8313/E8

Amount

Taking down carefully any type of point wiring (light, fan, bell, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets ,light fittings etc stacking at site for reuse of serviceable items and removal of unserviceable items from site and making good disturbed faces of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed by the Engineer-in-charge.

Material and labour Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 Sqmm size, 1100 volts grade cable confroming to IS drawn through and including PVC casing and caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 Sqmm multistranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light / fan / bell point / 3 pin 5 Amps Socket outlet independent point controlled by one switch single pole one way complete all as specified and as directed.

All as per item No. 2.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switch with casing caping / PVC conduit complete all as specified and directed by Engineer in-charge.

All as per item No. 2.00 here in-before but one light point controlled by two switch two ways complete all as specified and directed by Engineer in-charge.

All as per item No. 2.00 here-in-before but using 2.5 Sqmm size stranded copper conductor cable for one 16 Amp switch socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge.

Material and Labour Concealed Point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core, unsheathed, copper conductor cables drawn through and including PVC conduits Concealed in walls, ceiling etc with all fittings and accessories of PVC conduits 20mm dia, ISI marked, medium grade (like Tee, bend etc.) complete fixed to walls/ceiling etc. with and including 1.5 Sqmm (nominal area) FRLSH PVC insulated, unsheathed, multistranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point and 1.6 mm thick mild steel sunken terminal boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point/ 3 pin 5 Amps normal / modular socket outlet independent point controlled by one, one way normal / modular switches complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by the Engr-in-Charge.

All as per item No. 6.00 here in-before but for one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer in-charge.

All as per item No 6.00 here-in-before but using 2.5 sq mm size FRLS grade stranded copper conductor cable for one 16 Amp normal / modular switch socket outlet on independent board complete all as specified and directed by Engineer-in-Charge.

Supply & fix Switch piano, flush type, SP, one way, 5/6 Amps 230 Volts complete all as specified and as directed.

Supply & fix Bell push, flush type, one way, 5/6 Amps 230 Volts complete all as specified and as directed.

Supply & fix Switch piano, flush type, SP, two way, 5/6 Amps 230 Volts complete all as specified and as directed.

Supply & fix in repairs Switch piano, flush type, SP, one way, 5/6 Amps 230 Volts, including unscrewing the bakelite sheet of switch board and refixing the bakelite sheet after replacing the piano switch complete all as specified and as directed.

Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230 volt flush type complete all as specified and as directed.

Supply and fix in repairs Switch socket combination multipurpose 2 in 1, 5 pin 6 Amps 230 volt flush type including unscrewing the bakelite sheet of switch board and refixing the bakelite sheet after replacing the switch socket combination complete all as specified and as directed.

Supply and fix Socket outlet 5 pin, 6 Amps, 230 volt flush type complete all as specified and as directed.

Supply and fix in repairs Socket outlet 5 pin, 6 Amps, 230 volt flush type including unscrewing the bakelite sheet of switch board and refixing the bakelite sheet after replacing the socket outlet complete all as specified and as directed.

Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 5/15 Amps 230 volt flush type complete all as specified and as directed. .

Supply and fix in repairs Switch socket combination multipurpose 2 in 1, 3 pin 5 & 15 Amps 230 volt flush type including unscrewing the bakelite sheet of switch board and refixing the bakelite sheet after replacing the Switch socket combination complete all as specified and as directed.

Supply and fixing Lamp holder suitable for batten fittings complete all as specified and directed by the Engr-in-Charge.

Supply and fixing in repairs Lamp holder suitable for batten fittings complete all as specified and directed by the Engr-in-Charge.

Supply and fix Ceiling rose surface Bakelite three terminals 230 volts complete all as specified and as directed.

Fixing only old serviceable Ceiling rose obtained from Item No.1 here in before of capacity complete all as specified and as directed.

Supply and fix in repairs Ceiling rose surface Bakelite three terminals 230 volts complete all as specified and as directed.

Supply and fix Call bell ding dong AC 230 volts, single pole complete all as specified and as directed. .

Supply and fix in repairs Call bell ding dong AC 230 volts, single pole complete all as specified and as directed.

Supply & fix Electronics fan regulator, step type, AC 120/280 volt, white/ivory finish complete all as specified and as directed.

Fixing only old serviceable fan regulatore obtained from Item No.1 here oin before complete all as specified and as directed.

Supply & fix in repairs Electronics fan regulator, step type, AC 120/280 volt, white/ivory finish complete all as specified and as directed.

