Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹39.7 L+₹41,424 (1.06%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹42.7 L+₹3.5 L (8.82%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹43.4 L+₹4.2 L (10.7%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹45.1 L+₹5.9 L (14.9%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | Rakesh Traders L6 | jayanti associates L7 | M/s SNS Construction L5 | M/S ANIL ARORA L1 | AJAY CONSTRUCTION L2 | M R CONSTRUCTION L3 | M/S SWATI CONSTRUCTION L4 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkhat or frames (wooden / aluminium / iron) with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge | 15 | Each | 10 ₹150 Lowest | 155 ₹2,325 | 100 ₹1,500 | 55 ₹825 | 50 ₹750 | 80 ₹1,200 | 90 ₹1,350 |
| 2.00 | Taking down chowkhat or frames (wooden / aluminium / iron) with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge. | 15 | Each | 10 ₹150 Lowest | 170 ₹2,550 | 150 ₹2,250 | 75 ₹1,125 | 50 ₹750 | 100 ₹1,500 | 95 ₹1,425 |
| 3.00 | Taking down shutters of any description area n exc 1 Sqm each complete all as specified and directed. | 30 | Per leaf | 10 ₹300 Lowest | 90 ₹2,700 | 50 ₹1,500 | 35 ₹1,050 | 20 ₹600 | 50 ₹1,500 | 65 ₹1,950 |
| 4.00 | Taking down shutters of any description area exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed. | 30 | Per leaf | 10 ₹300 Lowest | 115 ₹3,450 | 50 ₹1,500 | 50 ₹1,500 | 20 ₹600 | 70 ₹2,100 | 70 ₹2,100 |
| 5.00 | S&F Mild steel work Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 as in small articles like angle iron framing work for manhole, rungs/steps in man hole, complete all as specified and directed. | 40 | Kg | 80 ₹3,200 Lowest | 125 ₹5,000 | 100 ₹4,000 | 90 ₹3,600 | 120 ₹4,800 | 140 ₹5,600 | 120 ₹4,800 |
| 6.00 | M&L for preparing new steel surfaces of small articles like MS rungs etc and treating with coal tar black paint, area tarred not exc 0.1 sqm, each complete all as specified and directed. | 0.1 | 100 Nos | 1,000 ₹100 | 6,000 ₹600 | 1,000 ₹100 | 260 ₹26 Lowest | 1,000 ₹100 | 1,000 ₹100 | 2,500 ₹250 |
| 7.00 | S&F PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening complete all as specified and directed. | 80 | RM | 600 ₹48,000 | 365 ₹29,200 | 400 ₹32,000 | 350 ₹28,000 Lowest | 400 ₹32,000 | 450 ₹36,000 | 400 ₹32,000 |
| 8.00 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge. | 25 | Sqm | 2,500 ₹62,500 | 2,650 ₹66,250 | 3,000 ₹75,000 | 2,100 ₹52,500 | 1,700 ₹42,500 Lowest | 2,100 ₹52,500 | 1,800 ₹45,000 |
| 9.00 | S&F plain solid, straight chowkhat & frames of 2nd class HW (Hollock) wrought, framed rebated on the solid, rounded or chamfered, put together with glue & pinned at joints including preparation of back of chowkhat & treated with coal tar complete all as specified and directed. | 0.3 | Cum | 50,000 ₹15,000 | 49,000 ₹14,700 | 50,000 ₹15,000 | 3,200 ₹960 Lowest | 36,000 ₹10,800 | 80,000 ₹24,000 | 62,000 ₹18,600 |
| 10.00 | S&F 25 mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed. | 8 | Sqm | 1,400 ₹11,200 | 1,650 ₹13,200 | 1,800 ₹14,400 | 1,400 ₹11,200 | 1,400 ₹11,200 | 1,500 ₹12,000 | 1,300 ₹10,400 Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
24 Oct 2025, 6:00 pmClosed
GE E/M Lucknow
Garrison Engineer E/M, 36 LBS Marg, Lucknow Cantt, Lucknow (U.P.) PIN 226002
REPAIR / MAINT TO WOODEN / STEEL / ALUMINIUM JOINERY, CEILING, ROOF TREATMENT, PLASTERING, PLUMBING WORKS INCLUDING INTERNAL WIRING AND OTHER CONNECTED WORKS AT CH (CC) UNDER GE E/M LUCKNOW
2025_MES_725508_2
GE/EM/LKO/HOSP/T-14 OF 2025-2026
Open Tender
Civil Works
Item Rate
180 days
Lucknow
As per NIT
8 documents required · 8 mandatory
₹500
GE E/M Lucknow
₹98,000
Yes
27 Nov 2025
26 Sept 2025
27 Oct 2025
26 Sept 2025
24 Oct 2025
10 Oct 2025
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
Tender14.pdf
Tender Documents • 1.36 MB
BOQ_820486.xls
BOQ • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .