REPAIR RECANNING AND POLISHING OFF VARIOUS TYPES OF WOODEN FURNITURE UNDER GE CENTRAL BANGALORE

Amount

NOTE FOR ALL ITEMS : (i)Removal of following existing unserviceable components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part in-tact as applicable as per drgs. (ii Work will be executed where the furniture exist in different User Units of GE (Central)Bangalore including BSO's Furniture Yard as directed by Engineer-in-Charge. Bed hard with ply top: FD-246 (a) Removing the existing Unserviceble/broken long rail and S & F New 1st class teak wood long rail of size 90x35x1980mm all as specified and as directed by Engineer-in-Charge.

(b) Removing the existing Unserviceble/broken short rail and S & F New 1st class teak wood short rail of size 60x60x900mm all as specified and as directed by Engineer-in-Charge.

(c) Removing the existing unserviceable stiffener and provision of new stiffener I st class teak wood all as per drawing and as directed by Engineer-in-charge.

(d) Removing the existing unserviceable leg on head board side and S & F 1st class teak wood leg of size 60x60x660mm including french polish all as per drawing and as directed by Engineer-in-charge.

(e) Removing the existing unserviceable leg on foot board side and S & F 1st class teak wood leg of size 60x60x500mm including french polish all as per drawing and as directed by Engineer-in-charge.

(f) Removing the existing unserviceable /damaged of head board frame and S & F new head board frame including provision of 12mm dia half cut round teak wood beading all as per drawing and as directed by Engineer-in-charge.

(g) All as per Item No 6 above but for foot board frame

(h) Removing the existing unserviceable /damaged 4mm thick plywood from both side of head board frame and S & F new 4mm thick plywood one side teak vennered face for both sides of head board frame including provision of 12mm dia half cut round teak wood beading all as per drawing and as directed by Engineer-in-charge.

(j) All as per Item No 8 above but for foot board frame

(k) Removal of existing unserviceble plywood carefully and Supply and fix 12mm thick BWR grade of size 1830x900mm with screws all as directed by Engineer-in-charge.

(l) Tightening of all parts of Bed hard ply top Note for Item No 1.1 to 1.10 :- Unit rate quoted shall be deemed to inclide scrappig the old polish after filling the cracks, joints and un even surfaces with wax and then polish two coats of french polish to complete item as shown in drgs and as specified and directed by Engineer-In - Charge

Chair Easy with Cushion: FD-358 (a) Removal of unserviceable seat & Hand Rest cushion of Chair Easy cushioned and provision of new seat foam 75mm thick of 32 density cover with leatherised rexine to fix on 12mm thick plywood commercial to Chair easy cushioned all as per drawing and as directed by Engineer-in-Charge

(b) Removal of unserviceable back cushion of Chair Easy cushioned and provision of new back foam 50mm thick of 32 density cover with leatherised rexine to fix on12mm thick plywood commercial of Chair easy cushioned all as per drawing and as directed by Engineer-in-Charge

(c) Tightening of all parts of Chair Easy Cushioned Note for Item No 1.12 to 1.13 :- Unit rate quoted shall be deemed to inclide scrappig the old polish after filling the cracks, joints and un even surfaces with wax and then polish two coats of french polish to complete item as shown in drgs and as specified and directed by Engineer-In - Charge

Chair Dinning Long Back : FD-357 (a) Removal of unserviceable seat cushion of Chair Dining Long Back and provision of new seat cushion of 32 density covered with leatherised rexine fixed on12mm with plywood commercial of Chair Dining Long Back all as per drawing and as directed by Engineer-in-Charge

(b) Removal of unserviceable back cushion of Chair Dining Long Back and provision of new back foam 50mm thick of 32 density covered with leatherised rexine to fix on 12mm with plywood commercial of Chair Dining Long Back all as per drawing and as directed by Engineer-in-Charge

(c) Tightening of all parts of Chair dining long back FD-357 Note for Item No 1.15 to 1.16 :- Unit rate quoted shall be deemed to inclide scrappig the old polish after filling the cracks, joints and un even surfaces with wax and then polish two coats of french polish to complete item as shown in drgs and as specified and directed by Engineer-In - Charge

Side Board : FD-241/371/372/1112 Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the side board complete and all as specified and shwon on drg. (a) Top

(b) Shutter made out of prelaminated particle board exterior grade size of 220mm x 435mm x 18mm thick including 4 mm thick shisham wood beading all around fixed with continuous piano type hinge 40mm wide.

