SITC of Fire fighting and alarm system at psychiatrist Building (Gplus4), MKCG, MCandH, Berhampur.

FIRE RISER-Supplying, installation testing and commissioning of the following-: ‘C’ class MS Pipe as per IS1239 for underground/over ground pipes with welded / flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the client and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overheads pipes and providing and fixing pyp kote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm) etc.Make-Tata/Jindal/Sail.Complete as per ASTM standards/IS: 10221 for corrosion protection of pipes for the underground installation.Note: The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest applicable codes & standard before applying paint or pipe coating or wrapping etc. complete. size 150 mm

Supply and installation, testing and commissioning of CI Butterfly valves ( control of each shaft) ) conforming to BS 5155 ,PN 1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open and shut position as per fire practice etc complete.Make-Zoloto/Audco/Leader. 150 mm

Providing and fixing Single headed hydrant having outlet of 63 mm dia (2.1/2”) N.B. hydrant (IS:5290) landing valve in Stainless Steel Morris Pattern instanteous coupling type TAC / LFA approved & ISI certified heavy type hydraulically tested to 1.5 times working pressure with necessary nuts, bolts etc.Make-Newage/Minimax/Fireshield/Safex

Providing & fixing 63mm dia RRL hose pipe a 15 mtr length per IS 636 TYPE A TAC/ LFA approved of standard length of approved pattern and size including gun metal male and female Coupling duly bound with copper wire etc. complete.Make-Newage/Minimax/Fireshield/Safex

Providing and fixing TAC approved fire hose cabinet to house fire hydrant & hose, including all other related accerrories fabricated from M.S. sheet (2mm thick) of fully welded construction having front door with locking arrangement, partially glazed with 4 mm thick glass. Cabinet shall be powder coated & painted with post office red colour of size as mentioned in drawing (or as approved by the Architect) to house 15 mtr.x2 nos. hoses. The hose box size is 750 mm x 600 mm x 300 mm Make-Newage/Minimax/Fireshield/Safex

Supplying & fixing first aid fire hose reel of thermoplast braided suitably reinforced 20 mm size & 30 m standard length with 5 mm tapering branch nozzle, 25mm dia. Pipe to connect to riser with cut off ball valve attachment. Hose to be swinging type wall mounted drum & recessing into hose cabinet to suit location including fixing with lead anchor fasteners & bolts (Including drum and swivel arrangement) etc complete.Make-Newage/Minimax/Fireshield/Safex

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Providing and fixing Stainless Steel standard branch pipe dia 63 mm inlet with nozzle 20 mm dia outlet conforming to IS : 903, suitable for instantaneous connections to hose coupling etc. as required.Make-Newage/Minimax/Fireshield/Safex

EXTERNAL HYDRANT SYSTEM-:Excavations for pipelines in trench and pit in open areas where disposal or surplus earth is done along the alignment, including trimming and dressing sides, leveling of beds of trenches to correct grades, cutting joint holes, refilling consolidation and dewatering of refilling in 15 cm layers & restoration & unmettalled or unpaved surface to it's original condition. The rate including the cost of necessary timbering dewatering of drain water, diversion of traffic, night signals, fixing caution boars, watching fencing etc.Upto 1.5m depth in all classes of soil

Supplying, installation testing and commissioning of the following-: ‘C’ class MS Pipe as per IS1239 for underground/over ground pipes with welded / flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the client and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overheads pipes and providing and fixing pyp kote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm) etc.Make-Tata/Jindal/Sail.Complete as per ASTM standards/IS: 10221 for corrosion protection of pipes for the underground installation.Note: The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest applicable codes & standard before applying paint or pipe coating or wrapping etc. complete. size 150 mm

80 mm dia.

