Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹80.2 L
EMD Value
₹1.9 L
Closing Date
6 May 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
ALTAF AHMED
Construction and development of MRF Sheds in Gundlupet TMC, Yelandur TP and Hanur TP of Chamarajanagar District.
DMA/2024-25/OW/WORK_INDENT21193/CALL-3
DMA/2024-25/OW/WORK_INDENT21193/CALL-3
Open
Other Works
Two Tender Document System(Two Cover)
DMA District Urban Development Cell Chamarajanagara
10 documents required · 7 mandatory · 3 optional
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Satisfactoriy completed as prime contractor at-least one such similar work of value not less than Rs. 48.25 (50% of estimated cost of tender)
The bidder in the block period of 2020-21 to 2024-25 should have executed in any one year the following minimum quantities of prime items:PCC/RCC 178.50Cum, Structural steel/truss work:18.98 tons,Earthwork: 425.75cum, Galvanized iron sheet:1029.00Sqm
Unconditional Line of Credit Certificate for an Amount of 29.00 Lakhs
Minimum financial turnover (in civil engineering construction works) not less than two times the annual payments from this contract not less than Rs. 193.00 Lakhs
KPWD Registration Certificate
GST registration certificate
ITRs of last 3 financial years
List of ongoing contracts or existing commitments
certified calculated bid capacity sheet
List of Works for which tenders have been submitted
₹2,010
₹1.9 L
9 Apr 2025
9 Apr 2025
7 May 2025
3 May 2025
Construction and development of MRF Sheds in Hanur TP of Chamarajanagar District.
Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting rank vegetation grass bushes shrubs saplings and trees girth up to 300 mm removal of stumps of trees cut earlier and...
Earth work excavation for foundation of structure upto 3 mtrs By mechanicle means as per drawing and technical specification including setting out providing shoring strutting and bracing removal of st...
Earth work excavation for foundation of structure upto 3 mtrs By mechanicle means as per drawing and technical specification including setting out providing shoring strutting and bracing removal of st...
Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 16 1 cement 6 coaSDe sand CM SR 202324PNo9Vol254 ---- as per the directions of the Engineer-in-charge
Providing and laying in position Reinforced cement concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works & other parallel works from 050m to 350 m hei...
Providing and laying in Reinforced cement concrete for all Basement & surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine...
Providing and laying in position Reinforced cement concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 350 m height The granit...
Providing and laying in position Reinforced cement concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 350 m height The granit...
Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking lapingwelding joints tying with bindin...
Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material ...
Providing and constructing unreinforced plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per Clause 150122 M30 Grade coarse and...
Providing and fixing Steel work in built up tubular round square or rectangular hollow tubes etc trusses etc including cutting hoisting fixing in position and applying a priming coat of approved steel...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgm3 and minimum compressive strength of 400 Nmm2 conforming to IS 2185...
Providing 18mm cement plaster in two coats under layer 12mm thick cement plaster with cement mortar 15 1 cement 5 coarse sand finished with atuoplayer 6mm thick cement plaster with cement mortar 16 1 ...
Finishing walls with Acrylic Smooth exterior paint of required shade New work Two coat applied @ 167L10 m² over and including priming coat of exterior primer applied @ 220 kg10 m² with paint of appr...
Providing & fixing corrugated GS sheet roofing including vertical curved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diameter with bitumen and GI limpet washers or with GI limpe...
Electrical Works Lumpsum ---- as per the directions of the Engineer-in-charge
Construction and development of MRF Sheds in Yelandur TP of Chamarajanagar District.
Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting rank vegetation grass bushes shrubs saplings and trees girth up to 300 mm removal of stumps of trees cut earlier and...
Earth work excavation for foundation of structure upto 3 mtrs By mechanicle means as per drawing and technical specification including setting out providing shoring strutting and bracing removal of st...
Earth work excavation for foundation of structure upto 3 mtrs By mechanicle means as per drawing and technical specification including setting out providing shoring strutting and bracing removal of st...
Providing and laying in position plain cement concrete for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 16 1 cement 6 coaSDe sand CM SR 202324PNo9Vol254 ---- as per the directions of the Engineer-in-charge
Providing and laying in position Reinforced cement concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works & other parallel works from 050m to 350 m hei...
Providing and laying in Reinforced cement concrete for all Basement & surface level works return walls retaining walls sunken floors etc The granitetrapbasalt crushed graded coarse aggregates and fine...
Providing and laying in position Reinforced cement concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 350 m height The granit...
Providing and laying in position Reinforced cement concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 350 m height The granit...
Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking lapingwelding joints tying with bindin...
Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material ...
Providing and constructing unreinforced plain cement concrete pavement thickness as per design over a prepared sub base with 43 grade cement or any other type as per Clause 150122 M30 Grade coarse and...
