Construction of School Building as Upgradation of Shri Narshing Inter College ,Mohanpura, Ghazipur, UP

Grand Total 67332533.59

Bill of Quantity (BOQ)

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter College Mohanpura Ghazipur (UP) Under CSR Activity of ONGC

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

(A) Earth Work

1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as

10 sqm on plan) including disposal of excavated earth, lead upto 50m and

lift upto 1.5m, disposed earth to be levelled and neatly dressed.

2 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means in foundation trenches or drains (not exceeding 1.5 m in

width or 10 sqm on plan), including dressing of sides and ramming of bottoms,

lift upto 1.5 m, including getting out the excavated soil and disposal

of surplus excavated soil as directed, within a lead of 50 m.

2.8.1 All kinds of soil. Cum. 155 260.30 40346.50

3 2.25 Filling available excavated earth(excluding rock) in trenches, plinth, sides of

oundations etc. in layers not exceeding 20cm in depth, consolidating each

deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

4 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation /

banking excavated or stacked materials

5 2.27 Supplying and filling in plinth with Jamuna and under floors, including Cum. 350.00 2123.75 743312.50

w tering, a m ng, consolidating and dressing complete.

6 2.34 Supplying chemical emulsion in sealed containers including delivery as

2.34.1 Chlorpyriphos emulsifiable concentrate of 20% Litr 100.00 234.00 23400.00

7 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL

anti-termite treatment (excluding the cost of chemical emulsion) :

2.35.1 Along external wall where the apron is not provided using

chemical emulsion @ 7.5 litres / sqm of the vertical surface of

the substructure to a depth of 300mm including excavation

channel along the wall & rodding etc. complete:

2.35.1.1 With Chlorpyriphos E.C. 20% with 1% Mtr 100.00 38.90 3890.00

8 4.1 Providing and laying in position cement concrete of specified grade excluding the cost

of centering and shuttering - All work up to plinth level :

9 4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone Cum. 160.00 6812.00 1089920.00

aggregate 40 mm nominal size).

10 5.1 Providing and laying in position specified grade of reinforced cement concrete,

excluding the cost of centering, shuttering, finishing and reinforcement - All

work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 Cum. 180.00 9045.75 1628235.00

mm nominal size).

5.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from Cum. 300.00 7878.50 2363550.00

ii natural sources : 4 graded stone aggregate 20 mm

nominal size derived from natural sources)

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

11 5.33 Providing and laying in position machine batched and machine mixed design

mix M-25 grade cement concrete for reinforced cement concrete work, using

cement content as per approved design mix, including pumping of concrete

to site of laying but excluding the cost of centering, shuttering, finishing and

reinforcement, including admixtures in recommended proportions as

per IS: 9103 to accelerate, retard setting of concrete, improve

workability without impairing strength and durability as per

direction of Engineer-in- charge.“(Note :- Cement content considered in this

item is @ 330 kg/cum.“Excess/ less cement used as per design mix is

payable/recoverable separately).

i 5.33.1 All works upto plinth level Cum. 81.68 9504.75 776347.98

ii 5.33.2 All works above plinth level upto floor V level. Cum. 547 9860.40 5393638.80

12 5.35 Add for using extra cement in the items of design mix over and above the Qtl. 150 733.50 110025.00

specified cement content therein.

13 5.22 Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto/above plinth level.

5.22.6 Thermo-Mechanically Treated bars. Kg 130000 107.85 14020500.00

14 5.9 Centering and shuttering including strutting, propping etc. and removal of

(i) 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm. 320 392.15 125488.00

(ii) 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm. 1050 961.30 1009365.00

(iii) 5.9.20 Suspended floors, roofs, landings, balconies and access platform. with water Sqm. 2560 1028.40 2632704.00

proof ply 12 mm thick.

(iv) 5.9.21 Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water Sqm. 2850 841.95 2399557.50

proof ply 12 mm thick.

6.0 BRICK WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class

15 6.1 designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 50.00 7132.25 356612.50

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

16 6.4 in superstructure above plinth level up to floor V level

in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 750.00 9105.95 6829462.50

Half brick masonry with common burnt clay F.P.S.

