Provision of Composite Operation and Annual Maintenance for Various EnM Services, Term Contract, Arboriculture and Repairing of Furniture at Site 23 Acre Complex, Delhi Cantt

Total of BoQ 2 and BoQ 3

Total of BoQ 2 (PART - A)

Total of BoQ 3 (PART - B, C, D & E)

Percentage BoQ

BoQ_Ver3.0

Enquiry No: CCE(R&D)N/BOQ/O&M/23ACRE/DLI/2025-26 Dated 02 Feb 2026

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

PART - A (MANPOWER) Maintenance personal (Day Shift) :- Maintenance personal for complaint cell as detailed by site incharge by preparing duty roster as per priority of work requirement round the clock.

Degree Engineer electrical for MEP

Diploma Enginner (E&M) for MEP

Diploma Enginner (E&M) for coordination with CCE Office

Diploma Enginner (Civil) for coordination with CCE office

Electrician Skilled (981x26)

Carpenter Skilled (981x26)

Plumber Skilled (981x26)

CCTV System Technician, Skilled (981x26) (OEM certified)

BMS system Technician, Skilled (981x26)

Fire alarm system Technician Skilled (981x26)

Lift (Elevators)Technician, Skilled (981x26)(OEM certified)

Solar power/ water heating/ Sauna & Steam bath equipments, Technician Skilled (981x26)

Helper Un- Skilled (805x 26)

Barrack Store Duties Storekeeper , Skilled (981x26)

Data entry operator ,Skilled (981x26)

Store Asst. Semi- Skilled (893x26)

Manning and operation for E&M installation Shift wise:- as detailed by site incharge by preparing duty roster as per priority of work requirement round the clock. Pump operator for WSP Skilled (981x26)

Operator for STP Skilled (981x26) (OEM certified)

Pump operator for Swimming pool, Skilled (981x26)

Electrician cum DG Operator, Skilled (981x26) (OEM certified)

Electrician for dual metering system, Skilled (981x26) (OEM certified)

HVAC Operator Skilled (981x26) (OEM certified)

BIO-Degradable composter operator, Skilled (981x26)

BIO-Degradable composter Loader/unloader Un- Skilled (805X26)

Helper , Un- Skilled (805X26)

For Arboriculture Works Supervisor, (Skilled) (981x26)

Sr. Mali, Semi- Skilled (893x26)

Mali, Un- Skilled (805X26)

Note : (a) The contractor has to quote their overhead & profit, which are not covered under estimated cost.

Percentage BoQ

BoQ_Ver3.0

Enquiry No: CCE(R&D)N/BOQ/O&M/23ACRE/DLI/2025-26 Dated 02 Feb 2026

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

PART - B (Consumables Store)

Supply of Modular electrical switch 6 Amp, 250 volt, 50 HZ, AC, ISI marked, 1 way Make: Legrand Model : Arteor 5734 00 one module, White color, body material polycarbonate electrical grade.

Supply of Modular electrical switch 6 Amp, 250 volt, 50 HZ, AC, ISI marked, 1 way Make: Legrand Model: Myrius 673000 one module ,White color, body material polycarbonate electrical grade.

Supply of Modular electrical switch 6 Amp, 250 volt, 50 HZ, AC, ISI marked, 1 way Make: Legrand Model : Britzy 673401 one module ,White color, body material polycarbonate electrical grade.

Supply of Modular electrical switch 6 Amp , 250 volt, 50 HZ, AC, ISI marked, 2 way Make: Legrand, Model : Arteor, White color, body material polycarbonate electrical grade.

Supply of Modular electrical switch 6 Amp , 250 volt, 50 HZ, AC, ISI marked, 2 way Make : Legrand, Model : Britzy, White color, body material polycarbonate electrical grade.

Supply of Modular Blank Plate, Make: Legrand, Model : 573449,one module, White color, body material polycarbonate electrical grade.

Supply of Modular 6 Amp 250 volt, ISI marked, 3 Pin Socket, Make : Legrand, Model : Myrius 673044 two module White color, body material polycarbonate electrical grade.

Supply of Modular 6 Amp , 250 volt, 50 HZ, AC, ISI marked, 3 Pin Socket, Make: Legrand, Model : Arteor 5734 73 two module, White color, body material polycarbonate electrical grade.

Supply of Modular 6 Amp, 250 volt, 50 HZ, AC, ISI marked, 3 Pin Socket, Make: Legrand, Model : Britzy 673452 two module, White color, body material polycarbonate electrical grade.

Supply of Modular 16 Amp one way Switch, 250 volt, 50 HZ, AC, ISI marked, Make : Legrand, Model : Myrius 16 A White Switch

Supply of Modular 16 Amp one way Switch, 250 volt, ISI marked, Make : Legrand, Model :Arteor 573410 White color, body material polycarbonate electrical grade.

Supply of Modular 16 Amp, 250 volt, 50 HZ, AC, ISI marked,one way Switch, Make: Legrand, Model: Britzy, White color, body material polycarbonate electrical grade.

Supply of Modular 6 Amp & 16 Amp, 6 Pin Socket, 250 volt, 50 HZ, AC, ISI marked, Make: Legrand, Model: BritzyWhite Switch two module.White color, body material polycarbonate electrical grade.

Supply of Modular 6 Amp & 16 Amp,250 volt, 50 Hz, AC, ISI marked, 6 Pin Socket, Make: Legrand, Model : Myrius two module.

Supply of Modular 6 Amp & 16 Amp, 6 Pin Socket, 250 volt, 50 HZ, AC, ISI marked, Make: Legrand, Model : Arteor 573471 two moduleWhite color, body material polycarbonate electrical grade.

Supply of Modular Switch Plate Size 135mm x 75mm x 50mm, Make: Legrand, Model: 675563 Three module White color, body material polycarbonate electrical grade.

Supply of Modular Switch Plate Size 230mm x 80mm x 50mm, Make: Legrand, Model: Myrius 6M Plate WH 673206, White color, body material polycarbonate electrical grade.

Supply of Electrical Plug 16 Amp 3 Pin , 250 volt, 50 HZ, AC, ISI marked,Plug Top Make : Anchor BS001013, White color, body material polycarbonate electrical grade.