(c) Drawers made out of prelaminated teak faced pre laminated particle board shown on drg.

(d) Aluminium anodized knob 25mm of best quality.

(e) Bottom of side board made out of pre laminated particle board of 18mm.

(f) Sides of side board made out prelaminated particle board of 18mm.

(g) Front and rear leg including long and side rail frame fabricated out of shisham wood all as per shown on drg.

(h) Plywood 6mm thick commercial on back side of the side board.

(j) French polishing on surfaces of wood of side board width or girth including cleaning and preparing the surface including one coat of wood filler on new works with two coats.

Table Dining 6 person: FD-239/273/ FD/MAP-II/03 Dismandling the unserviceable furniture parts for the following and supply & fix with new parts made out of 1st class teak hard wood all joints to be fixed with Bamboo pins wooden screws and corner / bracket (L shape) of size as required and fitted with screw between long rail to legs short rail to legs. after completion of repair scrapping the old polish filling the cracks joints and uneven surfaces with was and apply two coats of french polish to complete item as shown in drawing and all as specified and as directed by Engr-in-Charge. (a) Legs

(b) Front Rail

(c) Side Rail

(d) Centre Stiffner

Table Dining 8 person : FD-239/273 (a) Legs

(b) Front Rail

(c) Side Rail

(d) Centre Stiffner

Table Dining 4 Person : FD/MAP-II/03 (a) Legs

(b) Front Rail

(c) Side Rail

(d) Centre Stiffner

Tables 3'x2' with and without drawer: FD-41/42/55/ 224/ 223/ 284 ( 900x600x760mm) (a) Legs

(b) Front Rail

(c) Side Rail

(d) Centre Stiffner

(e) Drawer

Table 900x900x760MM : FD-291 (a) Leg

(b) Front Rail/Side Rail

Table Writing of sorts: FD-249/275 (a) Legs

(b) Front Rail

(c) Side Rail

(d) Centre Stiffner

(e) Drawer made out 12mm thick 1st class teak wood and 6mm thick plytop BWR grade for bottom

(f) Door shutter made out of 18/19 mm thick prelaminated particle boards exterior grade fixed with continuous piano hinges upto shutter height with wooden screws and providing 1st class teak wood beading all round the shutters as directed

(g) Sides of table writing made out of 18/19 mm thick premlaminted particle board duly fixed with wooden screws

(h) Back side of the made out of 6mm thick plywood OST to be fixed as per drawings

Teapoy : FD-34/ 232/278/382 (a) Leg

(b) Front/ side Rail

(c) Stiffner

Table Centre : FD-274 (a) Leg

(b) Front Rail

(c) Side Rail

(d) Stiffner

(e) Centre Stiffner

Peg Table : FD-277/384 (a) Leg

(b) Front/side Rail

Removal of existing old unserviceable top and S&F new top made out of 18/19mm thick prelaminated particle board duly providing 6mm thick TW edging half round all round the top duly french polished for the following furniture: FD-239/273/ FD/MAP-II/03 (a) Table dining 6 persons

(b) Table dining 8 persons

(c) Table 3'x2' without drawer/with drawer

(d) Table writing

(f) Teapoy

(g) Peg table

(h) Table Centre

(j) Table Dining 4 Person

Removing the existing unserviceable parts of following chairs of sorts, supply and fix following new parts made of first class hard wood (teak wood) made to shape fixed in position complete all as directed and shown on drawings. Chair Easy (FD-20/17/229) (a) Rear leg

(b) Front leg

(c) Seat frame side rail

(d) Front rail

(e) Rear rail

(f) Top rail of back frame

(g) Bottom rail of back frame

(h) Arm rest

(j) Tightening of all part of chair easy with bamboo pins Note for Sl Item No.72 to 79 Unit rate quoted shall be deemed to inclide scraping the old polish after filling the cracks, joints and un even surfaces with wax and then polish two coats of french polish to complete item as shown in drgs and as specified and directed by Engineer-In - Charge.