Providing and fixing hydrant stand posts of 80 mm dia. With flanges and accessories and supply, fixing 63 mm dia SS Single headed Hydrant Valve in the courtyard IS:5290 Including 2 coats of approved enamel paint (red) over a coat of primer, complete with 2.1/2” ‘Morris’ pattern instaneous couplings, etc. complete.Make-Newage/Minimax/Fireshield/Safex

Providing & fixing 63mm dia CP hose pipe as per IS 8423 TYPE A TAC/ LFA approved of 15 mtr. standard length of approved pattern and size including SS male and female Coupling duly bound with copper wire etc. complete.Make-Newage/Minimax/Fireshield/Safex

Providing and fixing TAC approved fire hose cabinet to house fire hydrant & hose, including all other related accerrories fabricated from M.S. sheet (16 Gauge) of fully welded construction having front door with locking arrangement, partially glazed with 4 mm thick glass. Cabinet shall be powder coated & painted with post office red colour of size as mentioned in drawing (or as approved by the Architect) to house 15 mtr.x2 nos. hoses. The hose box size is 750 mm x 600 mm x 300 mm . Make-Newage/Minimax/Fireshield/Safex

Supplying and fixing 4 way Fire Brigade service inlet of size 150 mm dia. with 4 No. 63mm (2.1/2") size Stainless Steel male outlets ( Stainless Steel male coupling) including metallic cover of mild steel and glass front, indicator plates,150mm BFV, 150 mm

NRV etc. complete.Make-Newage/Minimax/Fireshield/Safex

Supply and installation, testing and commissioning of Isolation Sluice valves tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open and shut position to be installed underground in valve chamber as per fire practice etc complete.Make-Leader/Audco/Zoloto.150 mm dia

Providing and fixing Stainless Steel standard branch pipe dia 63 mm inlet with nozzle 20 mm dia outlet conforming to IS : 903, suitable for instantaneous connections to hose coupling etc. as required:Make-Newage/Minimax/Fireshield/Safex

Supply,Installation,Testing & Commissioning of Air vessel made of 250mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint as required.

TERRACE PIPING & ACCESSORIES -: Supply and installation, testing and commissioning of CI Butterfly valves ( heavy ) conforming to BS 5155 ,PN1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position as per fire practice etc complete..Make-Zoloto/Audco/Leader.100 mm dia

SITC of NRV conforming to IS 5312 (swing type) or to API 594/598 (dual plate check type) with CI body & brass trim part, PN 1.0 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked and approved make.Make-Zoloto/Audco/Leader. Size : 100 mm dia

Supply and fixing of 100 mm dial Pressure gauge with Syphon tubing & isolation valvePressure Guage: 0-7 kg/sq.cm.Make-H Guru/G Guru.

Supply & fixing of Terrace tank (5000 ltr) Fiber Water tank triple layer unbrakable extra thick and flexible material for long life new UV threaded lid to keep dust particles out with all needed accessories. (Make: Sintex/Plasto )

Main Structure Supply ,fabrication & fixing of structural steel items made out of channels,angles,flats,plates,chequred plates | section,beam,hollow section any type of frame,space frame,gates,attrium in top,truss,purlins,columns,beams etc. complete as per drawing including priming nwith one coat of red oxide primer in all floors as per direction of the Engineer-in-charge.

Supplying, installation testing and commissioning of ‘C’ class MS Pipe as per IS:1239 for overhead pipes with flanges welded and with heavy clamps ,hangers, brackets or pipe supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, MS specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work shall be to the satisfaction of the Architect and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overhead pipes .Make-Tata/Jindal/Sail. Size-100 dia

FIRE PUMPS & RELATED ACCESSORIES :- Supplying & installing completely testing & commissioning of End Suction Back Pull Out pump set having pump speed of 2900 rpm, Pump Efficiency not less than 65%, with CI Casing, Bronze Impeller, SS 410 Shaft & Shaft Sleeve Connected through Flexible Coupling with a TEFC Sq. Cage Induction Motor mounted on a common base frame fabricated in MS Channel. Packing has to be of Mechanical seal. It has to be inclussive of all the pump accessories. The pump shall be capable of giving not less than 150% discharge at a head not less than 65% of the rated head. Motor to be of continuous rating Motor to be suitable for 415V, 50Hz, AC supply of 45 KW rating for the above pumps. Motor shall accept +/- 10% variation in voltage and +/- 3% variation in frequency. It has to be of IE2 efficiency class. etc. complete.Make-Kirloskar/WILO/KSB.Pump - Motor : Discharge : 2280 LPM, Head-70mtr.

