REPAIR AND MAINT OF SPLIT/WINDOW AC, DESERT COOLER, WATER COOLER, REFRIGERATOR, DEEP FREEZER, GEYSER, SOLAR WATER HEATER AND MISC WORK UNDER GE (EAST) AGRA

Amount

M&L for servicing of both (indoor & outdoor) unit of split type ACs of capacity 1.5/ 2.0 TR by cleaning coils with the use of c shine solution, removing internal dust and cleaning of filters by using water pump jet and air blower, oiling & greasing wherever required and checking of all other parts and proper cooling complete all as specified and directed including taking down the indoor and outdoor unit and refixing it back to its original position. Note:- (i) All tools and machinery required deemed to be in quoted rates including servicing kit for indoor and outdoor unit with air compressor and servicing pump for removal of any foreign material from indoor/outdoor unit all as specified and directed. (ii) All minor parts costing reqd for satisfactory performance of the AC must be replaced and shall be deemed to be included in the above item rate.

Supply and fixed in replacement, fins and tube type air cooled copper condensers of following capacity of any make complete all as specified and directed including taking down the old U/S fins:-

Split type ACs of capacity 1.5TR/2 TR

Window type ACs of capacity 1.5TR

Refrigerator 185 ltrs.

Refrigerator 320 ltrs

Water cooler 40 to 150 ltrs/hr

Deep freezers of 200 to 400 ltrs capacity.

M&L for taking down window type AC 1.5 TR & 2 TR capacity for servicing, cleaning the inner side of air conditioners with the help of air blower, taking out the blower motor and re-fitting the same after washing with kerosene oil and oiling, repair of the unserviceable bushes, cleaning the condenser thoroughly with water and c shine solution with the help of wire brush, repair of the air filter, testing after complete servicing to the entire satisfaction of Engineer-in-Charge and refixing in same position complete all as specified and directed.

M&L for writing of SM/MES No etc on window AC/Split AC/Refrigerator/Water cooler/Deep freezer/Desert cooler with the help of stencil with synthetic enamel paint colour complete all as specified and directed.

Supply and fixing of Running/Starting aluminium body with lugs terminal capacitors of the following capacities for Acs/water coolers/ Refrigerators/ Deep freezers/desert coolers etc complete all as specified and as directed.

Upto 0-5 mfd.

Upto 5-30 mfd.

Upto 30-80 mfd.

Upto 80-120 mfd.

Supply and fixing of starting relay of approved make including dismantling old one suitable for the following

Water coolers 40 to 160 ltrs cooling capacity.

Refrigerator of 165 to 310 liters capacity.

Window type/Split type AC 1.5/2 Ton capacity.

Deep freezers of 200 to 400 ltrs capacity.

Supply and replace thermostats of approved make including dismantling old one of the following:-

Water coolers 80 to 160 ltrs cooling capacity.

Refrigerator of 165 to 500 ltrs capacity.

Deep freezers of 200 to 400 ltrs capacity.

Supply and replace overload protector relay of approved make including dismantling old one of the following:-

Water coolers 40 to 160 ltrs cooling capacity

Refrigerator of 165 to 310 liters capacity.

Window type/Split type AC 1.5/2 Ton capacity

Deep freezers of 200 to 400 ltrs capacity.

Supply and replace starting motor of approved make including dismantling old one of the following:-

Outdoor motor suitable for split ac/window ac 1.5/2 TR.

Indoor blower motor suitable for split ac/window ac 1.5/2 TR.

Swing motor with flapper for split ac/window ac 1.5/2 TR.

Motor for water cooler 40 to 80 ltr/hr.

Motor for water cooler 80 to 150 ltr/hr.

Motor for double door refrigerator 280 to 320 ltr/hr.

Motor for deep freezer 200 to 400 ltr.

Supply and replace cooling coil complete made out of copper tube of approved make complete all as specified and as directed by Engineer-in-Charge of :-

Window type/Split type room air conditioners of capacity 1.5/2 Ton cap.

Supply and fixing of copper tube with insulation suitable for split ACs of capacity 1.5/2 TR of the following sizes including dismantling of old U/S copper tube and insulation of the new copper tube

M&L for rewiring (wiring kit) of window type/spilt type ACs, water cooler, deep freezer, refrigerator with using best quality PVC insulated copper conductor cable including thimbles sleaves of suitable size & shape complete all as specified and directed.