(non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Cum 32.20 1123.80 36186.36

8.0 MARBLE & GRANITE WORK

Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished) machine

cut for kitchen platforms, vanity counters, window sills , facias and similar locations of

required size of approved shade, colour and texture laid over 20mm thick base cement

18 8.2 mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed

with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing to edge to give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

8.2.2.2 Area of slab over 0.50 sqm SQM 16.00 5136.30 82180.80

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., 0.00

19 8.3 including machine polishing to edge to give high gloss finish etc. complete as per

design approved by Engineer-in-Charge.

8.3.2 Granite work metre 16.00 510.95 8175.20

Extra for fixing marble / granite stone over and above corresponding basic item, in 18719.40

20 8.4 facia and drops of width upto 150mm with epoxy resin baesd adhesive including metre 28.00 668.55

cleaning etc. complete.

Extra for providing opening of required size & shape for wash basins/ kitchen sink in 13701.80

kitchen platform, vanity counters and similar location in marble/Granite/Stone work

including necessary holes for pillar taps etc. including rubbing and polishing of cut

edge etc. complete.

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

22 8.31 Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar Sqm 200.00 978.70 195740.00

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade complete.

9 WOOD & PVC WORKS

9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part

I) non-decorative type, core of block board construction with frame of 1st

24 class hard wood and well matched commercial 3 ply veneering with vertical

grains or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel Sqm 254.00 2392.65 607733.10

butt hinges with necessary screws.

Providing and fixing aluminium extruded section body tubular type universal hydraulic 72753.10

door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight

upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed

adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not

26 9.96 less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or

shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less 0.00

27 9.100 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade,

with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised 0.00

28 9.101 (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 74.00 59.55 4406.70

10.0 STEEL WORK

10.14 Providing and fixing pressed steel door frames conforming to IS:

4351, manufactured from commercial mild steel sheet of 1.60 mm

thickness, including hinges, jamb, lock jamb, bead and if required angle

threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm,

pressed mild steel welded or rigidly fixed together by mechanical means,

including M.S. pressed butt hinges 2.5 mm thick with mortar guards,

lock strikeplate and shock absorbers as specified and applying a coat of

approved steel primer after pre- treatment of the surface as directed by

Engineerin- charge:

10.14.3 Profile E

10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb. Rmt. 405.00 640.20 259281.00

10.16 Steel work in built up tubular (round, square or rectangular hollow tubes

etc.) trusses etc., including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer, including welding and bolted with

special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes. Kg. 7000.00 194.40 1360800.00

10.25 Steel work welded in built up sections/ framed work, including cutting,

31 hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

10.25.1 In stringers, treads, landings etc. of stair cases, including use of Kg. 180.00 123.60 22248.00

chequered plate wherever required, all complete.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar Kg. 2500.00 172.60 431500.00

11.0 FLOORING WORK

11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed

with grey cement slurry mixed with pigment to match the shade of the slab,

including rubbing and polishing complete with base of cement mortar 1 :

4 (1 cement : 4 coarse sand) :

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars Sqm 325 2354.70 765277.50

laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand)

34 and jointed with grey cement slurry mixed with pigment to match the shade

of the slabs, including rubbing and polishing complete.

11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 Sqm 225 1439.4 323865.00

mm or more (thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades, except

35 White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1

Cement : 4 Coarse sand), including pointing the joints with white cement and

matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,

of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick

36 11.46 bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry

@ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments

Size of Tile 600x600 mm

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with

polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I.

limpet washers or with G.I. limpet washers filled with white lead, including a coat of

37 12.1 approved steel primer and two coats of approved paint on overlapping of sheets

complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost

of purlins, rafters and trusses and including cutting to size and shape wherever

12.1.1 1.00mm thick corrugated sheet Sqm 250.00 1457.15 364287.50

13.0 FINISHING WORK

38 13.1 12 mm cement plaster of mix :

13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :

40 13.16 6 mm cement plaster of mix : 0.00

41 13.24 Extra for plastering done on moulding, cornices or architraves including neat 0.00

finish to line and level:

42 13.41 Distempering with oil bound washable distemper of approved brand and

manufacture to give an even shade :

13.41.1 New work (two or more coats) over and including water tinnable priming coat Sqm. 5400 185.65 1002510.00

with cement primer.

43 13.45 Finishing walls with textured exterior paint of required shade :

13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and Sqm. 3900 223.60 872040.00

including priming coat of exterior primer applied @ 2.20kg/10 sqm

44 13.62 Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

13.62.1 Two or more coats on new work over an under coat of suitable shade with Sqm. 150 226.25 33937.50

ordinary paint of approved brand and manufacture.

