Sundarpahari Block Full Coverage Rural Water Supply Scheme,Under DW andS Division Godda on turnkey basis.

Amount

Part-A) Godda Block Full Coverage Rural Water Supply Scheme

WATER TREATMENT PLANT

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and necessary equipment for designing & construction of Conventional WTP of 22.00 MLD capacity. With all complete job. (Please refer to Section 5, Sl. 2.3 of SBD)

Electromagnetic Bulk Flow Meters Supply, install and commission Electro-magnetic Flow Meter (EMF) As Per ISO 4064, for Raw / Pure water with accuracy +/-0.5% of measured value & protection as per given specifications for size 100 mm-1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25 mtrs built in GSM (with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications.

350 mm dia

400 mm dia

Elevated Service Reservoir

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and equipment for designing & construction of ESR all complete job. (Please refer to Section 5,Sl. 2.8 of SBD)

Chilauna OHT Capacity 3,00,000 Litres, Staging height - 12 M

Ghat Dhamsay OHT Capacity 2,00,000 Litres, Staging height - 15 M

Nayachak - OHT Capacity 2,50,000 Litres, Staging height - 12 M

Chhota Kaliyani OHT Capacity 1,00,000 Litres, Staging height - 12 M

Badi Kaliyani OHT Capacity 75,000 Litres, Staging height - 17 M

Chinadhab OHT Capacity 2,50,000 Litres, Staging height - 20 M

Tarwara OHT Capacity 2,00,000 Litres, Staging height - 12 M

Rajpura OHT Capacity 2,00,000 Litres, Staging height - 16 M

Kasba Godda OHT Capacity 75,000 Litres, Staging height - 12 M

Karhariya Mal OHT Capacity 2,00,000 Litres, Staging height - 20 M

Markhan OHT Capacity 2,50,000 Litres, Staging height - 17 M

Ranidih OHT Capacity 2,00,000 Litres, Staging height - 22 M

Sarouni OHT Capacity 50,000 Litres, Staging height - 18 M

Barhauna OHT Capacity 2,00,000 Litres, Staging height - 12 M

Beldiha OHT Capacity 2,00,000 Litres, Staging height - 15 M

Lamhati Kar OHT Capacity 50,000 Litres, Staging height - 16 M

Pairdih OHT Capacity 2,00,000 Litres, Staging height - 15 M

Pandubathan OHT Capacity 2,00,000 Litres, Staging height - 23 M

Saidapur OHT Capacity 1,00,000 Litres, Staging height - 12 M

Dhodhari OHT Capacity 75,000 Litres, Staging height - 12 M

Nankhil OHT Capacity 1,50,000 Litres, Staging height - 19 M

Lohbandha OHT Capacity 2,50,000 Litres, Staging height - 16 M

Pakariya Mal OHT Capacity 75,000 Litres, Staging height - 19 M

Gangta OHT Capacity 50,000 Litres, Staging height - 12 M

Rampur - D OHT Capacity 50,000 Litres, Staging height - 12 M

Dumariya OHT Capacity 1,50,000 Litres, Staging height - 12 M

Bohoriya OHT Capacity 4,00,000 Litres, Staging height - 18 M

Parasi OHT Capacity 1,50,000 Litres, Staging height - 19 M

Galapahar Shampur OHT Capacity 4,00,000 Litres, Staging height - 19 M

Sarotiya OHT Capacity 3,00,000 Litres, Staging height - 24 M

Sarkanda OHT Capacity 1,50,000 Litres, Staging height - 12 M

Jamuni Paharpur OHT Capacity 2,50,000 Litres, Staging height - 16 M

Lachhmi OHT Capacity 2,50,000 Litres, Staging height - 24 M

Makhni OHT Capacity 2,50,000 Litres, Staging height - 24 M

Banka Ghat OHT Capacity 2,00,000 Litres, Staging height - 22 M

Sundarmor OHT Capacity 2,00,000 Litres, Staging height - 24 M

Baristanr OHT Capacity 25,000 Litres, Staging height - 16 M

Amarpur OHT Capacity 2,00,000 Litres, Staging height - 18 M

Kadwa OHT Capacity 2,50,000 Litres, Staging height - 20 M

Jhagarahi OHT Capacity 2,00,000 Litres, Staging height - 24 M

Karanpur OHT Capacity 75,000 Litres, Staging height - 12 M

Amjora OHT Capacity 2,00,000 Litres, Staging height - 24 M

Siarkatiya OHT Capacity 2,50,000 Litres, Staging height - 24 M

Lightning Arrestor

Lightening Arrester : Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5M long with a knob at end and with conical spike at top, aluminium tape conductor 20 x 3 mm size copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing & fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.

For Tape of 10M length

Sump cum Pump House (IPS - 1)

Part - A

Clear Water Sump

Designing (Aesthetically), and construct-ing RCC ground Service reservoir / RCC Sump in M- 300 Mix of required capacity including excavation in all type of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plasterwith Water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 m , all labour and material charges for laying and jointing of pipe assembly for inlet, outlet, washout, over flow and byepass arrangement consisting of CI / MS D/F. Pipes, Special and valves of given diameter, providing and fixing accessories such as MS ladder inside and outside, CI Manholes Frame and cover, At top slab, B.B Masonary chamber for all Valves, ventilating shafts, including giving satisfactory hydraullic testand water tightness test as per IS code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design Data, criteria, obligatory requirement and detailed Specification.

Clear Water Sump At Jamuni Paharpur (CWS- I). Capacity 1,00,000 Litres,

Part - B

Pump House

Column : Providing RCC-M 200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Beam : Providing R.C.C M-200 with nominal mixing of (1:1.5:3) in beam of all type with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Roof Slab : Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Lintel : Providing R.C.C. M - 200 with nominal mix of (1: 1.5 :3) in Lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I

Centering and shuttering

Window

Centering and shuttering

Corbel Beam : Providing RCC M200 with nominal mix (1:1.5:3) in corbel beam/all types of beam with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5-3 including shuttering, mixing and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Chhajja : Providing average 63 mm R.C.C. M - 200 with nominal mix of (1: 1.5 :3) in chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including making drip course in concrete,screening, cenrering, shuttering, and mixing cement concrete in mixer and placing in position, vibrating, striking, 6mm plaster(1:4) in ceiling and sides of chajja with sand of F.M. 1.5, curing (but excluding the cost of reinforcement) taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Window

Centering and shuttering

Reinforcement Bar : Providing Tor steel, reinforcement of 10 mm, 12 mm, 16 mm, dia bar as per approved design and drawing -do- do- TMT Bar Fe- 500 (only valid for SAIL, TATA Steel, JSPL, Electro Steel and Vizal Steel)

1.5 % of total concrete

Collapsible Gate : Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100 mm. Centres and braced with M.S. flat diagonals 20 x3 mm, with top and bottom rails of T. Iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangement, stopper, handles, including applying a primer coats of red lead paint, carriage, hoisting and taxes all complete as per building specification and direction E/I.

Chaukhat : Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood in chaukhat in and windows skylight and Fanlight and C/W celetial window opening, including wedge over all clamps complete including application of two coats of woods preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I.

Window : Supplying, fiiting and fixing 38 mm, thick good quality well dressed and well seasoned sal wood battened shutters, ledged and braced in doors and windows, with oxidised iron fitting such as hinges, sliding door, bolts, tower bolts, handles or rings, hooks and eyes cleats, sand block as per schedule. taxes and royality all complete as per building specification and direction of E/I.

Brick Masonary : Providing Designation 75 A brick work in CM (1:6) in Superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints, costs of screening, materials, scaffilding, raking out joints to 15 mm depth, curing, taxesand royality all complete as per building specification and direction of E/I.

Plaster : Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royality all complete as per building specification and direction of E/I.

Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading, unloading transportation are complete.

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 06 KM lead

Stone/Stone Chips 11 KM lead

Lightening Arrester : Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5M long with a knob at end and with conical spike at top, aluminium tape conductor 20 x 3 mm size copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing & fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.

For Tape of 10M length

Sump cum Pump House (IPS - 2)

Part - A

Clear Water Sump

Designing (Aesthetically), and construct-ing RCC ground Service reservoir / RCC Sump in M- 300 Mix of required capacity including excavation in all type of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plasterwith Water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 m , all labour and material charges for laying and jointing of pipe assembly for inlet, outlet, washout, over flow and byepass arrangement consisting of CI / MS D/F. Pipes, Special and valves of given diameter, providing and fixing accessories such as MS ladder inside and outside, CI Manholes Frame and cover, At top slab, B.B Masonary chamber for all Valves, ventilating shafts, including giving satisfactory hydraullic testand water tightness test as per IS code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design Data, criteria, obligatory requirement and detailed Specification.

Clear Water Sump At Makhni (CWS- II). Capacity 2,10,000 Litres,

Part - B

Pump House

Column : Providing RCC-M 200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Beam : Providing R.C.C M-200 with nominal mixing of (1:1.5:3) in beam of all type with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Roof Slab : Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Lintel : Providing R.C.C. M - 200 with nominal mix of (1: 1.5 :3) in Lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I

Centering and shuttering

Window

Centering and shuttering

Corbel Beam : Providing RCC M200 with nominal mix (1:1.5:3) in corbel beam/all types of beam with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5-3 including shuttering, mixing and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Chhajja : Providing average 63 mm R.C.C. M - 200 with nominal mix of (1: 1.5 :3) in chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including making drip course in concrete,screening, cenrering, shuttering, and mixing cement concrete in mixer and placing in position, vibrating, striking, 6mm plaster(1:4) in ceiling and sides of chajja with sand of F.M. 1.5, curing (but excluding the cost of reinforcement) taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Window

Centering and shuttering

Reinforcement Bar : Providing Tor steel, reinforcement of 10 mm, 12 mm, 16 mm, dia bar as per approved design and drawing -do- do- TMT Bar Fe- 500 (only valid for SAIL, TATA Steel, JSPL, Electro Steel and Vizal Steel)

1.5 % of total concrete

Collapsible Gate : Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100 mm. Centres and braced with M.S. flat diagonals 20 x3 mm, with top and bottom rails of T. Iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangement, stopper, handles, including applying a primer coats of red lead paint, carriage, hoisting and taxes all complete as per building specification and direction E/I.

Chaukhat : Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood in chaukhat in and windows skylight and Fanlight and C/W celetial window opening, including wedge over all clamps complete including application of two coats of woods preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I.

Window : Supplying, fiiting and fixing 38 mm, thick good quality well dressed and well seasoned sal wood battened shutters, ledged and braced in doors and windows, with oxidised iron fitting such as hinges, sliding door, bolts, tower bolts, handles or rings, hooks and eyes cleats, sand block as per schedule. taxes and royality all complete as per building specification and direction of E/I.

Brick Masonary : Providing Designation 75 A brick work in CM (1:6) in Superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints, costs of screening, materials, scaffilding, raking out joints to 15 mm depth, curing, taxesand royality all complete as per building specification and direction of E/I.

Plaster : Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royality all complete as per building specification and direction of E/I.

Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading, unloading transportation are complete.

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 06 KM lead

Stone/Stone Chips 11 KM lead

Lightening Arrester : Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5M long with a knob at end and with conical spike at top, aluminium tape conductor 20 x 3 mm size copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing & fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.

For Tape of 10M length

Sump cum Pump House (IPS - 3)

Part - A

Clear Water Sump

Designing (Aesthetically), and construct-ing RCC ground Service reservoir / RCC Sump in M- 300 Mix of required capacity including excavation in all type of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plasterwith Water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 m , all labour and material charges for laying and jointing of pipe assembly for inlet, outlet, washout, over flow and byepass arrangement consisting of CI / MS D/F. Pipes, Special and valves of given diameter, providing and fixing accessories such as MS ladder inside and outside, CI Manholes Frame and cover, At top slab, B.B Masonary chamber for all Valves, ventilating shafts, including giving satisfactory hydraullic testand water tightness test as per IS code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design Data, criteria, obligatory requirement and detailed Specification.

Clear Water Sump for Rajdaha/Rupiyamal Capacity 1,10,000 Litres,

Part - B

Pump House

Column : Providing RCC-M 200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Beam : Providing R.C.C M-200 with nominal mixing of (1:1.5:3) in beam of all type with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Roof Slab : Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Lintel : Providing R.C.C. M - 200 with nominal mix of (1: 1.5 :3) in Lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I

Centering and shuttering

Window

Centering and shuttering

Corbel Beam : Providing RCC M200 with nominal mix (1:1.5:3) in corbel beam/all types of beam with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5-3 including shuttering, mixing and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Chhajja : Providing average 63 mm R.C.C. M - 200 with nominal mix of (1: 1.5 :3) in chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including making drip course in concrete,screening, cenrering, shuttering, and mixing cement concrete in mixer and placing in position, vibrating, striking, 6mm plaster(1:4) in ceiling and sides of chajja with sand of F.M. 1.5, curing (but excluding the cost of reinforcement) taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Window

Centering and shuttering

Reinforcement Bar : Providing Tor steel, reinforcement of 10 mm, 12 mm, 16 mm, dia bar as per approved design and drawing -do- do- TMT Bar Fe- 500 (only valid for SAIL, TATA Steel, JSPL, Electro Steel and Vizal Steel)

1.5 % of total concrete

Collapsible Gate : Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100 mm. Centres and braced with M.S. flat diagonals 20 x3 mm, with top and bottom rails of T. Iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangement, stopper, handles, including applying a primer coats of red lead paint, carriage, hoisting and taxes all complete as per building specification and direction E/I.

Chaukhat : Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood in chaukhat in and windows skylight and Fanlight and C/W celetial window opening, including wedge over all clamps complete including application of two coats of woods preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I.

Window : Supplying, fiiting and fixing 38 mm, thick good quality well dressed and well seasoned sal wood battened shutters, ledged and braced in doors and windows, with oxidised iron fitting such as hinges, sliding door, bolts, tower bolts, handles or rings, hooks and eyes cleats, sand block as per schedule. taxes and royality all complete as per building specification and direction of E/I.

Brick Masonary : Providing Designation 75 A brick work in CM (1:6) in Superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints, costs of screening, materials, scaffilding, raking out joints to 15 mm depth, curing, taxesand royality all complete as per building specification and direction of E/I.

Plaster : Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royality all complete as per building specification and direction of E/I.

Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading, unloading transportation are complete.

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 06 KM lead

Stone/Stone Chips 11 KM lead

Lightening Arrester : Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5M long with a knob at end and with conical spike at top, aluminium tape conductor 20 x 3 mm size copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing & fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifi-cations laid down in relevent I.S. codes.

For Tape of 10M length

Sump cum Pump House (IPS - 4)

Part - A

Clear Water Sump

Designing (Aesthetically), and construct-ing RCC ground Service reservoir / RCC Sump in M- 300 Mix of required capacity including excavation in all type of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plasterwith Water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 m , all labour and material charges for laying and jointing of pipe assembly for inlet, outlet, washout, over flow and byepass arrangement consisting of CI / MS D/F. Pipes, Special and valves of given diameter, providing and fixing accessories such as MS ladder inside and outside, CI Manholes Frame and cover, At top slab, B.B Masonary chamber for all Valves, ventilating shafts, including giving satisfactory hydraullic testand water tightness test as per IS code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design Data, criteria, obligatory requirement and detailed Specification.