Supply and fixing in repair of printed control board panel (PCB) suitable for window Acs/Split Acs of capacity 1.5/2.0TR complete all as specified and directed.

Supply and fixing in repair of printed control board panel (PCB) suitable for inverter type window ACs/Split ACs of capacity 1.5/2.0TR complete all as specified and directed.

Supply and fixing in replacement of new air filters of size 13.3 inch * 8.6 inch suitable for existing model of 1.5/2 TR Split/Window AC including taking down the old U/s air filters.

Supply and fixing in replacement of capillary tube/thermal expansion valve suitable for Split ACs/Window ACs /water cooler/refrigerator /deep freezer of existing make/model as reqd at site complete all as specified and directed.

Material and labour for spray painting of existing metallic surfaces including removing the old painted surface and making the surfaces even before painting complete all as specified and directed.

Supply and fixing in replacement of battery operated cordless remote control of existing make/ model suitable for split type ACs of capacity 1.5/ 2.0TR complete all as specified and directed.

Supply & fixing in repair of 20mm dia transparent PVC heavy duty flexible pipe ISI marked with and including necessary clamps & nails for fixing the drain pipe for drainage of swetting water of indoor unit of split type ACs complete all as specified and directed.

Supply and fixed in replacement Blower/ Condenser fan blade (PVC) assembly of existing make & size suitable for window type ACs/Split ACs of capacity 1.5/ 2.0TR complete all as specified and directed.

Supply and fixed in replacement of, PVC front grills of existing make, shape & size suitable for window type ACs of capacity 1.5/ 2.0TR complete all as specified and directed.

Supply and fixed in replacement, air sweep louvers with motor complete set suitable for window type ACs of capacity 1.5/ 2.0TR complete all as specified and directed.

Supply and fixing in replacement of sealed reciprocating/rotary type compressor for AC 1.5 TR of existing size and make and capacity as reqd at site including necessary brazing, soldering, pressure testing, refrigerant gas charging in appropriate quantity and leakage testing on completion complete all as specified and directed.

Supply and fixing in replacement of sealed reciprocating/rotary type compressor for AC 2.0 TR of existing size and make and capacity as reqd at site including necessary brazing, soldering, pressure testing, refrigerant gas charging in appropriate quantity and leakage testing on completion complete all as specified and directed.

M&L for gas charging with required quantity of refrigerant R-134/R 22/R 32/R 12 in refrigerator/deep freezers/water cooler of any capacity and make for its smooth functioning including carrying out vaccum and pressure test and necessary soldering/brazing to prevent leakage complete all as specified and directed.

M&L for gas charging with required quantity of refrigerant R-22/R 32/R 407/R 410 in window ac/split ac of any capacity and make for its smooth functioning including carrying out vaccum and pressure test and necessary soldering/brazing to prevent leakage complete all as specified and directed.

Supply and fixed in replacement, PVC sheathed, 3 core copper conductor flexible cable of following size with thimbles of suitable size & shape complete all as specified and directed.

2.5 sqmm 3 core.

1.5 sqmm 3 core.

Supply and fixed in replacement, sheet metal enclosure (AC box) including a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps 240 Volts complete all as specified & directed.

S&F in repair of 3 pin 15 A plug top suitable for power load applications complete all as specified and directed.

Material and labour disconnecting the existing refrigerators and transporting the same from site/AGE E/M Yard to workshop and back after necessary repair/ repair of old unserviceable or wornout accessories/ parts in the workshop and re-fixing/ re-connecting the same in existing position and testing on completion for efficient cooling complete all as specified and directed for the following capacities:- Note:- Gas charging and repair of spare parts of refrigerators shall be measured and paid separately under respective items of BOQ/ Sch 'A'.

Refrigerators of 100 to 320 Ltrs Capacity.

Supply and fixed in repair, compressors of refrigerators of following models including cutting the suction and discharge line for removing of un-serviceable compressors and fixing of new compressors by jointing suction & discharge line, welding, brazing/ soldering, vaccumising and charging of gas with required quantity of R-134(a) gas to achieve the efficient cooling & smooth functioning and testing on completion complete all as specified and directed:- Note:- Gas charging of refrigerators shall be measured and paid separately under respective items of BOQ/ Sch 'A'.

