Mohalla-Subhashnagar Me Nahar Ke Pich Marg Se Shabbir Master Ke Ghar Hote Huye Hariram Ke Ghar Tak Nali And C.C. Road Ka Nirman Karya. Me Chhangu Ke Makan Se Siddiqui Farm House Tak Covered Nali Ka Karya.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Earth work in Foundation in ordinary soil, excavation to be in the form of regular pit not exceeding 1/2 metre (20'') in depth and earthwork in embankment to be 20 cm (8'') layers including ramming and dressing the surface to required levels and slopes and also including 1.5 mts lead. The earth form cutting to be used in making embankment or to be desposited on spoil banks withen 30 m. (100 ft.) distance as directed by the Engineer-in-charge Excluding Royalty.

Providing and laying Cement concrete 1:4:8( 1 cement :4 fine sand : 8 graded brick ballast 40 mm. nominal size) including supply of all materials. labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation and floors.

First class bricks work in 1:4 in cement and fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

12 mm thick plaster with cement mortar in proportion of 1:2 cement and fine sand of 1.25 F.M.

Construction of un-reinforced, dowel jointed,at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2M30 (Grade) coarse and fine aggregates conforming to IS 383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including leveling the formwork as per drawing spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in confinuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, scalant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved curing of concrete slabs for 14 days including trimixing by floating method & adding hardener in required quantity and depth upto 5 cm complete as per direction of Engineer in charge to meet tenchincal specification.

Providing laying of R.C.C work in 1:1.5:3 with cement, coarse sand and 20mm gauge stone grit including all complete as per S.I. No. 283 for RCC Drain Cover in Road

M.S or iron work in plain work such as R.C.C work inc. all complete As per S.I No

Supply & fixing of 12.50 mtr high mast shaft of approved make with rising system hot dip glavinized inside & out side dip, heaving pole sheet thickness 3 mm .Top dia miniumum 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable foe wind velocity as per IS 875 part 3 & having circumferential weld with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system. with steel wire rope 6mm dia dauble drum winch including making suitable foundation as per manufacture drawing/site reuitment along with foundation boits nuts, washers, anchor plates etc complete in all respect ( PWD SH NO-651)

Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 170 to 200 Watt. Conforming to IP 66 Protection complete in all respect. Pwd SI no 1455