45 13.80 Providing and applying white cement based putty of average thickness 1 mm, Sqm. 8800.00 156.05 1373240.00

of approved brand and manufacturer, over the plastered wall surface to

prepare the surface even and smooth complete.

46 15.3 Demolishing R.C.C. work manually/ by mechanical means including Cum. 85 3551.25 301856.25

stacking of steel bars and disposal of unserviceable material within 50

metres lead as per direction of Engineer - in- charge.

47 15.7 Demolishing brick work manually/ by mechanical means including stacking

of serviceable material and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-charge.

15.7.3 In cement mortar Cum. 350 851.50 298025.00

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

48 16.3 Supplying and stacking at site.

49 16.68 Providing and laying 60mm thick faciory made cement concrete Sqm 180 972.00 174960.00

interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size, design

& shape, laid in required colour and pattern over and including 50mm

thick compacted bed of coarse sand, filling the joints with line sand

etc. all complete as per the direction of Engineer-in-charge.

21.1.2 For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

50 for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum Kg 350.00 634.45 222057.50

thickness of powder coating 50 micron)

22.7 Providing and laying integral cement based water proofing treatment

51 including preparation of surface as required for treatment of roofs,

balconies, terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with water proofing compound conforming to IS. 2645 and approved

by Engineer-in-charge over the RCC slab including adjoining walls upto

300 mm height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm

to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)

admixed with water proofing compound conforming to IS :2645 and

approved by Engineer- in-charge over 20 mm thick layer of cement mortar of

mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-charge to required

slope and treating similarly the adjoining walls upto 300 mm height

including rounding of junctions of walls and slabs.

(c ) After two days of proper curing applying a second coat of cement slurry using

2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1

cement :4 coarse sand) admixed with water proofing compound

conforming to IS : 2645 2645 and approved by Engineer-in-charge

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1

cement :4 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin- charge

including laying glass fibre cloth of approved quality in top layer of plaster

and finally finishing the surface with trowel with neat cement slurry and

making pattern of 300x300 mm square 3 mm deep.

(e ) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to be

done in order and as directed and specified by the Engineer-in-Charge :

22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 Sqm. 1455 1684.60 2451093.00

Rain Water Harvesting & Tubewells

23.1 Boring/drilling bore well of required dia for casing/ strainer pipe,

by suitable method prescribed in IS: 2800 (part I), including collecting

samples from different strata, preparing and submitting strata chart/

52 bore log, including hire & running charges of all equipments, tools, plants &

machineries required for the job, all complete as per direction of Engineer-in-

charge, upto 90 metre depth below ground level.

23.1.1 All types of soil

23.3 Supplying, assembling, lowering and fixing in vertical position in bore

well, unplasticized PVC medium well casing (CM) pipe of required dia,

53 conforming to IS: 12818, including required hire and labour charges, fittings

& accessories etc. all complete, for all depths, as per direction of

Engineer -in-charge.

23.3.2 200 mm nominal size dia Mtr. 15 1113.35 16700.25

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

23.4 Supplying, assembling, lowering and fixing in vertical position in bore

well unplasticized PVC medium well screen (RMS) pipes with ribs,

54 conforming to IS: 12818, including hire & labour charges, fittings &

accessories etc. all complete, for all depths, as per direction of Engineer-in-

23.4.2 200 mm nominal size dia Mtr 15 1255.70 18835.50

23.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm Cum. 3 1509.80 4529.40

55 to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all

complete as per direction of Engineer-in-charge.

23.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in Cum. 3 1538.25 4614.75

the recharge pit, over the existing layer of boulders, in required thickness, for all

leads & lifts, all complete as per direction of Engineer-in-charge.

23.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 Cum. 3 1538.25 4614.75

mm in recharge pit, in required thickness over gravel layer, for all leads & lifts,

all complete as per direction of Engineer - incharge.

23.8 Gravel packing in tubewell construction in accordance with IS: 4097, Cum. 3 1743.01 5229.03

including providing gravel fine/ medium/ coarse, in required grading & sizes

as per actual requirement, all complete as per direction of Engineer-in-charge.

Total DSR Items 61440326.42

MR Providing and fixing of clear glass of 5.9 mm thick in window panels as per requred size Sqm. 210.00 900.0 189000.00

and patterns with all accessaries of aluminium panels .