Supply of Electrical Plug 6 Amp 3 Pin, 250 volt, 50 HZ, AC, ISI marked, Plug Top Make: Anchor

Supply of Tubelight 22 Watt / 2200 lumen 6300 K, 250 volt, 50 HZ, AC, ISI marked, LED Make: Philips Model: BN021LED 22CWPSUGR

Supply of Plastic body LED Bulkhead Light suitable for, 250 volt, 50 HZ, AC, ISI marked, Make: Philips, Model: WT202WLED10S

Supply of Cool day light LED surface Circular ceiling light fitting, 12 watt surface mounting type , Operating voltage 90 volt, Ac, 50 Hz, Aluminium body Make: Havells.

Supply of indoor type surface mounted downlighter white CRCA powder coated LED light fixture with total system wattage 14-15W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflecctor, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supplysystem lumens 1500. Similar to Philips-SM251C LED 15S-6500 PSU WH

Supply of Mirror wall mounting type Polycarbonate LED batten tube light fitting (retrofit type) 10 watts , rated 220 volt, 50 Hz, length of LED tubelight 2 feet, Make Philips

Supply of Polycarbonate LED batten tube light fitting (retrofit T- 8 Type) 20 watts , rated 220 volt , 5 Hz, length of LED tubelight 4 feet, Make Philips.

Supply of Capacitor 2.5 MFD suitable for , 250 volt, 50 HZ, AC, ISI marked for single phase AC Electric Fan Make: TIBCON

Supply of Capacitor 4.0 MFD suitable for , 250 volt, 50 HZ, AC, ISI marked for single phase AC Electric Fan Make: TIBCON

Supply of PVC Insulated Copper Cable Single Core 1.00 Sqmm, Circular Sheathed Cable with Flexible Conductor 1100 volt grade, Make Gloster, Conformity to Indian Standard As per IS: 694: 2010 (With latest up to date Amendment)FR-LSH, Conductor material (shall conforming to IS:8130 ) Annealed Bare copper

Supply of PVC Insulated Copper Cable Single Core 1.5 Sqmm, Circular Sheathed Cable with Flexible Conductor 1100 volt grade,Make KEI, Conformity to Indian Standard As per IS: 694: 2010 (With latest up to date Amendment) , FR-LSH, Conductor material (shall conforming to IS:8130 ) Annealed Bare copper

Supply of PVC Insulated Copper Cable Single Core 2.5 Sqmm, Circular Sheathed Cable with Flexible Conductor 1100 volt grade,Make KEI, Conformity to Indian Standard As per IS: 694: 2010 (With latest up to date Amendment) , FR-LSH, Conductor material (shall conforming to IS:8130 ) Annealed Bare copper

Supply of PVC Insulated Copper Cable Single Core 4 Sqmm, Circular Sheathed Cable with Flexible Conductor 1100 volt grade,Make KEI, Conformity to Indian Standard As per IS: 694: 2010 (With latest up to date Amendment) , FR-LSH, Conductor material (shall conforming to IS:8130 ) Annealed Bare copper

Supply of PVC Insulated Copper Cable Single Core 6 Sqmm, Circular Sheathed Cable with Flexible Conductor 1100 volt grade,Make KEI, Conformity to Indian Standard As per IS: 694: 2010 (With latest up to date Amendment) , FR-LSH, Conductor material (shall conforming to IS:8130 ) Annealed Bare copper

Supply of PVC Insulated Copper Cable Single Core 10 Sqmm, Circular Sheathed Cable with Flexible Conductor 1100 volt grade,Make KEI, Conformity to Indian Standard As per IS: 694: 2010 (With latest up to date Amendment) , FR-LSH, Conductor material (shall conforming to IS:8130 ) Annealed Bare copper

Supply of PVC Insulated Copper Cable Single Core 16 Sqmm, Circular Sheathed Cable with Flexible Conductor 1100 volt grade,Make KEI, Conformity to Indian Standard As per IS: 694: 2010 (With latest up to date Amendment) , FR-LSH, Conductor material (shall conforming to IS:8130 ) Annealed Bare copper.

Supply of PVC Insulated Copper Cable 3 Core 1.5 Sqmm, Circular Sheathed Cable with Flexible Conductor 1100 volt grade,Make KEI, Conformity to Indian Standard As per IS: 694: 2010 (With latest up to date Amendment) , FR-LSH, Conductor material (shall conforming to IS:8130 ) Annealed Bare copper.

Supply of Pressure Sensitive Adhesive plasticized PVC Tapes having 20 mm width 10 Meter lenth Make Anchor.

Supply of Pressure sensitive adhesive plasticized PVC Tape roll having 25 mm width and 10 Meter length, Flame -retardant material, ISI marked make: Powergrip.

Supply of Twin Rubber HT Tape 25 mm width 10 Meter each roll for high voltage resistance electrical insulation Make: Steelgrip

Supply of Lubricant grease, Packing in plastic container,Gel type,clour light yellow to light brown, Anti corrosion, free from lumps and crust, grease specification grade GN43. complete Make : Indilub

Supply of Rectangle PVC channel 20mmx 12 mm 3 M length Make: Havells

Supply of self ballasted LED lamp 10 watt for general lighting services, suitable for B22d holder as per IS 16102 part-1 Make Surya/ Wipro

Supply of self ballasted LED lamp 7 watt for general lighting services, suitable for B22d holder as per IS 16102 part-1 Make Surya/ Wipro

Supply of Garden light 15 watt bollard type with single pole and LED lantern, aluminum casting , pole height including luminaire 0.5 meter 140 Volt to 270 Volt AC, single phase 50 HZ.

