PROVIDING SUPPLYING and PLACING FURNISHING ITEMS FOR 1 NO. TEMPORARY COURT AT DERA BASSI DISTT. S.A.S. NAGAR

Furniture Items

Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather.Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)BACK SIZE : 47.5 cm. (W) x 77 cm. (D)ARMRESTS: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism should be designed with the following features:• 360° revolving type.• Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• Tilt tension adjustment can be operated in seating position.• 5-position Tilt limiter giving option of variable tilt angle to the chair.• Seat/back tilting ratio of 1: 2• The mechanism housing should be made up of HPDC Aluminium black powder coated.SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm.ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Polypropylene. Overall Dimensions of ChairSeat Height -44.5 to 54.5 cm.Height -114.0-131.5 cm.Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm as approved by engineer in-charge/employer

Storwel Plain with four Shelf (1981H x 916W x 486D) Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available as approved by engineer in-charge/employer

4 Door Book Case (1742 H x 914W x 320 D) 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10) as approved by engineer in-charge/employer

PLU MAIN 2 DR CAM LOCK(1950 H x 375 W x 470 D) Product Size - 375(W) x 470(D) x 1950*(H) *Height including leveler Height of leveler is 50mm and adjustment possible is 15mm.Construction & Material - Aesthetically appealing completely knock down construction.The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered, Maximum 1Main + 4Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 - CRCA 'D' Grade as per IS-513 as approved by engineer in-charge/employer

Premium Mid Back Chair.SEAT SIZE 49.0 cm. (W) x 44.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 ±2 kg/m3/ and hardness load 16 ± 2 kgf for 25% compression. 3. ARMRESTS :The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The armrests should be scratch and weather resistant. The armrests should be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ± 0.05 cm. thk. HR steel. 4.CENTER TILT mechanism(for PCH-7001/2): The mechanism should be designed with the following features: • 360° revolving type. • 17°±2° maximum tilt on pivot at center • Upright position locking. • Tilt tension adjustment. 5. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 6. TELESCOPIC BELLOW ASSEMBLY: The bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. 7. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm.(76.3 ±1.0 cm with castors). 8. TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon as approved by engineer in-charge/employer

Retiring room

Office wooden executive table size 6 ’*3.5 ’*2.5 ’ with the provision of three drawers and tea tray on right side and computer unit on left side with keyboard and one cupboard, frame made of 19 mm commercial board except top of M.D.F. board, teak wood mouldings and beedings and Sunmica of best quality all over pasted, front closed, sprit polished, Supports of hard wood as approved by engineer in-charge/employer

Wooden Visitor Chair, frame made of 45mm x 30mm x-section of Teak wood, internal frame of cushioned seat and back made of cheel wood provided with 2” thick P.U. cushion in seat, 2” thick foam cushion in back, covered with tapestry using allied material necessary in cushioning process, spirit polished as approved by engineer in-charge/employer

Sofa Set three seats internal frame made of cheel wood, seat and back cushioned covered with superior quality leatherite arms of teak wood rest of the structure covered type as approved by engineer in-charge/employer