REPAIR TO CERTAIN PUMP HOUSE, SUB STATION, OVERHEAD TANKS AND CONNECTED MISC WORKS FOR E/M INSTALLATIONS UNDER GE KAMPTEE

Amount

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for colour glazed ceramic tiles 450x300x7mm thick in vertical surfaces such as skirting, dado and risers to steps, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 for receiving wall tiles complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-22 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over screed bed or bedding layer of 20mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for kota stone slab 15-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 10mm thick rendering in cement mortar 1:4, on fair faces of brick work or concrete surfaces as backing complete all as specified and directed.

Taking down steel tubing and connections of 15mm bore complete all as specified and directed.

Taking down steel tubing and connections of 20mm bore complete all as specified and directed.

Taking down steel tubing and connections of 25mm bore complete all as specified and directed.

S&F 15mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 25mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling water tanks and removing to store exc. 250 ltrs & not exc 1000 ltrs complete all as specified and directed.

Supply, Hoist and fix in position rotational molded polyethylene water storage tanks (cylindrical with closed top) of capacity 500 ltrs complete all as specified and directed.

S&F in repair 20mm PTMT float valve, high pressure with polythene float and flynut complete, screwed for iron pipe etc complete all as specified and directed.

S&F in repairs vitreous china W.H.B. white, flat back of size 550 x 400mm, including PVC waste pipe and brackets or wall hung, fixed with bolts etc complete all as specified and directed.

S&F in repair PVC 10 litres capacity valveless, syphonic action type low level flushing cistern, white including flush pipe, cantilever brackets, inlet, ball valve, float and handle, PVC connection of 15mm dia etc complete all as specified and directed.

S&F EWC vitreous china wash down water closet (pedestal pattern) white with integral foot rests with 'P' or 'S' trap including provn of lime concrete or bedding complete all as specified and directed.

S&F plastic water closet seat white, closed pattern with flat bottom, cover and mild steel C.P or aluminium hinging device complete all as specified and directed.

S&F in repair vitreous china squating pan WC Orissa pattern, white, size 580 x 440mm with integral foot rests with ‘P’ or ‘S’ trap including provn of lime concrete bedding complete all as specified and directed.

S&F in repairs vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

All as per item No 24 above above but half stall urinal complete all as specified and directed.

S&F urinal spreader of PTMT, any colour for fixing with 15mm dia pipe (Minimum weight 60 gms) complete all as specified and directed.

S&F grating doom of 125mm dia of PTMT (Minimum weight 40 gms) with waste hole complete all as specified and directed.

S&F in repair 15mm bore bib tap, cast copper alloy with crutch or butterfly handles, screwed down for iron pipes or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, complete all as specified and directed.

S&F in repair 15mm bore angle stop valve, fancy type, chromium plated, cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F PVC connection of 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

S&F steel windows with side hung shutters, factory made including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters factory made, including box type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator, factory made with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F framed work such as grills, etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars and similar work conforming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm in width or girth complete all as specified and directed.

S&F in repair stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples, beads or in steel window complete all as specified and directed.

M&L for second class hardwood (SAL) plain, solid, straight chowkat and frame, wrought, framed, rebated on the solid rounded chamfered put together with glue, pinned at joint complete all as specified and directed.

M&L for factory made, 2nd class hard wood, 35mm thick, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board, medium density wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

M&L for factory made, 30mm thick second class hard wood glazed and skelton shutters with sash bars, open rebated & prepared to receive glass/ wire mesh as specified in SSR Part-I section 8, clause 8.24 (b) complete all as specified and directed.

M&L for two coats of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed.

S&F 100mm long mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black with bright bolt complete all as specified and directed.

S&F 150mm long mild steel barrel tower bolts, stove enamelled black with bright bolt complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed.

S&F factory made solid panel PVC door shutters, 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with neat molded plain cover PVC. 'C' channel having a PVC sheet strip of 20mm width stuck inside with cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, planning of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet veading and jointed together with solvent cement etc complete all as specified and directed.

S&F 100mm long aluminium alloy type C-22 butt hinges with galvanised MS hinge pin etc complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12mm dia fixed complete all as specified and directed.

S&F 150mm long aluminium anodised handle, cast type and fixed complete all as specified and directed.

Demolition of unreinforced cement concrete in floors and pavings not exc 15cm thickness below or above ground level, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in PCC path and similar works complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in hard standing and similar works, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mist filling in the joint complete all as specified and directed.

Forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound of grade 'B' complete all as specified and directed.

Forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved on plan to any redius built in half brick thick wall built in CM 1:4 (Using old size brick) complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished fair and even complete all as specified and directed.

M&L for prepairing new plastered or unplastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block, any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 grade, rubber moulded, finished with coloured rubber finish on top & over sand dust cushion of 40mm thick complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

M&L for chequred tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

Dismantling post or strut embeded in concrete (wood/ steel/ RCC) any section embeded in concrete including taking out embeded portion and making good complete all as specified and directed.

Dismantling old structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

M&L for MS bars 10mm dia & over (TMT Bars) cut to length bent to shape as required including cranking, binding spirally for hooping cols, hooking ends and binding with and including mild steel wire annealled not less than 0.90mm dia or securing with clips complete all as specified and directed.

S&F in repair galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rail straining bolt including securing or tying at crossing with & provision of galvanised steel wire staple or steel pins (each line to be measured) complete all as specified and directed.

Dismantling fencing / wire mesh of any description complete all as specified and directed.