Refrigerators compressor for single door refrigerator of 175 to 230 Ltrs capacity complete all as specified and directed.

Refrigerators compressor for single door/double door refrigerator of 230 to 320 Ltrs capacity complete all as specified and directed.

Supply and fixed in repair, PVC stand of refrigerators 100 ltr to 420 ltr of best quality suitable for refrigerators of OFF sizes complete all as specified and directed.

M&L for preparation of existing outdoor unit of split type ACs any size including steel structure and base of structure complete all as specified & directed.

Taking down & shifting of existing window type ACs of 1.5/ 2.0TR capacity after disconnecting all electric connections and re-installation of the same at new location of work site after making the hole/ space in the wall including all other necessary materials as required to accommodate the AC and making good wall surfaces & hole as per existing and making all necessary electric connection and testing on completion complete all as specified and directed. Note :- The rate quoted above will include all the necessary tools and spare parts required for its reinstallation including gas charging after carrying out leakage test and new drain pipe & copper pipe with insulation as required at site.

Taking down & shifting of existing split type air conditioner of capacity 1.5/2.0TR to new location as directed including re-installation/ re-fixing the same at new location i.e outdoor and indoor units at new locations and making all necessary electric/ charging pipe line connections, commissioning and testing on completion and making good the disturbed surfaces of wall/ floor as per existing including comprising of the following accessories/ works complete all as specified and directed:- Note :- The rate quoted above will include all the necessary tools and spare parts required for its reinstallation including gas charging after carrying out leakage test and new drain pipe & copper pipe with insulation as required at site.

Supply and fixing of reverse valve (heating/ cooling) of existing make suitable for window/ split type ACs of capacity 1.5/ 2.0TR complete all as specified and directed.

M&L for insulation of copper pipes (refrigerant gas pipes) with insulating materials of approved quality for better cooling effects of split type ACs or heat resistance/ protection of copper pipes from atmosphere including sealing/ covering the same with packing tape complete all as specified and directed.

M&L for replacement of water dispenser of cooling & heating of water. cooling capacity 2.0ltr/hr and heating capacity 5.0 ltr/hr complete with all accessory suitable capacity compressor 4 230VoltAC,50HZ electric driven and other accessory including two(2)no water bottel 20 ltr capacity PVC each dispenser complete specified and directed.

Labour for disconnecting, dismantling and taking out the water coolers of any description, any make and in any position having capacity 40 to 150 Ltrs, cleaning and servicing of the water cooler with using C shine solution, taking out or removing all unserviceable/ defective parts of water cooler and fixing of new spare parts/ items i.e wiring kit, compressor, condenser, condenser fan motor, relay, capacitors, thermostat, overload relay and including necessary brazing, vaccumising, gas charging, reassembling/ reinstallation of water cooler, making connections and testing complete all specified and directed. Note:- repair of unserviceable/ defective/ wornout parts/ spares of water coolers shall be measured and paid under respective items as ''Supply & Fixed''

Supply & Fixed'' of new compressor for water cooler in repair suitable for capacity of 80 to 160 Ltrs capacity water coolers compete all as specified and directed.

Supply & Fixed'' in repair of unserviceable PVC connection 15mm bore of 450 mm long with brass coupling with washers at both ends and connection to water cooler and water main complete all as specified and directed.

'Supply & Fixed'' in repair of unserviceable 15mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed. (Note-Min weight should not be less than 142 gms.

M&L in repair of MS bracket/base for fixing of condenser fan motor with 02 Nos rubber bush and 02 Nos GI clamp with & including 04 Nos MS nuts and bolts and washers suitable for any type & capacity condenser fan motor of water coolers complete all as specified & directed.

Supply & Fixed'' in repair of unserviceable aluminium blade for condensing fan motor of water coolers/deep fridges of any model/ size as per existing complete all as specified and directed.

