ROLLING SHUTTERS WORKSHOP ROOFS AND OTHER MISC BR WORKS IN CIW CICE RECORDS CHQ AREA IN THE AOR OF AGE BR MEG UNDER GE NORTH BANGALORE

Amount

Dismantling timber scantlings in fillet, rail, posts, rafter, purlins etc under 40 sq. cm in section, in any position as in framed work etc complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Taking down shutter of any description area exc 1.00 sqm but not exc 2.00 sqm and refixing in same opening etc complete all as specified and as directed

Dismantling of Single Layer Mangalore pattern roofing tile including ridges bedded in cement mortar etc complete all as specified and as directed. Note: Work reqd to be carried out at height exc 3.00 mtr but not exc 10.00 mtr, accordingly contractor has to provide safety eqpt to worker during excn of work. Nothing extra shall be admissible on this account.

Dismantling of Batten for tiles, shingles etc of any size including tile fillets spaced not exc 15 cm thick etc complete all as specified and as directed. Note: Work reqd to be carried out at height exc 3.00 mtr but not exc 10.00 mtr, accordingly contractor has to provide safety eqpt to worker during excn of work. Nothing extra shall be admissible on this account.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed. Note: Work reqd to be carried out at height exc 3.00 mtr but not exc 10.00 mtr, accordingly contractor has to provide safety eqpt to worker during excn of work. Nothing extra shall be admissible on this account.

Excavating in post holes(or similar holes) each n exc 0.50 cum getting out in Hard / Dense soil soil,returning, filling in and ramming earth in layers n exc 25 cm etc complete all as specified and as directed

Excavating in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc for for shafts, wells cesspits, manholes, piers holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard / dense soil etc complete all as specified and as directed

M&L for plain cement concrete 1:4:8 type D-2, with using 40 mm graded stone aggregates as in foundations and mass concrete etc complete all as specified and as directed

M&L for Form work to sides of concrete foundations (Flat), footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-1, with using 20 mm graded stone aggregates as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and base) etc complete all as specified and as directed

M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finished even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete/stone masonry surface finished even and smooth (without using extra cement) mixed with water proofing compound etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Supply only liquid water proofing compound

M&L preparing of new plastered suface of walls and applying three coats white wash etc complete all as specified and as directed

M&L for preparing newly plastered surface of wall and applying two coat of cement base paint over a coat of primer etc complete all as specified and as directed

S&F Steel work as in tubular trusses including special shape of washer etc complete using ERW or induction butt welded tubes including welding / reveting conforming to IS- 1161-1079 grade st-240 etc complete all as specified and as directed Notes : Work reqd to be carried out hts exc 3.00 mtr but not exc 10.00 mtr, accordingly contracotor has to be provide safety eqpt to worker during excn of work. Nothing extra shall be admissible on this account

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Fe 290 -W (Gde- E- 1650) etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed Notes : Work reqd to be carried out hts exc 3.00 mtr but not exc 15.00 mtr, accordingly contracotor has to be provide safety eqpt to worker during excn of work. Nothing extra shall be admissible on this account

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in ridges / valley to wall, fixed with self tapping screws etc complete all as specified and as directed Notes : Work reqd to be carried out hts exc 3.00 mtr but not exc 15.00 mtr, accordingly contracotor has to be provide safety eqpt to worker during excn of work. Nothing extra shall be admissible on this account

M&L MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed

M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L or J type Cranked Hook & botls etc incl dismantling of asbestos cement (corrugated, semi corrugated, etc.) etc complete all as specified and as directed

S&F 6 mm thick Asbestos cement Sheets, serrated ridge for corrugated or semi corrugated sheets fixed with L or J type Cranked Hook & botls etc incl dismantling of ridge etc complete all as specified and as directed

S&F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L or J type Cranked Hook & botls in lieu of scres etc incl dismantling of existing sheets etc complete all as specified and as directed

M&L providing cement concrete type B-0 1:2:4 (12.50mm graded stone aggregate) in copings, leveling concrete, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

S & F (GI suspended false ceiling grid suspended system of size 600x600mm with main runner, cross tee and wall angle etc (sizes as per manufactrurer instructions). Ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main runner 50 x 25 x 0.65mm cross tee 40 x 15 x 0.65mm & wall angle 25 x 25 x0.65mm of MS galvanised with PPPCGS) including 4mm thick HPSC self textured design pre primered non asbestos fibre cement building board fixed to false ceiling complete including taking down old celing complete of any description .