Supply only galvanised chain link fencing of 3.40mm dia & 100x100 mesh including line wires, weight not exc 4.00 Kg/ Sqm complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

M&L for mild steel as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) hanging; also fastening and fixing complete conforming to Fe 410-W(Gde-E- 250) quality A complete all as specified and directed.

S&F mild steel screw bolt 10mm dia (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut not exc 5cm long complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for preperation of old decorated surfaces and applying one coat of cement base paint on wall etc complete all as specified and directed.

M&L for preperation of old wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

M&L for preparation of old decorated surfaces and applying two coats of exterior grade weather proof paint, water based on wall surfaces over two coats of primer (rate up to 25m high including scafolding) complete all as specified and directed.

M&L for brooming down surfaces of any description and applying one coat of white wash on old decorated surfaces of walls including preparation of old surfaces & filling cracks and holes etc complete all as specified and directed.

All as per item No 89 above but two coats of white wash complete all as specified and directed.

All as per item No 89 above but on ceiling complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundations including rafts, footings, foundation ms; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for formwork to sides and soffits of plinth beam, sides of footings, bass of columns and similar work with rough finished surfaces etc complete all as specified and directed.

M&L for formwork to sides of columns and similar work with rough finished surfaces etc complete all as specified and directed.

Taking down cement plaster etc. on brick/ RCC wall or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for over head water tank RCC wall injection grouting providing and grouting at construction joint cementitious nozzles by injecting cement slurry mixed with grout admixture Cebex 100 @ 225 gms per bag of cement, in the required consistency through the pre fixed PVC/ Aluminium/ GI nozzles in the 18mm dia holes at 60cm c/c, fixing of nozzles with Renderoc Plug and final cutting the projected nozzles and sealing off the nozzles after the injection operation is over with Renderoc plug etc. at regular intervals as per the requirements complete all as specified and directed. Make:- FOSROC or equivalent. Note:- Work should be carried out through authorised applicator of the company as approved by GE.

M&L for over head water tank RCC wall structural cracks (more than 1mm) injection grouting – epoxy providing and executing injection/ pressure grouting in cracks in the parent concrete by fixing PVC nipples at 150mm to 200mm distance or specified distances as per design and detailed specifications. Pressure grouting using low viscous epoxy grout Conbextra EP 10(M) of Fosroc or equivalent having mix density 1060 kg/m3,Compressive Strength (ASTM D695)- 60 N/mm2,Tensile Strength (ASTM C 304-97)-20 N/mm2, Flexural strength (BS 6319 Part 4)- 45 N/mm2. Pressure grouting shall be done at required pressure etc complete as directed by EIC. Payment shall be made on actual grout consumed complete all as specified and directed. Make:- FOSROC or equivalent. Note:- Work should be carried out through authorised applicator of the company as approved by GE.

M&L for over head water tank RCC internal wall waterproofing coating 2mm thick, cleaning the internal surface areas thoroughly so that they are free of all contamination like dirt and laitance & to remove all the loose material by various mechanical means. Removing all surface imperfection, protrusions, loose concrete & filling of cracks using SBR latex Nitobond SBR latex modified mortar in the ratio of cement sand (1:4) and 5% by weight of cement. Fillets at the junction of the walls and the slabs using cement mortar at 1:4 mix admixed with 5% of SBR latex Nitobond SBR latex by weight of cement. Applying 2 coats of 2 component, prepacked, polymer modified cementitious coating of tensile strength of 5 N/mm2 as per D412, Elongation 120% as per ASTM D 412, crack bridging of 2mm as per ASTM C 836, applied @ 3kg/Sqm, coving at junction of wall and slab using polymer modified mortar and brush application of Nitocote CM210- High performance elastomeric cementitious waterproofing system in two coats as per manufacturer’s specification. Sprinkle sieved coarse sand on wet surface of final coating for better adhesion of plaster or screed. Allow the coating to dry before covering with screed complete all as specified and directed. Make:- FOSROC or equivalent. Note:- Work should be carried out through authorised applicator of the company as approved by GE.

M&L for over head water tank RCC internal wall plaster applying plaster of average 15mm thickness admixed with Conplast WL - Integral Waterproofing liquid admixture as per IS 2645 at a dosage of 125 ml per 50 kg cement, cement sand mortar (1:4) complete all as specified and directed. Make:- FOSROC or equivalent. Note:- Work should be carried out through authorised applicator of the company as approved by GE.

M&L for providing and applying two coats of Nitocote EP 405- Solvent free epoxy resin coating as per CFTRI 21 CFR 175 – 300 of US – FDA, Water absorption nit as per ASTM C870:90 over plastered surface after proper surface preparation, mixing base and hardener of Nitocote EP 405 using mechanical drill and paddle and apply the same in 2 coats using suitable brush or roller etc.complete including all tools and tackles as per manufacturer’s specification complete all as specified and directed. Make:- FOSROC or equivalent. Note:- Work should be carried out through authorised applicator of the company as approved by GE.

M&L for preparation of new or previously untreated surfaces of steel and iron of any description not exc 10cm width or girth not when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.28,400.00]

M/s B S Jain

Meet Road Lines

DE PRETTY AND CO

Vishwakarma Engineering Works

M/s M.G. Hargunani

Devika Constructions

khushal constructions

Bidder Name

Meet Road Lines

DE PRETTY AND CO

Vishwakarma Engineering Works

M/s T.S.JOHAR

khushal constructions

M/s B S Jain

Devika Constructions

M/s M.G. Hargunani