Total Non-DSR Items 189000.00

17.0 SANITARY INSTALLATION

17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with

100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern,

including flush pipe, with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and fixtures complete,

including cutting and making good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with Nos. 8 6767.40 54139.20

integral type foot rests.

17.2 Providing and fixing white vitreous china pedestal type water closet (European

type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,

including flush pipe, with manually controlled device (handle lever),

conforming to IS : 7231, with all fittings and fixtures complete,

including cutting and making good the walls and floors wherever required:

17.2.1 W.C. pan with ISI marked wh te solid l s ic seat and lid. Nos. 9 6515.55 58639.95

17.5 Providing and fixing white vitreous china flat back half stall urinal of size

580x380x350 mm with white PVC automatic flushing cistern, with

fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps

62 (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating

and other couplings in C.P. brass, including painting of fittings and

cutting and making good the walls and floors wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Nos. 12 12071.75 144861.00

17.7 Providing and fixing wash basin with C.I. brackets,

15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making good the walls

wherever require:

17.7.5 White Vitreous China Angle back wash basin size 600 x 480 mm with Nos. 17 1916.78 32585.26

single 15 mm C.P. brass pillar tap.

17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass Nos. 17 1607.95 27335.15

(of approved quality) complete with 6 mm thick hard board ground fixed to

wooden cleats with C.P. brass screws and washers complete.

17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length Nos. 17 367.10 6240.70

of tail pipe 260 mm from the centre of the waste coupling, 77 mm

breadth with 25 mm minimum water seal, weighing not less than 263

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm Nos. 17 168.35 2861.95

high and 112 mm distance from wall of standard shape with bracket of the

same materials with snap fittings of approved quality and colour, weighing

not less than 105 gms

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with

67 17.10 C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets,

cutting and making good the walls wherever required :

17.10.1 Kitchen sink with drain board

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste

fittings complete.

17.28.2 Flexible pipe

18.0 WATER SUPPLY

18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.

69 This includes jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of engineer in Charge.Internal

work - Exposed on wall.

i 18.7.3 25 mm nominal outer dia Pipes Rmt. 90 401.55 36139.50

ii 18.7.4 32 mm nominal outer dia Pipes Rmt. 70 518.75 36312.50

iii 18.7.6 50 mm nominal outer dia Pipes Rmt. 60 934.15 56049.00

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This

70 includes jointing of pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.Concealed work, including

cutting chases and making good the walls etc.

i 18.8.1 15 mm nominal outer dia Pipes Rmt. 80 497.8 39824.00

ii 18.8.2 20 mm nominal outer dia Pipes Rmt. 120 537.6 64512.00

iii 18.8.3 25 mm nominal outer dia Pipes Rmt. 90 627.27 56454.30

18.8.4 32 mm nominal outer dia Pipes Rmt. 100 739.3 73930.00

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

approved quality conforming to IS:8931

18.53.1 15 mm nominal bore Each 48 574.30 27566.40

72 18.56 Providing and fixing PTMT pillar cock of approved quality and colour.

18.56.2 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms Each 48 224.10

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and

bush of approved quality and colour.

18.74.2 15 mm nominal bore with 45 cm length Each 24 121.90 2925.60

19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10

74 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes

including bed concrete as per standard design :

i 19.3.4 250 mm diameter S.W. pipe Mtr. 45 1016.90 45760.50

ii 19.3.5 300 mm diameter S.W. pipe Mtr. 35 1173.35 41067.25

19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with

75 collars jointed with stiff mixture of cement mortar in the propo i n f 1:2 (1

cement : 2 fine sand) including test ng of jo n s etc. complete :

76 19.30 Constructing brick masonry chamber for underground C.I. inspection

19.30.1 Inside and bends

dimensions with bricks

455x610 mm andin 45

cm deep 1:4 (1

for single cement

pipe line : : 4 coarse

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation Nos. 15.00 6937.9 104068.50

12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water Rmt. 150.00 377.4 56610.00

pipes conforming to IS : 13592 Type A, including jointing with seal ring

77 conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single

socketed pipes 110 mm diameter

12.42.1.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

78 13592 Type A, including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion. Coupler (110 mm)