Supply & fix Modular type switch 6 Amps 230V AC single module one way complete all as specified and as directed.

Supply & fix Modular socket outlet 6 Amps 3 Pin shuttered type 230V AC 2 module complete all as specified and as directed.

Supply & fix Modular Switch socket outlet 5 Amps 3 Pin shuttered type 230V AC 2 module complete all as specified and as directed.

Supply & fix Modular Switch socket outlet 5/15 Amps 3 Pin shuttered type 230V AC 2 module complete all as specified and as directed.

Supply & fix Modular bell push, 6/10 Amps 230V AC single module complete all as specified and as directed.

Supply & fix Modular type fan regulator Step type ,100 Watt, one module, 230V AC single module complete all as specified and as directed.

Supply & fix Modular cover plate with frame for fixing of modular switches/sockets complete for 2 modules complete all as specified and as directed.

All as per item No 35.00 here-in-before but for 3 modules.

All as per item No 35.00 here-in-before but for 4 modules.

All as per item No 35.00 here-in-before but for 6 modules.

All as per item No 35.00 here-in-before but for 8 modules.

All as per item No 35.00 here-in-before but for 12 modules.

Supply & fix Sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls for 2 Module complete for modules complete all as specified and as directed.

All as per item No 41.00 here-in-before but for 3 modules.

All as per item No 41.00 here-in-before but for 4 modules.

All as per item No 41.00 here-in-before but for 6 modules.

All as per item No 41.00 here-in-before but for 12 modules.

All as per item No 41.00 here-in-before but for 12 modules.

Supply & fix LED tube light fittings suitable for 1x18/20 watt Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with tube rod including necessary connection complete all as specified and as directed by Engr-in-Charge. Make:-Havells Cat No. LUMLINEPLUSBS20WLED865PCSS or make:- Cromton Cat part No. LDL 20 NW or Philips Cat Part No. BN021 LED 20S PSU CW GR S2 or equivalent model as mentioned in list of makes specified in particular specification.

Supply & fix LED tube light fittings suitable for 1x24/20 watt Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with tube rod including necessary connection including taking down old unserviceable tube light fittings complete all as specified and as directed by Engr-in-Charge. Make:-Havells Cat No. LUMLINEPLUSBS20WLED865PCSS or make:- Cromton Cat part No. LDL 20 NW or Philips Cat Part No. BN021 LED 20S PSU CW GR S2 or equivalent model as mentioned in list of makes specified in particular specification.

Supply & fix LED tube light fittings suitable for 1x10 watt Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with tube rod including necessary connection complete all as specified and as directed by Engr-in-Charge. Make:- Phillips Cat Part No. BN021C LED10S PSW CW GR S2 or Havells Cat No. LUMLINEPLUSBS10WLED865PCSS or make:- Cromton Cat part No. LDL 10 NW or equivalent model as mentioned in list of makes specified in particular specification.

Supply & fix LED tube light fittings suitable for 1x10 watt Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with tube rod including necessary connection including taking down old unserviceable one complete all as specified and as directed by Engr-in-Charge. Make:- Phillips Cat Part No. BN021C LED10S PSW CW GR S2 or Havells Cat No. LUMLINEPLUSBS10WLED865PCSS or make:- Cromton Cat part No. LDL 10 NW or equivalent model as mentioned in list of makes specified in particular specification.

Supply and fixing Recess mounted LED luminaries 36 watt , 2'x2', luminarie and making connection with PVC copper conductor including lamp and all accessories complete all as specified and as directed. Make:- Havells Cat Part No. DROPDOWNFLAT2X2PLR36WLED857S or Make:- Philips RC 380B LED 36S-4000 G4 L60W60 PSD OD WH OC or or equivalent model as mentioned in list of makes specified in particular specification.

Supply and fixing Recess mounted LED luminaries 18 watt , 1'x1', luminarie and making connection with PVC cable of 0.50 sq mm three core sheatered not more than 0.5 meter in length complete all as specified and as directed. Make:- Crompton cat part No. LCTLRNE-18TL or Make:- Bajaj cat Part No. BZRSQL 18W WH or Make:- C&S Cat Part No. CYGNUS-C/18W/1x1/W or equivalent model from make as mentioned in list of make specified in Particular specification.

