Annual Rate Contract for Fabrication Work under Sub Div Gida

5.1.1 Turning of various sizes of CID Joints Class- 10 15 Complete set (Labour Charges). The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, fimm is liable to transport upto Junior Engineer concem's store own his cost 80 mm

100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

5.2.1Threading on Gt Pipes different diameter as below (Rato Per Mouth Threading) The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes firm is able to transport upita Junior Engineer concern's store own his cost 32 MM

5.4.1 Welding on MS/G1/CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machinal /generater, if required for job At Workshop

On Site

5.5 Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs. Tall Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer-In Charge complete in all respect .

5.6 Making Hole (only labour charges) by drill machine in MS/ CU/ DI Pipes and Specials per hole rate Up to 12 mm dia.Hole

Above to 12 mm dia.Hole

5.7 Making of GI Assembly pipe for vanous sizes including threading, tightening, welding of lange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M 6.00 M (Pipse and flangse shall be provided and carting these to workshop by the the department) Length of MS strip will be 100 mm, Width-20 mm and thickness- 6 mm and to be weided around the strip with pipe and flange Holes in the flanged will be standard size and above 12 mm dia, in size After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect After preparing of Assembly Pipes, the firm is liable to transport these to concem's divisional store own his cost 50 MM

5.8 Supplying and foong of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including matenal and finishing for the following sizes Sluice Valve Size 80 mm

Sluice Valve Size 100 mm

Sluice Valve Size 125 mm

Sluice Valve Size 150 mm

Sluice Valve Size 200 mm

Sluice Valve Size 250 mm

Sluice Valve Size 300 mm

Sluice Valve Size 350 mm

Sluice Valve Size 400 mm

5.9 Supplying of Chuck Nut for different sizes of suce valve and should be supplied as according to size of Check Nut including material for the following sizes. Sluice Valve Size 80 mm

Sluice Valve Size 100 mm

Sluice Valve Size 125 mm

Sluice Valve Size 150 mm

Sluice Valve Size 200 mm

Sluice Valve Size 250 mm

Sluice Valve Size 300 mm

Sluice Valve Size 350 mm

Sluice Valve Size 400 mm

5.10 Providing of U Plain (U Stand) for different sizes of sluice valve and should be suppled as according to size of old U Plate including material for the following sizes Sluice Valve Size 80 mm

Sluice Valve Size 100 mm

Sluice Valve Size 125 mm

Sluice Valve Size 150 mm

Sluice Valve Size 200 mm

Sluice Valve Size 250 mm

Sluice Valve Size 300 mm

5.11 Supplying of MS Rods and Chuck Nut (Complete Set) for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. Sluice Valve Size 80 mm

Sluice Valve Size 100 mm

Sluice Valve Size 125 mm

Sluice Valve Size 150 mm

Sluice Valve Size 200 mm

Sluice Valve Size 250 mm

Sluice Valve Size 300 mm

Sluice Valve Size 350 mm

Sluice Valve Size 400 mm

5.12 Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length 100 mm Width 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flangod, welding will be done at junctin of flange and pipe complete in all respect including cost of material The length of Direct Pump Piece wa be 30 cm (300 mm) 2' dia. Size (50 mm)

2 1/2 dia. Size (65 mm)

3" dia. Size (80 mm)

4'' dia. Size (100 mm)

5.13 Making Reducer Pump Piece with heavy duty pipes (Class- B and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length 100 mm, Width-20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged Hole in the flange will be standard size and above 15 mm dia in size. After tightening the pipe and flanged, weiding will be done at Junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller ppe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm) 2x2 “ dia size (50 x 65 mm)

2 “x 3” dia size (65 x 80 mm)

2'x 3° dia size (50 x 60 mm)

3x 4' dia size (80 x 100 mm)

Please Enable Macros to View BoQ information