REPAIR TO ROOFING, JOINERY PLUMBING AND MISC REPAIR AT BALIJAN UNDER GE (AF) CHABUA

Amount

M&L for brick work with sub-class 'B' bricks straight or curved on plan 6 mtr mean radius built in cement mortar (1:6) Complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement including taking down existing cement plaster of any description and in any position and racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "supply only")

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Dismantling asbesots cement (corrugated, semi-corrugated etc) sheets in roof coverings Complete all as specified and directed.

S&F MS work in roof trusses (framed), trussed, rails and fastenings and heavy bracket. Framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc with Fe 410.0 or Fe-310.0 complete all as speciafied and directed.

S & F gusset plates etc incl necessary welding drilling for fixing etc all as specified and directed

M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or 'J' / 'L' hooks all as specified and directed.

All as per item No 11 (here in before) but plain sheet as in ridges, gutters , facia etc complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed

S&F for suspended false ceiling using anodised GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner 'T" section of size 38 mm x 24 mm x 0.4 mm thickness and wall angle of size 24 mm x 24 mm x 0.3 mm thickness and cross Tee of size 24 mm x 24 mm x 0.43 mm thick (using 60 cm x 60 cm E board classic 4 mm thick ceiling board ) to be placed in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustement clip providing position for light fixtures, air conditioning dufuser and ducks, sprinkler, smoke detector etc. The main runner to be secured to structrural soffit by hanger @ 1220 mm maximum C/C. The last hanger at the end of each runner should not be placed at more than 450 mm from the adjacent wall. Flush fitting 1200 mm cross 'T" to be inter locked between main runner @ 610 mm C/C so asto form 600 mm x 600 mm grid complete all as directed

Demolition of brick work built in cement mortar complete all as specified and directed

Complete removal of existing treatment on roof and wall complete all as specified and directed

Applying two coat of Damp Proof ultra over a coat of prime paint on roofs and wall including cleaning the surface to receive primer complete all as specified in manufacturer instructionsand directed. (Paint to be paid seperately)

Supply only damp proof ultra fiber elastomeric liquid/ Roof seal and cool prime paint applied as waterproofing membrane complete all specified and as directed. Make Asian, Berger and equivalent

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc upto double story building.

M&L for applying two coats exterior grade emulsion paint on newly plastered surface of wall over a coat of primer including preparation of surface all as specified and as directed.

M&L for two coats of Oil bound distemper on wall surfaces on newly plastered surface of wall including preparation of surface and applying 3 mm thick wall careputty complete all as specified and directed.

M&L for three coats of white wash on newly plastered surface of ceiling including preparation of surface, complete all as specified and as directed.

Supply only water proofing compound all as specified and directed.

Taking down chowkat with shutters of any decsription without taking off shutters from frame area exc 1.50 Sqm but not exc 4.00 sqm complete all as specified and directed .

Taking down chowkat with shutters of any decsription without takingoff shutters from frame area n. exc 1.50 Sqm complete all as specified and directed .

Taking down shutter of any description n. exc 1.00 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed.

M&L mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeall as specified( Fe-410-O or 310-O) complete all as specified and directed. Gde-E-165

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rai ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in MS frame welded/sealed to the style and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F 30 mm thick factory made Flush shutters , solid core construction , with block board core and plywood face panels commenrcialface on bath sides with lipping/frame to match with and including preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 35mm thick Glazed skeleton door shutters, open rebated and prepared to receive glass, Gauze etc (with out sashbars) edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using IInd Class Hard wood complete all as specified and as directed.

All as per item No 33 (here in before) but 30 mm thick shutters for windows,ventilators etc are provided with stiles and rails as specified in SSR Part-I Section 8, clause.8.24 (b).

S & F for Providing and fixing factory made uPVC any colour Sliding window Area not exceeding 2.00 sqm each Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) complete all as specified and directed

S &F power coated Anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified

S &F for Anodised aluminium door/window shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each shutter, hinges, anodised aluminum snap beading screws etc. complete all as specified

S& F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 150mm long anodised aluminium handles, cast type, complete all as specified and as directed.

