GE C 63 2021 22 MISC REPAIR TO BDY WALL RAIN DRAIN CULVERTS HARD STANDING AND SEWAGE LINE IN THE AREA OF AGE BR I UNDRE GE CENTRAL DELHI CANTT 10

Amount

Demolition of brick work or stone masonry built in cement mortar in any position including segregating serviceable/unserviceable bricks/stones complete all as specified

Taking down cement plaster of any description on brick or stone wall incl raking out joints, hacking for key, scurbing down with water etc. complete all as specified

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) and removing out side MD land complete all as specified

M&L PCC 1:2:4 type Type B-2 (using 40mm graded crushed stone agg) as in surface channel and drains complete all as specified

M&L for Brick work using subclass 'B' bricks old size, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified

All as as per srl item No 5 here-in-before but except brick

All as per item No 6 here-in-before but in half brick walls built in CM 1:4 complete all as specified

M&L 15mm thick cement plaster in 1:4 on fair faces other than fair faces of brick walls finished even and fair with out using extra cement complete all as specified

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors or fixed on walls 110mm dia fixed in repairs complete all as specified

S&F in repairs PVC (SWR) bends of any radius ( 110mm bore) including jointing with solvent cement complete all as specified complete all as specified

S&F in repairs PVC (SWR) junction double,(double T, 110 mm bore), equal or unequal , including jointing with solvent cement complete all as specified

M&L for providing cement concrete type B-1 1:2:4 (20mm graded aggregate) as in copings complete all as specified

M&L for providing 50 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in flooring finished fair & even completed all as specified

M&L for providing 100 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in hard standing laid in alnate bays and filled with sealing compound grade 'A' completed all as specified

M&L cement concrete Type B-2 1:2:4 (40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pillasters, butresses columns, pillars, boundary pillars and posts (including caps and bases)

Forming contraction (Dummy) Joints 65mm deepx10mm wide filled with sealing compound Grade 'A' complete all as specified

M&L Machine pressed precast concrete PU coated colour interlocking paver block any shape and size, with grey cement and pigment confirming to IS 5658-2006 of 60 mm thickness M-35 Grade laid over & incl 25mm thick sand cushioning including dismantling existing tile complete all as specified and directed.

M&L 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 complete all as specified

S&F Chequered cement concrete PU coated colourtiles 300cm X 300cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete and for raising the level etc. complete all as specified

Dismantling of wrought iron or mild steel work of any description

S&F framed work such as grills framed guard bars fencing posts, door gate etc. and similar work conforming to Fe 410.0 or Fe 310.0 completed all as specified.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic anamel paint over one coat of red oxide

M&L for preparation of newly plastered surfaces of wall & applying two coat of CBP completed all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition)

S & F mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including form work all as specified

M & L for pre cast manhole coverRCC 1:2:4 type B-1 using 20mm graded aggregate with plain fair faces including chamfers, weathering, throating etc and setting in CM 1:4 complete with joint to match

M&L Formwork to chullah hoods, chajjas, troughts and similar items including edges.

M&L for Reinforced Concrete pipes 600 mm class NP2,Laid and jointed Complete with collars laid in trenches and jointed as specified.

S & F for precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mmx80mm omplete all as specified and as directed.

S & F for precast plastic fibre reinforced cement concrete Manhole covers with frame medium duty of overall size 450mmx450mmx50mm factory made (make-polycrete) all as specified and directed by Engineer-in-Charge.

Schedule of Credit

imran construction company

LAMBA ENTERPRISES

SHREE RAM BUILD TECH

M/S ANIL KUMAR

M/S HARINDER SINGH

PG CONSTRUCTION AND COMPANY

B. S BUILDERS