TP1-011/2020-21

Amount

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for Hard Gravelly soil SS

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for SDR NOT REQUIRING BLASTING

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for MR & DMR NOT Requiring BLASTING

Earth work excavation for foundation including all labour charges including initial lead, lift, etc., complete.for Hard rock Requiring BLASTING

Cutting and removing hard rock by blasting and removing from site including cost of all labour, lead, lift, etc. complete and as directed by the Dept. Engineer at site.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m around the building using BIFLEX-C termite 250ml for 10lit of water etc., complete.

Filling the river sand for filling in the foundation and floor including cost of sand, filling charges as per standard specification(watering & consolidation with all leads and lifts etc., complete.

PCC 1:3:6, using 12-20mm HBG metal foundation/padding including cost of cement, all materials, labour, lead, lift, etc. complete. For transformer plinth

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for column/footing concrete.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for column concrete upto basement level

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for column concrete upto Ground floor.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Grade Beam .

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for plinth Beam .

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Lintel.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Sun shade 600 mm and 1200 mm wide.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof beam.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof slab 125mm thick.

RCC 1:1.5:3 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Precast cover slab

Providing steel reinforcement using steel of grade Fe 500 for RCC works including cost of steel, binding wire and placing in postion of the steel reinforcement, including cost of all materials, lead, lift, etc., complete.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour, lead, lift, curing, etc., complete.

Brick work in CM 1:4 using II class chamber burnt bricks for partition wall including cost of all materials, all labour, lead, lift, curing, etc., complete.

Plastering with CM 1:5, 12mm thick for walls and cable duct including cost of all materials, curing, labour, lead, lift, etc., complete.

Plastering with CM 1:3, 12mm thick for ceiling, beams, sunshade and for transformer plinth including cost of all materials, curing, labour, lead, lift, etc., complete.

Providing Damp proof course using cement mortar 1:3, 20mm thick with water proofing compound including cost of all materials, lead, lift, etc., complete.

White washing 2 coats using emulsion paint over one coat of primer with white colour for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc. complete.

Painting the inside walls with two coats of best quality interior emulsion over primer one coat and two coats of wall putty of approved colour including cost of all materials, etc., complete.

Painting out side walls with two coats of best quality exterior emulsion over primer one coat and two coats of wall putty of approved colour including cost of all materials, etc., complete.

Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with approved acid proof tiles over cement mortor 1:3 20mm thick in floor including pointing with white cement finishing the joints flush pointing the surface etc complete.

Flooring with approved ceramic non-slippery tiles of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete

Paving the floor with best approved quality Pre-polished anti-skid step tiles of 20mm thick laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete as per standard speicification.

Dadooing walls with approved quality of Glazed tilEs of size 300x200 laid in cement mortor 1:2 10mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete( sample to be approved by Dept.Engineer)

Dadooing walls with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 8mm of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Providing and laying weather proof Tiles300mmx300mm size over screed concrete 1:3:6 with average thickness of 25 mm for required gradient and using best quality of one course of weather proof tiles of approved quality using in cm 1:3, 12 mm thick and using 3mm spacer and pointing with water Repellent U Bond and grout including cost of all materials, transport curing etc complete.

Supplying and fixing of anodized aluminium fully glazed door using 101.60 x44.45x2.10mm box section for outer frame, 53.70 x 44.50x2.30mm @1.238kg/m box door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 6mm clear glass including cost of alum clips rubber beedings alum fixtures such as tower bolt, pivot automatic hydroulic door closure brass mortice lock handle ok. Including cost of all materials, labour, leads, lift etc. complete. (1.20x2.40m size single leaf)

Supplying and fixing at anodized aluminiumdoor using 101.60x44.45x2.10 mm @1.608 kg/m box section for outer frame. 53.70x44.45x2.30 @ 1.238 kg/m door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 9mm thick regular grade pre laminated particle board & top panel with 5.5mm thick clear glass including cost of alum. Clips rubber beedings alum. Fixtures such as tower bolt, pivot brass mortice lock handle,with hydralick Door closer etc. of approved quality including cost of all materials, labour, leads, lift etc. complete (1.00mx2.20msize single leaf)

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete. .

