Construction of Multipurpose Hall near Raja Mandlik Dev Sathan at Patoli Brahmana Ward No. 65

Amount

Engagement of labour for site clearance including leveling of ground and disposal of unserviceable material complete job.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil

RBM filling including Ramming, Rolling and consolidation etc. (complete job).

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. cum

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in:Cement mortar 1:6 ( 1 cement : 6 coarse sand) Including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth : Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for half Brick masonry in superstructure above plinth level upto floor V level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)

15mm Cement plaster on the rough side of single or half brick wall of 1 : 6 ( 1 cement : 6 coarse sand)

12mm Cement plaster of mix: 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and fixing of Alumininium Door, Windows and vintilaters panelled and glazed including Handle bar, Brass Lock etc and the allied items Complete job.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface including Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Provision for design, Drawing and consultancy and bearing capacity of soil test charges complete job.

Providing and fixing of Inaguration Plate of size 3'-0 x2'-6 of Granite Marble stone of Black colour with carving letters (Complete Job)

Earth work in surface excavation not exceeding 30 cm in depth butexceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead upto50meterand lift upto 1.5m, as directed by Engineer in-Charge. All kinds of soil :

Providing and laying under layer including preparation of ground 75.mm thick (Un-Compacted) layer of dry stone agg. and grouted with sand (complete job).

Providing and fixing of 1'x1' onex tiles over 20 mm thick cement mortar 1:4 ( 1 cement : 4 sand ) complete Job as per the direction of Engineer In-charge.

Providing and fixing of 3 seater stainless steel benches with arms and back Complete Job

Removal of Excavated mulba, dismantled unserviceable material from the site of work by MT/Animal transport or other wise including loading /unloading complete job.

Providing and fixing white vitreous China pedestal type Water closet (European type) with seat and lid,10 ltr low level white vitreous China flushing cistern and CP flush bend with fitting and CI bracket, 40mm flush make bend, overflow arrangement with special of standard make and mosquito proof coupling of of approved Municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. Pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I bracket, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- white vitreous China wash basin size 550x400 mm with a 15 mm CP brass single hole basin mixer

Providing and fixing white vitreous China flat back half stall urinal size 580x380x350 mm with white P.V.C automatic flushing cistern, with fittings, standard size C.P brass flush pipe, spreaders with unions and clamps (all in C.P brass) with waste fittings as per IS: 2556, C.I trap with outlet grating and other coupling in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required. Range of two half stall urinal with 5 literP.V.C automatic flushing cistern.

Providing and fixing of U-PVC pipes 110 mm Complete Job

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:20 mm dia. nominal bore medium

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:15 mm dia. nominal bore medium

providind and fixing PVC P trap 110mm as per the direction of Engineer - in - charge Complete Job

Providing and fixing PTMT grating of approved quality and colour.125 mm nominal dia with 25mm waste hole

providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to ISI standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

providing and fixing of PTMT Towel rail complete with barckets fixed to wooden cleats with CP brass screws with consealed fitting arrangement of approved quality and colour 450mm long towel rail with total lengh of 495mm,78mm wide and effective height of 88mm,weighing not less than 170gm.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete : flexible pipe 40 mm dia

Providing and fixing uplasticized PVC connection pipe with brass unions 20 mm nominal bore

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing & Fixing of 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. Brass screws and washers complete.

Providing and fixing PTMT urinal cock of approved quality and colour: 15 mm nominal bore,80 mm long ,42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms.

Providing and fixing of ball valve (brass) of approved quality ,High or Low pressure ,with plastic floatscomplete 20 mm nominal bore.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Supply and placing on terrace (at all floor level) polythylene water storage tank ISI 12701 marked indicating the BIS licence no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank( Sintex ,electroplast, star, Lotus for equivalent having valid if ISI.

providing and fitting of electric motor of 1 HP water pump /motor of make ISI marked,including fitting complete job as per the direction of Engineer incharge complete job

Providing and fixing PVC Bend 110mm as per the direction of Engineer incharge complete job

Providing and fixing Ceiling fans of approved brand and manufacture of ISI marked as per the direction of Engineer - in- charge Complete Job

Providing and fixing Exhaust fans of approved brand and manufacture of ISI marked as per the direction of Engineer - in - charge Complete Job

Providing and fitting of Electric Points Complete Job as per the direction of Engineer Incharge.

Carriage of material Sand and stone Aggregate 20 mm by MT 10KM

Carriage of Bricks by MT avg. 12KM

NIRMAL SINGH

Rohit Khajuria

ASHWANI KUMAR

Bhag Ali Choudhary