Disconnecting and taking out the defective/ non-functional desert cooler of any description and in any position/ installed at any floor. Strip opening of desert cooler, cleaning, servicing, oiling & greasing, painting of entire body etc of desert cooler, taking out and removing unserviceable/ defective parts and including replacement of unserviceable spares/ parts i.e condenser, internal wiring, re-assembling & testing of the desert cooler complete all as specified and directed. Note:- (i) Replacement/repair of defective/ worn out spares/ parts of desert cooler i.e condenser & internal wiring shall be measured and paid separately under respective items as ''S&F in repair''. (ii) All minor parts such as switch, rotary regulator, small piece of any cable shall be deemed to be included in the above rate for the satisfactory performance of the desert cooler.

S&F in replacement of unserviceable wood wool pads (set of three) in repair including PVC pipe pieces 03 Nos of required length & dia for connection of water distribution PVC elbows 03 Nos of desert coolers of (Approx) complete all as specified and directed.

S&F in replacement of unserviceable submersible pump for desert cooler in repair, heavy duty, single phase of power 20 to 150 watts and head 2 m complete all as specified and directed.

S&F in replacement of exhaust fan kit in the existing desert cooler of 0.25 HP capacity i.e metal blade set and electric motor of desert coolers with copper winding heavy duty, 450mm sweep, 1440 RPM with all connected items reqd for its installation complete all as specified and directed.

M&L for rewinding of the existing burnt exhaust fan kit motor of any size but less than 1 HP including ixing it back to its original position with necessary accessories reqd for its satisfactory performance complete all as specified and directed.

S&F of metal fan blade set for desert coolers for medium and heavy duty coolers of any size complete all as specified and directed.

M&L for removing of perished body of desert cooler overall size 0.750x0.750x0.910 mtr from existing site and replace the same with new body made out of 22 gauge PGI sheet by means of fabrication welding/ jointing having tank size Approximate 0.750x0.750x0.230mtr and front grill made out of 26 gauge PGI sheet 0.460x 0.460mtr size for air flow direction , 03 Nos perforated sheet side panels with wood pads size approximately 0.680x0.610mtr including pvc distribution pipes 3 Nos and also having electric control panel consisting two nos 5amp switch, one rotary speed regulator switch and 15 A plug top for connection complete and duly painted with two coats of synthetic enamel paint over one coat of primer internally and externally complete all as specified and directed.

S&F of detachable type perforated side panel in repair made out 22 gauge PGI sheet including wood pads of desert coolers of size as reqd at site complete all as specified and directed.

S&F of front grills desert coolers in repair, size 18"x18" of each made out of 22 gauge sheet as per sample and including piano type switch complete all as specified and directed.

S&F of ply wood 6mm thick, cut to shape as required on site and fixed on wall/ window/ cooler opening with and including necessary nuts & bolts/ screws with gully etc complete all as specified and directed.

Supply and fix in replacement of TPN DB double door 4 way sheet metal enclosure triple pole and neutral 415 volts and 200 standard bus bar of suitable size and common neutral link and earth bar all enclosed complete all as specified and directed.

Supply & fix in repair MCB TPN, 63 Amps, 'C' series, 415 volts, 50Hz, 10kA complete all as specified & directed.

S & F sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

S&F 'C' series MCB SP, 6 to 32 Amps, 240 volts, 50Hz , 10kA complete all as specified & directed.

S&F 'C' series MCB SPN, 40 to 63 Amps, 240 volts, 50Hz , 10kA complete all as specified & directed.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and green for single phase circuits) with three runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm and earth cable of 4 sqmm size drawn in and including PVC conduit not less than 25mm dia with its accessories all as specified and directed including taking down old U/S submain wiring of any size.

Taking out existing defective/unserviceable and renewal with new outdoor unit split type 1.5 TR with rotary compressor and copper tube condensers with metal fan blade and motor with all connected items reqd for its installation including new copper tube insulated and make complete all as specified and directed.

Taking out existing defective/unserviceable and renewal with new indoor unit split type 1.5 TR complete with all connected items i.e copper tube cooling coil, PCB ,blower motor, filter and make complete all as specified and directed.

Disconnecting of the unserviceable voltage stabilizers capacity upto 5 KVA from the site and removing to workshop for repair and re-fixing/testing/commissioning at the original position after rewinding / replacement of parts/spares to the extent required /reassembling complete all as specified and directed. Note :- Spares/parts shall be measured and paid separately under respective items of BOQ as " Supply only".

Supply and fixing of voltage stablizers of 4 KVA capacity including its installation and connecting with the existing machinery complete all as specified & directed.