Supply and fixing Recess mounted LED luminaries 18 watt , 1'x1', luminarie and making connection with PVC cable of 0.50 sq mm three core sheatered not more than 0.5 meter in length complete all as specified and as directed including taking down old unserviceable tube light fittings. Make:- Crompton cat part No. LCTLRNE-18TL or Make:- Bajaj cat Part No. BZRSQL 18W WH or Make:- C&S Cat Part No. CYGNUS-C/18W/1x1/W or equivalent model from make as mentioned in list of make specified in Particular specification.

Supply and fixing Recess mounted LED luminaries 36 watt , 2'x2', luminarie and making connection with PVC cable of 0.50 sq mm three core sheatered not more than 0.5 meter in length complete including taking down old unserviceable one all as specified and as directed. Make:- Havells Cat Part No. DROPDOWNFLAT2X2PLR36WLED857S or Make:- Philips RC 380B LED 36S-4000 G4 L60W60 PSD OD WH OC or or equivalent model as mentioned in list of makes specified in particular specification.

Supply and Fix LED bed side light, energy efficient, 3 Watt, flexible material white complete all as specified and as directed. Make:- Philips cat part No. 48042/30/30 or equivalent model from make:- Bajaj / Havells/Syska/Reshmi/Orient/Century Magik

Supply and Fix LED bed side light, energy efficient, 3 Watt, flexible white complete all as specified and as directed including taking down old unserviceable . Make:- Philips cat part No. 48042/30/30 or equivalent model from make:- Bajaj / Havells/Syska/Reshmi/Orient/Century Magik

Supply and Fix Recess mounted adjustable downlight for accent lighting fittings 10/12 watt white powder coated including all accessories and lamp with necessary connection complete all as specified and as directed . Make:- Havells cat Part No. SPARKLEROADJDLR12W830MOD40D or make:- Surya cat part No. SLE DLR 10W Stellar Pro SQ XX or equivalent model of make:- Bajaj / Havells/Syska/Reshmi/Orient/Century Magik/ Crompton/ Philips

Supply and Fix Recess mounted adjustable downlight for accent lighting fittings 10/12 watt white powder coated including all accessories and lamp with necessary connection complete all as specified and as directed including taking down old unserviceable light fittings . Make:- Havells cat Part No. SPARKLEROADJDLR12W830MOD40D or make:- Surya cat part No. SLE DLR 10W Stellar Pro SQ XX or equivalent model of make:- Bajaj / Havells/Syska/Reshmi/Orient/Century Magik/ Crompton / Philips.

Supply and Fix Building security light die cast housing with individual LEDs with modular secondary optics security light luminaries 30 watt LED with 32mm dia light grade GI pipe bent to shape 45º, 1.5m long and nuts, bolts including fixing arrangement with necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:- HAVELLS Cat part No. ENDURACITYLITEPLATINUMPLUSSL30WLED757SASYBOPC or Make Crompton Cat Part No. LSTS-30-CDL-M or SURYA Cat Part No. SLE UL30W IP66 LXN or Make:- C&S cat part No. LTESS30WLED/LS or equivalemt model from make as specified in Particular specification.

Supply and fix AC starter unit consisting of one 25 Amp capacity starter, one 240 V 20 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired complete all as specified and as directed including taking down old unserviceable starter unit. Make:- Northwest/ Havells/ L&T/Legrand/ Schneider/C&S

Supply and Fix in sheet steel enclosures with two pin and earthed plug and socket complete with and including MCB SP 20 Amps, 240 Volts, heavy duty complete all as specified and as directed including taking down old unserviceable one. Make:- Northwest/ Havells/ L&T/Legrand/ Schneider/C&S

Supply and fix Sheet metal enclosure Metal Door for DB's where MCBs to be used 4 way single pole and neutral with 200 amps rated bus bar including taking down old unserviceable DB complete all as specified and as directed. Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit.

Supply and fix Sheet metal enclosure Metal Door for DB's where MCBs to be used 8 way single pole and neutral with 200 amps rated bus bar including taking down old unserviceable DB complete all as specified and as directed. Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit.

Supply and fixing MCB DB Metal Door TPN 4 way including bus bar neutral link, earth bar and din rail, recessed with wall surfaces and making good surfaces of wall including taking down old unserviceable DB all as specified and directed by the Engr-in-Charge. Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit.

Supply and fixing MCB DB Metal Door TPN 8 way including bus bar neutral link, earth bar and din rail, recessed with wall surfaces and making good surfaces of wall including taking down old unserviceable DB all as specified and directed by the Engr-in-Charge. Note:- (1) Quoted rates are inclusive of taking down DB including MCBs. (2) Found Unserviceable MCBs will be contractor property and will be measured under Schedule of Credit.

