Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | Progressive Builders L1₹26.2 LAccepted-AOC | L1 | Accepted-AOC Found lowest and reasonable | |
| 2 | L2₹31.0 L+₹3.4 L (12.5%)Rejected-Finance 114 SHASTRI NAGAR MEERUT | MEERUT | UTTAR PRADESH | 245206 | L2 | Rejected-Finance In order but L2 | |
| 3 | L3₹34.2 L+₹6.7 L (24.1%)Rejected-Finance | L3 | Rejected-Finance In order but L3 | |
| 4 | L4₹37.9 L+₹10.4 L (37.6%)Rejected-Finance | L4 | Rejected-Finance In order but L4 | |
| 5 | L5₹49.2 L+₹21.7 L (78.7%)Rejected-Finance | L5 | Rejected-Finance In order but L5 |
Tender Value
Refer Docs
EMD Value
₹96,600
Closing Date
29 Jun 2023, 6:00 pmClosed
GE(U) E/M Meerut
Roorkee road Meerut Cantt
REPAIR/ MAINT OF OLD GI/CI PIPE WITH PPR INCLUDING REPLACEMENT OF OLD, AUTOMATION AT PUIMP HOUSES OF AGE E/M (WS) UNDER GE (U) MEERUT CANTT.
2023_MES_600059_1
8517/E8
Open Tender
Civil Works - Water Works
Item Rate
180 days
Meerut
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE(U) E/M Meerut
₹96,600
Yes
27 Jul 2023
1 Jun 2023
1 Jul 2023
1 Jun 2023
29 Jun 2023
15 Jun 2023
Amount
Excavation in trenches in soft/lose soil n.exc. 1.5M wide & n exc 1.5M deep for laying of GI/CI pipe line & getting out including forming bottom surface all as specified and directed.
All as per item No. 1 above but in Hard/dense soil including cutting of roads/PCC floors etc complete all as specified and directed.
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm in Soft/Loose of soil after the pipe laid & tested complete all as specified and directed.
Removing excavated surplus soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 m above the starting point all as specified and directed.
Disconnecting and Taking out old existing CI pipe including all fitting with spigot and socket ends and lead jointed any description / grade and in any position of trenches / under floors/ on wall etc all as directed and specified for the following sizes :-
150mm dia
100mm dia
80mm dia
Disconnecting and Taking out old existing cement pipe and connecting of any description / grade and any position of trenches including connecting fitting / accessoriese and fixtures. all as directed and specified for the following size of pipe :-
150mm dia
100mm dia bore
Disconnecting and Taking out old existing GI pipe and connecting of any description / grade and any position of trenches / under floors/ on walls etc including connecting fitting / accessoriese and fixtures such as bend, union, elbow socket etc. all as directed and specified for the following size of pipe :-
150mm dia bore
100mm dia bore
80mm dia bore
50mm dia bore
40mm dia bore
25mm dia bore
20mm dia bore
15mm dia bore
M & L DI/CI Specials class B as per IS such as bends, tappers,any type branches cross all sockets and spigot collar caps, ' D' joints and plug up to 250mm bore all as specified and as directed
Taking down old existing sluice valve and S & F sluice valve PN-1.6 with stainless steel spindle conforming to IS-14846-2000 doubles flange and including new flanged rubber joints complete suitable for following sizes including necessary nuts, bolts with washer and rubber gasket of following sizes :-
150mm dia bore
100mm dia bore
80mm dia bore
M & L PPR gate valve with iron wheel head for PPR pipe including tasting of following :- Make SFMC Pvt Ltd, Vectus Industries Ltd
63mm dia bore
32mm dia bore
25mm dia bore
20mm dia bore
Supply and fixing Bib taps 15 mm dia, PTMT any colour, high pressure screwed for iron pipes and fixed to pipe (minimum weight not less than 90 gms) fixed in repair complete all as specified & directed.
Cutting of existing CI Pipes and reducing to required length before laying in position for insertion of new tees, branches etc complete all as specified & directed. For following size :- Note :- Fittings will be measured and paid for separately under respective item
150mm dia bore
100mm dia bore
80mm dia bore
Making bore holes in GI pipe incl cutting of pipe where reqd for making any branch connection, repairing branch connection pipe including providing and fixing of suitable clamps of required size etc. complete for following sizes:-
50mm dia bore
40mm dia bore
25mm dia bore
20mm dia bore
M &L Stainless steel spindle for any make and type of sluice valve fixed in repair all as specified and directed, for following sizes of sluice valves:-
250mm dia bore
200mm dia bore
150mm dia bore
100mm dia bore
80mm dia bore
S & F Gun metal/stainless steel nut for any make/type of sluice valve spindle fixed in repair all as specified and directed. For following sizes of sluice valves with pressure ratting upto 25 Kg/cm2 :-
250 mm bore
200mm dia bore
150mm dia bore
100mm dia bore
80mm dia bore
S & F in replacement including testing and commissioning of PPRC pipe PN 16 Mpa/SDR 7.4 / SS 3 layer including fitting like elbow, union, flange, Tee and bend etc complete of following sizes all as specified and directed by Engr-in-charge.