12.42.3.2 Single tee with door (110x110x110 mm) Nos. 10.00 234 2340.00

18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage Ltr 10000.00 11 110000.00

tank, ISI : 12701 marked, with cover and suitable locking arrangement

and making necessary holes for inlet, outlet and overflow pipes but without

79 fittings and the base support for tank. Circular tank

Total DSR Items 1149241.71

Supply installation testing commissioning of submersible pump LGP-1235 2HP,3PH

80 MR ,Head Range 17.3 to 35Mtr,Flow range 125 to 25LPM deivery size :32mm with with Nos. 1.00 55000 55000.00

control panel 2HP DOL Digital AMP Volt with all accessaries

Supplying and fixing C.I. cover with frame for manholes : 455x610 mm

rectangular C.I. cover with frame (low duty)

Total Non-DSR Items 77500.00

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed

medium class PVC conduit, with modular switch, modular plate, suitable GI

box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call

bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/ recessed PVC

conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable

etc. as required.

3 Wiring for light/ power plug with 2 x 4 sq.mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium PVC conduit along

1.12 with 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for 500 334.00 167000.00

loop earthing as required.

4 Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper

conductor single core cable in surface/ recessed medium PVC conduit along

1.13 with 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for 250 537.00 134250.00

earthing as required mtr

5 Wiring for circuit/submain wiring along with earth wire with the following sizes of

FRLS PVC insulated copper conductor single core cable in surface/recessed

Medium PVC conduit as

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

Supplying and fixing suitable size GI box with modular plate and cover in front

on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A

modular socket outlet and 15/16 A modular switch, connections etc. as

required.. each

7 Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 3 pin 5/6 A

modular socket outlet and 5/6 A modular switch, connections etc. as required

8 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front

on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular

socket outlet and 2 nos. 5/6 A modular switch, connections etc. as 30 676.00 20280.00

required. (For light plugs to be used in non residential buildings).

9 1.57 Supplying & fixing suitable size GI box wih modular plate and cover in front on

surface or in recess including providing and fixing 25 A modular socket

outlet and 25 A modular SP MCB, "C" curve including connections, 17 727.00 12359.00

painting etc. as

required. Each

12 2.10 Supplying and fixing 5 amps to 32 amps rating 240 volts 'C' curve miniature

circuit breaker suitable for inductive load of following poles in the existing

MCB DB complete with connections , testing and commissioning etc. as

ii 2.10.3 triple pole Each 4 1007.00 4028.00

13 Supplying and fixing of following ways surface/ recess mounting,

vertical type, 415 V, TPN MCB distribution board of sheet steel, dust

protected, duly powder painted, inclusive of 200 A tinned copper bus bar,

2.5.2 common neutral link, earth bar, din bar for mounting MCBs (but without

MCBs and incomer ) as required . (Note : Vertical type MCB

TPDB is normally used where 3 phase outlets are required.

8 way (4 + 24), Double door Each 1 10165.00 10165.00

15 Supplying and fixing following way, horizontal type three pole and neutral,

sheet steel, MCB distribution board, 415 V, on surface/ recess, complete

with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

4 way (4 + 12), Double door Each 12 4091 49092.00

16 2 Supplying and fixing following rating, Four pole, 240 V, MCB in the existing

MCB DB complete with connections, testing and commissioning etc. as

17 Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with tinned copper

bus bar, neutral bus bar, earth bar, din bar, interconnections, powder

painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

2.3.3 12 way , Double door Each 2 2315 4630.00

1.21.1 Supplying and fixing of 20mm medium class PVC conduit along with accessories

in surface/recess including cutting the wall and making good the same in Rmt 1500.00 128.00 192000.00

case of recessed conduit as required

1.25 Supplying and fixing two module stepped type electronic fan regulator on

76 the existing modular plate switch box including connections & modular plate etc. Nos. 170.00 369.00 62730.00

1.26 Supplying and fixing modular blanking plate on the existing modular plate & Nos. 6000.00

switch box excluding modular plate as required.

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

2.18 Supplying and fixing 20 A, 240 V, SPN Industrial type socket

outlet, with 2 pole and earth, metal enclosed plug top

alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on

surface or in recess, with chained metal cover for the socket out

let and complete with connections, testing and commissioning

etc. as required.

7.30 Laying of one number PVC insulated and PVC sheathed / XLPE

power cable of 1.1 KV grade of following size direct in ground

including excavation and refilling the trench etc as required, but

excluding sand cushioning and protective covering.