Clear Water Sump Pump House for Rupiyamal Capacity 1,20,000 Litres,

Part - B

Pump House

Column : Providing RCC-M 200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Beam : Providing R.C.C M-200 with nominal mixing of (1:1.5:3) in beam of all type with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Roof Slab : Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Lintel : Providing R.C.C. M - 200 with nominal mix of (1: 1.5 :3) in Lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including shuttering, screening, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I

Centering and shuttering

Window

Centering and shuttering

Corbel Beam : Providing RCC M200 with nominal mix (1:1.5:3) in corbel beam/all types of beam with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5-3 including shuttering, mixing and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Chhajja : Providing average 63 mm R.C.C. M - 200 with nominal mix of (1: 1.5 :3) in chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including making drip course in concrete,screening, cenrering, shuttering, and mixing cement concrete in mixer and placing in position, vibrating, striking, 6mm plaster(1:4) in ceiling and sides of chajja with sand of F.M. 1.5, curing (but excluding the cost of reinforcement) taxes and royality all complete, as per building specification and direction of E/I.

Centering and shuttering

Window

Centering and shuttering

Reinforcement Bar : Providing Tor steel, reinforcement of 10 mm, 12 mm, 16 mm, dia bar as per approved design and drawing -do- do- TMT Bar Fe- 500 (only valid for SAIL, TATA Steel, JSPL, Electro Steel and Vizal Steel)

1.5 % of total concrete

Collapsible Gate : Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100 mm. Centres and braced with M.S. flat diagonals 20 x3 mm, with top and bottom rails of T. Iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangement, stopper, handles, including applying a primer coats of red lead paint, carriage, hoisting and taxes all complete as per building specification and direction E/I.

Chaukhat : Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood in chaukhat in and windows skylight and Fanlight and C/W celetial window opening, including wedge over all clamps complete including application of two coats of woods preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I.

Window : Supplying, fiiting and fixing 38 mm, thick good quality well dressed and well seasoned sal wood battened shutters, ledged and braced in doors and windows, with oxidised iron fitting such as hinges, sliding door, bolts, tower bolts, handles or rings, hooks and eyes cleats, sand block as per schedule. taxes and royality all complete as per building specification and direction of E/I.

Brick Masonary : Providing Designation 75 A brick work in CM (1:6) in Superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints, costs of screening, materials, scaffilding, raking out joints to 15 mm depth, curing, taxesand royality all complete as per building specification and direction of E/I.

Plaster : Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royality all complete as per building specification and direction of E/I.

Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading, unloading transportation are complete.

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 06 KM lead

Stone/Stone Chips 11 KM lead

Lightening Arrester : Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5M long with a knob at end and with conical spike at top, aluminium tape conductor 20 x 3 mm size copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing & fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifi-cations laid down in relevent I.S. codes.

For Tape of 10M length

House Connection for 43107 nos. Consumer.

Earth work in excavation (as per I.S. 3114/ 1965 for laying of different types and sizes of pipes so as to give 1 m av. cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/l. (For soil item B)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l. (Mode of measurement complacted volume).

Provinding P.C.C M-150 with in norminal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including, screening, shuttering, mixing cement concrete in mixture and placing in position vibrating striking curing taxes and royality all complete as per building specifiaction and direction of E/I.

Centerring & Shuttering

Earth work in back fillingthe trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I. (For soil item A & B)

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and supplying blue MDPE pipes confirming to ISO 4427:1996 manufactured from vergin resin PE 80 food grade compounded raw material having blue colour only assurance certificate from quality agencies like WRC / CIPET ( India) / DVGM / KIWA / SPGN etc. for usage in drinking water with quality system. The cost shall including cost all taxes, inspection charges transprotaion to work site and earth work involved, all complete job as per specification and direction of E/I. 20 mm dia pipe.

Providing and supplying G.I. pipes (Tata and equivalent make) for usage in drinking water with quality system, The cost shall include testing of all materials all taxes central, State, Municipal, Inspection charges transportation up to site transite insurance, loading, unloading, stacking etc. complete as specified and directed.

Lowering laying and jointing HDPE / MDPE pipe in proper position including all specials by Compression fitting / Electrofusion and But fusion jointing procedure including hydraulic testing as er relevent IS Code complete with all materials for jointing procedure like Electro-fusion machine, Electric mirrior/ heater/But fusion welding machine with hydraulic testing and all labours as directed by engineer in charge as per IS-7634 part II

Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of E/l. (Pipe with socket to be supplied deparmentally free of cost).

Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dia ferrule weight not less than 425 gram

Providing and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/ (a) 20 mm dia and weight not less than 400 gram.

Providing and fixing 15 mm Dia male ended C.I Body Brass Spindle valve and seat bib cock of approved quality (Wt.not Less than 400 gms.) with extra socket all complete as per specification and Direction of E/I.

Supplying and fixing G.I. fittings of Approved make all complete as per specification and Direction of E/I

Elbow 20 mm

Elbow 15 mm

Reducing Socket 20 mm

Nipple 20 mm

Nipple 15 mm

Union Socket 20 mm

Socket 15mm

Socket 20 mm

Carriage of materials

Approach Road

Soil Excavation : Excavation in soil by manual means. (Excavation of roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 m) including Royalty @ RS30 per cum but excluding the cost of watering, rolling and compaction

Embankment : Construction of embankment with approved meterial obtained from borrow pits with a lift 1.5 M transporting to site spreading, grading to required slope and compacting to meet requirement of to tables 300.1 and 300.2 with a lead upto 1000 M as per technical specification 301.5.

(A) By mix in place method construction of granual sub base by providing well graded material, spreading in layer with mortar grade on prepared surface, mixing by mix in place method with rotavater at OMC, and compecting with smooth wheel roller to achiver the desired dencity, complete as per technical specification clouse 401,

Cement Concrete Pavement : Construction of un-reinforced dowel joints at expaction and construction joint only plain cement concrete pavement thickness as per design over a with shovels rakes compacted using prepared sub base with 43 grade cement or any other type as per clouse 1501.2.2 M-30 (grade) coarse not exceeding 25 mm mixed in concrete mixer of not less than 0.2 cum capacity and appropenate weigth bacher using approved mixed design laid in approved fixed side fromwork (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including leveling the fromwork as per drawing), spreading the concrete with shovels rankes compacted using needle seed and plate vibrators and finished in contaction and empanction contraction jointing appling debonding strips primer sealant dowel bars near approches to bridge/culvert and contraction joints admixtures as approved curring of concrete slabs for 14 days using curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clouse 1501

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weigth as per table-1300.1 no frament weighing less than 25 kg laid dry complete as per drawing and technical specification clouse 1301.

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete.

Cement 10 KM lead

Sand 36 KM lead

Stone/Stone Chips 11 KM lead

Boulders 11 KM lead

Twin Type Staff Quarter - 2 Unit (Please refer to Section 5, Sl. 2.7 of SBD)

E/W in Excavation in foundation trenches in ordinary soil (Vide classification of soil Item -A) & disposal of excavatd earth obtained to a distance up to 50 M including all lift leveling ramming the foundation trenches removing root of trees scrubs all complete as per approved design.

Providing, coarse clean sand in filling in foudation trenches /in Plinth including ramming & watering in layers not exceeding 150 mm thick with all leads lift including cost of all materilas, labour, royalty & taxes all complete as per building specification & direction of E/I

Providing designation 75 A one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I

Providing P.C.C M-100 in nominal mix of (1:3:6) in foundation with appoved quantity of stone metal (50 mm 25 mm dia size)graded & clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M. (1:6) in foundation 7 Plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including Providing 10 mm thick mortar joints, Cost of screening, materials, Scaffolding, raking out joints to 15 mm depth curing, taxes & royalty all complete as per building specification & direction of E/I

Providing 25 mm thick damp proof coarse with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to3 including screening, shuttering mixing cement concrete in mixer with 5% cico or any other approved water proffing compound and placing in position, vibrating, striing, curing, taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing10 mm thick motar joints, cost of screening, materials, scaffolding, raking out joints to 15 mm depth curing, taxes & royalty all complete as per building specification & direction of E/I

Providing R.C.C M-150 with nominal mix of (1:2:4) in lintel level with approved quality of stone chips 20 mm to 6mm size graded & clean coarse sand of F.M 2.5 to including screening , centring, shuttering and mixing cement concrete in mixer & placing in position vibrating striking curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building specification of (E/I.

Centering & Shuttering

Providing average 63 mm thick R.C.C M -150 with nominal mix (1:2:4) chajja in shelves with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M 2.5 to 3 including making drip course in concrete, screening, centering shuttering & mixing cement concrete in mixer & placing in position vibrating, striking, 6 mm cement plaster (1:4) in celling & sides of chajja with sand of F.M 1.5, Curing (But excluding the cost of reinforcement) taxes and royalty all complete as per building specification of E/I

Centering & Shuttering

Centering & Shuttering

Providing R.C.C M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size Graded & Clean coarse sand F.M 2.5 to including making drip course in cocrete, screening, concreting, shuttering, centring mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building Specification & direction of the E/I

Centering & Shuttering

Supplying fitting & fixing good quality, well dressed & well seasoned sal wood work in choukhat in doors, windows, skylights, fan light and C/W celestial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of E/I

Supplying fitting and fixing 250 x 20 x 6 mm L-type M.S Clamp properly fish tailed .including making holes and setting the same in 375 x 125 x 75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and diection of E/I @6 for each door & 4 for each window Total Quantity -(2x3x6+2x4x4)=68 nos

Supplying all materials, labours and fitting & fixing 38 mm (1.5) thick good quality seasoned sal wood battened shutter ledged & braced in door and windows with oxidized iron fitting such as hingles, sliding door bolts, tower bolts, handles or ings hooks and eye, cleats, sand block as per schedule, taxes & royalty all complete as per building specification & direction of Engineer -in- charge

Supplying, fittings & fixing M.S Gril made of 20 x 6 mm M.S flat as per approved design & drawing properly fabricated with joints continous filllet welded and finshed smooth, carriage of grill to work site hoisting as per the building specification and direction of E/I (where materials is not supplied by the Deptt.)

Providing 25 mm thick pre cast R.C.C M-150 with nominal mix of (1:2:4) in jali with approved quality to stone chips of 6mm nominal size and clean coarse sand of FM 2.5 to 3 with 1.6 mm thick M.S wire as per approved design and drawing and placing the same in position true to plumb and level and properly grouted with cement mortar (1:3) including cost of curing, Scaffolding and finishing all complete as per building specification and direction E/I

Providing and fixing fan hook of 16 mm dia M.S bar 1 meter long bent to reqired size and shape placed in position and fixing in R.C.C slab/beam at the time of casting all complete as per building specification of E/I where material is not supplied by cheet

Supplying, fitting and Fixing M.S Grill gate made of 20 x 6 mm M.S or 16 mm M.S raurbar Flat fitted on 25 mm x 25 mm x 6mm M.S angle frame of size 60 x 60 x 6 as per approved design including cost of fabrication & drawing, properly fabricated with joints continuous fillet welded & finished smooth, providing necessary locking arrangements with Haskell & dummy duly fixed in C.C (1:2:4) blocks of reuired size applying a priming red lead paints over steel works, taxes , carriage of grill to work site, as per the building specification & direction of E/I (where materials is not supplied by the Dept)

Providing 6 mm thick cement plaster (1:4) in celling with approved quality of clean coarse sand of F.M 1.5 including screening, curing with all leads & lifts of water, scaffolding, taxes & royalty all complete as per building specification & direction of E/I

Providing 12 mm thick cement plaster (1:6) with approved quality of clean coarse sand of F.M 1.5 including screening Curing with all leads & lifts of water, Scaffolding, taxes 7 royalty all complete as per building specification & direction of E/I.

Providing cement 1:3 (12mm ) plaster with cement mortar (1:3) using clean coarse sand finishing with neat punning a dado 6" (150 mm) high a side room and out side wall upto plinth level includng screening, curing with all leads & lifts of water, scaffolding, taxes and royalty all complete as per building specification & direction of E/I

Filling in foudation trenches & Plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I (Mode of measurement compacted volume)

Providing average 150 mm thick dry rammed khoa beaten to 112 mm. (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing & carriage of water with all leads, making proper slope & blending the top with cement mortar (1:10) all complete as per building specification & direction of E/I.

Providing 25 mm thick . First class patent stone flooring (1:2:4) with stone chips in two layers ,bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in pannels including cost of curing , finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I

Providing designation 75 A one brick on edge flooring in C.M (1:4) with top surface flush pointed in CM (1:4) approved quality of clean coarse sand of F.M 2 to 2.5 including the cost of screening ,raking out joints to 15 mm depth, curing taxes, royalty all complete as per building specification and direction (E/I)

White washing three coat over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I

Providing all materials,labours & doing 2 (two) Coat colour washing over a coat of white washing over new surface with approved quality of lime & Colour over the new surface including the cost of clening surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I

Providing two coats of painting with readymix paint synthetic enamel paint over a coat of primer of approved shad and make over new wooden surface after cleaning, removing dirt scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaning the surface thouroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Providing 2(two) coats of Paniting with ready mixed paints of approved shade & make over steel surafce including cleaning the surface thouroughly, scaffolding & taxes all complete as per building specification & direction of E/I

Providing 10 mm (TMT) Fe 500 TOR for steel reinforced as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire with cost of wore removal of rust placing the rods in position all complete as per building specification and direction of E/I

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 06 KM lead

Stone/Stone Chips 11 KM lead

Water Supply Sanitation Installation (Plumbing work)

Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I.

i) 25mm GI. Pipe.

ii) 15 mm GI. Pipe.

Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I.

i) 15 mm GI. Pipe

Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I.

Supplying and fixing GI fittings of approved make all complete as per direction of E/I.

(a) Elbow 15 mm dia

(b) Tee plane 15mm dia

(c) Nipple 15mm dia.

(d) Union Socket 25mm dia

(e) Union Socket 15mm dia

(f) Brass bib cock 15mm dia

(g) C.I stop cock 15mm dia

(h) C.I. stop cock 25mm dia

(i) Reducing Socket 25x15mm

(j) Tee 25x25x15mm dia

Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stop cock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (510mm.long with 12.5 Liter low level PVC System).

SEPTIC TANK and SOAK PIT

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.

Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I.

Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mm to 6mm size well graded and clean course sand of FM-2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and directions of E/I.

(a) 19 mm thick

(b) 12 mm thick

Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I.

(a) B/W in C.M (1:4)

(b) B/W 75-B in (1:6) for Soak pit

(c) Brick work in dry masonry for soak pit.

Providing pre cast R.C.C. M-150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I.

Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.

10 mm dia

Supplying fitting and fixing H.C.I. Pipe/ H.C.I. fitting of Approved make confirming to I.S.S 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.

(a) 100mm dia H.C.I. Tee.

(b) 100mm dia H.C.I. Band

(c) 50mm dia H.C.I. Cowel

(d) 50mm dia H.C.I. Vent pipe

(e) 100mm H.C.I. Pipe

Supplying materials and labours and fixing 20mm dia M.S bar steps in wall of 0.3 m interval and staggered in (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.

Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete.

Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I.

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. Cover With frame (Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I

Carriages of materials

(a) Brick – 06 KM lead

(b) Sand - 36 KM lead

(c) Stone chips - 11 KM lead

(d) Steel - 10 KM lead

(d) Cement- 10 KM lead

Electrical Works

Point wiring in PVC conduit with modular type switch wiring for light point /fan point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for twin control light point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with two way modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for light /power plug point with 2 x 4 sqmm F.R.PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with one no 4 sqmm FR PVC insulated copper conductor single core cable for loop earthing etc as required.

Copper sub main wiring in PVC conduit Wiring for sub main wiring with PVC insulated copper conductor single core in surface/recessed PVC conduit as required.

2 x 1.5 sqmm + 1 x 1.5 sqmm earth wiring

2 x 2.5 sqmm + 1 x 2.5 sqmm earth wiring

Supplying and fixing following way three pole and neutral sheet MCB distribution board 415 volts on surface/recessed complete with tinned copper bush bars, neutral link, earth bar, din bar, detachable gland plate inter connection phosphatised and power painted including earthing etc as required (but with out mcb/rccb/Isolator) (4+12) double door horizontal type.