Chair Writing (FD-20/202/280) (a) Rear leg

(b) Front leg

(c) Seat frame side rail

(d) front rail

(e) Rear rail

(f) Stiffner

(g) Arm rest

(h) Tightening of all parts of chair writing with bamboo pins Note for Item No 81 to 87 :- Unit rate quoted shall be deemed to inclide scrappig the old polish after filling the cracks, joints and un even surfaces with wax and then polish two coats of french polish to complete item as shown in drgs and as specified and directed by Engineer-In - Charge

Chair Dining/ Chair Dining (MAP) (FD-16/288/279, FD/E6/MAP/10) (a) Rear leg

(b) Front leg

(c) Seat frame side rail

(d) front rail

(e) Rear rail

(f) Stiffner

(g) Tightening of all parts of chair dining / chair CBB with bamboo pins Note for Sl Item No 89 to 94:- Unit rate quoted shall be deemed to inclide scrappig the old polish after filling the cracks, joints and un even surfaces with wax and then polish two coats of french polish to complete item as shown in drgs and as specified and directed by Engineer-In - Charge

Taking down unserviceable cane from following chairs of sorts and recaning with best first quality new plastic cane of 1.80mm for seat and 3.50mm for border as per Godrej pattern all as per drawings all as specified and as directed. (a) Chair Easy (FD-17/229)

(b) Chair writing (FD-20/202/280)

(c) Chair dining (FD 288/279)

Sofa Set FD-281/373 (a) Removal of unserviceable seat and back tapestry cloth and UNSV cushion of Sofa set 3 seater and S & F with new cushion 550mm x 530mm x100mm thick of 32 density with tapestry cloth of approved make/shade duly providing quality zip all as specified and shown in drawing and as directed by Engr-in-charge

(b) All as per item ser No 99 above but for sofa set 4 seater.

(c) All as per item ser No 99 above but for sofa set 5 seater.

Sofa Set FD-281/ 373/ 258 Removing the existing unserviceable parts of following sofa sets of sorts, supply and fix following new parts made of 1st class teak wood made to shape fixed in position complete all as directed and shown on drawings. (a) Rear leg

(b) Front leg

(c) Front rail of three seater

(d) Front rail of single seater

(e) Stiffner of three seater

(f) Stiffner of single seater

(g) Arm rest

(h) Ply wood 10 mm of three seater

(j) Ply wood 10 mm of single seater

Chair dining JCO's/OR (FD/MAP-II/05) Removing the existing unserviceable parts of following chairs of sorts, supply and fix following new parts made of first class hard wood (teak wood) made to shape fixed in position complete all as directed and shown on drawings. (a) Rear leg

(b) Front leg

(c) Seat frame side rail

(d) front rail

(e) Rear rail

(f) Stiffner

(g) Tightening of all parts of chair dining with bamboo pins Note for Sl Item No 111 to 116 :- Unit rate quoted shall be deemed to inclide scrappig the old polish after filling the cracks, joints and un even surfaces with wax and then polish two coats of french polish to complete item as shown in drgs and as specified and directed by Engineer-In - Charge

Chair dining JCO's/OR (FD/MAP-II/05) (a) Taking down unserviceable PVC Seat from chairs of sorts and refixing with best quality new PVC Seat 4mm thick with holes & screwed with rails as per drawings all as specified and as directed.