Supplying and fixing in position of anodized Al. glazed sliding window of size 1.18 x 1.48m as per ISS 1038-1958 (1245 ISS) using Al. sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg/m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 4 mm tk plain glass including cost of all materials, lock arrangements labour, lead, lift, etc., complete.

Supply and fixing of Aluminium Ventilator fully glazed lover type as per standard specification with approved section for frame and glass 4mm thick including cost of all materials, lead, lifts, labour, etc., complete.

Supplying and fixing of colour Europian type water closet with flushing cistern of Neycer/Parry ware with P"" or "S" trap, seat cover 15 mm dia connecting hos. 2 nos 15 mm dia CP angle valve, hand shower -1 No. including cost of all materials, lead, lift, etc., complete as directed by department Engineer at site

Supplying and fixing in position IWC ORISSA PAN of size 580X420mm colour glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc., complete.

Supply and fixing of white colour wash basin of size 550x400mm with all accessories such as cast iron brackets, 32 mm dia C.P waste coupling, rubber plug and chain, 32 mm dia 'B' Class G.I. waste pipe etc., 15 mm dia GM wheel valve, 15 mm dia nylon connection, complete.

Supplying and fixing in position 110mm dia, best quality ventilating shaft 3.65m height with PVC cowl at top inlcuding cost of all materials, curing labour, leads, lifts, etc., complete.

Supplying and fixing in position 165 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete

Supplying and filling with 40mm HBG metal in dispersion trench, rain water harvesting pit, transformer oil drain pit including cost of metal, all labour, lead, lift, consolidation, etc.,complete.

Supply and fixing 110mm dia PVC down fall pipe 4kg/cm2 avonplast or Finolex make with required bend, tee and GI wall clamp at 90cm intervals including cost of materials, labour, lead, lift, etc., complete.

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete. For 40mm dia PVC Pipe

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete. For 32mm dia PVC Pipe

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete.for 25 MM DIA PVC PIPE

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete.for 20 MM DIA PVC PIPE

Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete as directed by department Engineer at site - 40 mm Dia

Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete as directed by department Engineer at site - 32 mm Dia

Providing and fixing wheel valve of various diameter of Gun metal leader make of best quality including cost of all materials, labour, lead, lift etc., complete. - 25mm Dia

Providing and fixing 12mm Chromium plated pillar tap for water supply with angle stand including cost of pipe and labour for fixing charges, lead, lift, etc. complete.

Supply of S Type chair steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supply of Three drawer steel table with Sunmica top of size 1200x750x750mm by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supply of Steel side rack open type 1100x400x1200 by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supply of Steel half bench 1200x400x600mm by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supply of PVC armed chair of reputed make of approved quality by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete.

Supplying and fixing the name/ designation stickers in doors identifying the rooms including cost of material, labour, etc., complete.

Providing locking arrangements with 6 lever Godrej lock with 3 keys including cost of all materials, labour, lead, lift, etc., complete.

Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.

Supplying and fixing black granite stone Engraved Foundation detail and year of construction fixing in wall at entrance, Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of all materials, leads, lift, etc., complete

Supplying and fixing of GI angle size 50mmx50mmx6mm fixing at 600mm c/c for cable duct inside the control room including cost of all labour, lead, lift, etc., complete.

Supplying and fixing of 100mm dia. stoneware pipe with open joint and covered with pan tiles including all cost of materails, lead, lift, etc., complete.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications.

Providing projected border 7.5cm width in cm 1:3, 20mm thick at top of parapet wall, sunshade and control room inner walls including cost of cement all other materials, labour, lead, lift, etc. complete.

Providing projected border 15 cm width, with cm 1:3, 20mm thick for plinth beam including cost of all materials, labour, load, lift etc. complete.