Supply only main transformer with super enameled copper wire proper insulated upto 5 KVA capacity for volatage stabilizer complete as specified and directed.

Supply only volt meter 0 to 300 volts complete all as specified and directed

S&F in replacement of main PCB for voltage stabilizer 0.5 KVA to 5.0 KVA of approved make complete all as specified and directed.

S&F in replacement of auxiliary transformer for the 0.5 KVA to 5 KVA capacity stablizer of approved make complete all as specified and directed.

S&F of service valve for split Acs of 1.5/2 TR including all tools and minor parts required for its installation complete all as specified & directed.

S&F of hermetic sealed compressor suitable for deep freezer of capacity 200 ltrs to 320 ltrs including all necessary connection and gas charging complete all as specified & directed.

Note :- (i) The contractor will collect the complaint slip at 9 am from the AGE E/M office and will ensure that the unserviceable ACs are rectified within 24 hours of receiving of complaints. (ii) If contractor fails to make ACs serviceable even within 48 hrs time then panel recovery of 500/- per day for each complaint will be made from contractor dues. (iii) The contractor will detail one refrigeration mechanic and one helper for AC complaints on a daily basis. (iv) The contractor will detail one refrigeration mechanic and helper for all other summer cooling appliances on a daily basis. (v) No absentee of refrigeration mechanic and helper will be permissible beyond one day and subjected to a recovery of 500 per day from contractor dues.

Taking down Solar water heating system of 200 ltrs per day capacity from its position after disconnecting water connections, and re - fixing /reassembling in position after repair and testing, complete all as specified and directed.Note:- (a) Rate quoted by the contractor deemed to have been included making good of missing Nuts, Bolts and washers, unions, sockets, flanges, screws etc to make it fully functional, (b) Descalling/desludging, cleaning and washing of solar panels, hot water pipes, copper tubes, hot and cold water Tanks by using appropriate chemicals and reassembling the panels including necessary welding of collector fins as required. (c) Painting to staging, solar panel frames, hot water tank frame using one coat of synthetic enamel paint including necessary preparation of surfaces complete. (d) any other materials/Parts need to be replaced (to be measured and paid as supplied only).

S&F in replacement of Stainless steel, Water heater tank of capacity 200 LPD with heat exchanger and fully insulated type including all connected accessories like heating element 3KW capacity and suitable capacity of thermostat etc including providing PVC hose pipe of size 25mm dia approx length 02 to 03 RM for fixing from collector box to warm water tank including providing of clamps, nut and bolts as required at site and to match with existing SS tank specifications complete all as specified and directed. Note: (i) Thickness of new tank to be matched with existing tank. (ii) The work should be executed at the top of appx 20m height building.

Supply, fixing and erecting of supporting stands by using angle iron of size 40x40x5mm thick MS Flat for bracing support for legs including grouting etc suitable for 200 ltrs capacity worm stainless steel tank for solar water heating system complete all as specified and directed.

S&F compressed Glass wool (insulation materials) 48mm thick between Solar energy collector panel copper tubes frame and Aluminium body panel including securing it on panel by means of necessary adhesive complete all as specified and directed.

S&F in replacement rotational moulded, multilayer HDPE water storage tank of 500 ltrs capacity (Cylindrical vertical with closed top) ISI (IS 12701-1996) marked including PVC cover fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia brass ball valve with epoxy coated Aluminium rod with high density plastic float ball including fixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repairs GI tubing medium grade for hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore with all fittings complete all as specified and directed.

S&F in repairs GI tubing medium grade for hot water pipe duly insulated with glass wool and aluminium cladding 25 mm bore with all fittings complete all as specified and directed.

Supply and filling anti freezing liquid in 20 ltr PVC cane for solar water heater system complete all as specified and directed.

S&F in repairs toughened glass of size as per sample not less than 2 Sqm, 4mm thick of solar water heater panel of capacity 200 LPD complete all as specified and directed.

S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.

S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 20mm bore complete all as specified and directed.

S & F in replacement of PVC flexible hose pipe 4 PR suitable for hot water of size 25mm bore pipe with 6mm PVC wall thickness complete all as specified and directed,

S&F sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in conduit not less than 20mm, complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 2 way Single door without bus bar complete all as specified and directed.

