tape as per IS 10221, with 4mm thick fiber renforced tape and 12mm overlap and refilling the trench etc. of following sizes complete as directed by Engineer-In-Charge.

Providing laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gaskets and welding etc. and fixing the pipe on wall / ceiling with suitable hangers, clamps, supports as required and painting two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-In-Charge.

Providing laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gaskets and welding etc. and fixing the pipe on wall / ceiling with suitable hangers, clamps, supports as required and painting two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-In-Charge. 150 mm

Providing laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gaskets and welding etc. and fixing the pipe on wall / ceiling with suitable hangers, clamps, supports as required and painting two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-In-Charge. 100 mm dia

Providing laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gaskets and welding etc. and fixing the pipe on wall / ceiling with suitable hangers, clamps, supports as required and painting two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-In-Charge. 80 mm dia

Providing and fixing single headed hydrant valve with instaneous Gun metal couplings of required dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank gunmetal cap and chain, adopter as required complete as directed by Engineer-In-Charge. 63 mm dia

Providing, Fixing, including testing and commissioning the following sizes of flanged type sluice valves of cast iron body and bronze/ gunmetal seat cofiming to class PN 1.6 of IS: 14846/ IS: 780 complete with bolts and nuts, rubber insertion etc. as per specification complete as required. 150 mm dia

Providing, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 150 mm dia

Providing, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 100 mm dia

Providing, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 80 mm dia

Providing, installation, testing and commissioning of dual plate non- return valve of following sizes confirming to IS 5312 complete with rubber gasket,

Providing, installation, testing and commissioning of dual plate non- return valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 100 mm DIA

Providing, installation, testing and commissioning of gun metal valves of following sizes as required. 25 mm dia

Supplying and fixing following dia, 15 mtr long RRL hose pipe with following dia male and female gun metal couplings duly binded with GI wire, rivets etc. confirming to IS 636 (type-A) as required. 63 mm dia

Supplying and fixing first -Aid hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with the following as required. a) 30/36m long 20mm (nominal internal dia) water hose thermoplastic (textile reinfirced ) type -2 as per IS 12585 b) 20mm (nominal internal) dia gun metal globe valve and nozzle. c) Drum and brakets for fixing the equipments on wall. d) Connections from riser with 40 mm dia stop valve (gun metal ) and M.S. pipe

Supplying and fixing hose cabinet of size 900mmx600mmx500mm made of mm thick MS sheet with 4 mm thick float glass doors in front painted "FIRE" in red paint i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15mtr. Long hose pipe, 1 no branch pipe mounted on wall or raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant, as directed by Engineer-In-Charge.

Supplying and fixing 63mm gun metal branch pipe with 20 mm (nominal internal diameter) size gun metal nozzle conforming to IS 903, suitable for instaneous connection to interconnect hose pipe coupling as required.

Providing and fixing angle iron (40mmx40mm x5mm) door frame and MS sheet (2mm thick) cum glass shutter of size 2.1mtr. X 1.2mtr. (N.S.) with 25mmx25mmx3mm angle frame all around and stiffened in between i/c hinges, handle, locking arrangement, painting with approved synthetic enamel paint including sign writing on glass at internal hydrant including providing and fixing MS sheet 2mm thick on remaining portion above door to close opening including painting etc. as required

Supplying and fixing 4 way fire brigade connection of cast iron body with 4 nos. gun metal male instantaneous inlet couplings complete with cap and chain as required. For 150mm dia MS pipe connection, confirming to IS 904 as required.

Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm. in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shape as required.

Providing fixing testing and commissioning of cast iron body and brass/bronze working parts comprisisng of water motor alarm, bronze seat clapper arm, hydrulicaly driven mechanical gong bell to sound continous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency release, stainer, pressure switch, cock valves and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc. of size 150mm dia and obtaining NOC from local bodies etc required.

Providing and fixing pressure transducer (dial type pressure guage with isolation cock) in MS pipe line (dial diametre 100mm pressure range 0-10 kg/cm) suitable for 12 volts /24 DC. Including connection etc. as required.

Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket confimimg to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 4.5 Kg.

Providing and fixing of ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket confimimg to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 6 Kg

Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor. 3½ CORE ARMOURED 95 Sq.mm

Laying of one number armoured / unarmoured power cable 1.1.kV grade of size exceeding 25Sq.mm but not exceeding 120 Sq.mm direct in ground including excavation in all soil / murrum / soft rock, sand cushioing, protective covering and refilling the pit etc. as required.

Laying of one number armoured / unarmoured power cable 1.1kV grade of size exceeding 25Sq.mm but not exceeding 400 Sq.mm in the existing masonary open duct as required.

Laying of one number armoured / unarmoured cable 1.1kV grade of size exceeding 25 Sq.mm but not exceeding 120 Sq.mm on wall/truss with approved type of iron clamps etc. as required.

Supplying & Installation of approved make Diesel Engine driven fire fighting pump water cooled 65 BHP 2150 RPM engine, fuel tank 200 Ltr capacity (empty), accessories, matching flanges, base frame, ARV, fuel gauge, exide 12 Volt battery and charger, lugs & cable between battery and charger. The pump capacity of 2250 litres per minute at total head 70 meters, automatic air release vave, pressure gauges (combination suction gauge, 3½" dail type with ¼" cock and lever handle - 1no., discharge gauge, 3½" dail type with ¼" cock and lever handle - 1no.) as required. All above equipment's are mounted on common base plate. The fire pump set as per NFP

Supplying, installation, testing & commissioning of approved make Horizontally mounted coupled motor (Eff-1) 60hp, 2900 RPM, 3 Ph 415 V with mechanical seal pump delivery of 2280 liters per minute against total head of 70 meter so as to ensure a minimum pressure of 3.5 Kg/Cm2 at the highest. The impeller shall be closed type and accurately balanced dynamically. The pump shall be of cast iron , impeller shall be of bronze and shaft shall be of stainless steel, automatic air release valve, pressure gauges ( combination suction gauge, 3½" dail type with ¼" cock and lever handle - 1no., discharge gauge, 3½" dail type with ¼" cock and lever handle - 1no.) i/c coupling, coupling Guard, base channel foundation & Matching Flanges etc. as required as per specifications. The fire pump set as per NFPA - 20 specifications. Kirloskar / Shakti or Equivalent

Supplying, installation, testing & commissioning of approved make jockey pump horizontally mounted coupled motor (Eff-2) 5.5hp, 2900 RPM, 3 Ph 415 V with mechanical seal pump, delivery of 180 liters per minute against total head of 70/88 meter so as to ensure a minimum pressure of 3.5 Kg/Cm2 at the highest. The impeller shall be closed type and accurately balanced dynamically. The pump shall be of cast iron , impeller shall be of bronze and shaft shall be of stainless steel. i/c coupling, coupling Guard, base channel foundation & Matching Flanges etc. as required as per specifications. Kirloskar / Shakti or Equivalent

Bidder Name

Amount

supreme buildcon pvt.ltd(GSTN-23AAICS5975K1ZT)