Jalakandapuram Town Panchayat General Fund Bus Shelter -2024- 2025

Amount

Dismandling damaged p.c.c including cost and Conveyance of all Material and all otherLabour charge for coveying the material from site etc. with standard specifications.

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 B. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.

Ordinery Soil

Plain Cement Concrete 1:4:8 Mix (one part cement, four part M sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Column Matt and Grade Beam

Column

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Plain Cement Concrete 1:1.5:3 Mix (one part cement, one point fivepart M sand and Three Part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete

Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc, in all floor with two coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with Standard Specification. ( The Make, Quality and colour of paint should be got approved by the engineer in charge before use on works )( TNSS NO or NBC No 61 V VI (54) 3)

Fabricating, Supplying and Errecting the Pre Engineer Steel Building Structure using Galvanised Structural Steel Structure Confirming to Grade 50 with Yield Strength of 345 Mpa Base Plate,sag rods ,Stutts including cleats to receive Z or C Purlins cutting,Drilling holes, Welding,Grinding fixing the Members with Necessary Bolt,Nuts, Anchor Bolts with approved quality of Hosting,Aligning and Plascing the T section in Position as per Design got approved from the deparment. fixing Purlin with Sag rods,supporting tje Purlins from the Beams on both side.The welding Shoud be done with submerged arc welding to full lengt. the rate inclusive of the cost of the painting the members with one coat of Primer of Zinc chromite and Enamel paint etc Complete complying with standard specifications

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC OPEN light point / Fan point (For Electronic regulator). etc, complete as per standard specifications.SD 22

Supply and Delivery of 1.5 meter, 50mm dia. GI pipe Bracket suitable for the LED fittings for 90W to 120W with 2 sets of clamps made up of MS Flat size 32mmx6mm with Galvanization suitable for EB RCC/ Tubular / Rail poles including necessary bolts and nuts as per the department engineer instructions.

Supply and fixing of 90 W LED Street light fitting in the Existing EB Empty Pole system made of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65. Separate compartment for LEDs & electronic driver with CCT of 5700k, PF >0.90 System Efficacy >85 . Operating voltage range of 120V to 270V with surge arrestor minimum of 1 kv. Driver current not less than 700mA, THD< 10%.Lumens package not less 100 LM/w for LED Source. Test certificate from NABL 9National accredited board for Testing & Calibration laboratory) for LM79 report.In house Testing facility to be available for the same.Lamp life not less than 50,000 Hours etc ; complete as per standard specification .3 RM Supply and delivery of 3 core 1.50 sqmm Flexible cable with ISI mark. Supply and Delivery of 25 mm dia "B " Class (L Shape) GI Bracket , Supply and Delivery of 7" x 3" x 4 mm RCC Post Clamp Size 25X3mm thickness with 6 Nos of 5/8 " Full thread 2 " MS Bolt nuts. Labour charges for Fixing of New 20 W LED Lamp fittings complete set and including all necessary items. As directed by departmental officers etc Complete.