Supplying and fixing 5 amp to 32 amp, rating 240 volts, B series miniature circuit breaker of single poles in existing MCB DB complete with connecting, testing, and commissioning etc as required

Earthing with G.I. earth pipe 4.5 M long 40mm dia including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe etc with charcoal, salt all complete as per electrical rule

Supplying ,fitting and fixing following sizes of PVC conduct along with accessories in surface / races including cutting the wall and making good the same in case of recessed conduit as required

PVC con 20 mm PVC pipe

PVC con 25 mm PVC pipe

Installation commissioning and testing Ceiling Fan

Carriage of ceiling fan and regulator

Supplying, fitting and fixing 5 amp ceiling rose on the existing junction

Supplying, fitting and fixing breas batten/ angle holder including connection etc.

Supplying, fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 3 pin 5/6 amp modular type switch, connection, painting etc as required.

Supplying, fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 6 pin 5/6 amp and 15/16 amp socket outlet and 15/16 amp modular type switch, connection, painting etc as required.

Supplying and drawing co-axial T.V. cable RG-06 grade 0.7 nn solid copper conductor PE insulated seilded with fine tinned cover braid and protected with PVC sheath in the existing surface / recessed steel/ PVC conduit as required.

Supplying and fixing modular switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc,as required. TV antenna socket out put

Supplying, fitting and fixing modular base and cover plate on existing modular metal boxes etc as required.

Cost of Earthing with G.I. earth pipe 4.5 M long 40mm dia G.I.Pipe 600 mm x 600 mm x 6 mm thick copper earth plate and 8 SWG copper wire including cost of making 1.2 x 1.2 x 3m deep pit and filling with charcoal, salt all complete as per electrical rule

Compound Wall/ Boundry Wall for WTP. (6158.00 M Long)

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of Compound wall. etc. all complete job. (Please refer to Section 5,Sl. 2.9 of SBD)

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20 mm to 6 mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in stiffeners with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Centering & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Centering & Shuttering

Providing designation 75 A brick work in CM (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification & direction of E/I. Qnty. Same as Item no.13

Providing Tor steel reinforcement of 10 mm,12 mm, &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site, cutting, bending and binding with annealed wire with cost of wire ,removal of rust, Placing the rods in position all complete as per building specification and direction of E/I.

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I.

Carriage of materials from divisional store or kiln site or quarry site to work site including contractor's profit, loading, unloading, transportation etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Stone/Stone Chips 11 KM lead

Bricks 06 KM lead

Gate - 45 nos.

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Centering & Shuttering

Providing Tor steel reinforcement of 10 mm, 12 mm & 16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site, cutting ,bending and binding with annealed wire with cost of wire, removal of rust, Placing the rods in position all complete as per building specification and direction of E/I.

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I.

Supplying fitting & Fixing M.S. grill gate with M.S. grills made 20x6mm M.S. flat or 16mm M.S. square bars fitted 25 x 25 x 6 mm M.S. angle frame of size 60 x 60 x 6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface

Carriage of materials from divisional store or kiln site or quarry site to work site including contractor's profit, loading, unloading, transportation etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Stone/Stone Chips 11 KM lead

Bricks 06 KM lead

Electro-Mechanical Equipment at WTP (Chilona)

Centrifugal Pumps:- Providing, suppplying and commissioning of Horizontal Split Casing Centrifugal Pump sets of Kirloskar / M&P / WPIL/Jyoti make having below mentioned discharged and head with suitable capacity of squirrel cage induction motor (IE3) of Kirloskar / CG / BHEL / ABB / Marathon etc make operated on 415V +/- 10%, 3 Ph, 50 Hz AC supply having speed 1460 rpm, including cost of supplying fitting and fixing of all required accessories such as CI D/F Sluice Valves, NRV, Pressure Guage, Stainer, MS Channel & Base Plate etc as required with suitable fully automatic star delta starter of L&T/ Schneider / ABB, etc. all complete.

Raw Water Feeder Main - RWFM Discharge = 126.26 LPS Head = 12 m (2 Working & 2 Standby)

Clear Water Feeder Main - CWFM-I Discharge = 36.74 LPS Head = 92 m (2 Working & 2 Standby)

Clear Water Feeder Main -CWFM-2A Discharge = 39.84 LPS Head = 80 m (2 Working & 2 Standby)

Clear Water Feeder Main - CWFM-3 Discharge = 49.68 LPS Head = 96 m (2 Working & 2 Standby)

Distribution Panel:- Providing, suppplying and commissioning of Power controled cum distribution cubical panel board, made of 2 or 3 mm thick MS sheet of suitable size, dust and vermin proof consisting of following accessories.

1) Incoming Feeder - 4 Pole, ACB (Range 1250A - 1600A) with suitable adjustable thermal release and having braking capacity of 415V, 50 KA - 1 No

2 ) Outgoing Feeder - 3 Pole, MCCB DN2-250M (Range 200A - 250A) with suitable adjustable thermal release and having braking capacity of 415V, 35 KA - 10 No

3 ) Outgoing Feeder - 3 Pole, MCCB DN2-250M (Range 250A - 315A) with suitable adjustable thermal release and having braking capacity of 415V, 35 KA - 5 No

4 ) Outgoing Feeder - 3 Pole, MCCB DN2-250M (Range 250A - 315A) with suitable adjustable thermal release and having braking capacity of 415V, 35 KA - 2 No

5) Copper Bus Bar - 4 Pole suitable current raiting 1600A - 1 No

6) Voltmeter- Range 0-500 volt - 1 No

7) Ammeter- - 4 Nos

8) Phase Indicating Lamp - 3 Nos

9) 63 A MCB Lightenigng Load - 4 No

10) All type of safety & protection relays like motor control relays, earth fault relay, over/leakage current relay, measuring & indicating meters, Suitable capacitor banks, etc.

11) Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and including internally wired & connected with suitable size of copper control wire/cable, etc. all complete.

Raw Water P/S Panel :- Providing, suppplying and commissioning of Power controled cum distribution cubical panel board, made of 2 or 3 mm thick MS sheet of suitable size, dust and vermin proof consisting of following accessories.

1) Incoming Feeder - 3 Pole, MCCB DN0-100SD (Range 200A - 250A) with suitable adjustable thermal release and having braking capacity of 415V, 50 KA - 1 No

2 ) Outgoing Feeder - 3 Pole, MCCB DN2-250M (Range 80A - 100A) with suitable adjustable thermal release and having braking capacity of 415V, 35 KA - 10 No. (2 Nos. for Raw Water Pump Sets)

3) Copper Bus Bar - 4 Pole suitable current raiting 200A - 1 No

4) Voltmeter- Range 0-500 volt - 1 No

5) Ammeter- - 4 Nos

6) Phase Indicating Lamp - 3 Nos

7) 63 A MCB Lightenigng Load - 2 No

8) All type of safety & protection relays like motor control relays, earth fault relay, over/leakage current relay, measuring & indicating meters, Suitable capacitor banks, etc.

9) Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and including internally wired & connected with suitable size of copper control wire/cable, etc. all complete.

Cable:- (Transformer to CW Panel ) Providing, erecting and giving test and trial for power wiring with 400 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables XLPE/PVC insulated armoured cable of suitable runs from Transformer to Panel including laying, jointing and making proper terminations, etc. all complete.

Cable:- (CW Panel to RW Panel ) Providing, erecting and giving test and trial for power wiring with 120 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables XLPE/PVC insulated armoured cable of suitable runs from Transformer to Panel including laying, jointing and making proper terminations, etc. all complete.

Cable:-(CW Distribution Panel to Starter to Motor) Providing, erecting and giving test and trial for power wiring with required 50 Sq mm 3 core 1.1KV grade Unarmoured Copper cables from Panel to Motors & Staters, including laying, jointing and making proper terminations, etc. all complete. (for CWFM-1)

Cable:- (CW Distribution Panel to Starter to Motor) Providing, erecting and giving test and trial for power wiring with required 70 Sq mm 3 core 1.1KV grade Unarmoured Copper cables from Panel to Motors & Staters, including laying, jointing and making proper terminations, etc. all complete. (for CWFM-3)

Cable:- (RW P/S Panel to Starter to Motor) Providing, erecting and giving test and trial for power wiring with required 16 Sq mm 3 core 1.1KV grade Unarmoured Copper cables from Panel to Motors & Staters, including laying, jointing and making proper terminations, etc. all complete. (for RWFM)

Earthing:- Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long with a knob at end and with conical spike at top, copper tape conductor 20 x 3 mm size, copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing and fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.

Hand Operated Circular or Rectangular Travelling Crane ( Single Girder) : Providing , erecting and commissioning 3 Ton Single Girder Hand Operated Circular / Rectangular Travelling Crane with 6 m lift complete with chain pulley block ISI marked and travelling trolley both tested for 50 % overload including arrangement for longitudinal travel / circular travel and cross travel with wheel, hand chain, etc complete.

Tansformer Installation: Cost of construction of DP structure in Rail/RSJ Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. for power supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.

Lightening Arrester for WTP : Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5M long with a knob at end and with conical spike at top, aluminium tape conductor 20 x 3 mm size copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing & fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.

Lighting: Providing, erecting and giving test and trial of internal and external lighting with LED fittings, wiring, power points, MCBs, distribution box, indicators, as per IE rules, etc. all complete.

Miscellaneous Items:- Providing, erecting and giving test and trial of Fire extinguisher, First aid box, gloves & shoes, emergency light, tools & tackles, etc. as per instruction of E/I.

Electro-Mechanical Equipment at IPS - I (Jamuni Paharpur)

Centrifugal Pumps:- Providing, suppplying and commissioning of Horizontal Split Casing Centrifugal Pumpsets of Kirloskar / M&P / WPIL/ Jyoti make having below mentioned discharged and head with suitable capacity of squirrel cage induction motor (IE3) of Kirloskar/CG /BHEL/ ABB/Marathon etc make operated on 415V +/- 10%, 3 Ph, 50 Hz AC supply having speed 1460 rpm, including cost of supplying fitting and fixing of all required accessories such as CI D/F Sluice Valves, NRV, Pressure Guage, Stainer, MS Channel & Base Plate etc as required with suitable fully automatic star delta starter of L&T/ Schneider / ABB, etc. all complete.

Clear Water Feeder Main - CWFM-4 Discharge = 12.75 LPS Head = 85 m (1 Working & 1 Standby)

Distribution Panel:- Providing, suppplying and commissioning of Power controled cum distribution cubical panel board, made of 2 or 3 mm thick MS sheet of suitable size, dust and vermin proof consisting of following accessories.

1) Incoming Feeder - 3 Pole, MCCB DN0-100SD (Range 200A - 250A) with suitable adjustable thermal release and having braking capacity of 415V, 50 KA - 1 No

2 ) Outgoing Feeder - 3 Pole, MCCB DN0-100SD (Range 63A - 100A) with suitable adjustable thermal release and having braking capacity of 415V, 35 KA - 4 No

3) Copper Bus Bar - 4 Pole suitable current raiting 250A - 1 No

4) Voltmeter- Range 0-500 volt - 1 No

5) Ammeter- Range 0 - 300 A - 4 Nos

6) Phase Indicating Lamp - 3 Nos

7) 63 A MCB Lightenigng Load - 1 No

8) All type of safety & protection relays like motor control relays, earth fault relay, over/ leakage current relay, measuring & indicating meters, Suitable capacitor banks, etc.

9) Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and including internally wired & connected with suitable size of copper control wire/cable, etc. all complete.

Cable:- (Transformer to Distribution Panel) Providing, erecting and giving test and trial for power wiring with 120 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables XLPE/PVC insulated armoured cable from Transformer to Panel including laying, jointing and making proper terminations, etc. all complete.

Cable:- (Distribution Panel to Sarter to Motor) Providing, erecting and giving test and trial for power wiring with required 16 Sq mm 3 core 1.1KV grade Unarmoured Copper cables from Panel to Motors & Staters, including laying, jointing and making proper terminations, etc. all complete.

Earthing:- Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long with a knob at end and with conical spike at top, copper tape conductor 20 x 3 mm size, copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing and fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.

Chain Pulley Block : Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark with Travelling Trolley.

Tansformer Installation: Cost of construction of DP structure in Rail/RSJ Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. for power supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.

Lighting: Providing, erecting and giving test and trial of internal and external lighting with LED fittings, wiring, power points, MCBs, distribution box, indicators, as per IE rules, etc. all complete.

Miscellaneous Items:- Providing, erecting and giving test and trial of Fire extinguisher, First aid box, gloves & shoes, emergency light, tools & tackles, etc. as per instruction of E/I.

Electro-Mechanical Equipment at IPS -II (Makhani)

A - For Clear Water Feeder Main V ( CWFM - V)

Centrifugal Pumps:- Providing, suppplying and commissioning of Horizontal Split Casing Centrifugal Pumpsets of Kirloskar / M&P/WPIL/Jyoti make having below mentioned discharged and head with suitable capacity of squirrel cage induction motor (IE3) of Kirloskar/CG /BHEL/ABB/Marathon etc make operated on 415V +/- 10%, 3 Ph, 50 Hz AC supply having speed 1460 rpm, including cost of supplying fitting and fixing of all required accessories such as CI D/F Sluice Valves, NRV, Pressure Guage, Stainer, MS Channel & Base Plate etc as required with suitable fully automatic star delta starter of L&T/ Schneider / ABB, etc. all complete.

Clear Water Feeder Main - CWFM-5 Discharge = 5.56 LPS Head = 61 m (1 Working & 1 Standby)

Distribution Panel:- Providing, supppling and commissioning of Power controled cum distribution cubical panel board, made of 2 or 3 mm thick MS sheet of suitable size, dust and vermin proof consisting of following accessories.

1) Incoming Feeder - 3 Pole, MCCB DN0-100SD (Range 400A - 500A) with suitable adjustable thermal release and having braking capacity of 415V, 50 KA - 1 No

2 ) Outgoing Feeder - 3 Pole, MCCB DN0-100SD (Range 32A - 100A) with suitable adjustable thermal release and having braking capacity of 415V, 35 KA - 4 No

3) Copper Bus Bar - 4 Pole suitable current raiting 500A - 1 No

4) Voltmeter- Range 0-500 volt - 1 No

5) Ammeter- Range 0 - 300 A - 4 Nos

6) Phase Indicating Lamp - 3 Nos

7) 63 A MCB Lightenigng Load - 1 No

8) All type of safety & protection relays like motor control relays, earth fault relay, over/leakage current relay, measuring & indicating meters, suitable capacitor banks, etc.

9) Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and including internally wired & connected with suitable size of copper control wire/cable, etc. all complete.

Cable:- (Transformer to Distribution Panel) Providing, erecting and giving test and trial for power wiring with 240 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables XLPE/PVC insulated armoured cable from Transformer to Panel including laying, jointing and making proper terminations, etc. all complete.

Cable:- (Distribution Panel to Starter to Motor) Providing, erecting and giving test and trial for power wiring with required 6 Sq mm 3 core 1.1KV grade Unarmoured Copper cables from Panel to Motors & Staters, including laying, jointing and making proper terminations, etc. all complete.

Earthing:- Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long with a knob at end and with conical spike at top, copper tape conductor 20 x 3 mm size, copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing and fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.

B - For Clear Water Feeder Main VI ( CWFM - VI)

Centrifugal Pumps:- Providing, suppplying and commissioning of Horizontal Split Casing Centrifugal Pumpsets of Kirloskar/ M&P/WPIL/Jyoti make having below mentioned discharged and head with suitable capacity of squirrel cage induction motor of Kirloskar/CG/BHEL /ABB/Marathon etc make operated on 415V +/- 10%, 3 Ph, 50 Hz AC supply having speed 1460 rpm, including cost of supplying fitting and fixing of all required accessories such as CI D/F Sluice Valves, NRV, Pressure Guage, Stainer, MS Channel & Base Plate etc as required with suitable fully automatic star delta starter of L&T/ Schneider / ABB, etc. all complete.