Supply of Modular electrical switches and accessories with 2.5A 2 Pin socket single module 250 volt.AC, single phase 50 HZ. Make: Cona

Supply of Electric ceilig fan with BLDC motor 1200 mm 5 star without regulator, class B single phase, 230 volt, 50 HZ. AC, Make: Usha

Supply of Exhaust fan 200 mm propeller type having fan motor totally enclosed clour Pearl white, AC ventilating elecric voltage 230V, 50HZ, capacitor type single phase class A, pole 6 with standard installation accessories such as frame, legs, rubber clamp & other hard ware.Make: Havells

Supply of Exhaust fan 300 mm propeller type AC ventilating elecric voltage 230V, 50HZ, non capacitor type single phase class B pole 4.with standard installation accessories such as frame, legs, rubber clamp & other hard ware, Make: Havells

Supply of Copper ring type electrical connection lugs or thimlbes size 2.5 Millimeter,packing per packet-10 Nos make Havells

Supply of Copper ring type electrical connection lugs or thimlbes size 4 Millimeter, packing per packet-10 Nos make Havells

Supply of Copper ring type electrical connection lugs or thimlbes size 6 Millimeter, packing per packet-10 Nos make Havells

Supply of Copper ring type electrical connection lugs or thimlbes size 10 Millimeter, packing per packet-10 Nos make Havells

Supply of Modular fan step regulator suitable for , 250 volt, 50 HZ, AC, ISI marked, 2 Module Make : Legrand Model :Myrius, White color, body material polycarbonate electrical grade.

Supply of Modular fan step regulator , suitable for , 250 volt, 50 HZ, AC, ISI marked, 2 Module Make : Legrand Model No. BRITZY - 673430 White color, body material polycarbonate electrical grade.

Supply of Miniature Circuit Breaker 6 Amp 1 pole 240 volts, 50 Hz, AC supply, Make Schneider Model No. -A9N1P06B, Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest complete.

Supply of Miniature Circuit Breaker 10 Amp single pole ,240 volts 50 Hz, AC supply, MCB Make Schneider Model No. -10A1pole with 1 PP Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest complete.

Supply of Miniature Circuit Breaker 16 Amp single pole 240 volts, 50 Hz, AC supply, MCB Make Schneider Model No. -A9N1P16C Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest complete.

Supply of Miniature Circuit Breaker 25 Amp single pole 240 volts, 50 Hz, AC supply, MCB Make Schneider Model No. -A9N1P25C Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest complete

Supply of Miniature Circuit Breaker 32 Amp single pole 240 volts, 50 Hz, AC supply, MCB Make Schneider Model No.MCB 32 Amp Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete

Supply of Ding Dong type electric bell suitable for , 250 volt, 50 HZ, AC, ISI marked Make Anchor Model No. 8272

Supply of Buzzer type electric bell suitable for , 250 volt, 50 HZ, AC, ISI marked Make Goldmedal Model - call bell

Supply of Modular Bell Push 1 Module suitable for , 250 volt, 50 HZ, AC, ISI marked Make : Legrand Model No. Arteor - 573413.

Supply of Modular Bell Push 1 Module suitable for , 250 volt, 50 HZ, AC, ISI marked Make : Legrand Model No. Myrius - 673022.

Supply of water heater element suitable for Recold make, 25/50 ltr capacity Geyser storage type 2000 watt copper coated stainless steel material rated volts 220 Volt, AC, 50 Hz, Make: Recold complete with standard accessories.

Supply of water heater Thermostste, Auto reset type suitable for Recold make Geyser storage type stainless steel material, IP 20 rating, rated volts 220 Volt, AC, 50 Hz, connection control terminals Make: recold complete with standard accessories.

Supply of Monitor power cable with plugtop 3 Pin 3 meter cable lenth power cable type make Dlink.

Supply of Monitor power cable with plugtop 3 Pin 1.5 meter cable lenth power cable type make Dlink.

Supply of Miniature Circuit Breaker 10 Ampere Double Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider / Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 16 Ampere Double Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 20 Ampere Double Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 25 Ampere Double Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 32 Ampere Double Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 40 Ampere Double Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 16 Ampere Tripple Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider /Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 20 Ampere Tripple Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make:Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 25 Ampere Tripple Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make:Schneider Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 32 Ampere Tripple Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 16 Ampere TPN , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 20 Ampere TPN , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 25 Ampere TPN , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 32 Ampere TPN , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Miniature Circuit Breaker 40 Ampere Four Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Residual Current Operated Circuit Breaker(RCCB) 40 Ampere, 30mA, Double Pole, rated volts 240 Volt, AC, 50 Hz, rated short circuit capacity 10000 Ampere Make: Schneider/ Legrand. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Residual Current Operated Circuit Breaker(RCCB) 40 Ampere, 30mA, Four Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Legrand/ Schneider Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of Residual Current Operated Circuit Breaker(RCCB) 63 Ampere, 30mA, Four Pole , rated volts 415 Volt, AC, 50 Hz,rated short circuit capacity 10000 Ampere Make: Legrand /Schneider. Conformity of the specification as per IS/IEC 60898 Part 1:2015 Latest, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 63 Ampere, 16KA, Triple Pole , rated volts 415 Volt, AC, 50 Hz, Make: Schneider.. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 100 Ampere, 16KA, Triple Pole , rated volts 415 Volt, AC, 50 Hz, Make: ABB /Schneider. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 125 Ampere, 16KA, Triple Pole , rated volts 415 Volt, AC, 50 Hz, Make: Schneider.. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 100 Ampere, 25KA, Four Pole , rated volts 415 Volt, AC, 50 Hz, Make: Schneider. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 125 Ampere, 25KA, Four Pole , rated volts 415 Volt, AC, 50 Hz,Make: Schneider.Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 160 Ampere, 25KA, Four Pole , rated volts 415 Volt, AC, 50 Hz, Make: ABB. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 200 Ampere, 35KA, Four Pole , rated volts 415 Volt, AC, 50 Hz, Make: Schneider. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 225 Ampere, 35KA, Four Pole , rated volts 415 Volt, AC, 50 Hz, Make: Schneider.. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 250 Ampere, 36 KA, Four Pole , rated volts 415 Volt, AC, 50 Hz, Make: Schneider.. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 500 Ampere, 50 KA, Four Pole , rated volts 415 Volt, AC, 50 Hz, Make: Schneider.. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breaker) 320 Ampere, 50 KA, Four Pole , rated volts 415 Volt, AC, 50 Hz, Make: Schneider.. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breakers) rated volts 415 Volt, AC, 50 Hz, Make: Schneider. 400A 4 Pole 50 KA. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breakers) Model (4220 23) rated volts 415 Volt, AC, 50 Hz, Make: LEGRAND 630 Ampere,4 Pole 50 KA. Conformity of the specification as per IS13032:1991, complete.