S&F in repairs 10mm thick PVC insulation panels with EPS stuck to 1mm Colour printed (Any size, shape, Texture as approved) , PVC sheet suitably placed in false ceiling incl making sunken side corner, design as directed etc incl grid work made of GI suspended false ceiling grid suspended system of size 600x600mm with main runner, cross tee and wall angle etc (sizes as per manufactrurer instructions). Ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main runner 50 x 25 x 0.65mm cross tee 40 x 15 x 0.65mm & wall angle 25 x 25 x0.65mm of MS galvanised with PPPCGS). as per Mfd Instruction etc complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooring etc complete all as specified and as directed

M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded stone aggregate) as in levelling course of flooring etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L Glazed ceramic coloured tiles 300 x 200 x 7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L Glazed ceramic coloured tiles 300 x 450 x 7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for vitrified ceramic tiles light shade colour 8-9 mm thick (square/rectangular) polished, area of each tiles not exc 0.36sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed of 15mm thick in CM(1:6) incl Dismantling the existing unserviceable floor/hearth or wall tilling etc complete all as specified and directed

M&L for vitrified ceramic tiles light shade colour 8-9 mm thick (square / rectangular) polished, area of each tiles not exc 0.36sqm in vertical surfaces such as skirtind/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including rendering of 10mm thick in CM(1:3) on Brick work or stone masonry surface as backing coat of tiles incl dismantling the existing unserviceable floor / hearth or wall tilling etc complete all as specified.

M&L 18-20mm thick granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round and polishing incl 15 mm thick screed bed in CM 1:6 incl demolition of stone slab (Laid bedded and pointed in any cement) etc complete all as specified and as directed

S&F for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 incl demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed complete all as specified and directed.

S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including taking down existing GI/CPVC pipe line etc complete all as specified.

S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S&F in repairs rotational moulded polythene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S&F in repairs rotational moulded polythene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S & F in repairs 25 mm dia bore CPVC ball valve long lever handle (Gate valve) fixed to GI / CPVC pipes line etc complete all as specified and as directed.

S&F in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-syphonage pipe etc complete all as specified and as directed

S&F in repairs EWC (Ivory) with normal closing seat cover of size 540X375X415mm with S Trap incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed (Make Cat no 4018 of Prayag or equivalent make of CA)

S&F in repairs white vitreous china one piece wash basin of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed

S&F in repairs Viterous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl 40 mm dia PVC waste pipe 610 mm long and PVC connection 450 mm long, flush pipe, grating and Union for discharge pipe etc complete all as specified and as directed

S&F in repairs PVC deo flushing cistern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag or equivalent make of CA)

S&F in repairs bib cock with flange fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9206 of Prayag or equivalent make of CA)

S&F in repairs angle cock with flange fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9210 of Prayag or equivalent make of CA)

S&F in repairs Glass Shelf 500 X125 mm with brass bracket etc complete all as specified and as directed (Make Cat no BEA-45 of Prayag or equivalent make of CA)

S&F in repair full corner Glass Shelf (with brass brackets) etc complete all as specified and as directed (Make Cat no BEA-52 of Prayag or equivalent make of CA)

S&F in repairs soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag or equivalent make of CA)

S&F in repairs overhead round rain shower 8" with out armns) of 15 mm bore dia etc complete all as specified and as directed (Make Cat no BOS-41 of Prayag or equivalent make of CA)

S&F in repairs SS Grab bar Towel rail 450 mm long incl fixing arrangement etc complete all as specified and as directed (Make Cat no GM-04 of Prayag or equivalent make of CA)

S&F in repairs stainless steel towel ring incl fixing arrangement etc complete all as specified and as directed (Make Cat no BA-41 of Prayag or equivalent make of CA)

S&F in repairs Hand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed Prayag or equivalent make of CA).

S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S&F 110 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint laid in floor / walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed

S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed

S&F 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane incl hacking out old broken glass (any thickness, size, quality or description) from wooden frames /Steel Frame /Aluminium window /door etc complete all as specified and as directedetc omplete all as specified and as directed Notes : Wks reqed to be carried out up to 6.00 heights. Contractor shall make arrnagement of Scaffolding, saftey measure etc, nothing extra shall be admissible on on this account

S&F in repairs 1.25mm thick rolling shutter gear opeated type with level gear box and crank handle as specified including top cuver, anchoring rod, hasp and staple and one shop coat of primer erected in postion as indicated, complete all as specified and as directed

Repair and servicing of rolling shutters including taking down shutters and refixing in same opening of size exc 5 Sqm N.exc 10Sqm complete duly greasing, oiling, welding as required complete all as specified and directed Notes: Ball bearing, Saftey Lever Lock, hood, anchroing rod and any other accessories reqd to function the shutter inclusive in the rate. Nothing extra shall be admission on this account

S&F in repair Safety lever locks mild steel with 4 levers for rolling shutters etc complete all as specified and as directed

S&F in repair Ball bearing for rolling shutters etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and as directed

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items.

S&F 200mm long aluminium anodised tower bolt of extruded section etc complete all as specified and as directed

S&F 100 mm thick stainless steel butt hinges, medium weight, and fixed etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed '

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed

Removing excavated material exc. 50 m and not exc 250m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 1.0 Km but not exc 1.50Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

SKANDA CONSTRUCTIONS (BID ID -3117842)

MAJ CONSTRUCTIONS (BID ID -3126987)

Janatha Trading Corporation (BID ID -3127333)