Clear Water Feeder Main - CWFM-6 Discharge = 28.66 LPS Head = 105 m (1 Working & 1 Standby)

Distribution Panel:- Providing, supppling and commissioning of Power controled cum distribution cubical panel board, made of 2 or 3 mm thick MS sheet of suitable size, dust and vermin proof consisting of following accessories.

1) Incoming Feeder - 3 Pole, MCCB DN3-630M (Range 400A - 500A) with suitable adjustable thermal release and having braking capacity of 415V, 50 KA - 1 No

2 ) Outgoing Feeder - 3 Pole, MCCB DN2-250M (Range 200A - 250A) with suitable adjustable thermal release and having braking capacity of 415V, 35 KA - 4 No

3) Copper Bus Bar - 4 Pole suitable current raiting 500A - 1 No

4) Voltmeter- Range 0-500 volt - 1 No

5) Ammeter- Range 0 - 300 A - 4 Nos

6) Phase Indicating Lamp - 3 Nos

7) 63 A MCB Lightenigng Load - 1 No

8) All type of safety & protection relays like motor control relays, earth fault relay, over/leakage current relay, measuring & indicating meters, Suitable capacitor banks, etc.

9) Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and including internally wired & connected with suitable size of copper control wire/cable, etc. all complete.

Cable:- (Transformer to Distribution Panel) Providing, erecting and giving test and trial for power wiring with 240 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables XLPE/PVC insulated armoured cable from Transformer to Panel including laying, jointing and making proper terminations, etc. all complete.

Cable:- (Distribution Panel to Starter to Motor) Providing, erecting and giving test and trial for power wiring with required 50 Sq mm 3 core 1.1KV grade Unarmoured Copper cables from Panel to Motors & Staters, including laying, jointing and making proper terminations, etc. all complete.

Earthing:- Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long with a knob at end and with conical spike at top, copper tape conductor 20 x 3 mm size, copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing and fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.

Chain Pulley Block : Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark with Travelling Trolley.

Tansformer Installation: Cost of construction of DP structure in Rail/RSJ Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. for power supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.

Lighting: Providing, erecting and giving test and trial of internal and external lighting with LED fittings, wiring, power points, MCBs, distribution box, indicators, as per IE rules, etc. all complete.

Miscellaneous Items:- Providing, erecting and giving test and trial of Fire extinguisher, First aid box, gloves & shoes, emergency light, tools & tackles, etc. as per instruction of E/I.

Electro-Mechanical Equipment at IPS-III (Rajdaha)

A -For Clear Water Feeder Main VII ( CWFM - VII)

Centrifugal Pumps:- Providing, suppplying and commissioning of Horizontal Split Casing Centrifugal Pumpsets of Kirloskar/M&P/ WPIL/Jyoti make having below mentioned discharged and head with suitable capacity of squirrel cage induction motor (IE3) of Kirloskar/CG /BHEL/ABB/Marathon etc make operated on 415V +/- 10%, 3 Ph, 50 Hz AC supply having speed 1460 rpm, including cost of supplying fitting and fixing of all required accessories such as CI D/F Sluice Valves, NRV, Pressure Guage, Stainer, MS Channel & Base Plate etc as required with suitable fully automatic star delta starter of L&T/ Schneider / ABB, etc. all complete.

Clear Water Feeder Main - CWFM-7 Discharge = 15.28 LPS Head = 101 m (1 Working & 1 Standby)

Distribution Panel:- Providing, suppplying and commissioning of Power controled cum distribution cubical panel board, made of 2 or 3 mm thick MS sheet of suitable size, dust and vermin proof consisting of following accessories.

1) Incoming Feeder - 3 Pole, MCCB DN1-160 M (Range 200A - 250A) with suitable adjustable thermal release and having braking capacity of 415V, 50 KA - 1 No

2 ) Outgoing Feeder - 3 Pole, MCCB DN1-160M (Range 100A - 160A) with suitable adjustable thermal release and having braking capacity of 415V, 35 KA - 4 No

3) Copper Bus Bar - 4 Pole suitable current raiting 250A - 1 No

4) Voltmeter- Range 0-500 volt - 1 No

5) Ammeter- Range 0 - 300 A - 4 Nos

6) Phase Indicating Lamp - 3 Nos

7) 63 A MCB Lightenigng Load - 1 No

8) All type of safety & protection relays like motor control relays, earth fault relay, over/leakage current relay, measuring & indicating meters, Suitable capacitor banks, etc.

9) Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and including internally wired & connected with suitable size of copper control wire/cable, etc. all complete.

Cable:- (Transformer to Distribution Panel) Providing, erecting and giving test and trial for power wiring with 120 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables XLPE/PVC insulated armoured cable from Transformer to Panel including laying, jointing and making proper terminations, etc. all complete.

Cable:- (Distribution Panel to Starter to Motor) Providing, erecting and giving test and trial for power wiring with required 25 Sq mm 3 core 1.1 KV grade Unarmoured Copper cables from Panel to Motors & Staters, including laying, jointing and making proper terminations, etc. all complete.

Earthing:- Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long with a knob at end and with conical spike at top, copper tape conductor 20 x 3 mm size, copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing and fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.

Chain Pulley Block : Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark with Travelling Trolley.

Tansformer Installation: Cost of construction of DP structure in Rail/RSJ Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. for power supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.

Lighting: Providing, erecting and giving test and trial of internal and external lighting with LED fittings, wiring, power points, MCBs, distribution box, indicators, as per IE rules, etc. all complete.

Miscellaneous Items:- Providing, erecting and giving test and trial of Fire extinguisher, First aid box, gloves & shoes, emergency light, tools & tackles, etc. as per instruction of E/I.

Electro - Mechanical Equipment at IPS - IV (Rupiyamal)

A - For Clear Water Feeder Main IIB ( CWFM - IIB)

Centrifugal Pumps:- Providing, suppplying and commissioning of Horizontal Split Casing Centrifugal Pumpsets of Kirloskar/M&P/WPIL/Jyoti make having below mentioned discharged and head with suitable capacity of squirrel cage induction motor (IE3) of Kirloskar/CG /BHEL/ABB/Marathon etc make operated on 415V +/- 10%, 3 Ph, 50 Hz AC supply having speed 1460 rpm, including cost of supplying fitting and fixing of all required accessories such as CI D/F Sluice Valves, NRV, Pressure Guage, Stainer, MS Channel & Base Plate etc as required with suitable fully automatic star delta starter of L&T/ Schneider / ABB, etc. all complete.

Clear Water Feeder Main - CWFM-2B Discharge = 15.28 LPS Head = 85 m (1 Working & 1 Standby)

Distribution Panel:- Providing, supppling and commissioning of Power controled cum distribution cubical panel board, made of 2 or 3 mm thick MS sheet of suitable size, dust and vermin proof consisting of following accessories.

1) Incoming Feeder - 3 Pole, MCCB DN1-160M (Range 200A - 250A) with suitable adjustable thermal release and having braking capacity of 415V, 50 KA - 1 No

2 ) Outgoing Feeder - 3 Pole, MCCB DN1-160M (Range 80A - 100A) with suitable adjustable thermal release and having braking capacity of 415V, 35 KA - 4 No

3) Copper Bus Bar - 4 Pole suitable current raiting 250A - 1 No

4) Voltmeter- Range 0-500 volt - 1 No

5) Ammeter- Range 0 - 300 A - 4 Nos

6) Phase Indicating Lamp - 3 Nos

7) 63 A MCB Lightenigng Load - 1 No

8) All type of safety & protection relays like motor control relays, earth fault relay, over/leakage current relay, measuring & indicating meters, Suitable capacitor banks, etc.

9) Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and including internally wired & connected with suitable size of copper control wire/cable, etc. all complete.

Cable:- (Transformer to Distribution Panel) Providing, erecting and giving test and trial for power wiring with 120 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables XLPE/PVC insulated armoured cable from Transformer to Panel including laying, jointing and making proper terminations, etc. all complete.

Cable:- (Distribution Panel to Starter to Motor) Providing, erecting and giving test and trial for power wiring with required 16 Sq mm 3 core 1.1KV grade Unarmoured Copper cables from Panel to Motors & Staters, including laying, jointing and making proper terminations, etc. all complete.

Earthing:- Providing and fixing in position copper lightening conductor including copper rod of 20 mm dia as per upper terminal 1.5 M long with a knob at end and with conical spike at top, copper tape conductor 20 x 3 mm size, copper earth plate of 3 mm thick and 0.81 sqm. in area, clamps at 1 M centre to centre including, necessary excavation, laying and fixing the conductor, providing and fixing 40 mm G.I pipe upto 3 M height from ground and 0.5 M below ground including making all connections, filling the earthing pit with charcoal, salt, etc. and refilling and watering, etc. complete as per specifications laid down in relevent I.S. codes.

Chain Pulley Block : Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark with Travelling Trolley.

Tansformer Installation: Cost of construction of DP structure in Rail/RSJ Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. for power supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.

Lighting: Providing, erecting and giving test and trial of internal and external lighting with LED fittings, wiring, power points, MCBs, distribution box, indicators, as per IE rules, etc. all complete.

Miscellaneous Items:- Providing, erecting and giving test and trial of Fire extinguisher, First aid box, gloves & shoes, emergency light, tools & tackles, etc. as per instruction of E/I.

Raw Water Rising Main

Soil Excavation : Earth work in Excavation (As Per I.S. 3114/1965 for laying of different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per Specification and direction of E/I. (Including cost of labour)

For Clasification of soil item - A

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

For Clasification of soil item - B

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

Soft Rock Excavation : Earthwork in Excavation of cuttoff trenches as per design section in soft rock or ordinary rock (where blasting is not needed (vide classification of soil item - C with disposal of spoil beyond 50 m, away from the toe of the dam in country side) with initial lead of 150 m and lift of 1.5 m including making the section in profile, dressing sides in proper slope and bed in proper grade etc, all complete as per Specification and direction of E/I.

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

Dismantling of Flexible Pavements : Dismantling of flexible pavements (Dismantling of flexible and disposal of dismantled material upto lead of 1000 m, stacking serviceable and unserviciable materials seperately.

I By Manual Mean

a Bituminous Courses

1) 900 mm dia DI K-9

b Granular Courses

1) 900 mm dia DI K-9

Dismantling of Rigid Pavement : Dismantling of cement concrete pavement (dismantling of cement concrete pavement by mechanical means by using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated location and disposal of dismantled material upto a lead of 1000 m, stacking serviceable and unserviciable material seperately (Including cost of labour).

1) 900 mm dia DI K-9

Moorum Bedding : Filling in plinth and floors / trenches with contractor’s murum for bedding in 15 cm to 20 cm layers including watering and compaction complete. (Including cost of labour) 10 cm will be depth of moorum bedding.

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

Providing and Supplying ISI mark Confirming to IS-8329/2000 centrifugally cast (spun) DI pipe for water works with socket and spigot ends in standard working lengths of 4.5,5.5 & 6 m for classification K-9 suitable for push on joint (Rubber gasket D Jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating (including cost of one gasket for each pipe) Note: - Rates are F.O.R. Jharkhand but excluding of GST.

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

Supplying Labours,Tools,takles,lubricants etc.. For laying and jointing C.I.,S/S Tyton pipes (class-1A) in tranches without rubber gaskets and making gaskets joints including providing nightgourg,barrier and red light to safe gourd ageist accident, all complete (pipe to by supplied Departmentally free of cost and laying of pipes is to be done as per I.S.S.-3114-1985) as per design specification and direction of E/I.

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

Testing : Supplying labours, tools and tackles for testing of laid C.I. or U.P.V.C. or H.D.P.E. or A.C. pressure pipe upto 60 metre head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmentally).

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

Cutting : Labour charge for one cutting of cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

Providing and supplying ISI standard DI specials & fittings with sealing rubber gasket of SBR, complete with cast iron follower gland and MS nut bolts coated or otherwise protected from rusting and suitable for DI Pipes complete as per IS - 9523 Class K-12. Note: -Rates are F.O.R. Jharkhand but excluding of GST.

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

Sluice Valves/ScourValves : Providing double flange sluice valve confirming for IS 2906/14846 including worn gear arrangement as per test pressure stainless steel spindle, caps transporatation etc. complete F.O.R Rates inclusive all taxes.

Without by pass arrangement - PN - 1.6

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

Non Return Valves : Providing and supplying ISI mark CI D/F reflux valves (non-return valves) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part II.

with byepass arrangement - PN - 1.0

1) 900 mm dia DI K-9

2) 500 mm dia DI K-9

Kinetic Air Valves : Providing and supplying Kinetic Double orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unload-ing, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete.

1) 200 mm Dia.

Construction of Subgrade : construction of subgrade and earthen shoulder with approved material obtained from borrow pit with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table no 300 -2. Rolling with smoth wheeled roller

1) 900 mm Dia. DI K-9

Granular Sub Base : Granular sub base with coarse graded material (table :- 400 - 2) (construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to acheive the desired density, complete as per clause 401). For Grading - I Material

1) 900 mm Dia. DI K-9

Wet Mix Macadam : Wet Mix macadam (providing, laying, spreading and compacting graded stone aggrigate to wet mix macadam specifica-tion including premixing the material with water aggregate to wet mix macadam Specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to acheive the desired density. with smooth 3 wheeled steel roller

1) 900 mm Dia. DI K-9

Prime Coat : providing and applying primer coat with bitumen emulsion on prapared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 Kg/sqm using mechanical means.

1) 900 mm Dia. DI K-9

Bitumenous Macadam : Providing and laying bitumenous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hours using crushed aggregates of specified grading pre mixed with bitumenous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause 501.6 and 501.7 to achieve the desired compaction. For grading - II (19 mm nominal size)

1) 900 mm Dia. DI K-9

Tack Coat : Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 Kg sqm on the prepared bitumenous/granular surface cleaned with mechanical broom.

1) 900 mm Dia. DI K-9

Seal Coat : Providing and laying seal coat sealing the voids in a bitumen surface laid to the specified levels, grade and cross fall using (Type A and B seal coats). Case - I : Type A

1) 900 mm Dia. DI K-9

Granular Sub Base : Plant mix method (Construction of granular sub base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratiry power roller to achieve the desired density, complete as per clause 401. For Grading - II Material

1) 900 mm Dia. DI K-9

Dry Lean Cement concrete Sub Base : Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table of MORTH Specifications 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing.

1) 900 mm Dia. DI K-9

Cement Concrete Pavement : Construction of unreinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 Kg per cum, coarse and fine aggregate conforming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, compacted and finished in a continous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admix-tures as approved, curing compound, finishing to lines and grades as per approved drawings.

1) 900 mm Dia. DI K-9

Thrust Block : Providing and laying RCC M - 150 with nominal mix of (1:2:4) in - do - 20 mm graded coarse aggrigate -- do -- complete job as per Specification and direction of E/I.

Nalla or River Crossing : Providing and laying R.C.C M - 250 with nominal mix (1:1:2) in various components of barrage foundation - do - complete job as per Specification and direction of E/I.

for foundation of Pier for nalla crossing or river crossing

1) 900 mm Dia. DI K-9

Providing and laying R.C.C M - 250 with nominal mix (1:1:2) in various components of barrage superstructure - do - complete job as per specification and direction of E/I.

Pier for nalla crossing or river crossing

1) 900 mm Dia. DI K-9

Centerring & Shuttering

Reinforcement Bar : Providing Tor steel, reinforcement of 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 28 mm 32 mm dia bar as per approved design and drawing -do- do- TMT Bar Fe- 500 (only valid for SAIL, TATA Steel, JSPL, Electro Steel and Vizal Steel).