Supply of MCCB ( Molded Case Circuit Breakers) rated volts 415 Volt, AC, 50 Hz, Make: Schneider. 800 Ampere,4 Pole 50 KA. Conformity of the specification as per IS13032:1991, complete.

Supply of PVC rigid electrical grade casing/caping of size 20 mm suitable for draw electrical wiring, rectangle shape, Maximum 1500 volt withstand, ISI marked, Make : Primco plast/equivallent, White color,Thickness 1.8mm complete with suitable size PVC gutties.

Supply of PVC rigid electrical grade casing/caping of size 25 mm suitable for draw electrical wiring, rectangle shape, Maximum 1500 volt withstand, ISI marked, Make : Primco plast/equivallent, White color,Thickness 1.8mm complete with suitable size PVC gutties.

Supply of PVC rigid electrical grade Plain conduit pipe of nominal size 20 mm, Heavy mechanical stress conduit suitable for draw electrical wiring, Maximum 1500 volt withstand, ISI marked, Make : Primco plast/equivallent, White color, copmplete.

Supply of PVC rigid electrical grade Plain conduit pipe of nominal size 25 mm, Heavy mechanical stress conduit suitable for draw electrical wiring, Maximum 1500 volt withstand, ISI marked, Make : Primco plast/equivallent, White color, complete.

Supply of GI saddle for supporting pipes along with the roof/wall or to Plain conduit pipe nominal size 20 mm, Heavy mechanical stres, complete.

Supply of GI saddle for supporting pipes along with the roof/wall or to Plain conduit pipe nominal size 25 mm, Heavy mechanical stress complete.

Supply of gypsum screw of size 25 mm, countersunk head as per IS 6736 latest , materia carbon steel grade 1 conforming to IS 1812 make : Garg/RK

Supply of gypsum screw of size 40 mm, countersunk head as per IS 6736 latest , materia carbon steel grade 1 conforming to IS 1812 make: Garg/RK

Supply of gypsum screw of size 50 mm, countersunk head as per IS 6736 latest , materia carbon steel grade 1 conforming to IS 1812 make : Garg/RK

Supply of cable Tie, Length 300 millimeterx 7.6 mm thickness, cut to open lock type, clour black, Pack size 100 Nos make : Press fit.

Supply of , Circle cable Nail clip size 8 mm , Pack quantity 100 Nos, clip material PVC, clour white suitable for electrical fitting make : Press fit.

Supply of , Circle cable Nail clip size 10 mm , Pack quantity 100 Nos, clip material PVC, clour white suitable for electrical fitting make : Press fit.

Supply of , PVC gitti, diameter of open end10 mm , size 3 inch, 2 nos wing extension,Pack quantity 100 Nos, clip material PVC, clour white suitable for electrical fitting make : Press fit.

Supply of , PVC gitti, diameter of open end 06 mm , size2 inch, 3 nos wing extension,Pack quantity 100 Nos, clip material PVC, clour white suitable for electrical fitting make : Press fit.

Supply of B22d Polycarbonate electrical grade bayonet lamp holder, as per sample, screw type terninals, , specification conforming to IS:1258. Suitable for Operating 230 volts, 50 Hz, AC supply, Make Philips.

Supply of Multi-pin electrical plug top for Industrial application voltage 250V Make Schneider.

Supply of Indicator Lamp , colour green, red, blue for panel cutout diameter 22.5 mm, 63.5 Votl, IP 53 protection class, screw terminal type, Material plastic Make : Kaycee

Supply of Rotary switch front mounting on panel with mounting screws front plate size 64x64mm ,Knob actuator type, 415 Volt, 50 HZ, AC Make : Kaycee

Supply of Power Contactor , surface mounting via screw, 415 Volt, 50 HZ , AC , rating 50 Amps,3 pole standrad compliance with IEC60947-4-1, IS-13947-4-1, make: ABB

Supply of Power Contactor ,Din rail mounting , 415 Volt, 50 HZ, AC , rating 18 Amps,3 pole standrad compliance with IEC60947-4-1, make: L&T, Model MNX18

Supply of Digital Motor Protection Relay capacity 2.2 to 22 KW , current setting range 5-60 Amp , 415 Volt, 60 HZ, AC , panel mounting type operating power 3A/250VAC resistive load, time setting range 0-60 Sec, short circuit within 50ms make: L&T, Model MNX18 Make:Schneider electric

Supply of Basin mixture centre hole of nominal size 15mm material of body component, inlet tube, nozzle, bonet and back nut leaded tin bronze fancy piller mounting combination tap assembly and material of spindle, gland, washer. plate, nut ,screw and pin of brass as conforming to Indian Standard IS:8931 latest, make : Hindware.

Supply of Sink Mixer continental wall mount Tap assembly nominal size15mm material of body component, Inlet tube, nozzle, bonnet and back nut, knowb compnent , diverter components , spindle, glland, washer plate, nut, screws of Brass as conforming to Indian standard IS:8931 Latest, make : Hindware.

Supply of Fancy bib cock nominal size 15mm materal of body, body components, lnlet tube, nozzle, bonnet and back, copper tube, spindle, Gland, washer plate, nut of brass and rod (extruded or rolled)Forged brass.confirm to Indian Standerd IS: 8931 Latest, make : Jaquar.

Supply of 2 Way Fancy bib cock extended nozzle type nominal size 15mm materal of body, body components, lnlet tube, nozzle, bonnet and back, copper tube, spindle, Gland, washer plate, nut of brass and rod (extruded or rolled)Forged brass.confirm to Indian Standerd IS:8931 Latest, make Jaquar/Cera/ Prayag

Supply of EWC seat covers material made from pure polypropylene, suitable shape of cover with fold on top to securely hold (cut out in the middle) colour white , tensile strength MD-47, length of cover-17", width of cover -16" make : Jaquar/ Hindware/Parryware.

Supply of EWC toilet seat with all compolete fittings, European pattern 1 with S- Trap, Flushing box rim type, clour of seat cover with lid -creamy white, conforming Standerd IS: 2556 Make: Jaquar/Hindware/ Parryware.

