REPAIR TO BOUNDARY WALL, FENCING, DRAIN, CULVERT PATH AND MISC WORK UNDER AGE B/R-I AT GE JHANSI

Amount

Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks, old size brick, straight or curved on plan exc 6m mean radius built in cm (1:6), complete all as specified and directed.

M&L for half brick thick wall with fly ash bricks , old size brick, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:4, complete all as specified and directed.

Demolition of cement concrete incl terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, complete all as specified and directed.

M&L for 25mm th cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in flooring, complete all as specified and directed.

M&L for factory made PU coated, chequered cement concrete tiles of any colour 30 cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment, made of PVC moulded (or rubber mould) with vibrating system laid over 50 mm thick sand cushion, with and incl CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate

M & L for cement concrete type C2, 1:3:6 (40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for PCC (1:4:8) type D2 with 40 mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type BO using 12.50 mm graded stone aggregate as in Benching, Coping cills, steps; plinth courses, string courses, etc.complete all as specified.

Extra for forming fair finished surfaces of drain or channels, inner girth 30 cms, using extra cement including forms, moulds mitred/ stoppedends etc., complete.

Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of walls, complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of ceiling, complete all as specified and as directed.

M&L for preparation of old plastered surface and applying two coat of cement based paint , complete all as specified and directed.

M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection, path and hard standing etc laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Mild steel TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT 6 to 8mm mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil, complete all as specified and directed.

Removing of excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point, complete all as specified and directed.

Demolition and breaking up drain pipes of 150 mm internal dia size (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar including concrete bed, complete all as specified and directed.

M&L Reinforced concrete pipes 200mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L Reinforced concrete pipes 300mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L Reinforced concrete pipes 450mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed.

Cutting in to existing Man hole for conecting new drains , making good to pipe and renderig , cutting out exsiting benching for and forming branch chanel internal dia of pipe 150mm all as specified and adirected.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for drain pipes of 150 mm internal dia size, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel and drain etc complete all as specified and directed.

Supply only Glass dividing strips 3mm thick and 38mm wide fixed in floor complete all as directed

Dismantling posts or struts (wood,or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Excavation in post hole (similar hole) each not exceeding 0.5 Cum getting out, returning filling and ramming, complete all as specifide and directed.

M&L for mild steel angle and flat Iron for gate, posts and struts and straining bars in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specifide and directed.

Dismantling fencing wire any type complete all as specified and directed.

M&L for chain link fencing, of size 50 x 50mm and (overall dia of wire 4mm), fixed to any type of standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for galvanised iron, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75.0 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

M&L for precast cement concrete (1: 2: 4) type B-1 using 20 mm graded stone aggregate as in drain/manhole covers, with plain fair faces including chamfers, weathering throttling etc and set in cement mortar (1:4) complete with joint to match including necessary form works complete all as specified and directed.

M&L for Providing precast cement concrete louvres and jallies, type B0, 1:2:4 (using 12.5 mm graded agg) 45mm thick (measured solid), including all mouldings but excluding frame and set in cm 1:4 complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for RCC Nominal mix type B1 1:2:4 20mm gradded agg as in coloum incl neccesory form work complete all as specified and directed.

M/sDaljeet singh keer

Dubey Construction Company

M/S AADI TRADERS

A K ENTERPRISES

M/s Jagdish Chandra Arora

M/S Kesav Dev Agarwal

M/s JS Constructions

M/S RAJ CONSTRUCTION AND ELECTRICAL

S GOURAV PRAKASH ENTERPRISES

FTH Traders

Total Construction & Management Services

Soni Traders