SPECIAL REPAIR TO CERTAIN SMQs AT ASP AF STN GURGAONUNDER GE (AF) GURGAON NO.1

Amount

Sch 'A' Part-I Bldg Work (B/R Works)

Demolition of RCC of any descrition and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

M&L for RCC 1:1.5:3 type B-1 using (20mm graded stone agg) (Nominal Mix) for chajjas complete all as specified and directed.

Chipping of unsound/weak concrete of 35 mm average thickness material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. including Cutting of rusted reinforcement bars of any dia and stacking of all debris outside the building at specified location n. exe 50 m and final disposal of debris for all lead and liftsoutside the MoD land complete all as specified and directed

Cleaning of reinforcement of any dia from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, including painting having coating as per manufature instruction but not less than one coat with anti rust paint of approved brand (ISI marked) (as approved by GE) all complete as per direction of Engineer-In-Charge. NOTE:- The photographic Evidence of all the works shall be kept in record and shall be produced when demanded. The contractor shall submit purchse voucher of rust removed and anti rust paints for claimimg payment

Providing and fixing hard drawn steel wire fabric of any mesh size having dia of wire not less than 4mm to be fixed & firmly anchored to the concrete/Brick surface by means of "L" shaped mild steel shear key welded with existing reinforcement or by means of suitable fastners including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. NOTE: 1. 10mm dia L shaped mild steel shear key/fastners to be provided at 0.5 mtr centre to centre in each direction.

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge

Providing, mixing and applying Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect

Providing, laying and applying the layer of 35 mm average thick cement mortar 1:2 {1 cement: 2 coarse sand) with the help of shotcreting/guniting equipment etc at a pressure not less than 1 bar (100Kn/m2) andsurfaces finished with trowel complete all as specified and directed Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket. The quoted rate shall include Shear Keys, centering and shuttering, strutting, propping etc and exclude cost of reinforcement and bond coat

M& L for 10 mm above Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing cracking, bending soirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips complete all as specifed and directed.

M& L for 6 to 8 mm Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing cracking, bending soirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securong with clips complete all as specifed and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each including cutting holes in brick wall/ concrete wall and making good after fixing the new chowkhat all as specified and directed

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each including cutting holes in brick wall/ concrete wall and making good after fixing the new chowkhatall as specified and directed

S & F pressed steel frames of size 165 x 60 mm manufactured from commercial mild steel sheet of 1.60 mm thickness for doors with one or more rebates including necessary fixing hold fast lugs, Hinges, lock strike plate and including filling of frame with cement conrete 1:3:6 type C1 including making good the wall with plaster in CM 1:6 etc complete all as specified and directed. Note:- The inner side shall be painted with hot blown Bitumen before filling with PCC and the quoted rate shall be inclusive of same

S & F pressed steel frames of size 125 x 60 mm manufactured from commercial mild steel sheet of 1.60 mm thickness for doors with one or more rebates including necessary fixing hold fast lugs, Hinges, lock strike plate and including filling of frame with cement conrete 1:3:6 type C1 and includig making good the wall with plaster in CM 1:6 etc complete all as specified and directed. Note:- The inner side shall be painted with hot blown Bitumen before filling with PCC and the quoted rate shall be inclusive of same

S & F 35 mm thick 2nd class Hard wood glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze etc having dimension as per Section 8.24(a) of SSR part- I and fitted to chowkats complete all as specified and directed.

Providing and fixing ISI marked 30 mm thick flush door shutters conforming to IS : 2202 (Part I) both side decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including fixing with chowkhat with necessary screws complete all as specified and directed..

Providing and fixing glazing with mosquito proof net with stainless steel wire cloth 0.36mm nominal dia of wire average width of aperture 1.40mm in panelled/skelton door, window, ventilator shutters and partitions etc. complete all as specified and the directed .

Providing and fixing glazing With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in door, window, ventilator shutters and partitions etc. with necessary fittings complete all as the directions of engineer-in-charge

Providing and fixing aluminium hanging floor door Twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete

Providing and fixing aluminium sliding door bolts of size 250x16 mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing 150 mm long aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

Providing and fixing 100 mm long aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

Providing and fixing 100mm long aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

Providing and fixing 150mm long aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

Providing and fixing ISI marked aluminium butt hinges of size 100x75x4 mm anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete all as specified and directed.

