PROVISION OF FOUNDATION TO TWO CSS FOR AED/ALD HANGER TWIN HANGER AT ICGAS RATNAGIRI AND PROVISION OF CLADDING TO SHAFT AT ICGAS RATNAGIRI

Amount

Excavation over areas not exceeding 1.5 metre in depth and getting out in hard / dense soil complete all as specified and directed.

Material & Labour 100mm thick PCC 1:4:8 type D2 using 40mm aggregate as in sub base, floor and paving etc, complete all as specified and as directed.

Material & Labour for formwork to sides and soffit of floor or roof RCC beam sides of lintel beam flat rough finish surfaces to receive the plaster complete all as specified as directed

Material & Labour for Broken stone Broken or Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material & Labour for RCC 1:1.5:3 (M-20) type B1 (using 20mm graded stone aggregate) as in beams, lintel up to 1.5-meter clear span, lintel band etc, complete all as specified and directed.

Material & Labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

Material & Labour for mild steel TMT bars of 6 to 8mm dia and over, bent to shape as required including cranking, bending & binding as in stirrups/rings complete all as specified

Material and labour for machine cut laterite stone masonry wall exceeding 10cm in width of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

Material & Labour 75mm thick PCC 1:2:4 type B1 using 20mm aggregate as in wearing course complete all as specified and as directed.

Supply & Fix Chequered cement concrete tiles 30cm x 30cm x 25mm thick, glossy finish, set with white cement and pigment, jointed and pointed in neat cement slurry in floors with and including 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Material & Labour for Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area 6 Sqcm and not exceeding 13 Sqcm including fitting & fixtures complete all as specified and as directed.

Material & Labour for Second class hard-wood in scantlings as in timber framed or fixed of any type , any pattern or any place including requisite screws and other fitting and fixtures complete all as specified and as directed.

Supply & Fix Continuous (piano) hinges, made up of brass, having width of flap 40mm bright finish complete all as specified and as directed.

Material & Labour for preparation of new timber surfaces with two or more coats of wooden filler and applying French polishing on surfaces of any description complete all as specified and as directed.

Supply & Fix for Mild steel screw bolts (machine made) having dia of neck 05-10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long complete all as specified and as directed

Advait Enterprises (BID ID -3285449)

m/s Pravin s Bhosale (BID ID -3287826)