7.3.2 Above 35 sq. mm and upto 95 sq. mm Mtr 350.00 217.00 75950.00

7.3.3 Above 95 sq. mm and upto 185 sq. mm Mtr 100.00 234.0 23400.00

9.1 Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated

and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

1.49 Installation of exhaust fan in the existing opening, including making good the 1200 6000.00

damage, connection, testing, commissioning etc. as required

Total DSR Items 2355313.00

19 MR SITC of 400mm sweep wall fan complete with all respects, i/c connection with

1.5 sq.mm. FRLS PVC insulated single core copper conductor cable i/c 10.00 2100 21000.00

providing suitable clamp for hanging in wall etc. complete as required. Each

10 MR Supplying, Installation , Testing and Commissiong of 20W LED Batten fitting 4

feet long including connection with 1.5 sq.mm FRLS PVC insulated copper 300.00 520 156000.00

conductor and earthing Each

SITC as required. mounted 42W LED luminaire of size 600mm x

of recessed/surface

11 MR 600mm with CRCA powder coated body & high efficiency diffuser to provide 30.00 2500 75000.00

soft glare free light i/c connection with 1.5 sq.mm. FRLS PVC insulated single Each

copperof conductor

AC 1200mm Sweep,

cable 230/250 as

etc. complete Volts, 50 Hz ceillling fan without

required. 270000.00

83 regulator, standar down rod, blades etc. complete as required. Nos. 150.00 1800

MR Supply laying and termination of 3.5C x 150 sq mm aluminium armoured (1100

Volts) XLPE insulated cable. Mtr 100.00 1600 160000.00

MR Supply laying and termination of 3.5C x 95 sq mm aluminium armoured (1100

Volts) XLPE insulated cable.

MR Distribution Panel: Incoming Side: 200A 4P

MCCB (BC-36 KA) - 1 nos, Metering with flush

mounted CT operated VAF Meter class one -1Sets.

BUSBAR - 250A Copper busbar (1.4 Amp /sq mm)

with suitable size heat srinkable sleev &

insulator.Outgoing Side: 63A 4P MCCB (25 KA)

with both side Spreader -6 nos, 40A TPN MCB

(10KA) - 3 nos & 32A TPN MCB (10KA) -

3Nos.Fabrication will be 16 SWG CR sheet with

poweder coating paint.

Total Non-DSR items

DSR-2022 FIRE FIGHTING WORK

Supplying, installation, testing and commissioning of electric driven terrace

pump suitable for automatic operation and consisting of following, complete in

18.4 all respects, as required: (Terrace Pump)

Horizontal type, multistage, centrifugal pump of cast of iron body and bronze

impeller with stainless steel shaft, mechanical seal conforming to IS 1520.

Suitable HP squirell cage induction motor TEFC type suitable for operation on

415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for

enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to

M.S fabricated, common base plate, coupling, coupling guard, foundation bolts

etc. as required.

Suitable cement concrete foundation duly plastered and with anti vibration pads.

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

Providing & fixing of pressure switch in M.S. pipe line including connection etc.

6 18.20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet,

1200 mm in height with air release valve on top and flanged connection to riser,

drain arrangement with 25 mm dia gun metal wheel valve with required

accessories, pressure gauge and paintingwith synthetic enamel paint of

approved shade as required. Each 1 18,244.00 18,244.00

Providing, installation, testing and commissioning of stainless steel Ystrainer

fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia

17 18.15 holes with stainless steel flange.

Providing, installation, testing and commissioning of non-return valve of

following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts,

18 18.14 nuts, washers etc.as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating

with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers,

19 18.11 gaskets conforming to IS 13095 of following sizes as required :

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe

conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees,

flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or more coats of

synthetic enamel paint of required shade complete as required : (Above

2 18.7 Ground)

Threaded joint upto 50mm diameter pipe.

Welded joint above 50mm diameter pipe.

c 7.8 150 mm nominal bore (class C) Rm 5 3,574.00 17,870.00

d 7.7 100 mm nominal bore (class C) Rm 40 2,555.00 102,200.00

e 7.6 80 mm nominal bore (class C) Rm 23 1,885.00 43,355.00

g 7.4 50 mm nominal bore (class C) Rm 7 1,281.00 8,967.00

J 7.1 25 mm nominal bore (class C) Rm 28 744.00 20,832.00

2 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including

accessories, and providing masonry enclosure with cover plate having locking

ELECT. arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and

DSR salt as required.

