SPL REPAIR TO BLDG NO P 04 PATH WITH INTERLOCKING TILES NEAR BLOCK NO 53 54 AND 71 OFFICER MD ACCN IN DILKHUSH AND T 21 OR SINGLE LIVING ACCN IN AGEA BR II UNDER GE DANAPUR CANTT

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed.

Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises all as specified.

M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40mm graded agg) in fdn, sub base, mass concrete & cinder concrete etc. complete.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick rendering in CM 1:4 complete all as specified & directed.

M&L for 10mm thick Light shade vitrified ceramic tiles, exceeding 0.36 sqm but not exceeding 0.42 sqm in vertical surface such as skirtings, dados etc, set & jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified & directed.

M&L for Coloured glazed ceramic tiles (450 x 300)x 6 to 7mm thick (digital type) on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar 1:4 all as specified and directed for shade, pattern and laying of tiles complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed

Taking down cement plaster on wall/ceiling/roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick wall in cement mortar (1:6) finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

M&L rendering 5 mm thick in cement mortar (1:3) on ceiling finished surface even and smooth without using extra cement, complete all as specified and directed.

Supply only water proofing compound (liquid),ISI marked complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.

S&F powder coated aluminium anodised sections in existing partition or door frame or door shutter or window frame or window shutter swing or sliding including aluminium clip cleat, sashbars, glazing clips, rubber packing, aluminium anodised beading, locks for each shutter etc of approved size and thickness including drilling holes in walls, ceiling, floors with screws and rawl plugs etc including taking down and refixing after necessary repairs and all as specified and directed.

S & F 5.5 mm thick Sheet glass with frosted film and sun control film fixed with rubber gasket and powder coated aluminium beading to aluminium frame not exc 0.5 Sq.m in each pane complete all as specified and directed.

S & F 5.5 mm thick Sheet glass with frosted film and sun control film fixed with rubber gasket and powder coated aluminium beading to aluminium frame exc 0.5 Sq.m in each pane complete all as specified and directed.

S&F powder coated anodized aluminium grill (diamond shape of approx size 100x100mm) made out of aluminium flat of size 4x5mm as approved by Engr-in-Charge/GE for window/ ventilators etc complete all as specified & directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and as directed by Engr-in-Charge.

SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.

S&F 200mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete as directed by Engr-in-charge

Taking up or down steel tubing and connections, 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm dia complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed.

S&F tubes medium grade galvanized with all fittings and fixed to walls and ceiling or laid in floors of 20mm bore complete all as specified and directed.

S&F in repair vitreous china wash hand basin size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.

S&F in repairs Bib taps, cast copper alloy, chromium plated , screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specified and directed.

Supply and fixing in repair 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F as in repair 15 mm dia angle cock, chromium plated, cast copper alloy, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair Brass CP towel rail 20mm dia `D' type 60 cm long between flanges complete all as specified and directed.

S&F in repair of stainless steel soap dish, of standerd size and shape complete all as directed

M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded aggregate) including form work wherever necessary complete all as specified and directed .

M&L for 18 to 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F MS TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoopinbg for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor or trenches of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and complete all as specified and directed..

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity including CP tank nipple complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty including preparation of new surface complete.

M & L for two coats of oil bound distemper on ceiling over a coat of primer of surfaces complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

S&Fof Angle posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc and similar work conforming to Fe-290 Gde E-1654 complete all as specified and directed.

S&F Galvanised 2 strand steel bar bed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line wire to be measured).

M&L for RCC 1:1. 5:3 (using 20mm aggregates) for slab supported on wall, beam or columns in floors, roof landings , balconies, deck slabs and in shelves and the like.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works not exe 200mm thick (horizontal or sloping) rough finished of flat concrete surfaces.

Boring holes 3m deep and 300 mm dia of pile in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. pier holes, etc. not exc. 10 Sqm on plan and getting out in in any type of soil complete all as specified and directed.

M&L cement concrete type C2, 1:3:6 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as spd and as directed

M & L for providing reinforced cement concrete 1:1.5:3 using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete1:1.5:3 using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

Form work to sides of rough finished surfaces of concrete flat foundations, footings, bases of columns, sides and sofits (if any) of foundations & plinths beams and similar wk flat etc complete.

