ELECTRIC WORK

Amount

fo|qr uxjh; forj.k [k.M] cqyUn”kgj ds vUrxZr iw.kZ tek ;kstuk esa 03 fd0ok0 la;kstu fuxZr djus gsrq ,y0Vh0 ykbZu fuekZ.k ,oa laLd`fr ,UDyso dk ckg~; fo|qrhdj.k dk dk;ZA

Carriage of fallowings from ESC. BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, rcquricd for proper completion of work, distance about to 60 Kms.

S.T Pole 11 Mtr. Long

PCC Pole 8.5 mtr Long.

Carriage of All line Material from store center BSR to j.e store Sub station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Erection of Single pole support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of Double pole/Scation Pole support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Double pole support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Carriage of All line Material from J.E store Sub station to Pit Site ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Cutting /drilling /Welding of MS Angle iron for making guarding angle size 65x65x6/50x50x6 mm including the work of fixing the bracket on PCC/ST pole for construction of the line.

Carriage of T/F from ESC. BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, rcquricd for proper completion of work, distance about to 60 Kms.

400 KVA T/F

fixing of 11 Kv Stay rod with Stay wire in proper way with Nozelling

11Kv TPMO SWITCH

Laying, sagging. Stringing and binding and jumpering of ACSR Weisal , rabbit, dog newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

ACSR weisal conductor

ABC Cable 3*50 Square MM

ABC Cable 3*120 Square MM

Fixing of Earthing rod

Fixing of pin insulator

Fixing disc insulator

Grouting of 11 Kv Stay rods

Providing & Fixing of Distribution Box 3 Phase

Fixing of 11Kv TPMO SWITCH

Providing & Fixing of 11Kv fuse set

Mounting & Installation of T/F From Plinth

Providing & Fixing of 400 KVA T/F Fencing

Providing & Fixing of 400 KVA T/F Plinth

The folloing material is required to be supplied by the contractor.

Holding clamp.

Chemical Earthing complete

J hook

dead & clamps

Pearcing clamps

Suspension clamps

Danger Board

Alluminium Paint

Red oxide Paint

Bolt & nut off size.

Vivek Electricals

M S Enterprises