GE(W)/HSR-51/2022-23 PROVN OF WATER SUPPLY AT DIV TRAINING AREA (BHOJRAJ) AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Supply and fixing Steel water tubes, medium grade, ISI marked, galvanised, 80 mm bore with all fittings, Tee, Socket, Union, flange and Socket etc laid in trenches/ under road/floor complete all as specified and directed.

Supply and fixing Steel water tubes, medium grade, ISI marked, galvanised, 50 mm bore with all fittings, Tee, Socket, Union, flange and Socket etc laid in trenches/ under road/floor complete all as specified and directed.

Supply & Fixing Cast Iron foot Valve with conical Strainer Suitable for 80 mm dia CI/GI pipe suction pipe of clear water pump including all necssary arrangement & T&P required for fixing the strainer Such as Dewatering to required level,Welding work,flanges ,Nut & bolts etc complete all as specified & directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cable, pipes etc and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.

S&F Non-return valves cast iron body, ISI marked, heavy duty both ends flanged suitable for 80 mm bore pipe complete all as specified and directed.

Supplying and fixing C.I. Double Air Valve Double Orifice with Rubber Ball 80 mm dia with end flanged, ISI Marked complete all as specified and directed.

Supply and fix Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 50 mm bore complete all as specified and directed.

Supply and fixing Sluice valves class P N 1.6 cast iron body with forged steel spindle, non rising type, with cast iron wheel head, both end flanged, ISI marked, 80 mm bore including neoprene rubber gasket, nuts, bolts, washers, etc complete all as specified and directed.

M&L construction of brick masonry valve pit of size 1000 mm X 1000mm X 1000 mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 X 40 X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCC foundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete all as specified and directed.

Supply, installing,testing and commissioning of Pumping sets, centrifugal,with electric driven Induction Motor Squirrel cage of capacity 12.5 HP, 3 phase, 415V,Head 40 to 45 metre, Discharge 270-300 LPM and of suitable rpm , including necessary PCC foundation as recommended by OEM with antivibration Pad as required on site complete all as specified and directed.

Supply, install commissioning and testing LT panel board (indoor type) cubical type made out of CRCA sheet 2.00 mm thick dust and vermin proof and angle iron of size 35 x 35 x4 mm, pedestal frame grouted in PCC (1:2:4) type B-1 20mm graded stone aggregated thimble and cable entry boxes with cable glands. Panel should be covered from all sides with front and back lockable door and hinges complete with copper busbar of capacity 200 Amps, TPN, three phase, 04 wire (In separate chamber) including painting with two coats synthetic enamelled paint over a coat of red oxide primer and consisting of the following :-( LT panel for P/H bldg ) Incoming :- (a) MCCB 4 Pole 63 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) - 01 No. Outgoing :- (b) MCCB 4 Pole 32 amps ,415 Volt of breaking capacity not less than 16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) - 02 Nos (c) Single phase preventor -02 Nos (d) On load Change over switch 4 pole of current raring 63 A (open execution type) - 01 No (e) MCB SPN 10 Amp C curve, 10 KA capacity - 01 No (e) MCB SPN 10 Amp C curve, 10 KA capacity - 01 No (f) Automatic Star-delta starter 12.5 HP - 02 Nos (g) Indicator lamp (R,Y,B) (h) Digital Ammeter 0-100A with suitable ratio of CTs – 03 No. (j) Digital Volt meter 0-500 Volts – 01 No

Material and labour for earthing complete with galvanized steel earth plate electrode size 600x600x6.3 mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized iron strip 32 x 6 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 40 mm dia connected to main earth lead on pole or control board and GI pipe light grade 20 mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

S K BUILDERS

virendra constructions