Form wk to rough finished square, rectangular or polygonal concrete surfaces as in sides of columns, pillars, posts, struts,etc complete.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down and re-fixing mild steel gate including necessary hold fasts, prepared for hanging and hinges etc complete all as specified and as directed by Engineer-in-charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance exc. 50m but n.exc 250m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L for fixing of GI pipe medium grade 50 mm dia bore embedded in PCC bedding all as specified.

S&F mild steel work Fe 410 W (Gde-E-250) quality 'B' for joist, channel, angle or tee section fixed independently, without connecting plate, etc (cut to ordinary lengths) to PCC bed block complete all as specified.

M&L for drilling holes upto 12 mm dia in angle iron support exc 3 mm but not exc 12 mm thick complete all as specified and as directed by Engr-in-charge.

S&F mild steel work Fe-410 W (Gde-E-250) quality 'B' flat iron fillets including holes and fixed with nuts and bolts to angle iron support complete all as specified and as directed.

M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in bed blocks for fixing of angle iron, coping, levelling course and similar works, etc complete .

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete

S & F concertina coil of 60 CM dia opening and weight of not less than 400 gram per RM fixed to 'Y' type fencing binding with and including MS wire annealed not than 0.9 mm dia complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

M&L for Machine Pressed precast glazed colour reflective PCC interlocking paver block 80mm thick mixed with grey cement and pigment, laid dry and bedded over and and including 50 mm thick sand cushion complete all as specified and as directed by Engr-in-Charge. The pattern of paver block shall be approved by GE and shall be of approved make.

Taking down shutters of any description exc 2 Sqm each complete all as directed.

Dismantling of fillets, rafters, purlins etc under 40 sq cm in section, in any position complete for framed work complete all as specified and directed..

Dismantling timber scantling 40 sq cm and over in section in any position, framed work complete all as directed.

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed..

Dismantling of asbestos cement sheets, corrugated or semi corrugated etc in roof covering complete and set a side all as directed.

S&F steel windows with side hung shutters including projecting type hinges with MS handles, steel peg stay, and tower bolts complete with glazing & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed.E43

All as per srl item No 90.00 here in before but without glazing bars complete all as specified and directed..

S&F factory made 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S&F flush shutter, 30 mm thick, solid core construction with block board core, and ply wood face panels but both face is covered with decorative face veneer with lipping complete all as specifed and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specifed and directed.

S&F factory made solid Panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as per specification and drawing complete all as specifed and directed.

S & F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate), as in back filling of pressed steel frames and similar work including necessary form work as required complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

S&F MS framed work such as grills, gratings, framed guard bars etc and similar work, confirming to Fe 410-0 or Fe 310-0, complete all as specified and directed

S & F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed etccomplete all as specified and directed

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 75 mm complete all as specified and directed.

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F 3 mm thick sheet glass, ordinary quality, and glazing with oil putty in square/rectangle n exc 0.50 sqm in each pane, complete all as specified and directed

S&F mild steel, 300mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including MS butt hinges, medium weight, cold rolled 50mm long, articles n exc 200 Cu cm each of Ist class soft wood complete all as specified and directed..

M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base to receive floor finish complete all as specifed and directed.

M&L for colored glazed ceramic tiles in verticale surfaces 300 x 200 x 7 mm thick set over 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed.

M&L for Non -Skid Ceramic coloured tiles (joint free) 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm , in floors etc over and including15mm thick screed bed in cement mortar 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth using extra cement complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M&L for Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S &F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm

S&F for hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.

M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

2nd Class hard wood, plain solid straight chowkhats/frames wrought framed and rebated on the solid rounded or chamfered put to gather with glue pinned at joints complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed

S&F steel work in tubular trusses, Purlins and rafter including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of wall and applying two coat of cement base paint incl removal of existing treatment complete all as specified and directed.

S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed.

S&F repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Make : Parryware/Prayag/Jaquar

Supply and fixed in repair shower rose brass chromium plated with swivel joints, 125 mm size, fixing to steel pipe or union complete all as specified and directed..