Supply and fixing MCCB DB, Vertical TPN, 6 way, metal door, conforms to IS 8623-1&3, IK 09, made of CRCA sheet steel, RAL 9003, powder coated, provided with insulated vertical phase neutral bus bars, with earth bars, sticking saddles with MCCB 160 Amps, 36kA, 3 pole and MCB SP, 6 to 32 amps as outgoing complete including taking out old unservicaeble one complete all as specified and directed by the Engr-in-Charge. Note:- (1) Quoted rates are inclusive of taking down DB including MCCBs. (2) Found Unserviceable MCCBs will be contractor property and will be measured under Schedule of Credit. (3) MCB shall be measured and paid separately under relevant item of this schedule.

Supply and fix MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve braking capacity 10 kA as directed by the Engr-in-Charge.

Supply and fix MCB 63 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge.

Supply and fix in repairs MCB 63 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge.

Supply and fix in repairs MCB 6 to 32 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 KA as directed by the Engr-in-Charge.

Fixing old serviceable MCB of any capacity and any type obtained from taking down of DB complete all as specified and as directed.

Supply and fix isolator 63 Amps, 415 Volts, four pole with rupturing capacity 10 kA complete all as specified and as directed.

Supply and fix in repairs Isolator 63 Amps, 415 Volts, four pole with rupturing capacity 10 kA complete all as specified and as directed.

Materials and labour Sub main wiring with 2 runs of single core PVC insulated FRLS unsheathed stranded copper conductor of size 4 Sqmm and one run of PVC insulated FRLS unsheathed multistrand copper conductor of size 4 Sqmm as earth lead drawn in and including 20mm dia PVC non mettalic rigid conduit, ISI marked including all fittings and taking out old unserviceable sub main wring including PVC casing caping complete all as specified and as directed. Note:- Two runs of 4 Sqmm conductor as main and one run of 4 Sqmm conductor for earthing with one run of PVC conduit shall be measured as one unit.

Materials and labour Sub main wiring with 2 runs of single core PVC insulated unsheathed stranded copper conductor FRLS type of size 6 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor of size 6 Sqmm FRLS type as earth lead drawn in and including PVC conduit, ISI marked not less than 25mm dia after taking out old un serviceable wring including PVC conduit complete all as directed. Note:- Two runs of 6 Sqmm main conductor and one run of 6 Sqmm earthing conductor with one run of PVC conduit shall be measured as one unit.

Removing unserviceable ceiling fan upto 1200/1400 mm sweep from its original position for inspection removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, and capacitor removing burnt out coils from the slots, cleaning and repairing of slots including reassembling and refixing of fan complete including steel clamp with nuts bolt hook for fixing of fan and including 1.5 Mtr length connecting rod and fixing back in position after servicing complete all as specified and as directed. Note:- (i) Spares will be measured and paid separately as "Supply only" under relevant items here-in-after

Removing unserviceable Wal mounted fan up to 400mm sweep from position for inspection removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and repairing of slots complete including reassembling and refixing of fan complete all as specified and as directed. Note:- (i) Spares will be measured and paid separately as "Supply only" under relevant items here-in-after

Materials and Labour Rewinnding of Ceiling fan 1400/1200 mm sweep with super enamelled copeer winding wire of suitable size including varnishing complete all as specified and as directed.

Supply only Ball bearing suitable for ceiling fan upto 1200mm / 1400mm sweep / Wall mounted fan 400mm sweep.

Supply only Capacitor of 2.5 mfd for ceiling fan./ wall mounted fan.

Supply only Gun metal bush of suitable for ceiling fan / wall mounted fan.

Supply only nuts, bolts suitable for ceiling fan / wall mounted fan.

Supply only shaft for ceiling fan 1200/1400mm sweep.

Supply only PVC Connector for ceiling fan 1200/1400mm sweep.

Supply only Fan blade for ceiling fan 1200/1400mm sweep.

Supply and fix 25mm dia, medum grade, ISI marked PVC conduit including all fiitings after taking out old unserviceable PVC conduit with fittings complete all as specified and as directed.

Supply and fix 32mm dia, medum grade, ISI marked PVC conduit including all fiitings after taking out old unserviceable PVC conduit with fittings complete all as specified and as directed.