160mm dia bore
110mm dia bore
90mm dia bore
63mm dia bore
32mm dia bore
25mm dia bore
20mm dia bore
Refixing only GI tubing, medium grade, including new threading old serviceable GI pipe with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed, for the following size:-
50mm dia bore
40mm dia bore
25mm dia bore
20mm dia bore
15 mm dia bore
Construction of brick was only valve pit of size 1 Mtr X 1 Mrt X 1 Mrt (Internal dimensions ) including all excavation and earth work in any type of soil and disposal of soil to a distance of not exciting 50mtr and depositing all as directed including 10mm plastering internally in CM 1.4 PCC 1:2:4 100mm thick at bottom and top of valve pit, and MS Sheet 3mm thick at with angle iron frame 35X35X5mm and 40X40X5mm at bottom for minting and MS sheet cover inlet. Handle locking arrangement with 1 No. lock with two keys NAVTAL/GOODREJ/HARRISION ON 50mm inlc two coats of synthetic enamel paint (Make Asian Ist quality ) over a coal of red oxide primer on steel surface complete all as shown on drg Bo. TIVEM/12 sheet 1/1 and as specified
All as per time No. 18 above but of size 1.2Mtr X 1.2Mtr X 1.2Mtr
M & L cement concrete type B-1 1:2:4 (20mm grade stone aggregate) as in door cills, path and plinth protection (of any section)including chambers, weatherings, throat-ing etc and setting in mortar complete all as specified and directed.
S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 150mm nominal bore CI/DI pipe complete all as specified and directed.
S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for100mm nominal bore CI/DI pipe complete all as specified.
S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 80mm nominal bore CI/DI pipe complete all as specified and directed.
S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 50mm nominal bore CI/DI pipe complete all as specified and directed.
S & F of galvanized fitting like TEE, Elbow, Socket, Union, Reducer, Nipple of suitable for existing GI tubing of size up to 150mm for preventing leakage if any of make new branch connection complete all as specified and directed.
M&L for directional boring for 180mm dia and up to 1.5m depth with hydraulic machine under any surface ( Hard/Deuse/ RCC/ Coal tar Road) for laying of pipeline including trenching if required . Cost of horizontal Bore Machine (hydraulic) & all allied itemes required for boring is deemed to be included in qnoted Rates complete all as specified and directed.
MS work as in clamps, made to shape of flat iron of suitable size incl nuts, bolts, washers of appropriate size and painting with synthetic enamel paint in two coats over one coat of redoxide zinc chrome primer complete all as specified and directed. Note:- Cost of fixing clamps in walls/ RCC by cutting and grouting in PCC is deemed to include in the rate quoted by tenderer.
Supply, installation, testing & Commissioning of phase sequence corrector micro processor based with Fault Detection circuit (FDC) & Spike/Surge protection suitable for upto 50 H.P load consisting of following features all enclosed in factory made MS powder coated box of 1.5 sqmm with following features:- A, Two Contactor 3 phase of load capacity of 30Hp B, Input/output connector strip C, Rotary Switch for Auto/Manual operation D, Under/over voltage protection module micro processor based . E, Microprocessor based circuit with In built Spike protector circuit module . F, Micro processor based time delay Automatic Phase change over circuit Module. G, Visual indication high intensity type for normal & reverse Phase h, M.S Powder coated Box of 1.5 Sqmm of suitable size Wall Mounting Type i, with Vsatsatellite controlled transmitter modem (Non GSM/NON GPRS,NON INTERNET,NON RF,NON RTU based data Transmission) to transmit failure and tripping data of phase Sequence corrector such as over voltage trip, under voltage trip single phasing trip,Phase sequence correct failure trip to 4 mobile nos with Vsat micro chip antenna k) With R,Y,B Input And Output indicating indicator Led based
Supplying & Fixing on wall / laying in ground 25 mm (Amp 80 Amp) PVC insulated PVC Copper cable complete all As Specified and directed by Engineer-in-charge. Make:Larsen/Grindlay/Delton/giloster/kalinga/para mount/polycab
Supplying & Fixing of copper thimble of size 25 mm