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing 110mm dia PVC.Bend including cost of materials, labour, lead, lift, etc., Complete

Supplying and fixing 110mm dia Pvc TEE including cost of materials, labour lead, lift, etc., Complete

Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Supplying and fixing musical quartz type Wall Clock of size 30 x30 cm of approved quality and colour including transport, fixing charges, etc., complete.

Supplying, filling & spreading of good quality gravel layer by layer with proper consolidation for substation yard, low lying area, road berms, behind of abutment & wing wall including cost of all materials, labour, lead, lift etc., Complete.

Writing the name of sub station and safety slogn on wall over plasterd surface using approved colour and quality enamel paint over a cost of primer including cost of all materials , lead,lift etc., complete

Conducting Water divining Test for fixing of Bore well point including cost of all hire charges of T&P and Transport charges etc complete.

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification Upto 100 Mts

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification Beyond 100 Mts

Supply and erection of 180mm (7”) dia rigid PVC casing pipe, having 6kg/cm² including cost all materials,lead, lift, re-boring the holes to required depth etc., complete with cover at the top of the bore well.

Supply and erection of 5 HP ELGI compressor (or) any other reputed make of pump having ISI make with 3phase suguna (or) any other approved make 400V/440/50 cycle motor (5 HP) having ISI make (or) as approved by the Board Engineer at site with air pipe of 20mm dia to pump water to a height of 175mts.and delivery unit with foot valve v-belt arrangement including cost of all materials, labour, erection charges, 5 HP, 400/440V L&T make starter to suit the compressor including the cost of all materials, labour, lead and as per the instruction of Engineer in charge at site complete in all respects.

Supply and erection of 3 phase 30/32 Amps ICTP switch with fuse arrangements to suit the compressor with cost of all materials, labour, lead and lift etc., complete in all respects.

Supply and erection of 40mm dia HDPE hose in black colour having ISI mark and as per IS 4984 -84,40mm dia (10 Kg/CM²) in and outside of the bore well including cost of all materials, labour, lead,lift etc., complete.

Supply and erection of 20mm dia HDPE hose in black colour and havingISI mark and as per IS 4984 - 87, (15 Kg/CM²) in and outside of bore well including cost of all materials, labour, lead, lift etc., complete.

Supply and fixing of 15 Amps main fuse carrier in T.W.Board (600x600mm)with hings,screw, hook wall varnished including cost of all materials, lead, lift etc., complete in all respects.

Supply and laying of 12mm G.I. pipe of medium class for air compressor cost of G.I pipe, specials, cutting, threading, labour, lead, lift as per the instruction of Engineer in charge at site.

Labour charges for laying of 4 core 6 Sq mm power cable from nearest power point to 5 HP motor including earth work excavation ,laying power cable in the pit and top covered with country bricks and refilling with excavated earth, lead. lift ,etc. comp

Supplying and erection of 2HP mono block 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point/fan point

Supply and run of 2x1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall ,with 150x100x113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.

Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box with 3 mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion, with suitable colour for concealed power plug point.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work.

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only.

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Supply and fixing of single flu. fitting complete with Electronic choke and condenser with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube. 4 X 16w LED Single Industrial type fitting

Supply and fixing of 4'x16 W LEDTwin type Mirror optic suspension type fitting (Philips/Crompton/Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes.

Supply and fixing of W.T bulk head fitting (Philips/ Bajaj/K.Lite/Crompton Greaves) suitable for CFL lamp with guard and 1No 36 W CFL bulb.

Supply and fixing of fancy glass shade and 18 W CFL for BH point.

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp.

Supply and fixing of 450 mm (18") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supplying and fixing of RCCB safe trip of appd LEGRAND, ISI make, 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make).

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work, with earth connections.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

RAJ ENGINEERING CONTRACTOR

ASAITHAMBI.M

K DHINAKARAN

C.GOVINDAN