Annual Rate Contract for the work of Repair and Rewinding of Submersible Pump Sets under PHED Dn Balotra

Repair Rewinding of Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer's specification and to the satisfaction of Engineer Incharge. It includes the replacement of minor parts such as bushes (oil seal bush) Nut Bolts, washers, cable seal, gland ring. vent plug, water drain plug, etc. complete job Up to 3 HP V-6

Above 3HP to 5HP V-6

Above 5HP to 7.5HP V-6

Above 7-5HP to 10HP V-6

Above 10HP to 12.5HP - V-6

Above 10HP to 12.5HP - V-8

Above 12.5 HP to 15 HP - V-6

Above 12.5 HP to 15 HP - V-8

Above 15 HP to 17.5 HP - V-6

Above 15 HP to 17.5 HP - V-8

Above 17.5 HP to 20 HP - V-6

Above 17.5 HP to 20 HP - V-8

Motor opening cable jointing & refitting charges when rewinding is not required . V-6

Providing & Reptacement of G.M./SS Bushes for all types of moters (per set of 4Nos.) including cost of sleeves - V-6

Providing & Replacement of thrust bearing for all types of moter. It includes cost of all componests connected with thrust bearing .- V-6

Replacement of thrust plate for all types of moters - V-6

Supply and fixing spare parts for repair of pump set including cost of opening refitting, servicing, and machining, if required. It also includes the cost of bolt, studs, washer packing, keys etc. complete. Providing & fixing of GM neek rings parts on impeller. Plain Type V-6

Bowel Type V-6

Plain Type V-8

Bowel Type V-8

Providing & fixing of GM/SS bush per piece Plain Type V-6

Bowel Type V-6

Plain Type V-8

Bowel Type V-8

Providing & replacement of G.M.Impeller Plain Type V-6

Bowel Type V-6

Plain Type V-8

Bowel Type V-8

Provising & replacement of Nylon Impeller Plain Type V-6

Bowel Type V-6

Plain Type V-8

Bowel Type V-8

Providing & fixing CI Diffuser/guide vans per piece V-6

providing & fixing Gun metal Diffuser/ guide vans per piece - V-6

providing &fixing Nylon Diffuser/ guide vans per piece - V-6

Providing & fixing Microlone Guide per piece V-6

Providing &fixing of C.I body per piece Plain Type V-6

Bowel Type V-6

Plain Type V-8

Bowel Type V-8

Pump opening & fixing including machining & all finishing work for desired performance Plain Type V-6

Bowel Type V-6

Plain Type V-8

Bowel Type V-8

Bowel Type V-6

Bowel Type V-8

Repair Rewinding of single phase Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer's specification and to the satisfaction of Engineer Incharge. It includes the replacement of bushes (oil seal bush) Nut Bolts, washers, cable seal set, cable gland ring, vent plug, water drain plug, etc complete. up to 2 HP V-4

Above 2HP to 3 HP V-4

Above 3HP to 4 HP V-4

Providing and fixing of spare for single phase submersible moter . Providing & Replacement of G.M/S S. Bushes for all types of motors (per set of 4Nos ) including cost of sleeves

Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing

Replacement of thrust plate for all types of motors

Motor opening cable jointing & relitting charges when rewinding is not required each motor

Proving & fixing of motor pump coupling housing set

Repairing of submersible single phase pump sets Providing & Fixing of GM/SS bush per piece

Providing & fixing GM Diffuser per piece

Providing & fixing Microlone Guide per piece

Providing & fixing of Bowl per piece

Pump opening & fixing including machining & all finishing work for desired performance

Providing & fixing NRV

Providing & fixing D.O.

Providing & fixing of S.S. shaft up to 2 HP

Above 2HP to 4 HP