Supply,installation,commissioning and testing of Micro processor Controlled Master Monitoring &operating panel via Ultra Sonic non contact sensors for boring pump set for Automatic pump controlling of pump set and with following features:- a) Main Micro Processor Controller Data Receiver/Transmitter unit Modem Vsat satellite based Non GSM/Non GPRS/Non RF/Non RTU Based b) Single/Reverse phasing protection & alarming through SMS to five mobile no’s c) Micro controller based complete monitoring system for pump motor three phase Voltage d) current, P.F & KWH with remote monitoring through inter net satellite based and through mobile phone e) With SCADA Soft Ware For Mobile Phone for monitoring the water level in mimic format ,via mobile phone app Non Internet based but ringer tone based f) The micro controller shall send SMS Alert to five mobile no’s in case of any tampering with the automatic pump controllers or the system g) The micro controller shall send SMS Alert to five mobile no’s in case of single phasing, unbalance voltage/Current or any failure with the pump operation system of pump set h) With Mimicgraphic display of Size 12” /12” High Intensity Type LED Micro processor based for water level of 1 no oht and pump set ON/OFF Running Mimic with deliver line running mimic K) With Dry run protection Make :- Unison Engg Enterprises/megha automation/Simplex Control and Equipment
Supply,installation,commissioning and testing of Micro processor Controlled Master Monitoring &operating panel for automatic controlling of 1 nos delivery line motorize valve as per pre set timing to operate the Delivery valve automatically with inverter back up of 500 VA in case of power failure& act as a usercontrolled with Visual annunciation panel,& with Cordless Transmitter/receiverunit modem satellite based supper imposed on GSM Net work for SCADA Remote monitoring & operation of complete water supply operation satellite based super imposed on GSM net work. The Panel shall be wall/Floor mounting Shall be of suitable size made of 1.5 sqmm CRCA sheet Properly powder coated ,consisting of following features a) Main Micro Processor Controller Data Receiver/Transmitter unit Modem satellite basedSupper imposed on GSM net work b) With automatic controlling of delivery line motorize valve via pre set timer. c) With SCADA Soft Ware For Mobile Phone for manually controlling of delivery line motorize valve in case of emergency of OHT via mobile phone app non intr net but ringer tone based. Make :- Unison Engg Enterprises/megha automation/Simplex Control and Equipment
Supply ,installation, testing & Commissioning of high torque motorize valve with gears and adopters self Lubricating Type, Weather proof with protection against , over voltage Jamming of valve and over current protection with manual by-pass arrangement to open/Close the valve on power failure (a) Valve Size:- 150 MM (b) Designed line pressure 4 kg/sq cm (c) Operating angle; - 90 degree (d) Disc Material :- CI with nylon coating (e) Valve type :-Ball valve with geared motor on top (f) With Scadaout put pot (g) With anti theft device micro controller based Make;-Unison,RC, Belimo,EscorpUk, Simplex Control and Equipment
Supply ,installation, testing & Commissioning of Ultra sonic non contact sensor for level monitoring for over head tank with Following specification: - Principal:- Ultra sonic sound waves water level sensing O/P Pot :- 4-20 ma/0-20 V, Data transmitting out put pot SCADA Operation out put pot Range 6 mts Make:- Unison/Crystal/Banner/Simplex Control and Equipment
Supply, installation, testing & commissioning ofwireless receiver unit with RS 232,RS 484 & USB input port with SCADA operating soft waresatellite Controlled and Non inter net ,Non computer ,Non RF/FM based and Non GSM based transmit ion to monitor water level of 6 no oht in flash format. Make :- Unison Engg Enterprises/megha automation/ Simplex Control and Equipment
Supply, installation, testing & commissioning of32 “ LED screen with RS 232,RS 484 & USB input port with SCADA operating soft waresatellite Controlled and Non inter net ,Non computer ,Non RF/FM based and Non GSM based transmit ion to monitor water level of 6 no in flash format. Make :- Unison Engg Enterprises/megha automation/Simplex Control and Equipment
Supplying & Fixing on wall / laying in ground 4 X 1.5 Sqmm PVC insulated & PVC Copperarmored cable with heavy duty PVC Saddles 60 cm apart complete all As Specified and directed by Engineer-in-charge.
Supplying & Fixing on wall / laying in ground 6 X 1.5 Sqmm PVC insulated & PVC Copperarmored cable with heavy duty PVC Saddles 60 cm apart complete all As Specified and directed by Engineer-in-charge.
Jain Traders
NITHYA INFRATECH
BHAGWAN DAS & Co
unison engg enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .