PROVN OF HARD STANDING FOR A VEH AND MISC SANCTIONED WORK AT MAMUN CANTT UNDER GE (SOUTH) MAMUN

Amount

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

Returning filling in including spreading, leveling and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed.

Removing surplus excavated material to a distance exceeding 50 mtrs and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 complete all as specifiedand directed.

M&L for rendering 12 mm thick plaster in cement mortar 1:4, on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in lintles upto 1.5 m clear span, cill, steps, sesmic and other similar bands, plinth courses, string courses, lacing courses, parapet and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water thoughs, and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement comcrete1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) using extra cement, including forms moulds, mitred/stopped ends etc. complete all as specified and directed.

Supply laying and jointing reinforced concrete pipes of bore 600 mm class NP2, laid and jointed complete with collars laid in trenches in concrete padding jointing in cement mortar 1:3 complete all as specified and directed.

Surface excavation, n exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Removing surplus excavated material to a distance exceeding 250 mtrs but not exc. 500 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for hard core of broken boulders, gauge n exc 63 mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base surfaces finished even and rough to receive top floor finish complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size as approved having high glossy finish confirming to IS 15658-2006 of 100 mm thickness, epoxy coated, M-50 Grade, laid dry over sand cushion complete all as specified and directed. Note :- The sand shall be measured and paid separately.

M&L for dry clean fine river sand as in sand cushioning under floors including watering, consolidation& compaction using plate vibrator complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) rounded or chamfered on edges or in coping etc. complete all as specified and directed.

Supply, installation, commissioning and testing of PLC based 240 vac 1P2W water level controller system for over head tank for the water supply system to send the wireless data information to the main panel from master panel with help of sensing the water level-6 different level through sencer in the over head tank. The controller PLC shall comply CE,IEC 61131-2 and UL 508, CSA 22.2 for industrial control Equipment. The main control panel shall be wall / floor mounting and shall be of suitable size made of 2 mm CRCA sheet, powder coated complete all as specified and directed.

Supply, installation, commissioning and testing of PLC based 240 vac 1P2W supply system for master panel for monitoring of water level in the tank and display the visual information on panel. The system shall be capable to receive the wireless data. Panel shall be protected with over / under voltage (OV/UV) short circuit (SC), over load (OL), phase indicator - 1SET, alarm on tank empty and tank full. The panel shall be wall / floor mounting and shall be of suitable size made of 2 mm CRCA sheet, powder coated. The controller PLC shall comply CE, IEC 61131-2 and UL 508, CSA 22.2 for industrial control Equipment. The programming language of controller shall compy IEC 61131-3. The program should be downloaded, complete all as specified and directed.

S&F on wall / laying in ground 1.5 Sqmm 8 core PVC insulated& PVC copper armoured cablke with heavy duty PVC saddle 60 cm apart, complete all as specified and directed.

VIJAY KUMAR LAKHNI (BID ID -3171958)

M/s GIrdhari Lal Rakesh Kumar (BID ID -3166323)