S & F mild steel 300 mm , ordinary rat rail rod pattern springs including rollar and rollar plate complete all as specified and directed.

Providing and fixing in repair chromium plated plated 20 mm (heavy duty) M.S. pipe curtain rods with chromium plated plated fancy brackets complete all as specified and directed.

Providing and fixing factory made PVC door frame made of PVC extruded sections having an overall dimension Extruded section profile size 50x47 mm (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer in-charge

Providing and fixing Factory made solid panel PVC door shutter 30 mm thick (style) fixing to existing door frame consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete as per manufacturer's specification and direction of Engineer-in-charge. NOTE: - (i) The size of rails, styles and other element shall be as per drawing mentioned at Srl Page no. 176 of SSR -2020(Part-II) under section 8 for item no. 08080. (ii) The contractor shall submit PV for claiming payment of this item, the non-submission may lead to nonpayment against this item.

S&F 18 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with SS screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. Note:- (i) One set comprises of two telescopic channel. (ii) Runner/ Channel should be SS 304 grade and load capacity should not be less than 50 kgs

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified and directed.

Providing and fixing magnetic catcher Double strip (horizontal type) of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in charge. NOTE:- (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)

Providing and fixing cupboard shutter with 18/19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. including bright finished stainless steel piano hingesetc. complete as per direction of Engineer-in- harge. (Payment of providing and fixing two no. 75mm stainless steel hinges shall be paid separately)

Extra over item of Prelaminated particle board for external PVC edge lipping, 2mm thick, fixed with hot glue suitable for 18mm thick complete all as specified and directed.

S&F 30mm bright finished stainless steel piano hinges fixing with necessary screws etc., complete.

S &F Hasp and staple, Alumimium anodised length 75mm length, including bolt to hinge plate and fixed with screws complete all as specified.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length complete all as specified (quoted rate is inclusive of S&F 200 mm 25x3mm thick hold fast lugs or dash fastenery).

S & F 500 ltrs Rotational moulded polyethylene water storage tanks three layer (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position including diamantling and stacking at specified location including S&F of ball valvs of 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and GI adptaor all as per specified and directed.

Taking up or down any dia of bore galvanised iron tubing and connection and stacking complete all as specified and directed.

S & F 15 mm nominal dia ISI marked GI tubing medium grade conforming to latest IS-1239 (pt-I) with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified.

S & F 20 mm nominal dia ISI marked GI tubing medium grade conforming to latest IS-1239 (pt-I) with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified.

Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc all as specified (i) Rate of Cleaning of taking down pipe is included in quoted rate (ii) Rates quoted by the contractor deemed to be included S & F new fittings as required

Refixing only old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors etc all as specified (i) Rate of Cleaning of taking down pipe is included in quoted rate (ii) Rates quoted by the contractor deemed to be included S & F new fittings as required

S & F 20 mm bore stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe all as specified and as directed

Taking down cement plaster including raking out joints hacking for key and scrubbing down with water

M & L 10 mm thick rendering in CM (1:6) on vertical surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed

M & L 15 mm thick rendering in CM (1:4) in two layers of 10mm under layer and 05 mm upper layer on vertical surfaces of brick walls finished even and smooth without using extra cement with using water proofing compound @ 2 % by weight of cement in upper layer only complete all as specified and directed. (WPC will be measured and paid separately)

M & L for rendering 5 mm thick on ceiling on fair faces of concrete surface in Cm 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coat of distemper oil emulsion by Auto Roller over a coat of primer over 1 to 2 mm thick birla putty punning including finishing by sanding machine and Auto roller including necessary prepartion of new surface complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying two coats of cement base paint of approved tint over coat of chack primer on walls,facia and chajja complete all as specified.

M&L for preparation of newly plastered surfacesapplying 3 coats of white washing on internal/ external ceiling complete all as specified.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or grith and applying two coats of synthetic enamel paint (ISI marked)over a coat of pink primer complete all as specified and directed.