Material and Labour Painting of ceiling fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc including taking out of ceiling fan and refixing in same position complete all as specified and as directed by Engineer-in-Charge.

Material and Labour Painting of Wall mounted fan fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc including taking out of ceiling fan and refixing in same position complete all as specified and as directed by Engineer-in-Charge.

Removing unserviceable exhaust fan upto 400 mm sweep from position replacement of unserviceable bush and bearing, open the covers for repairs and cleaning and repairing of slots including fixing back in position after servicing complete all as specified and as directed. Note:- Spare parts such as bush bearing and capacitor shall be measured and paid separately under relevant items of this schedule and other spare parts required to replaced shall deemed to be included in the rate quoted against these item.

Materials and Labour Rewinnding of Exhaust fan upto 400 mm sweep with super enamelled copeer winding wire of suitable size including varnishing complete all as specified and as directed.

Material and Labour Painting of Exhaust fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc including taking out of Exhaust fan and refixing in same position complete all as specified and as directed by Engineer-in-Charge.

Supply only Bush suitable for exhaust fan/ wall fan/ pedestal fan of suitable sweep.

Supply only Ball bearing suitable for exhaust fan/ wall fan/ pedestal fan of suitable sweep.

Supply only capacitor 3.15 mfd for exhaust fan of suitable sweep.

Taking down carefully storage type water heater (Geyser ) of any make of capacity 25 Ltrs after removing all electrical and water connection from installed position at different locations,dismantling the geyser into parts for inspection.Checking /testing of all parts/accessories like appratus plate,heating element,thermostat switch,neon lamp, water tank,safety valve, spacer ring, rubber gasket,nut-bolts,inspection plate, bottom& top cover etc. complete,de-scaling of water tank and brazing the same to make it leak proof complete inclduing replacement of unserviceable spare parts and re-installation, making electric and water connections and testing all as specified. Note :- Spare parts shall be measured & paid seperately as "Supply only" Items and make and model of spare parts as per existing make / model and as specified and directed by Engineer-in-Charge.

Material and Labour Painting of Geyser of any size and capacity complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc including taking out of Geyser and refixing in same position complete all as specified and as directed by Engineer-in-Charge.

Material and Labour Brazing / gas welding of inner container copper tank of 25/50 Ltrs capacity and any make and making leak proof complete all as specified and as directed by Engineer-in-Charge.

Supply only Heating element 1.5 KW including rubber washer suitable for existing geyser of capacity 25 Ltrs.

Supply only Heating element 2 KW including rubber washer suitable for existing geyser of capacity 50 Ltrs.

Supply only Apparatus plate (head assembly) complete all as per existing suitable for 25/25 Ltrs geysers of any make complete including rubber packing.

Supply only Thermostat switch suitable for geyser of capacity 25/50 Ltrs.

Supply only Outer casing made out of 2 SWG MS sheet suitable for geyser 25 ltrs capacity.

Supply only Split plate (bottom cover ) made out of 22 gauge MS sheet,white painted suitable for geyser of capacity 25 Ltrs.

Supply only Split plate (top cover ) made out of 22 gauge MS sheet,white painted suitable for geyser of capacity 25 Ltrs.

Supply only fusible metal plug as per existing suitable for 25 Ltrs geyser.

Supply only Insulating materials (Glass wool) suitable for 25 Ltrs geyser.

Supply only Non return valve for gerser inlet complete suitable for existing one.

Supply only Neon Lamp round or square in shape as per existing.

Supply only Element holding brass stud as per existing.

Supply only Element holding brass clamp as per existing.

Supply only Storage tank fabricated from copper sheet gauge suitable for geyser of capacity 25 Ltrs of make as specified and approved.

Supply only Chromium plated Connection pipe, flexible of length not less than 60 Cm complete all as directed by Engineer-in-Charge.

Materials and labour Earthing complete with galvanised steel earth plate electrode 60 Cm x 60 Cm x 6.00 mm thick buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip projected by 15 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 Cm c/c both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I including taking out of old unserviceable earth pit with all accessories complete all as specified and as directed.

Supply and Fix in repairs MS louvers made of 22 guage MS sheet suitable for 300 mm sweep exhaust fan complete with grouting of bolts of suitable size in the wall upto any hight of the building including painting of louvers with two coats of synthetic enamle paint over a coat of red oxide complete all as directed by Engineer-in-Charge.

K.P Construction Co

INDIA ELECTRICAL EQUIPMENTS

SEN ELECTRIC WORKS