Valves Chamber : Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 pro-portion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion pre-cast RCC frame and cover, etc. complete as directed by Engineer-incharge. Note: Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M).

As above of 1.5 x 1.5 m internal size and depth upto 1.5 M .

Backfilling : Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per Specification and direction of Engineer - in - Charge. (For classification for Soil item - A & B).

Electromagnetic Bulk Flow Meters : Supply, install and commission Electro-magnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/-0.5% of measured value & protection as per given specifications for size 100 mm-1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25 mtrs built in GSM (with Sim card and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications.

1) 900 mm Dia.

2) 500 mm Dia.

Clear Water Feeder Main

Soil Excavation : Earth work in Excavation (As Per I.S. 3114/1965 for laying of different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per Specification and direction of E/I. (Including cost of labour)

For Clasification of soil item - A

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

For Clasification of soil item - B

100 mm dia DI K-9 (7002+8323+253+8579+7031)

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Soft Rock Excavation : Earthwork in Excavation of cuttoff trenches as per design section in soft rock or ordinary rock (where blasting is not needed (vide classification of soil item - C with disposal of spoil beyond 50 m, away from the toe of the dam in country side) with initial lead of 150 m and lift of 1.5 m including making the section in profile, dressing sides in proper slope and bed in proper grade etc, all complete as per Specification and direction of E/I. (Including cost of labour).

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Dismantling of Flexible Pavements : Dismantling of flexible pavements (Dismantling of flexible and disposal of dismantled material upto lead of 1000 m, stacking serviceable and unserviciable materials seperately (Including cost of labour).

I By Manual Mean

a Bituminous Courses

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

b Granular Courses

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Dismantling of Rigid Pavement : Dismantling of cement concrete pavement (dismantling of cement concrete pavement by mechanical means by using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated location and disposal of dismantled material upto a lead of 1000 m, stacking serviceable and unserviciable material seperately (Including cost of labour).

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Moorum Bedding : Filling in plinth and floors / trenches with contractor’s murum for bedding in 15 cm to 20 cm layers including watering and compaction complete. (Including cost of labour) 10 cm will be depth of moorum bedding.

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Providing and Supplying ISI mark Confirming to IS-8329/2000 centrifugally cast (spun) DI pipe for water works with socket and spigot ends in standard working lengths of 4.5,5.5 & 6 m for classification K-9 suitable for push on joint (Rubber gasket D Jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating (including cost of one gasket for each pipe) Note: - Rates are F.O.R. Jharkhand but excluding of GST.

100 mm dia DI K-9 pipes (7002+8323+253+8579+7031)

150 mm dia DI K-9 pipes (17625+10504+6738+3317+4866+11769+14945)

200 mm dia DI K-9 pipes (3152+14337+7641+3622+5696+11027+157)

250 mm dia DI K-9 pipes (6156+5050+252+3025)

300 mm dia DI k-9 pipes (1067+6420+3848)

350 mm dia DI k-9 pipes (3588+5596+8229)

400 mm dia DI K-9 pipes (7059)

Supplying Labours,Tools,takles,lubricants etc.. For laying and jointing C.I.,S/S Tyton pipes (class-1A) in tranches without rubber gaskets and making gaskets joints including providing nightgourg,barrier and red light to safe gourd ageist accident, all complete (pipe to by supplied Departmentally free of cost and laying of pipes is to be done as per I.S.S.-3114-1985) as per design specification and direction of E/I.

100 mm dia DI K-9 pipes (7002+8323+253+8579+7031)

150 mm dia DI K-9 pipes (17625+10504+6738+3317+4866+11769+14945)

200 mm dia DI K-9 pipes (3152+14337+7641+3622+5696+11027+157)

250 mm dia DI K-9 pipes (6156+5050+252+3025)

300 mm dia DI k-9 pipes (1067+6420+3848)

350 mm dia DI k-9 pipes (3588+5596+8229)

400 mm dia DI K-9 pipes (7059)

Testing : Supplying labours, tools and tackles for testing of laid C.I. or U.P.V.C. or H.D.P.E. or A.C. pressure pipe upto 60 metre head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmentally).

100 mm dia DI K-9 Pipe

150 mm dia DI K-9 Pipe

200 mm dia DI K-9 Pipe

250 mm dia DI K-9 Pipe

300 mm dia DI K-9 pipes

350 mm dia DI K-9 pipes

400 mm dia DI K-9 pipes

Cutting : Labour charge for one cutting of cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.

100 mm dia DI K-9 Pipe

150 mm dia DI K-9 Pipe

200 mm dia DI K-9 Pipe

250 mm dia DI K-9 Pipe

300 mm dia DI K-9 pipes

350 mm dia DI K-9 pipes

400 mm dia DI K-9 pipes

Providing and supplying ISI standard DI specials & fittings with sealing rubber gasket of SBR, complete with cast iron follower gland and MS nut bolts coated or otherwise protected from rusting and suitable for DI Pipes complete as per IS - 9523 Class K-12. Note: -Rates are F.O.R. Jharkhand but excluding of GST.

Socketed

100 - 300 mm dia

350-450 mm dia

Sluice Valves/ScourValves : Providing double flange sluice valve confirming for IS 2906/14846 including worn gear arrangement as per test pressure stainless steel spindle, caps transporatation etc. complete F.O.R Rates inclusive all taxes (Including cost of labour and installation).

Without by pass arrangement - PN - 1.6

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

Non Return Valves : Providing and supplying ISI mark CI D/F reflux valves (non-return valves) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S. 5312 Part II (Including Labour and laying cost).

with byepass arrangement - PN - 1.0

150 mm dia

200 mm dia

250 mm dia

300 mm dia

400 mm dia

Butterfly Valves : Providing, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS-210 Gr.CF 200 generally confirming in to IS- 13095-1991, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearing excluding C.C. foundation /structural steel support (Including cost of labour and installation).

with byepass arrangement - PN - 1.0

100 mm dia Before EMF

150 mm dia Before EMF

200 mm dia Before EMF

250 mm dia Before EMF

300 mm dia Before EMF

350 mm dia Befor EMF

400 mm dia Before EMF

Kinetic Air Valves : Providing and supplying Kinetic Double orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unload-ing, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. (Including Cost of Labour and Installation).

50 mm dia

80 mm dia

100 mm dia

Construction of Subgrade : construction of subgrade and earthen shoulder with approved material obtained from borrow pit with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table no 300 -2. Rolling with smoth wheeled roller

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Granular Sub Base : Granular sub base with coarse graded material (table :- 400-2) (construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to acheive the desired density, complete as per clause 401). For Grading - I Material

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Wet Mix Macadam : Wet Mix macadam (providing, laying, spreading and compacting graded stone aggrigate to wet mix macadam specifica-tion including premixing the material with water aggregate to wet mix macadam Specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to acheive the desired density. with smooth 3 wheeled steel roller

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Prime Coat : providing and applying primer coat with bitumen emulsion on prapared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 Kg/sqm using mechanical means.

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Bitumenous Macadam : providing and laying bitumenous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hours using crushed aggregates of specified grading premixed with bitumenous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause 501.6 and 501.7 to achieve the desired compaction. For grading - II (19 mm nominal size)

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Tack Coat : Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 Kg sqm on the prepared bitumenous/ granular surface cleaned with mechanical broom.

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Seal Coat : Providing and laying seal coat sealing the voids in a bitumen surface laid to the specified levels, grade and cross fall using Type A and B seal coats).

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Granular Sub Base : Plant mix method (Construction of granular sub base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratiry power roller to achieve the desired density, complete as per clause 401. For Grading - II Material

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Dry Lean Cement concrete Sub Base : Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table of MORTH Specifications 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing.

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Cement Concrete Pavement : Construction of unreinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 Kg per cum, coarse and fine aggregate conforming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, compacted and fini-shed in a continous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admix-tures as approved, curing compound, finishing to lines and grades as per approved drawings.

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Thrust Block : Providing and laying RCC M - 150 with nominal mix of (1:2:4) in - do - 20 mm graded coarse aggrigate -- do -- complete job as per Specification and direction of E/I.

Nalla or River Crossing : Providing and laying R.C.C M - 250 with nominal mix (1:1:2) in various components of barrage foundation - do - complete job as per Specification and direction of E/I.

for foundation of Pier for nalla crossing or river crossing

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

450 mm dia DI K-9

500 mm dia DI K-9

Providing and laying R.C.C M - 250 with nominal mix (1:1:2) in various components of barrage superstructure - do - complete job as per specification and direction of E/I.

Pier for nalla crossing or river crossing

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

450 mm dia DI K-9

500 mm dia DI K-9

Centerring & Shuttering

Reinforcement Bar : Providing Tor steel, reinforcement of 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 28 mm 32 mm dia bar as per approved design and drawing -do- do- TMT Bar Fe- 500 (only valid for SAIL, TATA Steel, JSPL, Electro Steel and Vizal Steel).

Valves Chamber : Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 pro-portion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion pre-cast RCC frame and cover, etc. complete as directed by Engineer-incharge. Note: Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M).

As above of 1.5 x 1.5 m internal size and depth upto 1.5 M .

Backfilling : Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per Specification and direction of Engineer - in-Charge. (For classification for Soil item - A & B).

Electromagnetic Bulk Flow Meters : Supply, install and commission Electro-magnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/-0.5% of measured value & protection as per given specifications for size 100 mm-1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25 mtrs built in GSM (with Sim card and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications.

100 mm Dia

150 mm Dia

200 mm Dia

250 mm Dia

Pressure Reducing Valves : Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.

100 mm dia

150 mm dia

200 mm dia

250 mm dia

Distribution Network of All Villages in Godda Block

Soil Excavation : Earth work in Excavation (As Per I.S. 3114/1965 for laying of different types and size of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per Specification and direction of E/I. (Including cost of labour)

For Clasification of soil item - A

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

For Clasification of soil item - B

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

Soft Rock Excavation : Earthwork in Excavation of cuttoff trenches as per design section in soft rock or ordinary rock (where blasting is not needed (vide classification of soil item - C with disposal of spoil beyond 50 m, away from the toe of the dam in country side) with initial lead of 150 m and lift of 1.5 m including making the section in profile, dressing sides in proper slope and bed in proper grade etc, all complete as per Specification and direction of E/I. (Including cost of labour).

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

Dismantling of Flexible Pavements : Dismantling of flexible pavements (Dismantling of flexible and disposal of dismantled material upto lead of 1000 m, stacking serviceable and unserviciable materials seperately (Including cost of labour).

I By Manual Mean

a Bituminous Courses

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

b Granular Courses

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

Dismantling of Rigid Pavement : Dismantling of cement concrete pavement (dismantling of cement concrete pavement by mechanical means by using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated location and disposal of dismantled material upto a lead of 1000 m, stacking serviceable and unserviciable material seperately (Including cost of labour).

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

Moorum Bedding : Filling in plinth and floors / trenches with contractor’s murum for bedding in 15 cm to 20 cm layers including watering and compaction complete. (Including cost of labour) 10 cm will be depth of moorum bedding.

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

HDPE Pipes :- Providing and supplying in standard lengths Polyethyene pipe (HDPE pipe) of 25 mm to 225 mm OD and pressure 10 Kg/cm2 confirming to IS-4984-4984/14151/ 12786/ 13488 (Latest revision with necessary jointing material like connector i.e thread / insert joint / quick release coupler joint / compression fitting joint or flanged joints excluding coupler/specials including transpotation and freight charges, inspection charges, loading unloading charges, conveyance to site, stacking etc all complete excluding GST (Including cost of labour, lowering & laying).

Grade PE 100 - P.N 10

110 mm dia HDPE Pipe

Providing and Supplying ISI mark Confirming to IS-8329/2000 centrifugally cast (spun) DI pipe for water works with socket and spigot ends in standard working lengths of 4.5,5.5 & 6 m for classification K-7 suitable for push on joint (Rubber gasket D Jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating (including cost of one gasket for each pipe) Note: - Rates are F.O.R. Jharkhand but excluding of GST.

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K-7 pipes

Supplying Labours,Tools,takles,lubricants etc.. For laying and jointing C.I.,S/S Tyton pipes (class-1A) in tranches without rubber gaskets and making gaskets joints including providing nightgourg,barrier and red light to safe gourd ageist accident, all complete (pipe to by supplied Departmentally free of cost and laying of pipes is to be done as per I.S.S.-3114-1985) as per design specification and direction of E/I.

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K-7 pipes

Testing : Supplying labours, tools and tackles for testing of laid C.I. or U.P.V.C. or H.D.P.E. or A.C. pressure pipe upto 60 metre head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmentally).

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K-7 pipes

Cutting : Labour charge for one cutting of cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K-7 pipes

350 mm dia DI K-7 pipes

400 mm dia DI K-7 pipes

Providing and supplying ISI standard DI specials & fittings with sealing rubber gasket of SBR, complete with cast iron follower gland and MS nut bolts coated or otherwise protected from rusting and suitable for DI Pipes complete as per IS - 9523 Class K-12. Note: -Rates are F.O.R. Jharkhand but excluding of GST.

Socketed

100 - 300 mm dia

Sluice Valve P.N 1.0 :- Providing double flange sluice valve (Size 50 mm to 1200 mm) confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps transportation etc. complete. (Including labour cost and installation cost).

Without by pass arrangement - PN - 1

80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Pressure Reducing Valves : Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Kinetic Air Valves : Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transpor-tation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete.(Including Cost of Labour and Installation).

40 mm dia

50 mm dia

80 mm dia

100 mm dia

Construction of Subgrade : construction of subgrade and earthen shoulder with approved material obtained from borrow pit with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table no 300 -2. Rolling with smoth wheeled roller

75 mm dia HDPE Pipe

90 mm dia HDPE Pipe

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

350 mm dia DI K -7 Pipe

400 mm dia DI K -7 Pipe

450 mm dia DI K -7 Pipe

Granular Sub Base : Granular sub base with coarse graded material (table :- 400-2) (construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to acheive the desired density, complete as per clause 401). For Grading - I Material

75 mm dia HDPE Pipe

90 mm dia HDPE Pipe

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

350 mm dia DI K -7 Pipe

400 mm dia DI K -7 Pipe

450 mm dia DI K -7 Pipe

Wet Mix Macadam : Wet Mix macadam (providing, laying, spreading and compacting graded stone aggrigate to wet mix macadam specifica-tion including premixing the material with water aggregate to wet mix macadam Specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to acheive the desired density. with smooth 3 wheeled steel roller

75 mm dia HDPE Pipe

90 mm dia HDPE Pipe

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

350 mm dia DI K -7 Pipe

400 mm dia DI K -7 Pipe

450 mm dia DI K -7 Pipe

Prime Coat : providing and applying primer coat with bitumen emulsion on prapared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 Kg/sqm using mechanical means.

75 mm dia HDPE Pipe

90 mm dia HDPE Pipe

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

350 mm dia DI K -7 Pipe

400 mm dia DI K -7 Pipe

450 mm dia DI K -7 Pipe

Bitumenous Macadam : providing and laying bitumenous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hours using crushed aggregates of specified grading premixed with bitumenous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause 501.6 and 501.7 to achieve the desired compaction. For grading - II (19 mm nominal size)

75 mm dia HDPE Pipe

90 mm dia HDPE Pipe

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

350 mm dia DI K -7 Pipe

400 mm dia DI K -7 Pipe

450 mm dia DI K -7 Pipe

Tack Coat : Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 Kg sqm on the prepared bitumenous/ granular surface cleaned with mechanical broom.