M&L for applying (ISI Marked) two coats synthetic enamel paint of approved pattern over a coat of red oxide zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth complete all as specified and as directed.

M&L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for applying two coat of distemper oil emulsion by Auto Roller over a coat of primer over 1 to 2 mm thick birla putty punning including finishing by sanding machine and Auto roller including necessary prepartion of old surface by removing old treatment complete all as specified and directed.

M&L preparation old treated surface by complete removal of existing treatment of wall and applying two coat of cement base pant over a coat of primer complete all as specified and as directed.

M&L for preparation of old surfaces of wood or wood based materials over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation old decorated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and stackig at loaction as specifed complete all as specified and directed

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. (Fe 410-W (Gde E-250) quality B)

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 marble chipping 5 to 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water (mixed with H2SO4 @ 5% scrubbing and washing shall continue till the stone chipping are sufficiently exposed to its natural colour) to expose the stone chippings complete all as specified. Note:-(i) (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Dismantling of cast iron drain pipe 100mm dia jointed in lead joints or cement joints and taking out of under floors if required

M&L Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation and getting out in Soft/loose soil complete all as specified and directed .

Removing excavated soil exc. 250m but n exc 500 m & depositing where directed

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.

Cutting into existing man holes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required as 150mm dia.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for brick work with old size burnt clay bricks, sub class B, straight or curved on plan exc 6m mean radium built in cement mortar 1:6 complete all as specified and directed.

M&L 75mm thick pre-cast factory made Manhole/ drain cover slab of size as per site requirements in RCC 1: 1. ½ : 3 type A1 set in cement mortar 1:4 including necessary form work complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

Providing and fixing on wall face ISI marked unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,Single socketed pipes 110 mm diameter including fixing with wall with MS clamps at adequate interval not more than 1.5m complete all as specified and directed.

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (A) 110 mm bend 87.5 degree with access door

Providing and fixing on wall face ISI marked unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,Single socketed pipes 75 mm diameter of any length fixed towalls/laid in floors/trenches complete all as specified and directed.

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (A) 75 mm bend 87.5 degree with access door

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (A) Single tee with door (Y-Shaped) 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (A) Single tee with door (Y-Shaped) 75x75x75 mm

Supply and Fix PVC (SWR) Vent cowl suitable for 110mm dia vent pipe.

Supply and Fix PVC (SWR) Vent cowl suitable for 75mm dia vent pipe.

S&F PVC floor trap,75mm outlet dia plain with grating including joining with solvent cement all as specified and directed

S&F PVC gully trap,125/110mm outlet dia including joining with solvent cement all as specified and directed

S&F Shelf of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (minimum weight 300gm)

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75 mm thick, PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in path , plinth protection and paving laid in panels finished even and smooth without using extra cement complete all as specified and directed. Note:- The groove demarcating panels shall be filled with hot blown bitumen

Demolition of cement concrete in ground floors and pavings exc 15 cm thickness above ground level as in sunken floors etc

M & L 50 mm thick PCC 1:2:4 type B0 using 12.5 mm graded aggregate using water proofing compound as in sunken floor(WPC shall be measured and paid separately)

M & L Applying evenly a coat of blown type bitumen at the rate of 1.50 kg/sqm and binding with clean dry sand @ 0.05 cum per sqm

M & L for rendering 15 mm thick in CM 1:3 with using water proofing compound (WPC shall be measured and paid separately) all as specified

Supply only integral water proofing compound of approved quality

M & L PCC 1:5:10 type E2 as in sub base of floor mass filling using 40 mm graded aggregate with using water proofing compound

S & F I repair GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 32 mm bore (Spout pipe for sunken portion) complete all as specified.

S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket and including fixing of tap, waste fitting and union complete all as specified and as directed.

Supply and fixed in repair 15 mm dia bore pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and flynuts, screwed for iron pipe and fixed complete all as specified and as directed

Supply & Fix 32mm dia waste cupling fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed

S & F in repair 15 mm chromium plated cast copper alloy bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F Brass CP kitchen sink mixer for mixing hot & cold water screwed down for iron pipe all as specified and as directed by Engineer-in-charge.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe all as specified and as directed by Engineer-in-charge.