Supply of Indian Style squating pan toilet seat with complete fittings, pan 480mm Flushing - box rim type. S type trap with inspection vent. clour of squating pan -creamy white ,Conformity to IndianStanderd IS: 2556 Latest, Make:Jaquar/ Hindware/ Parryware.

Supply of Wall mounting combination fancy tap assemble bath room mixture of nominal size15mm, material of body component, inlet tube, nozzle, bonet and back nut leaded tin , material of spindle, gland, washer. plate, nut ,screw and pin of brass as conforming to Indian Standard IS:8931 latest, make : Jaquar/Cera/Hindware.

Supply of PVC flexible waste pipe length 750 mm material of pipe PVC, material of waste coupling attached with pipe-PVC ,Latest, make : Jaquar/coronet/Hindware.

Supply of Bathroom water fall shower stainless steel of thickness 0.9 mm inlet diameter of pipe 15mm, size 150mmx 150mm, confirm to Indian Standerd IS: 5522,make :Cera -F7010111 SS.

Supply of Towel rail 150mm long material- cast brass , steel clour,closed rectangle shape, inner diameter 200mm, nominal diameter of rod 20mm,single layer complete Make- Hindware

Supply of Stainless steel SS304, Hanger Hook , having 4 number of mounting bracket good quality

Supply of Nylone Taflon tape 10 meter length, 1/2 inch width. Make Sterling/ equivelent.

Supply of White cement for regular repairs of various equipments, packing in plastic bag of standard make.

Supply of CP brass bib cock short body, Nickle -Chromium plated with coating thickness not less than service condition number 2 of table 3 of IS 1068/1993, 15 mm nominal bore, Hexagonal shape of shoulder at the bonet make : Hindware

Supply of CP brass bib cock long body, Nickle -Chromium plated with coating thickness not less than service condition number 2 of table 3 of IS 1068/1993, 15 mm nominal bore, Hexagonal shape of shoulder at the bonet make : Hindware

Supply of CP brass Angle Stop Valve confirming to IS:8931 Latest Nickle -Chromium plated with coating thickness not less than service condition number 2 of table 3 of IS 1068/1993, 15 mm nominal bore, make : Hindware

Supply of copper alloy (brass) pillar cock with sensor (04 Nos. 15 volt battery cell ) confirming to IS:8931 Latest for counter type wash basin oval shape, Nickle -Chromium plated with coating thickness not less than service condition number 2 of table 3 of IS 1068/1993, Nominal size 15 mm,make :Hindware

Supply of CP brass toilet paper holder, Nickle -Chromium plated with coating thickness not less than service condition number 2 of table 3 of IS 1068/1993, shape open rectangular make : Hindware

Supply of lever type flushing cistern single flush system with flush pipe PVC, Material of cistern : HDPE wall thickness of cistern 2mm, white clour , capacity of cistern 10 ltr for EWC complete with fixing kit, anti nrusting non corrosive screw and washer to be supplied along with cistern make : Hindware

Supply of HDPE collapsable type waste pipe flexible 32 mm dia, length 750mm, offwhite clour, basin connection size 40mm make : Coronet

Supply of health foucets for personel hygine and cleaning in bathrooms/ toilets with stainless steel flexible hose 1 mtr, tube ( 25 mm shower rose) lever type handle, wall mounted type, complete with all accessories make: Hindware

Supply of round shape hand shower of size 75 mm , Chrome plated , type of water flow only rain fall, shape of shower round, with stainless steel flexible hose 1 mtr, tube ( 25 mm shower rose) lever type handle, wall mounted type, complete with all accessories make: Hindware

Supply of CP brass bottle trap with outlet connection (32 mm ) handle style dome lever complet rings and washers make : Hindware

Supply of CP brass extention nipple , nominal size 15mm 25 mm long make : Coronet

Supply of Stainless Steel 304 flexible connection pipe 450 mm long , connection thread size 15mm with brass nut and silicon washers make : Coronet

Supply of Stainless Steel 304 flexible connection pipe 600 mm long , connection thread size 15mm with brass nut and silicon washers make : Coronet

Supply of PVC metal braided connection pipe 450 mm long , PTMT connection net, 15mm diameter, make : Coronet

Supply of PVC metal braided connection pipe 600 mm long , PTMT connection net, 15mm diameter, make : Coronet

Supply of automatic electrically valve suitable for 25 mm dia pipe, continously energized, insulation class -F, Model : Hinwil Switzerland AC/DC 24V, 2Amp 1.5 watt make :Belimo

Supply of brass ball valve nominal size 20 mm class 1,conforming to IS 778 Latest make :zoloto

Supply of brass ball valve nominal size 25 mm class 1,conforming to IS 778 Latest make :zoloto

Supply of brass ball valve nominal size 32 mm class 1,conforming to IS 778 Latest make :zoloto

Supply of GI hot finished seamless union 20 mm nominal bore conforming to IS 1239 (part-2) Latest make : Unik

Supply of GI hot finished seamless union 25 mm nominal bore conforming to IS 1239 (part-2) Latest make : Unik

Supply of GI hot finished seamless union 32 mm nominal bore conforming to IS 1239 (part-2) Latest make : Unik

Supply of GI hot finished seamless union 40 mm nominal bore conforming to IS 1239 (part-2) Latest make : Unik

Supply of GI hot finished seamless union 50 mm nominal bore conforming to IS 1239 (part-2) Latest make : Unik

Supply of GI hot finished seamless union 65 mm nominal bore conforming to IS 1239 (part-2) Latest make : Unik

Supply of Aluminum die cast hydraulic door closer, suitable for both anti-clockwise and clockwise door without any change in the part of closer , bottle type Anas per governing specification(dc40sm) make : Dorset

Supply of Aluminum die cast hydraulic door closer, suitable for both anti-clockwise and clockwise door without any change in the part of closer , bottle type Anas per governing specification(dc80sm) make : Dorset

Supply of Aluminum die cast hydraulic door closer, suitable for both anti-clockwise and clockwise door without any change in the part of closer , bottle type and as per governing specification(dc522 ats) make : Dorset

Supply of 12 inch door handle both side (D shape) , ISI marked,confirming to IS 208 latest make : Geze