75 mm dia HDPE Pipe

90 mm dia HDPE Pipe

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

350 mm dia DI K -7 Pipe

400 mm dia DI K -7 Pipe

450 mm dia DI K -7 Pipe

Seal Coat : Providing and laying seal coat sealing the voids in a bitumen surface laid to the specified levels, grade and cross fall using Type A and B seal coats). Case - I : Type A

75 mm dia HDPE Pipe

90 mm dia HDPE Pipe

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

350 mm dia DI K -7 Pipe

400 mm dia DI K -7 Pipe

450 mm dia DI K -7 Pipe

Granular Sub Base : Plant mix method (Construction of granular sub base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratiry power roller to achieve the desired density, complete as per clause 401. For Grading - II Material

75 mm dia HDPE Pipe

90 mm dia HDPE Pipe

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

350 mm dia DI K -7 Pipe

400 mm dia DI K -7 Pipe

450 mm dia DI K -7 Pipe

Dry Lean Cement concrete Sub Base : Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table of MORTH Specifications 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing.

75 mm dia HDPE Pipe

90 mm dia HDPE Pipe

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

350 mm dia DI K -7 Pipe

400 mm dia DI K -7 Pipe

450 mm dia DI K -7 Pipe

Cement Concrete Pavement : Construction of unreinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 Kg per cum, coarse and fine aggregate conforming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, compacted and fini-shed in a continous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admix-tures as approved, curing compound, finishing to lines and grades as per approved drawings.

75 mm dia HDPE Pipe

90 mm dia HDPE Pipe

110 mm dia HDPE Pipe

100 mm dia DI K -7 Pipe

150 mm dia DI K -7 Pipe

200 mm dia DI K -7 Pipe

250 mm dia DI K -7 Pipe

300 mm dia DI K -7 Pipe

350 mm dia DI K -7 Pipe

400 mm dia DI K -7 Pipe

450 mm dia DI K -7 Pipe

Nalla or River Crossing : Providing and laying R.C.C M - 250 with nominal mix (1:1:2) in various components of barrage foundation - do - complete job as per Specification and direction of E/I.

for foundation of Pier for nalla crossing or river crossing

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

350 mm dia DI k-9

400 mm dia DI K-9

Providing and laying R.C.C M - 250 with nominal mix (1:1:2) in various components of barrage superstructure - do - complete job as per specification and direction of E/I.

Pier for nalla crossing or river crossing

100 mm dia DI K-9

150 mm dia DI K-9

200 mm dia DI K-9

250 mm dia DI K-9

300 mm dia DI k-9

Centerring & Shuttering

Reinforcement Bar : Providing Tor steel, reinforcement of 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 28 mm 32 mm dia bar as per approved design and drawing -do- do- TMT Bar Fe- 500 (only valid for SAIL, TATA Steel, JSPL, Electro Steel and Vizal Steel).

Valves Chamber : Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 pro-portion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion pre-cast RCC frame and cover, etc. complete as directed by Engineer-incharge. Note: Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M).

As above of 1.5 x 1.5 m internal size and depth upto 1.5 M .

Backfilling : Earth work in back filling the trenches after laying different types and size of pipes with earth remo-ved during excavation within initial lead and lift as per Specification and direction of Engineer - in-Charge. (For classification for Soil item - A & B).

Clear Water Sump

10,000 litres Capacity - 3 Nos.

15,000 litres Capacity - 1 Nos.

Cost of 25,000 litres Capacity - 3 Nos.

Operation & Maintenance for Five years

O/M work with Labour component & Materials for 1st Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 2nd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 3rd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 4th Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 5th Year

As per SBD Section - 5 Clouse 9.10

Part-B) Sudarpahari Block Full Coverage Rural Water Supply Scheme

WATER TREATMENT PLANT

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and necessary equipment for designing & construction of Conventional WTP of 5.00 MLD capacity. With all complete job. (Please refer to Section 5, Sl. 2.3 of SBD)

Providing, installing and giving satisfactory field testing of bulk water meter, horizontal inferential multijet type with magnetic drive and dry dial suitable for ambient 50º C Temperature duly sealed against tampering complete with flanges at both ends and conforming to class B as per ISO 4064 along with manufacturer's test certificate and guarantee certificate, including cost of all materials and labour etc with OIML. MID certification for Abroad meter and FCRI for India including 36 months guarantee etc complete.

1) 250 mm dia.

2) 300 mm dia.

Elevated Service Reservoir

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and equipment for designing & construction of ESR all complete job. (Please refer to Section 5,Sl. 2.8 of SBD)

ESR - 1 Capacity in KL. = 50 Staging in M. = 14

ESR - 2 Capacity in KL. = 110 Staging in M. = 24

ESR - 3 Capacity in KL. = 70 Staging in M. = 16

ESR - 4 Capacity in KL. = 140 Staging in M. = 24

ESR - 5 Capacity in KL. = 90 Staging in M. = 22

ESR - 6 A Capacity in KL. = 70 Staging in M. = 24

ESR - 6 B Capacity in KL. = 90 Staging in M. = 9

ESR - 7 Capacity in KL. = 80 Staging in M. = 10

ESR - 8 Capacity in KL. = 150 Staging in M. = 23

ESR - 9 Capacity in KL. = 210 Staging in M. = 7

ESR - 10 Capacity in KL. = 240 Staging in M. = 7

ESR - 11 Capacity in KL. = 30 Staging in M. = 6

ESR - 12 Capacity in KL. = 250 Staging in M. = 23

Providing, installing and giving satisfactory field testing of bulk water meter, horizontal inferential multi jet type with magnetic drive and dry dial suitable for ambient 50º C Temperature duly sealed against tampering complete with flanges at both ends and conforming to class B as per ISO 4064 along with manufacturer's test certificate and guarantee certificate, including cost of all materials and labour etc with OIML. MID certification for Abroad meter and FCRI for India including 36 months guarantee etc complete.

1) 100 mm dia.

2) 150 mm dia.

3) 200 mm dia.

Sump - A Capacity 1,20,000 Litres,

SUMP AT CHEHAL Capacity 1,40,000 Litres,

RAW WATER PUMPING MACHINERY & ELECTRICAL WORK

Supply, installation, testing and commissioning of Centrifugal pump sets with allied equipment as under

Providing, erecting and commissioning of Multi stage/ HSC Centrifugal pump (make: Kirloskar / WPIL/ Mather & Platt) as per IS:5120, capable for required discharge and head, consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (IE3) TEFC squirrel cage induction motor confirming to IS:325 and IS:12615, having 15% more BHP than that of pump, operating on 1500rpm, 415V, 3 PH, 50 HZ [make: Kirloskar /ABB /CGL /Marathon] all complete with required size of sluice valve and non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, MS delivery & Suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of E/I. (Note:- Contractor will have to check the design of pump & motor and get it approved by the Department).

Discharging - 3360 LPM, against the head of 140 m, (1W+1S)

Power wiring with required 400 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables, XLPE/PVC insulated armoured cable from Transformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations, etc. all complete.

Power wiring with required 120 Sq mm 3.0 core 1.1KV grade unarmoured Aluminium Cables, XLPE/PVC insulated unarmoured cable from Transformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations, etc. all complete.

Earthing: Making Earthing with all materials, equipments & accessories etc.all complete as per IE rule foe each motor.

Supplying, installation & commissioning of Lightening arrestor for Pump house, fire fighting system, first aid, Rubber matting, etc. for RWS, including External and Internal Electrification with all with all materials & labour etc. all complete.

Crane: Providing , erecting and commissioning of 3 ton Single Girder Hand Operated Circular/Rectan-gular Travelling Crane with 6 m lift complete with chain pulley block ISI marked and travelling trolley both tested for 50 % overload including arrange-ment for longitudinal travel/circular travel and cross travel with wheel, hand chain, etc. complete.

Tansformer Installation: Cost of construction of DP structure in Rail/RSJ Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. for power supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.

CLEAR WATER PUMPING MACHINERY & ELECTRICAL WORKS AT WTP

Supply, installation, testing and commissioning of Centrifugal pump sets with allied equipment as under-

Providing, erecting and commissioning of Multi stage / HSC Centrifugal pump (make: Kirloskar / WPIL/ Mather & Platt) as per IS:5120, capable for discharging 5545 LPM against a head of 150 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (IE3) TEFC squirrel cage induction motor confirming to IS:325 and IS:12615, having 10% more BHP than that of pump, operating on 1500rpm, 415V, 3 PH, 50 HZ [make: Kirloskar /ABB/CGL/Marathon] all complete with required size of sluice valve and non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, MS delivery & Suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of E/I. (Note:-Contractor will have to check the design of pump & motor and get it approved by the Department).

Discharge -1250 LPM, Head- 141 M. (1W+1S)

Discharge -2120 LPM, Head- 155 M (1W+1S)

Supplying, erecting, assembled fully Automatic Star Delta starter, in a provided cubical pannel to operate squirrel cage induction motor working on 308-440 volt, 3 Pz, 50 volt with no volt coil,over load relay and ON/OFF push Buttons.

a) 75 HP Motors

b) 125 HP Motors

Power wiring with required 400 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables, XLPE/ PVC insulated armoured cable from Transformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations,etc. all complete..

Power wiring with required size 3.0 core 1.1KV grade unarmoured Aluminium Cables, XLPE/PVC insulated unarmoured cable from Transformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations,etc. all complete.

a) 50 Sq mm

b) 95 Sq mm

Earthing: making earthing as per IE Rule for each motors & Stabilizer.

Supplying, installation & commissioning of Lightening arrestor for Pump house, fire fighting system, first aid, Rubber matting, etc. for WTP.

Providing, erecting and commissioning of 3 ton Single Girder Hand Operated Circular / Rectangular Travelling Crane with 6 m lift complete with chain pulley block ISI marked and travelling trolley both tested for 50 % overload including arrangement for longitudinal travel / circular travel and cross travel with wheel, hand chain, etc. complete.

Tansformer Installation: Cost of construction of PCC platform/ foundation with DP structure in PSC Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. for power supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.

CLEAR WATER PUMPING MACHINERY & ELECTRICAL WORKS AT SUMP - A

Supply, installation, testing and commissioning of Centrifugal pump sets with allied equipment as under-

Providing , erecting and commissioning of Multi stage/ HSC Centrifugal pump (make: Kirloskar / WPIL/ Mather & Platt) as per IS:5120, capable for required discharge and head, consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (IE3) TEFC squirrel cage induction motor confirming to IS:325 and IS:12615, having 15% more BHP than that of pump, operating on 1500rpm, 415V, 3 PH, 50 HZ [make: Kirloskar /ABB /CGL /Marathon] all complete with required size of sluice valve and non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, MS delivery & Suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of E/I. (Note:-Contractor will have to check the design of pump & motor and get it approved by the Department).

Discharge - 520 LPM, Head- 142 M. (1W+1S)

Supplying, erecting, assembled fully Automatic Star Delta starter, in a provided cubical pannel to operate squirrel cage induction motor working on 308-440 volt, 3 Pz, 50 volt with no volt coil, over load relay and ON/OFF push Buttons.

Power wiring with required 50 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables, XLPE/ PVC insulated armoured cable from Transformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations, etc. all complete.

Power wiring with required 16 Sq mm 3.0 core 1.1KV grade unarmoured Aluminium Cables, XLPE / PVC insulated unarmoured cable from Transformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations, etc. all complete.

Earthing: making earthing as per IE Rule for each motors & Stabilizer.

Supplying, installation & commissioning of internal and external lighting with all materials, Lightening arrestor for Pump house, fire fighting system, first aid, Rubber matting, etc. at Pumping plant.

Providing, erecting triple spure gear tupe Chain pully block suitable for capaciy as below 6 m lift complete with load chain and hand chain suitable for above lift, tested for 50 % overload as per IS 3832 carring ISI mark, with travelling trolley.

Tansformer Installation: Cost of construction of PCC platform/ foundation with DP structure in PSC Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. for power supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.

CLEAR WATER PUMPING MACHINERY & ELECTRICAL WORKS AT SUMP - B

Supply, installation, testing and commissioning of Centrifugal pump sets with allied equipment as under-

Providing, erecting and commissioning of Multi stage / HSC Centrifugal pump (make: Kirloskar / WPIL / Mather & Platt) as per IS:5120, capable for required discharge and head, consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (IE3) TEFC squirrel cage induction motor confirming to IS:325 and IS:12615, having 15% more BHP than that of pump, operating on 1500rpm, 415V, 3 PH, 50 HZ [make: Kirloskar /ABB /CGL /Marathon] all complete with required size of sluice valve and non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, MS delivery & Suction pipe, common header, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of E/I. (Note:- Contractor will have to check the design of pump & motor and get it approved by the Department).

Discharge - 610 LPM, Head- 70 M. (1W+1S)

Supplying, erecting, assembled fully Automatic Star Delta starter, in a provided cubical pannel to operate squirrel cage induction motor working on 308-440 volt, 3 Pz, 50 volt with no volt coil,over load relay and ON/OFF push Buttons.

Power wiring with required 50 Sq mm 3.5 core 1.1KV grade armoured Aluminium Cables, XLPE/ PVC insulated armoured cable from Transformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations, etc. all complete.

Power wiring with required 10 Sq mm 3.0 core 1.1KV grade unarmoured Aluminium Cables, XLPE / PVC insulated unarmoured cable from Transformer to MCP at Clear Water Pump House. Laying, jointing and making proper terminations, etc. all complete.

Earthing: making earthing as per IE Rule for each motors & Stabilizer.

Supplying, installation & commissioning of internal and external lighting with all materials, Lightening arrestor for Pump house, fire fighting system, first aid, Rubber matting, etc. at Pumping plant.

Providing, erecting triple spure gear tupe Chain pully block suitable for capaciy as below 6 m lift complete with load chain and hand chain suitable for above lift, tested for 50 % overload as per IS 3832 carring ISI mark, with travelling trolley.

Tansformer Installation: Cost of construction of PCC platform/ foundation with DP structure in PSC Pole for above mention transformer with different type of MS channels, M.S. angles, brackets, insulators, AB Switch, three set of horn gap fuse, DO fuse, disc & pin insulator, lightening arrester with earthing, stay sets, nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos., one no. for neutral and one for body) with all required material, technicians, labours, Grouting, PCC work, fencing, Danger board, testing of transformer oil, fitting, fixing, connecting with HT/LT lines, etc. for power supply, etc. all complete as per I.E. rules and specification of Jharkhand state electricity board.

Pump House - 3 Nos.

E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item - B) and disposal of excavated earth obtained to a distance upto 50 M including all lift leveling, ramming the foundation trenches removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Providing designation 75 A one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I

Providing P.C.C. M- 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing, taxes & royalty all complete as per building specification & direction of Engineer-in-charge.

Centerring & Shuttering

Providing R.C.C. M- 200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes & royalty all complete as per building specification & direction of Engineer-in-charge.

Column

Centerring & Shuttering

Providing R.C.C. M-200 in band at plinth level with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.

Centerring & Shuttering

Providing R.C.C. M- 200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes & royalty all complete as per building specification & direction of Engineer-in-charge.

Centerring & Shuttering

Providing R.C.C. M- 200 with nominal mix of (1:1.5:3) in beam with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes & royalty all complete as per building specification & direction of Engineer-in-charge.

Centerring & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stones chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (But excluding cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/I.

Centerring & Shuttering

Providing av. 63 mm thick R.C.C. M-200 with nominal mix of (1:1.5:3) chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling and sides of chhajja with sand of F.M. 1.5, curing (but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification & direction of E/I.

Centerring & Shuttering

Providing designation 75 A Brick work in C.M. (1:6) in foundation and plinth withapproved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royality all complete as per building specification and direction of E/I.

Providing 25 mm thick damp proof coarse with cement concrete M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer with 5% cico or any other approved water proof-ing compound and placing in position, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75 A Brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening, materials, scaffolding, raking out joints 15 mm depth, curing, taxes and royalty all compelete as per building specification and direction of E/I.

