Supply and Installation testing and commissioning of machines for 100 TPD capacity MRF centre and Waste Dry and Wet processing plant with operation and maintenance for 10 years for Municipal Corporation Chhindwara

Organic Waste Composed Machine Continuous 02 MT Continuous OWC Machine Capacity : 2 T/hr , main motor : 12.5 HP , MOC : Contact parts: SS 304, shaft seal: Gland type, Outer cover : MS powder coated, Planetary gear box make : Top gear , Electrical control panel

Conveyor belt (In feed to Shredder ) Description INFEED TO SHREDDER 1 Type of conveyor Inclined Flat Fixed Belt Conveyor 2 Material handled Organic Waste 3 Length (m) 5m c/c inclined 4 Belt Speed 21m/min. 5 Type of take-up Screw BELT 600 mm wide, 2.8mm thk PVC polyester solid woven fabric belt. RETURN IDLER Type Single roll flat construction. Roller 42mm OD, with deep groove ball bearings fitted at either ends. GEARED MOTOR 2HP/60RPM (for 2.0TPH) Shaft mounted Worm Gearbox of Bonfiglioli/Transtechno/Eqvt. make coupled to std 3 phase AC motor, 1440 RPM of Hindustan/Marathon make.

Conveyor Belt ( In Feed to OWC) 1 Type of conveyor Inclined Flat Fixed Belt Conveyor 2 Material handled Composite Waste 3 Length (m) 5m c/c inclined 4 Belt Speed 21m/min. 5 Type of take-up Screw 6 BELT 600 mm wide, 2.8mm thk PVC polyester solid woven fabric belt.

Conveyor Belt (out Feed from OWC) 1 Type of conveyor Inclined Flat Fixed Belt Conveyor 2 Material handled Food waste, Cooked Food, Vegetable waste. 3 Bulk density of material 0.7 T/m³ 4 Capacity 2 T/hr. 5 Length (m) 5 m c/c inclined 6 Type of take-up Screw 7 BELT 600 mm wide, 2.8mm thk PVC polyester solid woven fabric belt with lateral UHMW cleats to prevent material slide back.

Screw conveyor for absorbent - OPERATING CONDITIONS AND DATA : Equipment Inclined Tubular Screw Conveyor Material handled Absorbent Capacity required 500 kgs/hr Filling Factor 70% Speed 72 RPM MATERIAL OF CONSTRUCTION Screw flight 3mm thk, MS fabricated continuous helical flights stitch welded to central pipe. Trough Circular trough, 3 mm thk. MS Trough end 10 mm thk MS. Tubular shaft 60.3mm O.D., MS ERW ‘C’ Class pipe. End shaft EN8.

Shredder - Supply – 3ph (415 v/50 Hz) Motor – Qty 1 ( 3Ph, 10HP, 1425 rpm ) Gear Box – Qty 2 Capacity – 2 tons per hour No. of Stages - 1 Overload protection by MPCB/CMR

Raw manure trolley - MS trolley: load caring capacity : 150 kg

Trommel - 01. Feed Conveyor - 12.5 mtrs x 1 mtr 02. Trommel (Sieve size 30mm) -7 mtrs x 1.8 mtr dia 03. Undersize conveyor -12 mtr x 1 mtr 04. Oversize Conveyor - 6 mtr x 1 mtr 05. Air Blower - 3 HP 06. Control panel 07. Structural support for trommel and conveyor

12” PLASTIC SCRAP GRINDER MACHINE - 1. Chamber size 12” width. 2. 12” X 1 No = 12” both side total 2 No fix blade En-31. 3. 06” X 2 No = 12” two side total 4 No rotor blade En -31. 4. Stapes blade type heavy duty rotor. 5. 12mm chamber wall thickness. 6. Heavy duty M.S. casting pedestal & load wheel. 7. 8.5mm.Out put screen hole. 8. Output 40 to 60kg / hr. in sharp blade (depend material). 9. Crompton greaves motor 5 HP.