Supply of wall magnetic door stopper ISI marked complete with accessories make :Geze

Supply of door mount aluminium door stopper double type conforming to IS 208 (latest), ISI marked, make ; Crown

Supply of leaver handle with morticle lock 6 liver and cylinder, brass body as per IS 208, make : Geze

Supply of mild steel pedestal safty lock for drawer weight 500 gram, cabnit front installation type, silver clour, nickle plated make : Hettich

Supply of stainless-steel push lock 22 mm as per IS 208 complete make : Hettic

Supply of mortice leaver safty lock for drawer, mild steel material,cabnit front installation, silver clour, nickle plated, key removable in locked and unlocked position make : Godrej

Supply of direct mounting water pressure gauge type burdon tube 150 psi, shape of pressure element 'C' type complete with accessories make : Guru

Supply of direct mounting water pressure gauge type burdon tube 220 psi , shape of pressure element 'C' type complete with accessories make : Guru

Supply of direct mounting water pressure gauge type burdon tube 300 psi , shape of pressure element 'C' type complete with accessories make : Guru

Supply of water pressure gauge cock valve / stop valve externally threaded (cast brass) nominal size 3/8 inch, polished bright finish, Hexagonel shape of bshoulder and bonnet conforming to IS 778 Latest make :zoloto

Supply of 20 mm dia nozzle valve for fire hose,water handled combination fog and straight stream, working pressure at inlet 7kg/cm²-9kg/cm² in compliance to EN 15182-2 make :Sant

Supply of 63 mm dia nozzle for fire hose inlet size 63mm, orifice size 50mm, capacity 10-40GPM, combination fog and straight stream, working pressure at inlet 7kg/cm²-9kg/cm² in compliance to EN 15182-2 make :sant

Supply of 12 volt, 120 AH , SMF lead acid battery in monoblock container conforming to IS 13369/1992with ammendments, ISI marked for diesel engine (wtp) make : Amron Quanta

Supply of 12 volt, 7 AH battery for fire panel, no of cell per battery 6,conforming to IS 15549, charging rating -C10,material of container- ABS, make : exide power safe.

Supply of MCP (Manual call point) glass suitable for Notifier make MCP complete with gasket.

Supply of butterfly valve (manual) nominal sise 200 mm, material of body cast iron, material of shaft stainless steel,complete with internal fastening, rings, bolting etc., conforming to IS: 13095. make : Sant

Supply of butterfly valve (manual) nominal sise 125 mm, material of body cast iron, material of shaft stainless steel,complete with internal fastening, rings, bolting etc., conforming to IS: 13095. make : Sant

Supply of butterfly valve (manual) nominal sise 100 mm, material of body cast iron, material of shaft stainless steel,complete with internal fastening, rings, bolting etc., conforming to IS: 13095. make : Sant

Supply of butterfly valve (manual) nominal sise 65 mm, material of body cast iron, material of shaft stainless steel,complete with internal fastening, rings, bolting etc., conforming to IS: 13095. make : Sant

Supply of butterfly valve (manual) nominal sise 50 mm, material of body cast iron, material of shaft stainless steel,complete with internal fastening, rings, bolting etc., conforming to IS: 13095. make : Sant

Supply of butterfly valve (manual) nominal sise 40 mm, material of body cast iron, material of shaft stainless steel,complete with internal fastening, rings, bolting etc., conforming to IS: 13095. make : Sant

Supply of y- stainer 65 mm, connection configeration: flanged, having stainless steel filter, strainer material PTFE, mesh size 12 to 155 microns make : Sant

Supply of y- stainer 50 mm, connection configeration: flanged, having stainless steel filter, strainer material PTFE, mesh size 12 to 155 microns make : Sant

Supply of 3 phase 380-480 volt, 50 hz,5.5 amp, 4.1 Kva VFD (variable voltage variable frequency drive), type : frm 2.2 ar1l-4a make : Fuji Electric

Supply of 3 phase 380-480 volt, 50 hz, 9.0 amp, 6.8 kva VFD (variable voltage variable frequency drive), type : frm 3.7 ar1l-4a make : Fuji Electric

Supply of VFD (variable voltage variable frequency drive) for secondary pump 3 phase 380-480 volt,50 Hz, 73/65 Amp, type : acs 560-01-073 a-4 make : ABB.

Supply of water pressure hydraulic gauge, Burden type, 150 psi, Nominal size of the dial -100 mm, NPT thread type, conforming to IS: 3624 latest make : Guru

Supply of water pressure hydraulic gauge, Burden type, 300 psi, Nominal size of the dial -100 mm, NPT thread type, conforming to IS: 3624 latest make : Guru

Supply of Plain washer plastic suitable for water tapes of size 15 mm and connection pipe of 15 mm dia.

Supply of Silicon Plain washer suitable for water tapes of size 15 mm and connection pipe of 15 mm dia.

Supply of Plain washer suitable for water tapes of size 15 mm and connection pipe of 15 mm dia.

Supply of Epoxy adhesive having consistency of thixotropic paste suitable on Metal application and having feature of environmental resistance.

Supply of Washbasin waste coupling of nominal size 32 mm, materal of fitting-leaded tin bronze conforming to grade 2 of Indian Standered IS: 318 Latest, make : Jaquar/Cera/Hindware.

Supply of Bottle trap nominal size 32 mm material of body components, - zinc base alloy and spindle, gland, washer plte, nut, foged brass Latest, make : Jaquar/ Jainko /Hindware.

Supply of Floor drain traps having round shape 100 mm diameter, with Anti cockroach grating fitting of same material provided and made up of SS 304, make : Shakti/Jainko/Hindware.

Supply of Floor drain traps centre hole type having round shape 100 mm diameter, with Anti cockroach grating fitting of same material provided and made up of SS 304, make : Shakti/ Jainko/Prayag.

Supply of Face fitting for spring collection suitable for Tap nominal size 15mm materal of body, body components, brass. confirm to Indian Standerd IS: 8931, make : Jaquar/Cera/ Hindware.

Supply of Face for rising fitting suitable for Tap nominal size 15mm materal of body, body components, brass. confirm to Indian Standerd IS: 8931 , make : Jaquar/Cera/ Hindware.

Supply of CPVC pipes nominal size 15mm dia 3 Meter long classification of pipe -class-1 (SDR-11)working pressure, ISI marked, make : Astral/Finolex/Prince.

Supply of CPVC pipes nominal size 20 mm dia 3 Meter long classification of pipe -class-1 (SDR-11)working pressure, ISI marked, make : Astral/Finolex/Prince.

Supply of CPVC pipes nominal size 25 mm dia 3 Meter long classification of pipe -class-1 (SDR-11)working pressure, ISI marked, make : Astral/Finolex/Prince.

Supply of CPVC pipes nominal size 40 mm dia 3 Meter long classification of pipe -class-1 (SDR-11)working pressure, ISI marked, make : Astral/Finolex/Prince.

Supply of CPVC pipes nominal size 32 mm dia 3 Meter long classification of pipe -class-1 (SDR-11)working pressure, ISI marked, make : Astral/Finolex/Prince.

Supply of CPVC pipes nominal size 50 mm dia 3 Meter long classification of pipe -class-1 (SDR-11)working pressure, ISI marked, make : Astral/Finolex/Prince.

Supply of CPVC ball valve, nominal size 15 mm ,threaded connection type,Maximum pressure 100-250 psi,leak free, standard port, body material CPVC, make : Astral/ Finolex/Prince.

Supply of CPVC ball valve, nominal size 20 mm ,threaded connection type,Maximum pressure 100-250 psi,leak free, standard port, body material CPVC, make : Astral/ Finolex/Prince.

Supply of CPVC socket nominal size 15 mm dia,class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC socket nominal size 20 mm dia,class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC socket nominal size 25 mm dia,class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince

Supply of CPVC socket nominal size 32 mm dia,class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC socket nominal size 40 mm dia,class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC socket nominal size 50 mm dia,class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC socket nominal size 15 mm,class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC socket nominal size 20 mm ,class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC socket nominal size 25 mm,class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC Elbow nominal size 32 mm class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC Elbow nominal size 40 mm class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC Elbow nominal size 50 mm class-1 (SDR-11) working pressure , make : Astral/Finolex/Prince.

Supply of CPVC Female adapter brass threaded nominal size 15 mm class-1(SDR-11) working pressure,make: Astral /Finolex/ Prince.

Supply of CPVC Female adapter brass threaded nominal size 20 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Female adapter brass threaded nominal size 25 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Male adapter brass threaded nominal size 15 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Male adapter brass threaded nominal size 20 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Male adapter brass threaded nominal size 25 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Union nominal size 15 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Union nominal size 20 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Union nominal size 25 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Union nominal size 32 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Union nominal size 40 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Union nominal size 50 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Tee nominal size 15 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Tee nominal size 20 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Tee nominal size 25 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Tee nominal size 32 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Tee nominal size 40 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of CPVC Tee nominal size 50 mm class-1 (SDR-11) working pressure , make : Astral /Finolex/Prince.

Supply of PVC pipes nominal size 110 mm dia, Socket end one side type for solvent cement jointing for potable water supplies conforming to IS 4985, length 6 meter, working pressure(PN) class 6, make : Astral/Finolex/ Prince.

Supply of PVC pipes nominal size 75 mm dia, Socket end one side type for solvent cement jointing for potable water supplies conforming to IS 4985, length 6 meter, working pressure(PN) class 6, make : Astral/Finolex/ Prince.

Supply of PVC socket for solvent cement jointing nominal size 110 mm dia as per IS 10124(part 2) latest for portable water supplies class 6, make : Astral/Finolex/ Prince

Supply of PVC socket for solvent cement jointing nominal size 75 mm dia as per IS 10124(part 2) latest for portable water supplies class 6, make : Astral/Finolex/ Prince

Supply of PVC Elbow for solvent cement jointing nominal size 75 mm dia for portable water supplies class 6, make : Astral/Finolex/ Prince

Supply of PVC Elbow for solvent cement jointing nominal size 110 mm dia for portable water supplies class 6, make : Astral/Finolex/ Prince

Supply of Silicon sealent resin Packed in tube 100 grame ,clour white, tensile module 140 psi, make : Contra/Prayag/ equivelent.

Supply of PVC Solvent cement size 1000 millilitre in poly bag , appearance clour clear,heat resistant,water resistant, impact resistant, moisture resistant , suitable with chemical grademake : Contra/Prayag/ equivelent.

Supply of Epoxy hardener technical grade , size 5 kilogram in plastic bag, clour white SR- epoxy grout/ equivelent

Supply of Magnet door catcher, CRC material with surface grinding and zink plated embedded with ABS virgin plastic body length of outer plate 47 mm. Make- Kadson/ equivalent.

Supply of Magnet door catcher, CRC material with surface grinding and zink plated embedded with ABS virgin plastic body length of outer plate 40 mm. Make- Kadson/ equivalent.

Supply of M S Nail length 12 mm, counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of M S Nail length 15 mm, counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of M S Nail length 20 mm, counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of M S Nail length 25 mm, counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of M S Nail length 30 mm, counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of M S Nail length 40 mm, counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of M S Nail length 50 mm, counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of M S Nail length 60 mm, counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of M S Nail length 80 mm, counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of M S Nail length 90 mm, counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of M S Nail length 100 mm, raised counter sunk head with head Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1,slotted raised counter sunk head wood screw length 08 mm as per IS:6736 latest Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1,slotted raised counter sunk head wood screw length 10 mm as per IS:6736 latest Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1,slotted raised counter sunk head wood screw length 12 mm as per IS:6736 latest Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1,slotted raised counter sunk head wood screw length 15 mm as per IS:6736 latest Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1,slotted raised counter sunk head wood screw length 20 mm as per IS:6736 latest Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1,slotted raised counter sunk head wood screw length 25 mm as per IS:6736 latest Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1, raised counter sunk head wood screw length 30 mm as per IS:6736 latest. Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1, slotted raised counter sunk head wood screw length 35 mm as per IS:6736 latest. Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1, slotted raised counter sunk head wood screw length 40 mm as per IS:6736 latest. Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1, slotted raised counter sunk head wood screw length 45 mm as per IS:6736 latest. Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1, slotted raised counter sunk head wood screw length 50 mm as per IS:6736 latest. Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1, slotted raised counter sunk head wood screw length 60 mm as per IS:6736 latest. Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1, slotted raised counter sunk head wood screw length 70 mm as per IS:6736 latest. Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1, slotted raised counter sunk head wood screw length 75 mm as per IS:6736 latest. Make - Shakti/ standerd/ RK/equivalent.