Supplying, fitting and fixing fully glazed steel doors, windows or ventilations of standard rolled "Z" and mullion steel sections and size as per IS-1038 joints met and welded with 100 x 16 x 3 mm M.S. lugs fixed in cement concrete (1:2:4) blocks of 15 x 10 x 10 cm size including cost of oxidized iron fittings, with hinges, handle per steps, catch springs, 3 mm thick plain glass panes with Aluminium beads and inner frame fixed with lugs with 20 mm long 6.3 mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint, carriage to work site hoisting and placing in position in all storeys and taxes all compelete as per building specification and direction of E/I.

Supplying, fitting and fixing M.S grill gate with M.S. grill made of 20 x 6 mm M.S flats of 16 mm M.S square bars fitted on 25 x 25 x 6 mm M.S angle frame of size 60 x 60 x 6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. (when steel is not supplied by the deptt.)

Providing 6 mm cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12 mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting inclding rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I.

Filling in foundation trenches and plinth in layers not exceeding 150 mm thick, well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direcrtion of E/I. (Mode of measurement compacted volume)

Providing 50 mm thick cement concrete flooring (1:2:4) with 20 mm to 6 mm size graded stone chips finished with floating coat of neat cement in panels, including cost of curing, finishing the surface smooth by rubbing with carborundum stone, taxes and royalty all complete as per building specification and direction of E/I.

Provide two coat of snowcem of approved shade & make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding, curing & taxes all complete as per building specification & direction of E/I.

Providing primer coat of red lead paint of approved make over new steel surface including prepairing the surface after cleaning, removing rust, dirt scales, smokes, grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification & direction of E/I. (Mode of measurment-Area shall be multiplied by the coefficient as indicated in building specification.)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I.

Providing TMT steel reinforcement of 8 mm dia. rods to 16 mm dia (Only valid for SAIL & TATA STEEL) as per approved design and drawing excluding carriage of MS rods (Straight or in coil) to work site cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification & direction of E/I.

Providing R.S. joist 250 x 125 mm size fitting and fixing in position including cutting to required in shape and size, its carriage applying a primer coat of red lead paint etc. all complete job as per building specification & direction of E/I.

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 06 KM lead

Stone/Stone Chips 11 KM lead

Approch Road , 520 M Length

Construction of embankment with approved meterial obtained from borrow pits with a lift 1.5 M transporting to site spreading,grading to required slope and compacting to meet requirement of to tables 300.1 and 300.2 with a lead upto 1000 M as per technical specification 301.5.

(A) By mix in place method construction of granual sub base by providing well graded material, spreading in layer with mortar grade on prepared surface, mixing by mix in place method with rotavater at OMC, and compecting with smooth wheel roller to achiver the desired dencity,complete as per technical specification clouse 401,

Construction of un-reinforced dowel joints at expaction and construction joint only plain cement concrete pavement thickness as per design over a with shovels rakes compacted using prepared sub base with 43 grade cement or any other type as per clouse 1501.2.2 M-30 (grade) coarse not exceeding 25 mm mixed in concrete mixer of not less than 0.2 cum capacity and appropenate weigth bacher using approved mixed design laid in approved fixed side fromwork (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including leveling the fromwork as per drawing), spreading the concrete with shovels rankes compacted using needle seed and plate vibrators and finished in contaction and empanction contraction jointing appling debonding strips primer sealant dowel bars near approches to bridge/culvert and contraction joints admixtures as approved curring of concrete slabs for 14 days using curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clouse 1501.

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weigth as per table-1300.1 no frament weighing less than 25 kg laid dry complete as per drawing and technical specification clouse 1301.

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete.

Cement 10 KM lead

Sand 36 KM lead

Stone/Stone Chips 11 KM lead

Boulders 11 KM lead

Twin Type Staff Quarter - 1 Unit (Please refer to Section 5, Sl. 2.7 of SBD)

E/W in Excavation in foundation trenches in ordinary soil (Vide classification of soil Item -A) & disposal of excavatd earth obtained to a distance up to 50 M including all lift leveling ramming the foundation trenches removing root of trees scrubs all complete as per approved design.

Providing, coarse clean sand in filling in foudation trenches /in Plinth including ramming & watering in layers not exceeding 150 mm thick with all leads lift including cost of all materilas, labour, royalty & taxes all complete as per building specification & direction of E/I

Providing designation 75 A one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I

Providing P.C.C M-100 in nominal mix of (1:3:6) in foundation with appoved quantity of stone metal (50 mm 25 mm dia size)graded & clean coarse sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing taxes & royalty all complete as per building specification & direction of E/I.

Providing designation 75 A brick work in C.M. (1:6) in foundation 7 Plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including Providing 10 mm thick mortar joints, Cost of screening, materials, Scaffolding, raking out joints to 15 mm depth curing, taxes & royalty all complete as per building specification & direction of E/I

Providing 25 mm thick damp proof coarse with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to3 including screening, shuttering mixing cement concrete in mixer with 5% cico or any other approved water proffing compound and placing in position, vibrating, striing, curing, taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing10 mm thick motar joints, cost of screening, materials, scaffolding, raking out joints to 15 mm depth curing, taxes & royalty all complete as per building specification & direction of E/I

Providing R.C.C M-150 with nominal mix of (1:2:4) in lintel level with approved quality of stone chips 20 mm to 6mm size graded & clean coarse sand of F.M 2.5 to including screening , centring, shuttering and mixing cement concrete in mixer & placing in position vibrating striking curing (but excluding the cost of reinforcement ) taxes & royalty all complete as per building specification of (E/I.

Centerring & Shuttering

Providing average 63 mm thick R.C.C M -150 with nominal mix (1:2:4) chajja in shelves with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M 2.5 to 3 including making drip course in concrete, screening, centering shuttering & mixing cement concrete in mixer & placing in position vibrating, striking, 6 mm cement plaster (1:4) in celling & sides of chajja with sand of F.M 1.5, Curing (But excluding the cost of reinforcement) taxes and royalty all complete as per building specification of E/I

Centerring & Shuttering Door & Windows

Shelves

Providing R.C.C M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size Graded & Clean coarse sand F.M 2.5 to including making drip course in cocrete, screening, concreting, shuttering, centring mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building Specification & direction of the E/I

Centering & Shuttering including proping

Supplying fitting & fixing good quality, well dressed & well seasoned sal wood work in choukhat in doors, windows, skylights, fan light and C/W celestial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of E/I

Supplying fitting and fixing 250 x 20 x 6 mm L-type M.S Clamp properly fish tailed .including making holes and setting the same in 375 x 125 x 75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and diection of E/I @6 for each door & 4 for each window Total Quantity -(2x3x6+2x4x4)=68 nos

Supplying all materials, labours and fitting & fixing 38 mm (1.5) thick good quality seasoned sal wood battened shutter ledged & braced in door and windows with oxidized iron fitting such as hingles, sliding door bolts, tower bolts, handles or ings hooks and eye, cleats, sand block as per schedule, taxes & royalty all complete as per building specification & direction of Engineer -in- charge

Supplying, fittings & fixing M.S Gril made of 20 x 6 mm M.S flat as per approved design & drawing properly fabricated with joints continous filllet welded and finshed smooth, carriage of grill to work site hoisting as per the building specification and direction of E/I (where materials is not supplied by the Deptt.)

Providing 25 mm thick pre cast R.C.C M-150 with nominal mix of (1:2:4) in jali with approved quality to stone chips of 6mm nominal size and clean coarse sand of FM 2.5 to 3 with 1.6 mm thick M.S wire as per approved design and drawing and placing the same in position true to plumb and level and properly grouted with cement mortar (1:3) including cost of curing, Scaffolding and finishing all complete as per building specification and direction E/I

Providing and fixing fan hook of 16 mm dia M.S bar 1 meter long bent to reqired size and shape placed in position and fixing in R.C.C slab/beam at the time of casting all complete as per building specification of E/I where material is not supplied by cheet

Supplying, fitting and Fixing M.S Grill gate made of 20 x 6 mm M.S or 16 mm M.S raurbar Flat fitted on 25 mm x 25 mm x 6mm M.S angle frame of size 60 x 60 x 6 as per approved design including cost of fabrication & drawing, properly fabricated with joints continuous fillet welded & finished smooth, providing necessary locking arrangements with Haskell & dummy duly fixed in C.C (1:2:4) blocks of reuired size applying a priming red lead paints over steel works, taxes , carriage of grill to work site, as per the building specification & direction of E/I (where materials is not supplied by the Dept)

Providing 6 mm thick cement plaster (1:4) in celling with approved quality of clean coarse sand of F.M 1.5 including screening, curing with all leads & lifts of water, scaffolding, taxes & royalty all complete as per building specification & direction of E/I

Providing 12 mm thick cement plaster (1:6) with approved quality of clean coarse sand of F.M 1.5 including screening Curing with all leads & lifts of water, Scaffolding, taxes 7 royalty all complete as per building specification & direction of E/I.

Providing cement 1:3 (12mm ) plaster with cement mortar (1:3) using clean coarse sand finishing with neat punning a dado 6" (150 mm) high a side room and out side wall upto plinth level includng screening, curing with all leads & lifts of water, scaffolding, taxes and royalty all complete as per building specification & direction of E/I

Filling in foudation trenches & Plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I (Mode of measurement compacted volume)

Providing average 150 mm thick dry rammed khoa beaten to 112 mm. (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing & carriage of water with all leads, making proper slope & blending the top with cement mortar (1:10) all complete as per building specification & direction of E/I.

Providing 25 mm thick . First class patent stone flooring (1:2:4) with stone chips in two layers ,bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in pannels including cost of curing , finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I

Providing designation 75 A one brick on edge flooring in C.M (1:4) with top surface flush pointed in CM (1:4) approved quality of clean coarse sand of F.M 2 to 2.5 including the cost of screening ,raking out joints to 15 mm depth, curing taxes, royalty all complete as per building specification and direction (E/I)

White washing three coat over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I

Providing all materials,labours & doing 2 (two) Coat colour washing over a coat of white washing over new surface with approved quality of lime & Colour over the new surface including the cost of clening surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing, scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I

Providing two coats of painting with readymix paint synthetic enamel paint over a coat of primer of approved shad and make over new wooden surface after cleaning, removing dirt scales ,smokes,grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaning the surface thouroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Providing 2(two) coats of Paniting with ready mixed paints of approved shade & make over steel surafce including cleaning the surface thouroughly , scaffolding & taxes all complete as per building specification & direction of E/I

Providing 10 mm (TMT) Fe 500 TOR for steel reinforced as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire with cost of wore removal of rust placing the rods in position all complete as per building specification and direction of E/I

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 06 KM lead

Stone/Stone Chips 11 KM lead

Water Supply Sanitation Installation (Plumbing work)

Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I.

i) 25mm GI. Pipe.

ii) 15 mm GI. Pipe.

Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I.

i) 15 mm GI. Pipe

Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I.

Supplying and fixing GI fittings of approved make all complete as per direction of E/I.

(a) Elbow 15 mm dia

(b) Tee plane 15mm dia

(c) Nipple 15mm dia.

(d) Union Socket 25mm dia

(e) Union Socket 15mm dia

(f) Brass bib cock 15mm dia

(g) C.I stop cock 15mm dia

(h) C.I. stop cock 25mm dia

(i) Reducing Socket 25x15mm

(j) Tee 25x25x15mm dia

Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stop cock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (510mm.long with 12.5 Liter low level PVC System).

SEPTIC TANK and SOAK PIT

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.

Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I.

Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mm to 6mm size well graded and clean course sand of FM-2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and directions of E/I.

(a) 19 mm thick

(b) 12 mm thick

Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I.

(a) B/W in C.M (1:4)

(b) B/W 75-B in (1:6) for Soak pit

(c) Brick work in dry masonry for soak pit.

Providing pre cast R.C.C. M-150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I.

Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.

10 mm dia

Supplying fitting and fixing H.C.I. Pipe/ H.C.I. fitting of Approved make confirming to I.S.S 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.

(a) 100mm dia H.C.I. Tee.

(b) 100mm dia H.C.I. Band

(c) 50mm dia H.C.I. Cowel

(d) 50mm dia H.C.I. Vent pipe

(e) 100mm H.C.I. Pipe

Supplying materials and labours and fixing 20mm dia M.S bar steps in wall of 0.3 m interval and staggered in (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.

Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete.

Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I.

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. Cover With frame (Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I

Carriages of materials

(a) Brick – 06 KM lead

(b) Sand - 36 KM lead

(c) Stone chips - 11 KM lead

(d) Steel - 10 KM lead

(d) Cement- 10 KM lead

Electrical Works

Point wiring in PVC conduit with modular type switch wiring for light point /fan point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for twin control light point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with two way modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for light /power plug point with 2 x 4 sqmm F.R.PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with one no 4 sqmm FR PVC insulated copper conductor single core cable for loop earthing etc as required.

Copper sub main wiring in PVC conduit Wiring for sub main wiring with PVC insulated copper conductor single core in surface/recessed PVC conduit as required.

2 x 1.5 sqmm + 1 x 1.5 sqmm earth wiring

2 x 2.5 sqmm + 1 x 2.5 sqmm earth wiring

Supplying and fixing following way three pole and neutral sheet MCB distribution board 415 volts on surface/recessed complete with tinned copper bush bars, neutral link, earth bar, din bar, detachable gland plate inter connection phosphatised and power painted including earthing etc as required (but with out mcb / rccb / Isolator) (4+12) double door horizontal type.

Supplying and fixing 5 amp to 32 amp, rating 240 volts, B series miniature circuit breaker of single poles in existing MCB DB complete with connecting, testing, and commissioning etc as required

Earthing with G.I. earth pipe 4.5 M long 40mm dia including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe etc with charcoal, salt all complete as per electrical rule

Supplying ,fitting and fixing following sizes of PVC conduct along with accessories in surface / races including cutting the wall and making good the same in case of recessed conduit as required

PVC con 20 mm PVC pipe

PVC con 25 mm PVC pipe

Installation commissioning and testing Ceiling Fan

Carriage of ceiling fan and regulator

Supplying, fitting and fixing 5 amp ceiling rose on the existing junction

Supplying, fitting and fixing breas batten/ angle holder including connection etc.

Supplying, fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 3 pin 5/6 amp modular type switch, connection, painting etc as required.

Supplying, fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 6 pin 5/6 amp and 15/16 amp socket outlet and 15/16 amp modular type switch, connection, painting etc as required.

Supplying and drawing co-axial T.V. cable RG-06 grade 0.7 nn solid copper conductor PE insulated seilded with fine tinned cover braid and protected with PVC sheath in the existing surface / recessed steel/ PVC conduit as required.

Supplying and fixing modular switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc,as required. TV antenna socket out put

Supplying, fitting and fixing modular base and cover plate on existing modular metal boxes etc as required.

Cost of Earthing with G.I. earth pipe 4.5 M long 40mm dia G.I.Pipe 600 mm x 600 mm x 6 mm thick copper earth plate and 8 SWG copper wire including cost of making 1.2 x 1.2 x 3m deep pit and filling with charcoal, salt all complete as per electrical rule

Compound Wall/ Boundry Wall for WTP. (2022.40 M Long)

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of Compound wall. etc. all complete job. (Please refer to Section 5, Sl. 2.9 of SBD)

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in stiffeners with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Centering & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Centering & Shuttering

Providing designation 75 A brick work in CM (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification & direction of E/I. Qnty. Same as Item no.13

Providing Tor steel reinforcement of 10 mm,12 mm, &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site, cutting, bending and binding with annealed wire with cost of wire ,removal of rust, Placing the rods in position all complete as per building specification and direction of E/I.

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I.

Carriage of materials from divisional store or kiln site or quarry site to work site including contractor's profit, loading, unloading, transportation etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Stone/Stone Chips 11 KM lead

Bricks 06 KM lead

Gate - 16 nos.