Providing and fixing Steel work in built up tubular round square or rectangular hollow tubes etc trusses etc including cutting hoisting fixing in position and applying a priming coat of approved steel...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgm3 and minimum compressive strength of 400 Nmm2 conforming to IS 2185...
Providing 18mm cement plaster in two coats under layer 12mm thick cement plaster with cement mortar 15 1 cement 5 coarse sand finished with atuoplayer 6mm thick cement plaster with cement mortar 16 1 ...
Finishing walls with Acrylic Smooth exterior paint of required shade New work Two coat applied @ 167L10 m² over and including priming coat of exterior primer applied @ 220 kg10 m² with paint of appr...
Providing & fixing corrugated GS sheet roofing including vertical curved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diameter with bitumen and GI limpet washers or with GI limpe...
Electrical Works Lumpsum ---- as per the directions of the Engineer-in-charge
Construction and development of MRF Sheds in Gundlupet TMC of Chamarajanagar District.
KSRB 1-1.14.1: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricad...
KSRB 2-2.1.2: Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as p...
KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
KSRB 2-2.2.3.1 :Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coar...
KSRB 2.11 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking...
KSRB 5-5.4: Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR) ---- as per the directions ...
KSRB 1-1.8: Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site...
KSRB 6-6.33: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conf...
KSRB 8-8.3.1: Providing 15mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffo...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...
KSRB 8-8.51 : Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth comp...
KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...
KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...
KSRB 11-11.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, ...
KSRB 11-11.8.4:Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifica...
KSRB 11-11.35.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approv...
Electrical Works MRF Sheds in for Gundlupet TMC
LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system.Completely made by CRCA fabricated, powder coated paint finished fr...
LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system.Completely made by CRCA fabricated, powder coated paint finished fr...
LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...
LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...
LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...
LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...
LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...
LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...
LT Cables, Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14...
Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.3.5Cx50 Sqmm Al Ar cable ---- as per the directions of the Engineer-in-charge
Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.4Cx25 Sqmm Al Ar cable ---- as per the directions of the Engineer-in-charge
Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.4Cx16 Sqmm Al Ar cable ---- as per the directions of the Engineer-in-charge
Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.4Cx10 Sqmm Cu Ar cable ---- as per the directions of the Engineer-in-charge
Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.4Cx6.0 Sqmm Cu Ar cable ---- as per the directions of the Engineer-in-charge
Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.3Cx6.0 Sqmm Cu Un Ar cable ---- as per the directions of the Engineer-in-charge
Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.3Cx4.0 Sqmm Cu Un Ar cable ---- as per the directions of the Engineer-in-charge
Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.70 Sqmm Al Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge
Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.25 Sqmm Al Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge
Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.16 Sqmm Al Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge
Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.10 Sqmm Cu Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge
Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.6.0 Sqmm Cu Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge
Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.6.0 Sqmm Cu Un Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge
Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.4.0 Sqmm Cu Un Ar cable (tinned copper lug) ---- as per the directions of the Engineer-in-charge
PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...
PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...
3PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wa...
PVC conduits & Accessories, Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wal...
Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...
Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...
Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...
Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...
Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...
Point wiring using Copper wire with switch, Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for p...
Circuit main wiring, Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit.1.0 Sqmm Cu...
Circuit main wiring, Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit.1.5 Sqmm Cu...
Circuit main wiring, Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit.2.5 Sqmm Cu...
Circuit main wiring, Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit.4.0 Sqmm Cu...
Circuit main wiring, Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit.6.0 Sqmm Cu...
Switches & sockets outlets in Existing modular box, 6A one way switch ---- as per the directions of the Engineer-in-charge
Switches & sockets outlets in Existing modular box,6A Two way switch ---- as per the directions of the Engineer-in-charge
Switches & sockets outlets in Existing modular box,6A 5Pin socket ---- as per the directions of the Engineer-in-charge
Switches & sockets outlets in Existing modular box,Stepped fan regulator ---- as per the directions of the Engineer-in-charge
Switches & sockets outlets in Existing modular box,6/16A Universal socket ---- as per the directions of the Engineer-in-charge
Light fixture, Supply & fixing of 50W LED light fixture IP 65, included screws accessoris Etc..Considered outdoor type light fitting for equivalent. ---- as per the directions of the Engineer-in-charg...
Earthing, 25x6mm GI Earth Strip ---- as per the directions of the Engineer-in-charge
Earthing,, 8.0 SWG GI bare wire ---- as per the directions of the Engineer-in-charge
Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall. Supply & installation of GI Lad...
Pipe earthing, Supply & installation of GI PIPE Earthing as per IS:3043 with all installation details ---- as per the directions of the Engineer-in-charge
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
reregmrfsteeldesignanddrawing.zip
Design Document • 13.57 MB
Gundlupete, hanur, yelandur KW-3 call-3 final 09.04.2025.doc
Tender Document • 0.23 MB
New folder.zip
Design Document • 4.53 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .