Special Repair work of Type A 1 Government Collony Raebareli

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) All rate are excluding of GST.

12 mm cement plaster of mix : 1:6 ( 1 cement : 6 coarse sand) All rate are excluding of GST

12 mm cement plaster of mix : 1:4 ( 1 cement : 4 coarse sand) All rate are excluding of GST.

Cement plaster of mix : 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement 12 mm cement plaster. All rate are excluding of GST (DSR code 13.9.1)

Terrace repair providing and laying damp-proof course 40mm. Thick with cement 1:2:4 ( 1 cement : 2 coarse sand (Zone-III) including manufactured sand drived from recycle concrete aggregated (RCA) upto 25% : 4 graded stone aggregate 12.5 mm nominal size including (recycled concrete aggregate (RCA) upto 25%)). including cost of all material, labour and T&P etc. as directed by Engineer-in-charge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Wall painting with premium acrelic emulsion paint of interior grade having VOC content less than 50gm/litre of approved brand manufacture,including applying additional coats wherever required to achieve even shade and colour.for two coats

Finishing Walls with Premium Acrylic smooth Exterior Paint with Silicone additives of required shade; new work (two or more codes applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90/10sqm

Finishing walls with water proofing paint of required shade old work (one or more coats @2.20kg/10 sqm) complete. Including coast of all material, fitting, labour T&P etc. as directed by Engineer-in-charge. All rate are excluding of GST.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture ) with water absortion less than 0.08% and conforming to IS: 15622 ,of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 Coarse sand ) ,jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc,complete.Size of Tiles 600 x 600 mm

Providing and laying ceremic glazed floor tiles of size 300 x300 mm (thickness to be specified by the manufacture),of 1st quality conforming to IS :15622 ,of approved make ,in all colours,shades,except whitenlvory,grey, Fume Red Brown,laid on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand ) ,jointing with grey cement slurry @3.3 kg/sqm including pointing the joints with white cement and matching pigment etc,complete.

Painting with synthetic enamel paint of approved brand and manufacturer on or more cost on old work including cost of all material, fitting, labour T&P etc. as directed by Engineer-in-charge

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle section of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat pieces to the existing T-iron frame or to the wall with dash fasterner, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of Engineer-in-charge. All rate are excluding of GST.

Providing and fixing ISI marked flush door shutters confirming to IS : 2202 (Part I ) non-decoverative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Providing and fixing fly proof wire gauze to windows, clerestory windows & door with MS flat 15x3 mm and nuts & bolt complete. Galvanised MS wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. All rate are excluding of GST (DSR code 10.29.1)

Providing and fixing glass panes with putty and glazing clips in steel doors windows, clerestory windows, all complete with 4.0 mm thick glass panes including supply of all materials labour and tools and plants etc. requird for proper completion of the work. All rate are excluding of GST (DSR code 10.30.1)

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan with seat and lid ,10 litr low level white vitreous china flushing cistern &C.P. flush bend with fittings & C.I. brackets ,40 mm flush bend,overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete ,including painting of fitting and brackets,cutting and making good the walls and floors wherever required: W.C.pan with ISI markes white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets 15 mm C.P. brass piller taps ,32 mm C.P brass waste of standerd pattern ,including painting of fitting and brackets ,cutting and making good the walls wherever required : White vitreous china wash basin size 630 x 450 mm with a pair of 15 mm C.P. brass piller taps.

Providing and fixing 600 X 450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. :15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming IS:8931 15 mm nominal bore

Providing and fixing soil ,waste vent Pipe: 100mm dia Sand cast iron S&S pipe as per IS:1729

Providing and fixing Chlorinated Polyvinyl chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of engineer in charge. 100 mm nominal dia pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Please Enable Macros to View BoQ information