S & F in repair15 mm dia bore angle Cock with Flange chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.

Providing and fixing in repair Stainless Steel A ISI 304 (18/8) Kitchen sink with drain board as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe with Over all size 510x1040 mm bowl depth 250 mm 510x1040 mm bowl depth 178 mm complete all as specified and as directed.

S&F in repair Brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) including shower arms 15 mm size 195 mm long with bend complete all as specified.

S & Fin repair vitreous China squatting pan of Orrissa pattern of approved make of size 630 mm X 450 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including CI 'P' trap dia 100 mm thick complete all as specified .

S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make

Material and labour for First quality Non-skid Ceramic coloured tiles jointless, 7-8 mm thick (area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm) laid in floors with neat cement slurry @ 3Kg/Sqm over and including 15mm thick screed bed of cement mortar (1:6) and including pointing in white cement with pigment to match the shade of tiles including dismantling of floor, hearth or wall tiling including cemetn mortar bedding complete all as specified and directed.

Material and labour for First quality Non-skid Ceramic coloured tiles jointless, 7-8 mm thick (area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm) in skirtings/ walls and other similar locations jointed with neat cement slurry @ 3Kg/Sqm over and including 10mm thick screed bed of cement mortar (1:3) and including pointing in white cement with pigment to match the shade of tiles including dismantling of floor, hearth or wall tiling including cemetn mortar bedding complete all as specified and directed.

Material and labour for First quality Glazed ceramic coloured tiles in vertical surface of 7 to 8 mm thick set and jointed in neat cement of required shape and size as in skirting/dado etc set and jointed in neat cement slurry @ 3kg/Sqm over & incl 10 mm thick rendering in CM 1:4 and pointed in white or coloured cement to match including dismantling of floor, hearth or wall tiling including cemetn mortar bedding complete all as specified and directed.

Material and labour for Machine cut kota stone flooring 20-25 mm thick (size of kota stone slab not less than 55cm X 55cm) laid and jointed with neat cement slurry @ 3Kg/Sqm mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over and including 20 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and as directed.

Material and labour for Machine cut kota stone 18-25 mm thick as in riser and treads of steps,skirting,dado including rubbing and polishing to mirror finish jointed with neat cement slurry @ 3Kg/Sqm over and including 10mm thick backing plaster in CM 1:4 & roughening to existing conctere/terrazo surfaces complete all as specified and as directed.

Rounding to edge of stone slabs one edge such as steps, cooking platform and other similar situatiion

M&L for machine cut granite stone 16-18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for window sills,and similar locations of required size, approved shade, colour and texture laid over and including 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. at all levels complete all as specified and directed.

M&L Cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) 75mm thick for surafce finish complete all as specified and as directed.

M&L Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry @ 3kg/Sqm mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:6 (1 cement: 4 coarse sand) complete all as specified and as dierected. NOTE:- 1. The Contractor shall submit sample of ISI approved make along with test certificate.

S&F repair M.S square/circular tube M.S pipe etc conforming to IS-1161-1979 garde grade ST 240 fixed with fastener ERW or induction but welded complete all as specified and directed.

Providing and fixing Plain mild steel wire of dia 3.15mm, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) complete all as per specified and directed.

M&L APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms /Sqm ) over and including a coat of cold applied bitumen 85/25 based primer on entire surface @1.20 Kg /Sqm over and including 10mm thick rendering in CM 1:4 using water proofing compound at the rate of 3% weight of cement over and PCC 1:2:4, type B1 by using 20mm graded stone aggregate in padding/mass concrete and haunching in required slope to avoid any logging of water on dry and cleaned roughned surfaces including demolition of existing treatment of APP/Mud Phuska/BrickTile etc. and stacking the same at the location specified by GE at distance n.exe 100 m including preparing surfaces , cleaning surface of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete all as specified & directed. Note : 1. The two coat of Aluminum painting over APP shall be carried out after placing of Solar Panel on mounting structure. The cost of the same shall be included in quoted rate. 2. The contractor shall submit Purchase voucher of APP, Aluminum Paint to GE for claiming payment. The same shall be fwd to office of Accepting officer along with final bill.

M&L cement concrete type B-0 1:2:4, (12.5mm graded stone aggregate) , in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing

Sch 'A' Part-II Bldg Work (EXTERNAL ELECTRIFICATION WORK)

Excavating in trenches n exc. 1.5 m wide and n. exc 1.5 m in depth, foundation etc for shafts, well, cesspits , manholes, pier holes etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and directed .

Material and labour for Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing excavated material n.exc 50 M and depositing where directed at a level n.exc 1.5 M above starting point complete all as specified and directed.

M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm and after punning down sand cushioning will be 18 cm complete all as specified and directed . Note : 18 cm thick only will be considered for payment purpose.

M&L for old size burnt brick, sub class 'B', laid in trenches, abutting each other with a gap not exceeding 10 mm vertically over the cable for cable protection complete all as specified and directed.

Supply and fixing GI pipe Light grade 50 mm bore (ISI marked) laid in trenches/ path /road crossings/ fixed to poles/ceiling/ along walls/ path /drain/floors with and including all necessary clamps, nuts, bolts, washers etc and all fittings as required, complete all as specified and as directed. (Note:- Necessary excavation and earth work shall be measured and paid for separately)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core including dismantling and taking out old existing cable complete all as specified and as directed.

M& L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground(earthpit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip of 32 x 6 mm with GI Pipe 40mm Light grade for protection by means of bolts, nuts and check nuts and washers of GI or steel all as shown in Electrical plate No 3 including earth work funnel with watering arrangement, wire mesh, GI pipe 20mm internal dia light grade buried directly vertical and adjacent to the electrode for watering , PCC pit 1:3:6 type C1 and RCC chamber cover in 1:2:4 type B1 of size 550 x 550mm with 8 mm dia TMT bar of 100mm C/C both ways including of returning, filling in and removal of surplus soil to a distance not exc 50 m as specified and directed by Engr-in-charge including testing on completion. Note: The strip/wire upto 7.5mtr included in the quoted rate.

Supply, installing, testing and commissioning factory made and tested LT Panel Outdoor type, size of 900 X 1050 X 450 mm platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system. Shall be dust and vermin proof, protection class (IP-42) and made of 3.15 mm thick CRCA SHEET & suitable frame work/ support made out of 50 x 50 x 6 mm Aluminium, front opening type with space for cable entry from back side of the panel, with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal work including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyster powder coating of Siemens grey RAL- 7035 shade complete with necessary PCC (1:3:6) foundation work as directed at site.

The panel manufacturer should have following Govt. Approved Certificates: 1. CPRI Certification Degree of Protection IP-54 2. CPRI Short Circuit withstand strenght should be 50kArms for 1.0 Sec with intial peak of 105kA 3. CPRI Certification Rated current for short circuit not less than 4000 A with rated insulation voltage 660V 4. ISO 9001 CERTIFIED

Sch 'A' Part -III : Bldg Work (INTERNAL ELECTRIFICATION Work)

Taking down copper/aluminium point wiring (light points) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed in and including PVC conduit with all fittings including ISI PVC conduit 20mm medium grade and PVC insulated FRLS copper conductor cable of size 1.5 sq mm as earth wire all as specified and as directed by Engr-in-charge, (The works includes cutting and making good disturbed surfaces and rate deemed to included in quated rate):-

One light point controlled by one way modular switch all as specified and directed.

One ceiling/mounted fan point controlled by one way modular switch all as specified and directed.

One exhaust/Ventilation fan point controlled by one way modular switch all as specified and directed.

One 3 pin modular socket outlet 5 amps on the same board with the other switches, with cable 1.5Sqmm size.

One 3 pin modular socket outlet 5 amps on the independent board with the other switches, with cable 1.5Sqmm size.

One bell/buzzer point controlled by one push button on the same board with other switch or independent with cable 1.5sqmm size

All as per the item ser No 138 here in but with copper conductor cable for 3pin socket outlet,15 Amps independent with cable 4sqmm size and 4 sqmm earth continuity conductor, complete all as specified and as directed.

M&L in replacement sub main wiring three run of 06 sqmm PVC insulated unsheathed copper conductor cable ISI marked 1100 volts grade drawn in and including PVC surface conduit suitable size of medium grade fixed on wall/ceiling/passing through wall etc connected as required at site complete all as directed. (For AC connection ) Note- (a) Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit). (b) Making disturbed surface good to wall/floors as existing surface.

Supply and fixing ceiling rose surface Bakelite 65 x 50mm, 3 terminal complete all as specified and directed.

M&L for taking down of ceiling fan and painting with one coat of synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc. and refixing the same including cable from ceiling rose to connector to fan complete all as specified and driected.

Taking down and re fixing exhaust/Ventilation fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and driected.

Taking down and re fixing Geyser with all its nut and bolts all as specified and directed.

Taking down and re fixing LED Tube fitting 20Watt complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. Note:- Rate quoted for items includes cost of all civil work like cutting to wall ceiling, floor, filling with PCC, finishing the surfaces with existing to match etc.

S&F in replacement bell AC 230 Volt single pole complete all as specified and directed.

S&F in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in replacement bell push 6 Amps , 1 module complete all as specified and directed.

Supply & fix in replacement modular switch 1way 6A,1 module complete all as specified and directed.

Supply & Fix in replacement modular Socket, 6A-2/3 Pin combined 2 module complete all as specified and directed.

Supply & Fix in replacement modular switch socket combination outlet 3 pin, 5 Amp flush type complete all as specified as and directed.

Supply & fix in replacement switch socket combination 16A, 6Pin, 3Module independent complete all as specified and as directed.

Supply and fix in replacement modular Fan step regulator, 120W - 2 module complete all as specified and as directed.

S&F in replacement Modular flush box 6 module complete all as specified and as directed.

S&F in replacement Modular flush box 4 module complete all as specified and as directed.

S&F in replacement Modular flush box 3 module complete all as specified and as directed.

S&F in replacement Modular flush box 1/2 module complete all as specified and as directed.

S&F in replacement White cover plate with frame, 1 module complete all as specified and as directed.

S&F in replacement White cover plate with frame, 2 module complete all as specified and as directed.

S&F in replacement White cover plate with frame, 3 module complete all as specified and as directed.

S&F in replacement White cover plate with frame, 4 module complete all as specified and as directed.

S&F in replacement White cover plate with frame, 6 module complete all as specified and as directed.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Taking out old DB box of any size including MCBs/MCCBs removing materials to store or as sch of credit including making good of existing surfaces complete all as specified and as directed.

Supply and fix sheet metal enclosures for double door DB's when MCBs to be used single pole & neutral 12 way with 200 Amps rated bus bar complete all specified and directed.

Supply and fix sheet metal enclosures for DB's when MCCBs to be used Triple pole & neutral 4 way with AS per IEC 61439-3 suitable for Flush Mounting and Surface Mounting with 250 A Copper Busbar for each phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, Fully insulated busbar & shrouded Neutral bars, improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 43 & IP 54 DB's, with provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing 200 Amps rated bus bar complete all specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB with connection testing and commissioning complete all specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity SPN 40 Amp in the MCB DB with connection testing and commissioning complete all specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity SPN 63 Amp in the MCB DB with connection testing and commissioning complete all specified and directed.

S&F MCCB 63Amp , 415V,16KA,4Pole complete all specified and directed.

Dismantling and taking up old existing unserviceable GI earth plate with GI strip earthing and connected items and making of good the existing surface complete all as specified and as directed.

M& L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground(earthpit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead with 4mm dia with protection pipe 15mm GI Light grade PIpe by means of bolts, nuts and check nuts and washers of GI or steel all as shown in Electrical plate No 3 including earth work funnel with watering arrangement, wire mesh, GI pipe 20mm internal dia light grade buried directly vertical and adjacent to the electrode for watering , PCC pit 1:3:6 type C1 and RCC chamber cover in 1:2:4 type B1 of size 550 x 550mm with 8 mm dia TMT bar of 100mm C/C both ways including of returning, filling in and removal of surplus soil to a distance not exc 50 m as specified and directed by Engr-in-charge including testing on completion. Note: The strip/wire upto 7.5mtr included in the quoted rate.

Schedule of Credit

Phogat Builders

P R Constructions

Atish Builders LLP

M/S Parshant Associates