Chair Dining (FD/E6/MAP/10 (R)) Removing the existing unserviceable parts of following chairs of sorts, supply and fix following new parts made of first class hard wood (teak wood) made to shape fixed in position complete all as directed and shown on drawings. (a) Rear leg

(b) Front leg

(c) Seat frame side rail

(d) Front rail

(e) Rear rail

(f) Stiffner

(g) Tightening of all parts of chair dining with bamboo pins Note for Sl Item No 119 to 124 :- Unit rate quoted shall be deemed to inclide scrappig the old polish after filling the cracks, joints and un even surfaces with wax and then polish two coats of french polish to complete item as shown in drgs and as specified and directed by Engineer-In - Charge

Chair Dinning Officer FD/E6/ MAP/10(R) ; (a) Removal of existing unserviceable seat cushion with tapestry cloth of Chair Dining (MAP) and provision of new seat foam cushion 75mm thick of 32 density with tapestry cloth of approved make/shade fixed on 12mm thick commercial plywood all as per drawing and as directed by Engineer-in-Charge.

(b) Removal of existing unserviceable seat of tapestry cloth of Chair Dining (MAP) and provision of new tapestry cloth of approved make/shade fixed on existing 12mm thick commercial plywood all as per drawing and as directed by Engineer-in-Charge.

Chair Verandah (FD-19(M)/ 256/ 359) (a) Taking down unserviceable cane from chair verandah and re-caning with best quality new plastic cane of 3.50 mm/ 4 mm wide plastic cane as per Godrej pattern including applying one coat of white synthetic enamel paint of superior quality to chairs as per drawings all as specified and as directed by Engineer-in-Charge

Chair Verandah (FD/MAP-II/15,06) (b) Continuous welding 20mm dia MS tube at hand rest frame joint, seat frame joint, back frame joint and seat to back frame stiffener joint of chair verandah all as per drawing duly painting the affected portion with two coats of synthetic enamel paint(White) over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge

Table Bed Side FD-248/276: (a) Removal of existing unserviceable top and provision of new top made out of 18mm thick prelaminated particle board one side teak and other side balancing white fixed with 4mm thick teak wood edging alround all as per drawing and as directed by Engineer-in-charge.

(b) Removal of existing unserviceable side and provision of new side made out of 18mm thick prelaminated particle board one side teak and other side balancing white fixed with 4mm thick teak wood edging alround all as per drawing and as directed by Engineer-in-charge.

(c) Removal of existing unserviceable bottom and provision of new bottom made out of 18mm thick prelaminated particle board one side teak and other side balancing white fixed with 4mm thick teak wood edging alround including provision of 14" chromium plated steel channel of make : EBCO / Godrej or equivalent as approved , complete all as per drawing and as directed by Engineer-in-charge.

(d) Removal of existing unserviceable shelf and provision of new shelf made out of 12 mm thick prelaminated particle board one side teak and other side balancing white fixed with 4mm thick teak wood edging all as per drawing and as directed by Engineer-in-charge.

(e) Removal of existing unserviceable back plywood and provision of new plywood 6 mm thick BWR grade all as per drawing and as directed by Engineer-in-charge.

(f) Removal of existing unserviceable broken legs and provision of new legs of Ist class hard wood (teak wood) top 50mmx25mm bottom and 100mm hight all as per drawing and as directed by Engineer-in-charge.

Table Dressing Gents with Mirror : FD-31 , 230,379 (a) Removing the existing unserviceable broken mirror and S&F mew mirror of 5.5mm of thick size of 760x380mm complete all as specified and shown on drawings

(b) Removing the existing unserviceable frame of mirror and S&F new frame made out of 1st class teak wood and replace worn out of 6 mm thick plywood BWR grade back complete all as specified and shwon on drawings

(c) Removing the existing unserviceable table drawer and S&F new drawer made out of 12mm thick prelaminated particle board for front, 12mm thick 1st calss teak wood planks for sides and 6mm thick plywood for bottom complete all as specified and shown on drawings

(d) Removing the worn out plywood and S&F plywood BWR grade 6mm thick backing of table frame including tightening of loose components if any wooden screws complete as specified and directed Note:- Unit rate quoted for all the above items shall be deemed to include for connected minor reparis wherever necessary and one coat of french polishing the repaired Table dressing Gents with mirror.