Supply and fixing MCB SPN 40 to 63 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply, Install, Testing and Commissioning of complete Solar Hot Water System (Flat Plate Collector) with heat exchanger type I rated, solar panel of heavy duty steel tank with thermally insulated cladding complete including welding cutting required at the time of installation etc based on indirect transfer of heat of capacity 200 ltrs (LPD) minimum capacity including makeup water tank for recommended capacity as per OEM, complete switch electric power backup 3 KW capacity including all necessary electrical connection with control device along with provision of electric connection of power backup at terrace level along with control switch at ground foor, water storage tank 250 ltrs capacity , MS staging for resting tank on suitable height on roof etc complete all as specified and directed.

Taking down, dismantling / unscrewing electric water heater (Geyser) for repair / servicing and refixing after repair reconnecting of electrical and water supply and testing with water pressure complete as specified and as directed. Note : If required to deposit unserviceable water heater to AGE (E/M) yard and collection serviceable against replacement from AGE (E/M) yard is responsibility of contractor)

S&F in replacement Heating element 2 KW (Triangular type) with rubber gasket made of copper, ISI marked, 230 Volts suitable for 25/50 Ltr capacity of Geysers as per site requirement complete all as specified and directed.

S&F in replacement Heating element 2 KW (Assembly type) made of copper, ISI marked, 230 Volts suitable for 25 Ltr capacity of Geysers as per site requirement complete all as specified and directed.

S&F in replacement Heating element 3 KW made of copper, ISI marked, 230 Volts suitable for 200 LPD capacity of Solar water heater as per site requirement complete all as specified and directed.

S&F in replacement Thermostat made of copper, ISI marked, suitable to adjust the temperature from 0º C to 80º C for 25 /50 Ltrs capacity of Geyser as per site requirement complete all as specified and directed.

S & F in repair base plate assembly 6/8/9 Holes complete with rubber packing suitable for water heater (geyser) of capacity 25 Ltrs of any make/any model complete all as specified and as directed

S & F in repair base plate assembly 6/8/9 Holes complete with rubber packing suitable for water heater (geyser) of capacity 50 Ltrs of any make/any model complete all as specified and as directed.

S & F in repair plug top 3 pin 16 Amps. 230 Volts, ISI Marked complete all as specified and directed.

S & F in repair Stainless steel inner tank suitable for 25 ltrs Geyser of any make / shape /holes for fixing geyser assembly complete all as specified and directed.

S & F in repair Stainless steel inner tank suitable for 50 ltrs Geyser of any make / shape /holes for fixing geyser assembly complete all as specified and directed.

S & F in repair Outer MS shell complete with hanging legs including top and bottom cover suitable for 25 Ltrs capacity geyser of any make, shape & size as per existing but gauge of sheet not less than 22 SWG all as directed.

S & F repair neon lamp indicator red / green rectangular / round type, complete all as specified and as directed.

S & F in repair Air release valve (weight type) (As per sample) complete all as specified and as directed.

S & F Rubber gasket of thickness 5 mm for geyser assembly of 06/ 08/09 holes all as specified.

S& F in replacement fastener mild steel 100mm long x 10mm dia with pin and bolts complete for hanging of geyser and making good the disturbed surfaces including plastering and white washing complete all as specified and directed.

S & F in repair glass wool for geyser complete all as specified and as directed.

M & L for brazing of Copper/Stainless steel inner tanks of 25/50 ltr capacity of geyser and testing complete all as specified and as directed.

S&F in replacement PVC connection Hot/Cold water grade 18" long,15 mm dia with two Nos coupling nut of brass, heavy duty, ISI marked, complete all as specified and directed.

S&F in replacement PVC connection cold water grade 24” long 15 mm dia with two Nos coupling nut of brass, heavy duty, ISI Marked, complete all as specified and directed.

S & F in repair PVC insulated flexible cable 3 core with standed copper conductor of size 2.5 Sqmm against unserviceable flexible cable complete all as specified and as directed.

M/S OM Enterprises (BID ID -3079078)

Balaji Associates (BID ID -3064368)

3Krishna Enterprises (BID ID -3066977)

VARDMAN ENTERPRISES (BID ID -3066938)

M/s Laxmi Associate (BID ID -3067767)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3068562)