S&F in repairs PVC connections 15 mm dia size and 450mm long with 2 Nos check nuts its washer complete all as specified and directed.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC) complete all as specified and directed.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed. Make Parryware(Superfine), Cera (Ist Quality), Jaquar

S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and directed .

S&F mild steel conduit curtain rod with PVC coating fancy type drapery rod 20 mm dia of any colour as approved and fixed with bracket complete.

Supply and fixing PVC (SWR) bends (any radius) 100/110mm complete all specified.

Supply and fixing PVC (SWR) Junction single ,(single T) equal or un equal (any radius) 100/110mm complete all specified.

Dismantling of PVC water tanks of 1000 ltrs capacity including all fittings such as nipple, float valve etc all as specified and directed

S&F 1000 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including incl Screed bed or bedding layer of Cement Mortar (1:6), 20 mm thick for laying floor finishes, necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed. Note: (size of the stone slab not less than 22"x22")

M&L Machine cut Kota stone slab flooring 20-25mm thick as in skirting, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete incl 15mm thick plaster in CM 1:6 complete all as specified and directed.

M & L for Excavating in trenches, in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete as specified and directed..

M & L for Excavating in trenches, in soft/loose soil not exceeding 1.5m wide and exceeding 1.5mbut n.exc 3.0m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete as specified and directed..

M & L for Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete as specified and directed..

M & L for Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete as specified and directed..

M & L dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable and gentally hand ramming and consolidation of thickness of sand 18 cm all as specified and directed by Engr - in - Charge. Note :- Sand thickness shall be measured 18 cm only .

M&L for bricks cover of old size bricks sub class 'B' with width equal to the length of the brick laid dry & flet abutted with with each other with gap between adjacent bricks n.exc 10 mm over UG cable for protection compete.

Supply and erecting steel tubular pole, swaged, complete with cast iron base plate, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints, type 410-SP-31 (9 meter long) complete, Including disconnecting and taking out old damage PCC pole all as directed. Note Excavation & Earth work and PCC foundation/base shall be measured and paid separately under relevant items of this BoQ.

Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 60 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe bracket including three years on site warranty from manufacturer complete all as specified and directed. Make: Havells Cat No: ENDURAPEARLSL60WLED757SASYTOPCMP /CG/PHILIPS/BAJAJ

Taking out old unserviceable cable of any size, GI pipe protection, bircks including separating serviceable bircks & set aside and removing un-unserviveable bricks form position complete all as specified and as directed.

Supply , laying & testing in repair for XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 10 Sqmm nominal cross section x 2 core.Make of Cable: Havells/Polycab/Grandlay

Supply and fixing of GI tubing, light grade, 40 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete.

Taking down old unserviceable convetional street light fittings/ post top lantern/bollards etc of any type/model including associated accerssories form 8.5/9 mtr pole/Top of the building/ other similar situation and keep in safe costudy complete all as specified and directed.

Supply & fixing pole junction box (Loop IN Loop OUT) of size 200x250x150mm depth made out of 2.00 mm CRCA sheet CPRI approved factory made, weather, dust & vermin proof with front door, two nos of MS flat iron of size 25x3mm pole mounting clamp and suitable locking arragement including applying two coats of Powder coated paint over exposed external & internal surfaces with three phase and neutral copper strip busbar of size 20x3 mm of length 180 mm wrapped with PVC SLEEVES with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connection mounted on hydrograpic insulator with nuts & bolts at both ends of busbar and one no DIN rail for mounting of MCB SP and steel flexible pipe of suitable size for outgoing connection as required complete all as specified and directed.

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection complete all as specified and directed by Engr-In-Charge. Make : Legrand/Schneider/Siemens/L&T.

M&L for one run of 1.5 Sqmm 3 Core (Nominal Area) PVC Sheathed multi stranded unarmoured copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) from pole juncition box to light fitting with suitable size copper cable lugs and connector complete all as specified and directed. Make: Plaza//Polycab/Havell'S.

Vijay Bakshi and Son

M/s Naresh Chand Agrawal

jaglalchoudharyandsons

HARINANDAN RAI SONS

M/S MODERN CONSTRUCTION

M/S SAROJ KUMAR SINGH

M/S Priya Trading Agency