S&F 100mm long anodised aluminium handles, cast type, complete all as specified and as directed.

S&F for 200 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F for 100mm long anodised aluminium barrel tower bolt of extruded section, complete all as specified and as directed.

S&F 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S & F stainless steel butt hinges 100mm size medium weight, complete all as specified and as directed.

S & F stainless steel butt hinges 75mm size medium weight, complete all as specified and as directed.

S&F 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete

S&F steel ventilators with top hung shutters including hinges steel peg stay, complete without glazing bars, dovetailed or welded including guard bars/grills.

S & F framed work such as grills , gratings etc with ends of bar shouldered and or riveted or forged into spikes , framed gaurdbars ,barred iron , doors, laddars , framed, baluster walkways railings , and similar work conforming to Fe -290Gde E 165 complete all as specified and directed .

Taking down existing wire mesh of any discription and in any position and supplying and fixing stainless steel cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed

Supplying and fixing Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed

Hacking out old broken glass (any thicknes, size , quality or description) from wooden frames glazed with oil putty or fixed with beads.

S&F 4mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed

S&F 18/19 mm thick pre-laminated particle board exterior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter, shelves, partitions and complete all as specified and as directed.

M&L teak wood lipping 6 mm thick fixed with nails fixed to 19 mm thick plywood/block board

S&F in repair toilet paper holder chromium plated fixed to wall with chromium plated brass screw, complete all as specified and as directed.

S&F in repairs EWC (including two Nos fixing bolts including PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of vitreous china P or S trap, complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. all as specified and as directed.

S&F sinks with draining board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed fixed in repair.

S&F in repair for Swivel shower rose of PTMT , any colour , for fixing with 15 mm dia pipe ,( minium weight 40 gm. ) with and including Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour (Min wt 40gms) , fixed in repairs , complete all as specified and directed .

S&F grating doom 100 mm dia of PTMT Min wt 25 grams etc

S & F in repair for plate rack made out of 1 mm thick stainless steel of size 75 Cm X 75 Cm X 25 Cm with all internal fittings and compartments/ partitions all as per sample kept in GE office complete all as specified and directed.

M & L for Harrison rails, powder coated aluminum alloy of 25mm dia pipe decorative finish with and including supply and fixing powder coated decorated type brackets, stops, rollers etc. fixed on walls with brass screws with PVC rawl plugs as in curtain rods fixed in repair complete all as specified and directed.

Taking up or down steel tubing and connection of 15 mm bore tube of any description & in any position complete all as specified and directed.

All as per item No 67 (here in before) but 20 mm bore tubing.-ditto-

Supply and fixing unplastisized PVC pipe, 15mm dia (nominal) of pressure rating 10 per centimeter square complete with fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed

Supply and fixing unplastisized PVC pipe, 20mm dia (nominal) of pressure rating 10 per centimeter square complete with fittings and fixed to walls/ ceiling/floors etc in required length complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F in repair 15 mm dia bore bib taps cast copper alloy with, capstan head, CP long body fency type screwed down for iron pipe 15mm dia complete all as specified and as directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock /stop cock screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.

S& F in repairs 15mm Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required accessories for fitting complete all as specified and directed

M&L Providing, cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as spcified and directed

Taking down and refixing of aluminium doors shutters of area n exc 4sqm including new SS hinges, riveting, rubber beadings, locking arrangement, door stopper, alignment of doors frame styles and rails including required fasteners long screw to make shutter in serviceable condition and making good to existing surface complete all as specified and directed

Taking down and refixing of aluminium window shutters sliding/ casement of area n exc 2sqm including new SS hinges, riveting, rubber beadings, locking arrangement, alignment of window frame styles and rails including required fasteners long screw to make window in serviceable condition and making good to existing surface complete all as specified and directed

S & F in repairs Aluminium anodised Tubular towel rail 20mm dia incl brackets complete all as specified and directed

Dismantling 500 ltr water tanks and S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F in repairs 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, and bends complete all as specified and as directed.

D.D Construction (BID ID -3346625)

M/s KL Agarwalla & Co (BID ID -3344969)