Special repair of Guard Rooms

Taking out doors windows and clerestory window shutters (steel pr wood) including stacking within 50 meters lead : of area 3 sq. meters and below

Providing and fixing paneled or paneled and glazed shutter for doors, windows and clerestory windows, including ISI marked MS pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. Klin seasoned and chemically treated hollock wood : 35 mm thick shutters

Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for door,s, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick: Particle board 12 mm thick: veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097,grade I

Providing and fixing wire gauge shutters using galvanized MS wire gauge of average width of aperture 1.4 mm in both direction with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters : with ISI marked MS pressed butt hinges bright finished of required size: Klin seasoned and chemically treated hollock wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked MS pressed butt hinges bright finished fo required sise with necessary screws: Klin seasoned and chemically treated holllock wood 30 mm thick

Providing and fixing ISI marked oxidised MS tower bolt bleck finish (Barrel type) with necessary screws etc. complete : 200 x 10 mm

Providing and fixing ISI marked oxidised MS handles conforming to IS:4992 with necessary screws etc. complete : 125 mm

Applying priming coat : With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing to existing door frames: 25 mm thick PVC flush door shutters made out of a one piece multi chamber extruded PVC section of the size of 762 mm x 25 mm or less as per requirement with an average wall thickness of 1 mm (+ 0.3 mm).PVC foam end cap of size 23 x 10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm MS tube having dimensions 19 mm x 19 mm and 1.0 mm (+ 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filledn with high density polyurethane foar. The top & bottom edges of the shutter are covered with an end-cap of the size 25 mm x 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures's specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the location of hareware will be pasted at appropriate places.

Providing and fixing aluminum tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade with nuts and screws etc. complete : 200 x 10 mm)

Providing and fixing aluminum handle ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade with nuts and screws etc. complete : 200 x 10 mm)

Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per directions of Engineer-In-Charge.

Suppliying brick tiles class designation 100 at site complete as per direction of Engineer-in-Charge

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumpting ground, all complete as per directions of Engineer-In-Charge : With cement mortar 1:4 (1 cement 4 coarse sand)

Renewing glass panes with putty and nails wherever necessary including racking out the old putty : Float glass panes of nominal thickness 4 mm ( weight not less than 10 kg/sqm)

Renewal of old putty of glass panes (length)

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with oil bound washable distemper of approved brand and manufacture togive an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior grimer applier @ 2.20 kg/10sqm

SPT WATERPROOFING SPECIALISTS