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.

Centering & Shuttering

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Centering & Shuttering

Providing Tor steel reinforcement of 10 mm, 12 mm & 16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site, cutting ,bending and binding with annealed wire with cost of wire, removal of rust, Placing the rods in position all complete as per building specification and direction of E/I.

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I.

Supplying fitting & Fixing M.S. grill gate with M.S. grills made 20x6mm M.S. flat or 16mm M.S. square bars fitted 25 x 25 x 6 mm M.S. angle frame of size 60 x 60 x 6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface

Carriage of materials from divisional store or kiln site or quarry site to work site including contractor's profit, loading, unloading, transportation etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Stone/Stone Chips 11 KM lead

Bricks 06 KM lead

Raw Water Rising main.

Providing and Supplying ISI mark Confirming to IS-8329/2000 centrifugally cast (spun) DI pipe for water works with socket and spigot ends in standard working lengths of 4.5,5.5 & 6 m for classification K-9 suitable for push on joint (Rubber gasket D Jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating (including cost of one gasket for each pipe) Note: - Rates are F.O.R. Jharkhand but excluding of GST.

DI K-9, Dia 300 mm

Supplying labours, tools and tackles for testing of laid CI pressure pipe upto 60m head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmently)

DI K-9, Dia 300 mm

Providing and supplying ISI standard DI specials & fittings with sealing rubber gasket of SBR, complete with cast iron follower gland and MS nut bolts coated or otherwise protected from rusting and suitable for DI Pipes complete as per IS - 9523 Class K-12. Note: -Rates are F.O.R. Jharkhand but excluding of GST.

Supplying double flanged sluice valve confirming for IS 2906/14846 including warn gear arrange-ments as per test pressure stainless steel splindle / caps etc. complete. (Sluice and scour valve)

DI K-9, Dia 300 mm

Providing and supplying air valves as per IS-10845 - 2000 and MJP's standard specifications of approved make and quality of following diameters including all taxes (central and local),railway freight, inspection charges, unloading from railway wagons, loading in to truck, transportation transportation upto departmental stores / site unloading and stacking etc. complete.(Air Valve Single Ball Flanged /Screwed Type -PN -1.6)

40 mm dia Air valve

Earthwork in excavation (as per I.S. 3114/1965 for laying of different type and sizes of pipe so as to give one meter avarage cover over the socket of pipes with disposal of excavated with in initial lead and lift as per specification and direction of engineer-in charge.

Excavation in soil item-B

Earthwork in excavation of cut-off trenches by the hydraulic excavator as per designed section in soft rock (Where blasting is not needed) (vide type of soil item -C) with disposal of soil beyond 1/2 km from centre of trench but upto 1 km with all lifts by tipper including construction and maintenance of haul road all complete as per specification & direction of E/I.

Supplying labours, tools and tackles, lubricant etc. for laying and jointing C.I. S/S tyton pipes (class LA) trenches supplying rubber gasket (Rubber gasket confirming to I.S.S.-5382-1969) and making gasket joint including providing night guard, barrier and red light to safe guard against accident, all complete (Pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S.S. 3114-1985) as per design, specification and direction of E/I.

DI K-9, Dia 300 mm

Lowering & laying and fixing in proper alignment and position all types of CI air valve as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all materia and giving satisfactory hydraulic testing etc. complete. (for all class of valves)

40 mm dia Air valve

Supplying labour and tools for fixing C.I. sluice valve in trenches with pair of C.I. Tail piece including making laed caulked joints and flanged joint as per I.S.S. specification including supplying all jointing material (pig lead confirming to I.S.S 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and bolt confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I.

DI K-9, Dia 300 mm

Earthwork in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge (for classification of Soil item A & B).

Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20M.x 0.90M. x 1.50M. inner size having 25cm. thick 75A brick masonry wall in C.M. (1:6), over 150mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150mm. thick with 20mm. to 6mm. graded stone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.

Providing P.C.C. M-150 with nominal mix of (1:3:6) in foundation with approved quality stone metal (20 mm to 6 mm Size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer -in charge

A) Thrust Block

Above 200 mm & upto 300 mm dia.

Clear Water Rising main.

Providing and Supplying ISI mark Confirming to IS-8329/2000 centrifugally cast (spun) DI pipe for water works with socket and spigot ends in standard working lengths of 4.5,5.5 & 6 m for classification K-9 suitable for push on joint (Rubber gasket D Jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating (including cost of one gasket for each pipe) Note: - Rates are F.O.R. Jharkhand but excluding of GST.

DI K-9, Dia 100 mm. (11106+10589+1350+1336) = 24381

DI K-9, Dia 150 mm. (2755+14504+19401+8714) = 45374

DI K-9, Dia 200 mm. (8330+9428) = 17758

DI K-9, Dia 250 mm. (3742+7685) = 11427

Supplying labours, tools and tackles for testing of laid CI pressure pipe upto 60m head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmently)

DI K-9, Dia 100 mm. (11106+10589+1350+1336) = 24381

DI K-9, Dia 150 mm. (2755+14504+19401+8714) = 45374

DI K-9, Dia 200 mm. (8330+9428) = 17758

DI K-9, Dia 250 mm. (3742+7685) = 11427

Providing and supplying ISI standard DI specials & fittings with sealing rubber gasket of SBR, complete with cast iron follower gland and MS nut bolts coated or otherwise protected from rusting and suitable for DI Pipes complete as per IS - 9523 Class K-12. Note: -Rates are F.O.R. Jharkhand but excluding of GST.

Supplying double flanged sluice valve confirming for IS 2906/14846 including warn gear arrange-ments as per test pressure stainless steel splindle / caps etc. complete. (Sluice and scour valve)

DI K-9, Dia 100 mm. (11106+10589+1350+1336) = 24381

DI K-9, Dia 150 mm. (2755+14504+19401+8714) = 45374

DI K-9, Dia 200 mm. (8330+9428) = 17758

DI K-9, Dia 250 mm. (3742+7685) = 11427

Providing and supplying air valves as per IS-10845 - 2000 and MJP's standard specifications of approved make and quality of following diameters including all taxes (central and local),railway freight, inspection charges, unloading from railway wagons, loading in to truck, transportation transportation upto departmental stores / site unloading and stacking etc. complete.(Air Valve Single Ball Flanged /Screwed Type -PN -1.6)

25 mm dia Air valve

Earthwork in excavation (as per I.S. 3114/1965 for laying of different type and sizes of pipe so as to give one meter avarage cover over the socket of pipes with disposal of excavated with in initial lead and lift as per specification and direction of engineer-in charge.

Excavation in soil item-B

Earthwork in excavation of cut-off trenches by the hydraulic excavator as per designed section in soft rock (Where blasting is not needed) (vide type of soil item -C) with disposal of soil beyond 1/2 km from centre of trench but upto 1 km with all lifts by tipper including construction and maintenance of haul road all complete as per specification & direction of E/I.

Supplying labours, tools and tackles, lubricant etc. for laying and jointing C.I. S/S tyton pipes (class LA) trenches supplying rubber gasket (Rubber gasket confirming to I.S.S.-5382-1969) and making gasket joint including providing night guard, barrier and red light to safe guard against accident, all complete (Pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S.S. 3114-1985) as per design, specification and direction of E/I.

DI K-9, Dia 100 mm. (11106+10589+1350+1336) = 24381

DI K-9, Dia 150 mm. (2755+14504+19401+8714) = 45374

DI K-9, Dia 200 mm. (8330+9428) = 17758

DI K-9, Dia 250 mm. (3742+7685) = 11427

Lowering & laying and fixing in proper alignment and position all types of CI air valve as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all materia and giving satisfactory hydraulic testing etc. complete. (for all class of valves)

25 mm dia Air valve

Supplying labour and tools for fixing C.I. sluice valve in trenches with pair of C.I. Tail piece including making laed caulked joints and flanged joint as per I.S.S. specification including supplying all jointing material (pig lead confirming to I.S.S 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and bolt confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I.

DI K-9, Dia 100 mm. (11106+10589+1350+1336) = 24381

DI K-9, Dia 150 mm. (2755+14504+19401+8714) = 45374

DI K-9, Dia 200 mm. (8330+9428) = 17758

DI K-9, Dia 250 mm. (3742+7685) = 11427

Earthwork in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge (for classification of Soil item A & B).

Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.

(i) 100 mm dia

(ii) 150 mm dia

Lowering, laying and fixing in proper alingment and position all types of C.I. D / F angle type spring loaded pressure relief valve including cost material labour, cost of conveyance from stores to site of work and giving satisfactory hydroulic testing etc. complete. (for all class of valves).

(i) 100 mm dia

(ii) 150 mm dia

Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20M.x 0.90M. x 1.50M. inner size having 25cm. thick 75A brick masonry wall in C.M. (1:6), over 150mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150mm. thick with 20mm. to 6mm. graded stone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.

Providing P.C.C. M-150 with nominal mix of (1:3:6) in foundation with approved quality stone metal (20 mm to 6 mm Size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of Engineer -in charge

A) Thrust Block

Above 200 mm & upto 300 mm dia.

DISTRIBUTION MAIN

Earthwork in excavation (as per I.S. 3114/1965 for laying of different type and sizes of pipe so as to give one meter avarage cover over the socket of pipes with disposal of excavated with in initial lead and lift as per specification and direction of engineer-in charge.

Excavation in Soil item-B

Earthwork in excavation of cut-off trenches by the hydraulic excavator as per designed section in soft rock (Where blasting is not needed) (vide type of soil item -C) with disposal of soil beyond 1/2 km from centre of trench but upto 1 km with all lifts by tipper including construction and maintenanceof haul road all complete as per specification & direction of E/I. (Excavated hard rock size should not be more than 150 lb.)

Excavation in Soil item - C

Cutting the road as well as restoring the same as per specifications and as directed by Engineer incharge

Pucca Road (Except black top only taken out material to be used) 40%

Waterbound Macadam road(taken out material will be used) for cutting as per requirement 50% of the restoring work

Dismantaling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 meter lead and disposal of unservisible materials with all leads complete as per direction of E/I

Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of store chips 20 mm-6 mm size graded and clean coarsed sand of FM 2.5 to 3.0 including screeing shuttering mixing cement concrete in mixer and placing in position vibrating striking curing taxes and royalty alll complete as per building specification and directio of E/I.

Earthwork in backfilling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-charge.

Providing and Supplying ISI mark Confirming to IS-8329/2000 centrifugally cast (spun) DI pipe for water works with socket and spigot ends in standard working lengths of 4.5,5.5 & 6 m for classification K-7 suitable for push on joint (Rubber gasket D Jointing) with cement mortar lining inside the pipes with outside zinc and bituminous coating (including cost of one gasket for each pipe) Note: - Rates are F.O.R. Jharkhand but excluding of GST.

100 mm dia. DI K-7

150 mm dia. DI K-7

200 mm dia. DI K-7

Providing and supplying ISI standard DI specials & fittings with sealing rubber gasket of SBR, complete with cast iron follower gland and MS nut bolts coated or otherwise protected from rusting and suitable for DI Pipes complete as per IS - 9523 Class K-12. Note: -Rates are F.O.R. Jharkhand but excluding of GST.

Supplying labours, tools and tackles for testing of laid CI or U.P.V.C. OR H.D.P.E. OR A.C. pressure pipe upto 60m head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmently)

100 mm dia. DI K-7

150 mm dia. DI K-7

200 mm dia. DI K-7

Supplying labours, tools and tackles, lubricant etc. for laying and jointing C.I.S/S tyton pipes (class LA)/D.I. trenches without rubber gasket (Rubber gasket making gasket joint including providing night guard, barrier and red light to safe guard against accident, all complete (Pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S.S. 3114-1985) as per design, specification and direction of E/I.

100 mm dia. DI K-7

150 mm dia. DI K-7

200 mm dia. DI K-7

Cutting and champhering of pipes of following diameters including cost of all materials and labour involved,etc. complete as directed by Engineer-in-charge (for all class of pipes)

100 mm dia. DI K-7

150 mm dia. DI K-7

200 mm dia. DI K-7

Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrengements as per test pressure stainless steel spindle, caps including all taxes transportation complete

Sluice Valve

100 mm dia.

150 mm dia

200 mm dia

Scour Valve

100 mm dia.

Supplying labour and tools for fixing C.I. sluice valve in trenches with pair of C.I. Tail piece including making laed caulked joints and flanged joint as per I.S.S. specification including supplying all jointing material (pig lead confirming to I.S.S 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and bolt confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I.

100 mm dia.

150 mm dia

200 mm dia

Scour Valve

100 mm dia.

Supplying all materials, labours, tools and equipment and constructing brick masonry chamber of 1.20M.x 0.90M. x 1.50M. inner size having 25cm. thick 75A brick masonry wall in C.M. (1:6), over 150mm. P.C.C. M- 150, laid over one brick flat soling on 100mm. local sand filling, including 12mm. thick cement plaster with punning of inner surface and exposed surface of B/W in C.M. (1:6) and R.C.C. M- 150 cover slab 150mm. thick with 20mm. to 6mm. graded stone chips, and clean coarse sand of F.M. 2.5 to 3 including providing CI surface box and screening shuttering, mixing, placing, striking, curing, taxes and royalty all complete as per approved design, drawing & specification and direction of E/I.

House Connection for 8124 nos. Consumer.

Earth work in excavation (as per I.S. 3114/ 1965 for laying of different types and sizes of pipes so as to give 1 m av. cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/l. (For soil item B)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).

Provinding P.C.C M-150 with in norminal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including , screening , shuttering, mixing cement concrete in mixture and placing in position vibrating striking curing taxes and royality all complete as per building specifiaction and direction of E/I

Centering & Shuttering

Earth work in back fillingthe trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(For soil item A & B)

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and supplying blue MDPE pipes confirming to ISO 4427:1996 manufactured from vergin resin PE 80 food grade compounded raw material having blue colour only assurance certificate from quality agencies like WRC / CIPET ( India) / DVGM / KIWA / SPGN etc. for usage in drinking water with quality system. The cost shall including cost all taxes, inspection charges transprotaion to work site and earth work involved, all complete job as per specification and direction of E/I. 20 mm dia pipe.

Providing and supplying G.I. pipes (Tata and equivalent make) for usage in drinking water with quality system, The cost shall include testing of all materials all taxes central, State, Municipal, Inspection charges transportation up to site transite insurance, loading, unloading, stacking etc. complete as specified and directed.

Lowering laying and jointing HDPE / MDPE pipe in proper position including all specials by Compression fitting / Electrofusion and But fusion jointing procedure including hydraulic testing as er relevent IS Code complete with all materials for jointing procedure like Electrofusion machine ,Electric mirrior/heater/But fusion welding machine with hydraulic testing and all labours as directed by engineer in charge as per IS-7634 part II

Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of E/l. (Pipe with socket to be supplied deparmentally free of cost).

Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dia ferrule weight not less than 425 gram

Providing and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/ (a) 20 mm dia and weight not less than 400 gram.

Providing and fixing 15 mm Dia male ended C.I Body Brass Spindle valve and seat bib cock of approved quality (Wt.not Less than 400 gms.) with extra socket all complete as per specification and Direction of E/I.

Supplying and fixing G.I. fittings of Approved make all complete as per specification and Direction of E/I

Elbow 20 mm

Elbow 15 mm

Reducing Socket 20 mm

Nipple 20 mm

Nipple 15 mm

Union Socket 20 mm

Socket 15mm

Socket 20 mm

Carriage of materials

Operation & Maintenance for Five years

O/M work with Labour component & Materials for 1st Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 2nd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 3rd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 4th Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 5th Year

As per SBD Section - 5 Clouse 9.10

Labour Cess @ 1%

JMC Projects (India) Limited

Sudhakara Infratech Pvt Ltd

LARSEN AND TOUBRO LIMITED