3 5.11 Supplying and laying 25 mm x 5 mm. G.I. strip in 40 mm dia. G.I. Pipe from

earth electrode, including connection with GI nut, bolt, spring, washer

excavation and re-filling etc as required.

4 5.15 Providing & fixing 25mm x 5mm G.I. strip on surface or in recess for

connections etc. as required.

5 5.18 Providing and Fixing 6 SWG dia G.I. wire on surface or in recess for loop

earthing alongwith existing surface/ recessed conduit/ submain wiring/ cable as

Supplying, fabricating and installing following size of perforated painted with

powder coating M.S. cable trays,with perforation not more than 17.5%, in

covenient section, joined with connectors, suspended from the ceiling with MS

suspenders including bolts & nuts, painting suspenders etc. as required.

4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness Rm 15 543.00 8,145.00

4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Rm 10 777.00 7,770.00

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE

7.7 power cable of 1.1 KV grade of following size on wall surface as required.

7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle) RM 6 55.00 330.00

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat

Supplying of all materials and making terminations of 1.1 KV grade aluminium

multicore cables of the following sizes. The work includes cable glanding using

brass plated double compression glands, sizing the core leads, removing

insulation, fixing suitable crimping type copper lugs/ thimbles by using hydraulic

crimping tools with correct size of the dies, shaping the leads and neatly

connecting the same to the equipment terminals.

b 9.1.21 3.5 Core 35 sq. mm. Armoured Aluminium cable. Mtr 15 369.00 5,535.00

c 9.1.8 3.5 Core 16 sq. mm. Armoured Aluminium cable. Mtr 5 270.00 1,350.00

Supplying and drawing following sizes of FRLS PVC insulated copper

conductor, single core cable in the existing surface/ recessed steel/ PVC

9 1.17 conduit as required.

Total DSR Items 510,710.00

Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded

M.S. cylindrical body, internal discharge tube, discharge nozzle, suspension

bracket, conforming to IS 2878, finished externally with red enamel paint and

1 M.R. fixed to wall with brackets complete with internal charges.

Providing & Fixing of stored pressure Fire Extinguisher ABC powder type (Mono

Ammonium Phosphate Powder) Magnetic Pressure Gauge having the facility to

check at site, Discharge Time less than 9 Secs, Controllable discharge

mechanism, Range minimum 4 Meters, applicable on Class A,B,C and

electrically started Fire, A Rating- 21A, B Rating 55B as per BS EN-3 BIS 15683

marked, Can Construction : Deep drawn & CO2 Mig welded, Valve

Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder

coating, External Coating ofCan : Epoxy Polyster Powder coating, Sheet metal

2 M.R. thickness : 1.60MM, Helium LeakDetection Tested, Warranty.

Providing and fixing angle iron (40 mm x 40 mm x 5 mm) MS door frame

900x2100 door capable of accommodating fire hose reel, landing valve, hose

pipes, fittings & accessories. The door shall have a front glass with lock and key

arrangement & shall be painted with post office red colour (approval shall be

taken on the basis of submitted sample before ordering) Cost of fire

extinguishers not included in item rate. (Liasioing with civil contractor for making

900x600x2100 Recessed type mansoary box (by civil contractor).

8 M.R. Providing and fixing of Fire Axe Each 5 658.89 3,294.44

ROOF FIRE PANELS:

11 Supply, installation, testing and commissioning of followingintegrated, cubicle

type,dead front, extensible, sheet steel control panel. The panel shall be

M.R. suitable for 440 volts, 50 cycles, 4 wire supply Item 1 57,123.83 57,123.83

The following components and accessories shall be mounted with ineach

One no 100 amps TP incoming MCCB with the following:

0-500 volts 96 x96 square mm voltmeter with slector switch and control fuses-

0-100 amps 96 x96 square mm ammeter with CT's and slector switch- 1 SET

Phase indicating lamp with toggle switches.

Indication lamps for ON/OFF/TRIP status

Outgoing Feeders / Starters as below:

KUMAR CHAUDHARY

BOQ - CIVIL. WORKS

Sl. No. DSR-2023 DESCRIPTION UNIT QTY. DSR RATE DSR Amount

100 ATP MCCB with star / delta as starter suitable for 30 HP motor for

Downcomer Pump - 1 Set

Provision in control panel to connect flow switch for autmatic operation of roof

Total Non-DSR 178,442.46

KUMAR CHAUDHARY