Supplying, installing, testing and commissioning of End Suction Back Pull Out pump set having pump speed of 2900 rpm, Pump Efficiency not less than 25%, with CI Casing, Bronze Impeller, SS 410 Shaft & Shaft Sleeve Connected through Flexible Coupling with a TEFC Sq. Cage Induction Motor mounted on a common base frame fabricated in MS Channel.Motor to be suitable for 415V, 50Hz, AC supply of 11 KW rating for the above pumps. Motor shall accept +/- 10% variation in voltage and +/- 3% variation in frequency. It has to be of IE2 efficiency class. Packing has to be of Mechanical seal. It has tio be inclusive of all the pump accessories complete . The scope shall also include necessary coupling, coupling guard, base frame, foundation bolts, RCC foundation, etc. complete .Make-Kirloskar/WILO/KSB.Pump - Motor: Discharge: 180 LPM, Head: 70mtr.

MCC for Fire Pumps : S/I/T&Commissioning of LT indoor floor mounted cubical type electrical panel for fire fighting pumps made out by 2mm CRCA steel sheet duly derusted & painted by Red out & inside gray powder cote paint is designed as G.A drawing. (FOR FIRE FIGHTING) as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & complete test certificate must be submitted along with panel

Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.

Supplying and laying 25 mm X 5 mm G.l strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.l. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.l. nut bolt & spring washer spaced at 50mm)

Supply, laying testing and commissioning of L.T. Al. XLPE armoured cable confirming to IS : 7098 Part - II as per the description given below: (Note: Qty may vary +/- 15% as per actual work at site) Make-Havels/Polycab/Kei/Finolex/RR Kabel/Gloster.3.5 C x 120 sq.mm

Supply, laying testing and commissioning of L.T. Al. XLPE armoured cable confirming to IS : 7098 Part - II as per the description given below: (Note: Qty may vary +/- 15% as per actual work at site) Make-Havels/Polycab/Kei/Finolex/RR Kabel/Gloster3.5 C x 50 Sqmm.

Supply, laying testing and commissioning of L.T. Cu. XLPE armoured cable confirming to IS : 7098 Part - II as per the description given below: (Note: Qty may vary +/- 15% as per actual work at site) Make-Havels/Polycab/Kei/Finolex/RR Kabel/Gloster.12 C x 2.5 Sqmm.

Supply, fixing, connection, testing and commissioning of double compression brass cable glands and crimping type lugs / sockets with necessary tools and equipments as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned above. The job also includes, if necessary, supply and fixing of extension busbar of same material on circuit breaker / FSU or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh. 3.5C x 120sq.mm

3.5 C x 50 Sqmm.

12 C x 2.5 Sqmm.

Supplying, installation testing and commissioning of the following‘C’ class MS Pipe as per IS:1239 for over ground pipes with flanged/ welded and with heavy clamps, hangers, brackets or pipe supports (all with flanged/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, MS specials like sockets, union nuts, elbows, reducers, plugs, Tees, bends, etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches

on walls, ceilings, into brick walls or RCC with lead anchor fastners. The work includes excavation in all types of soils and back filling and making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the Architect and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overheads pipes.Make-Tata/Jindal/Sail.Note: The piping installation has to be put to hydraulic test to1.5 times the working pressure (for minimum 2 hrs.) before applying paint or pipe coating and wrapping etc. Complete 200mm ( 6 mm thk IS 3589)

Providing, installing and commissioning C.I. flanged "Y" type Strainer with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete..Make-Zoloto/Audco/Leader.150 mm

Supply and installation, testing and commissioning of double flanged Isolation Sluice valves conforming to IS 14846 tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position.Make-Zoloto/Audco/Leader Size : 200 mm (GEAR OPERATED)

Size : 150 mm

Size : 80 mm

Supply and installation, testing and commissioning of CI Butterfly valves ( heavy ) conforming to BS 5155 ,PN1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position as per fire practice etc complete..Make-Zoloto/Audco/Leader Size : 150 mm

Size : 50 mm

NRV conforming to IS 5312 (swing type) or to API 594/598 (dual plate check type) with CI body & brass trim part, PN 1.6 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked .Make-Zoloto/Audco/Leader Size : 150 mm

Supply, installation testing and commissioning pressure switch assembly with interlocking of pumps .Make-Indfos/Grandfos.

