MLA Fund -2025-26-Construction of Public Distribution Shop at Ward No.17 Gnanammankovil Street in Uthamapalayam Town Panchayat

Amount

Earthwork excavation and depositing on bank with an initial lift of 2M in light black cotton soil. Hard stiff day. Stiff black cotton. Hard red earth, shales, muram, gravel stoney earth etc. as per SS 20B ( TNBP SS No.23 & 24)

Cement concrete 1:4:8 mix (one cement four sand Eight hard bracken stone) using 40mm ISS gauge hand bracken granite stone jelly for foundation including watering wherever necessary and laid in layer not ore than 15mm thick Compacting etc. complete complying with standard Specification and as directed.

Supply and filling in basement with Well Gravel well rammed watered and consolidated complying with standard specification.

Supplying and erecting for sides and soffits including supports and strutting up to 3.29m height for plan surface in all floors with all cross bracing using mild steel sheets of size 90cm and 10 gauge stiffened. Welded with mild steel angels of size 25mm x25mm x3mm for boarding laid over silver oak (country wood) joist of size 10cm centre and supported by casuarinas props of 10cm to 13 cm Dias paced at 74cm center to center etc. complete complying with standard Specification and as directed for the following items.

Square column

Grade Beam

Plain surface

Supplying and Fabrication and placing in position mild steel or ribbed or steel for all reinforced cement concrete works as per the design given including cost of Steel and binding wire in all floors etc. complete complying with standard Specification (Ms RTS bars will be supplied departmentally at section stores and cost will be recovered at issue rate) the binding wire shall be supplied by the contractor.

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Finishing the top roof with one course machine pressed tiles of size 20cm x 20cm x 2cm x of approved quality laid in cement mortar 1:3 ( one cement and three sand) 12mm thick mixed with water proofing compound confirming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar. Red oxide etc. complete complying with standard Specification.

Supply & Fixing of steel door window & other items including cost of material and other labour charges but excluding conveyance from go down and fixing charges as per standard specification.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc

celling plastering in cm 1:3 10mm thick including cost and conveyance of all materials to site and all other labour charges including curing etc. as per standard specification.

Plastering with Cement Mortar 1;5 mix to 12mm thick in all floors including curing etc. complete complying with standard Specification and as directed.

Providing Granolythic floor finish of the 25mm thick including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification.

Emulsion Painting two coats with approved colour including cost and conveyance of all materials to site and all labour charges etc, complete

Painting in two coats of new iron work over Priming coat including cost and conveyance of all materials and all labour charges etc. ( Complete (for structural steel work)

Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.

Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete

Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil)

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains

Supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL

P.Sumalatha (BID ID -1349399)