Krishnagiri Dt Mathur Block Mines and Minerals 2025-26 1 work of Providing Cupboard with UPVC partitions and Main Gate to union office Building Ground Floor at Mathur Block Package No 2025-26 MTR 25

1. Providing Cupboard with UPVC partitions and Main Gate to union office Building Ground Floor at Mathur Block. Estimate Cost (43,27,000.00)

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Cement concrete 1:4:8 Using 40mm ISS size Hand Broken granite stone Jelly for Foundation and Flooring including labour charges for mixing concrete watering and laying the concrete in layers .

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slab

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction.

Plastering with Cement Mortar 1:5 (One cement and Five P.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work

Providing and fixing GYP board false ceiling and fixing with a new Gyp board False ceiling which includes 'U' shaped GI channels of size 25x25x0.5mm thick

The supply and installation of UPVC partitions with doors shall utilize UPVC profile sections with an outer wall thickness of 2.30mm ($0.2mm), featuring an outer frame of 74mm x 60mm x 56mm, a shutter of 104mm x 60mm x 66mm, a mullion of 72mm x 60mm x 36mm, a glazing bead of 35mm x 18mm, a 20mm multi-chambered hollow uPVC panel section of 150mm x 20mm, and a uPVC panel bead of 19mm x 16mm. Al profiles of frames, sash, and mullion shall be reinforced, where required, with 1mm thick GI steel sections.The door will be equipped with 3D hinges for enhanced weight holding capacity, and security devices such as multipoint lock systems with a cylinder lock facilitate d handle, all compliant with relevant specifications and departmental directives . GlazingoUPVC panels shall be 5 m m thick Plain Toughened o r uPVC panel grip, held by TPE (Grey) weather-sealed gaskets. All corners and mullion joints of the frame and sash shall be mitred cut and fusion weld ed with out mechanical joints , with all welded joints neatly trimmed to a grooved nib finish,the complete units shal be fixed into pre-finished penies.by drilling and fastening through the outer frame using high- quality fasteners, and silicon sealant shall be applied to fillthe gap between the wall and the frame for a leak- proofinstallation and completion etc., Complete and as directedby the department officers. SOR 2025-26

Supplying and fixing of Steel Gate Size of following including all cost and Labour Charges Completed

Supplying and fixing of Compound Wall Grill Size of following including all cost and Labour Charges Completed

Provision for writing Name board

Provision for Photographics charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information