Table Dressing Ladies with Mirror : FD-32/251/378 (a) Removing the existing unserviceable broken mirror and S&F new mirror 5.5mm of thick size 1220x365mm all as specified and shown on drawings

(b) Removing the existing unserviceable frame of mirror and S&F new 1st class teak wood frame of size 25x18 mm and replace the worn out ply wood with 6mm plywood BWR Grade complete all as specified and shown on drawings

(c) Removing the existing unserviceable top of table dressing ladies and S&F new top of table dressing ladies made out of 18mm thick prelaminated particle board with 4mm thick teak wood beading all round all as specified and shown on drawings.

(d) Removing the existing unserviceable drawer of table dressing ladies and replacing with new drawer complete all as specified and shown on drawings

(e) Removing the existing unserviceable sliding glass and replacing with new sliding glass complete all as specified and shown on drawings Note:- Unit rate quoted for all the above items shall be deemed to include for connected minor reparis wherever necessary and one coat of french polishing the repaired Table dressing Gents with mirror.

Hat stand with Mirror: FD-233 (a) Removing the existing unserviceable broken mirror and S&F new mirror 5.5mm of thick size 300mmx 440 mm all as specified and shown on drawings

(b) Removing the worn out plywood and S&F plywood BWR grade 6mm thick backing and 4mm teak face ply wood commercieal in front of hat stand frame including tightening of loose components if any wooden screws complete as specified and directed

(c) Removing the existing unserviceable aluminium pegs of size 120mmx75 mm and replacing with new Aluminium pegs of size 120mmx75 mmcomplete all as specified and shown on drawings

Preparation of wood and wood based surfaces after removing stains through sand papering and rectifying the cracks by filling with beewax, rawsin and chalk powder etc, mixed with polish and applying french polish to achieve uniform texture and glossy finish to the following furniture : FD-246 /FD-247 (a) Bed with plywood top

(b) Chair dining : FD-288/279

(c) Chair Easy : FD-17/229

(d) Chair writing : FD-20/202/280

(e) Hat stand with mirror : FD-233

(f) Peg Table : FD-277/384

(g) Table Bed side : FD-248/276

(j) Table 3' x 2' w/o drawer : FD-223

(k) Table centre : FD-274

(l) Table dining 6/8 pers : FD-239/273

(m) Table dressing gents with mirror : FD-31/230/379

(p) Teapoy FD-278/382

(s) Sofa set 5 seater : FD-281/373/ FD/ MAP-II/ 02

(t) Sofa set 4 seater : FD-281/373/ FD/ MAP-II/ 02

(u) Sofa set 3 seater : FD-281/373/ FD/ MAP-II/ 02

(v) Side board : FD-241/371

Mirror Dressing Gents: FD/E6/MAP/16 (a) Fixing of Mirror dressing gents (FD/E6/MAP/16) Nos 768 for Offrs & OR's Md Accn of Ganapathy Enclave for Offrs (70 x Offrs Md Accn) and Jitendra Biswas Colony (598 x OR's Md Accn) & New Domlur MAP Accn (100 x OR's Md Accn) under GE (Central) Bangalore at Mil Stn Bangalore. (The fixing mirror dressing gents properly on the wall, labour for fixing, drilling and carrying.

(b) Supply of nut & bolt of fastner with washer size of 150mm long 6mm dia to each dressing mirror for 04 Nos incl fixing only two Nos studs with four screw sutaible size bottom of the mirror dressing gents.

(c) Supply of MS Flat 150mm long 25mm width 3mm thick with key hole to be fixed on top of the dressing mirror including fixing with screw etc as required each mirror dressing two Nos.

Global Furnisherts (BID ID -3084612)

Ms GHOSH AND SONS (BID ID -3087402)

PRIYADARSHINI CONSTRUCTIONS (BID ID -3093944)

SARGAM ENTERPRISES (BID ID -3093261)

SHANMUGA TRADERS (BID ID -3080780)

Annu Enterprises (BID ID -3085464)

M/s National Traders (BID ID -3087297)