100 mm dial Pressure gauge with Syphon tubing, isolation valve & mounting accessories complete Range: 0 - 10 kg/sq.cm.Pressure Gauge: 0- 10 kg/sq.cm.Make-H GURU/G GURU.

Supply, installation, testing & commissioning of Rubber bellows on discharge side of pump conforming to EJMA with all hardwares, companion flanges & gaskets, etc. Size : 150 mm

Supplying, installing, testing and commissioning of 150 mm hydralically operated Sprinkler control valve complete with water motor gong bell, basic trims as required, pressure gauges, pressure switch, drain valves, ball valves etc. complete. Alarm valve shall be UL Listed / FM approved.Make-Newage/HD/Honeywell

SITC of Ball valve of 15 mm dia.Make-Zoloto/Audco/Leader

SITC of Ball valve of 25 mm diaMake-Zoloto/Audco/Leader

32 mm dia

40 mm dia

50 mm dia

65 mm dia

40 mm dia

80 mm dia

100 mm dia

Supply,Providing & fixing Butterfly valve conforming to IS-13095, PN 1.6 (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required. Size-100 mm dia Make-Zoloto/Leader/Audco

65 mm dia

Supply,Installation, Testing & Commissioning of sprinkler-:Pendent/upright/sidewall sprinkler. Make-Tyco/HD/Viaking

Providing, laying, testing & commissioning of Flexible Sprinkler Hose Corrugated Unbraided type of length 1mtr for Fire Sprinklers, with 1'' Inlet Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Brackets(UL Listed) with all complete accessories as per direction of Engineer-in-charge. Make-Tyco/HD/Viaking

Supplying, installing, testing and commissioning of sight glass unit with required size orifice plate, test valve and complete accessories like tees,elbows flanges etc.as per the tender drawing .Butter fly valve for Drain (50 mm)

Drain Pipe of 50 mm dia.

Supply & installation of approved make flow switch on sprinkler header on each floor, operating at 24-V with all accessories & hardwares.Make-Honeywell.

SIGNAGES: SITC of Flexyle Photoluminescent based Glow-in-the-dark sheeting with luminious properties enclosed in a weather-proof UV stabilized film with UV screen printing by imported inks pasted over 3 mm Thick Cast Acrylic Sheet with the Protection of 3 mm Thick Cast Acrylic from Front side with stud type mirror screw for floor indication, fire exit, hydrant, hose reel, fire extinguisher, MCP, fire alarm panel, in case of fire, lift, alarm valve signages, FIRE EVACUATION PLAN

Supplying, installing, testing and commissioning of adressable multi sense smoke detector with inbuilt isolator module/isolator base,base, junction box and other accessories.Make-Honeywell(MAX) /Siemens/Bosch/Edward/NOTIFIER/GST/Schneider

Supplying, installing, testing and commissioning of Addressable Manual Call Point with inbuilt monitor module and back box.Make-Honeywell(MAX) /Siemens/Bosch/Edward/NOTIFIER/GST/Schneider

Supplying, installing, testing and commissioning of addressable Hooter at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication with all accessories etc., complete. Make-Honeywell(MAX) /Siemens/Bosch/Edward/NOTIFIER/GST/Schneider

Supplying, installing, testing and commissioning of 2C x 1.5 sq. mm

EMERGENCY EVACUATION SYSTEM/PUBLIC ADDRESS SYSTEM-Supplying, installing, testing and commissioning of 12 Watt wall mounted speakers with built in line matching transformer, grill flush mounting type in side the utility rooms.Make-Bosch/Bose/Honeywell.

Supplying, installing, testing and commissioning 8 zone voice alarm controller with USB mp3 am/fm player included 8 zone button paging station and microphone.Make-Honeywell/Bose/Bosch.

Supplying, installing, testing and commissioning of Power amplifier of 480 watt.The amplifier should be clean reliable audio for public address amplification.Line input less than 1 volt, unbalanced& line output less than 1 volt unbalanced.Make-Honeywell/Bose/Bosch.

Supplying, installing, testing and commissioning of 12 U Rack for amplifier, Controller & Microphone. Make-Valrack/Legrand/Netrack

Supplying, installing, testing and commissioning approved make PVC FRLS conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.Make-AKG/Precision.25 mm dia.