Supply of Carbon steel grade -1,slotted raised counter sunk head wood screw length 100 mm as per IS:6736 latest. Make - Shakti/ standerd/ RK/equivalent . .

Supply of GI medium grade steel pipe, screwed with socket at one end and other end protected with plastic cap, length of pipe 6 Meter, Nominal bore 25 mm, thickness of pipe 3.2mm, ISI marked Make : Jindal hissar, Prakash Surya/ equivelent.

Supply of GI medium grade steel pipe, screwed with socket at one end and other end protected with plastic cap, length of pipe 6 Meter, Nominal bore 40 mm, thickness of pipe 3.2mm, ISI marked Make : Jindal hissar, Prakash Surya/ equivelent.

Supply of GI medium grade steel pipe, screwed with socket at one end and other end protected with plastic cap, length of pipe 6 Meter, Nominal bore 50 mm, thickness of pipe 3.2mm, ISI marked Make : Jindal hissar, Prakash Surya/ equivelent.

Supply of Union suitable for GI medium grade steel pipe, Nominal bore 25 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of Union suitable for GI medium grade steel pipe, Nominal bore 40 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of Union suitable for GI medium grade steel pipe, Nominal bore 50 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Socket suitable for GI medium grade steel pipe, Nominal bore 25 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Socket suitable for GI medium grade steel pipe, Nominal bore 40 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Socket suitable for GI medium grade steel pipe, Nominal bore 50 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Elbow suitable for GI medium grade steel pipe, Nominal bore 25 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Elbow suitable for GI medium grade steel pipe, Nominal bore 40 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Elbow suitable for GI medium grade steel pipe, Nominal bore 50 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Tee equal suitable for GI medium grade steel pipe, Nominal bore 25 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Tee equal suitable for GI medium grade steel pipe, Nominal bore 40 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Tee equal suitable for GI medium grade steel pipe, Nominal bore 50 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Plug suitable for GI medium grade steel pipe, Nominal bore 25 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Plug suitable for GI medium grade steel pipe, Nominal bore 40 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of GI Plug suitable for GI medium grade steel pipe, Nominal bore 50 mm, ISI marked Make : Zoloto, Prakash Surya/ Unik.

Supply of Fevicol SR solution synthetic rubber adhesive 1 Kg packing Make Fevicol /equivalent.

Supplying of Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain Complete.

Supplying of single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain complete.

Supplying of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd.for 4 way - 150 mm dia M.S. Pipe connection conforming to IS 904 as required:

Supply of Chlorine dioxide for treating drinking water disinfectant Powder. Note:-The rates include for providing and stacking of chemicals, contractor’s profit, overheads, carriage, octroi, loading/unloading at site of work

Supply of Ferric Alum for water treatement in solid form as per IS: ALF-IS-299

Supply of Hydro chloric Acid (HCL) N/10 solution packed in Glass Bottles.

Supply of common salt in cristal form, sodium chloride content 94% min. on dry basis and insoluble impurities 1.5% max. Packing size 25 Kg in Jute/ plastic bag for water re-generating of softning plant all as directed by Engineer-in- charge.

Supply of 9 Watt rating LED focus wall mounting type luminaire Make :Bajaj,cat ref : BLWUP9Watt ED 9112468, Driver :PSBS03191088778, 140 volt to 280 volt at 50 Hz AC, , having short circuit protection IP65, surg and transients protection complete with all accessories.

Supply of Cylindrical Vertical Tank 1000 Litres , Rotational moulded polyethylene water storage purpose complete with lid and inlet outlet connection accessories. Make: Sintes as per IS 12701.

Supply of three phase energy meters Trinity Model - LAN DUAL, BIS Certified meter current limiting up to 70A . Electronic Meters shall meet the latest requirements of Central Electricity Authority (Installation & Operation of meters)Regulations. Anti-tampering features, shall register energy even when the return path of the load current is not terminated back at the meter , operate accurately even when incoming mains is connected to outgoing terminals and the load is connected to incoming terminals. LV-CT-operated meters, , factory calibrated and shall be sealed suitably before dispatch, data storage capacity for at least 35 days in non-volatile memory. downloading facilities for metered data through Common Meter Reading Instrument(CMRI), safety against the spread of fire.

Supply of Bath Stool of PVC good quality & standard make Supreme/ equivallent.

Supply of PVC Receptacle universal with bucket of capacity 10 Ltrs with lid and provided with removiable basket make cello, Supreme/ equivallent.

Supply of removeable cloth basket of capacity 10 Ltrs suitable for Receptacle/ dustbin make cello, Supreme/ equivallent.

Supply of Standard PVC moulded Garden chair with arms, of make make cello, Supreme/ equivallent.

Supply of Center table of size 1050x525x450 mm made out of PVC moulded of make make cello, Supreme/ equivallent.

Supply of Steel Shoe Rack of size 150D x 800W x 1400mm with 22 guage CRCA Sheet with Quality Powder Coating finish. Sturdy Single Frame Structure with all work done on Automatic CNC Machines. Shoe Rack Back Plate with GI coated Sheet for water resists wall fitting. 150mm Slim Depth with Wall Mounting 4nos of shutters centerly openable and lockable etc.

Supply of back rest surface mount stainless steel Bench Seating Capacity 3 - SeaterLength of Bench, 1300 mm ,Width of Bench 450 mm, Clear Height of Bench 450 mm,Base plate size (to be fixed on ground) 400 mm X 120 mm X 8 mm, Length of Back rest 1300 mm ,Seat and Back rest connecting pipe size 40 mm dia X 2 mm thickness,Uniform smooth Mirror finish as per table 8 of IS:6911/latest - polished to be done with automatic polishing machine, Material for bench Stainless steel 304 Grade conforming to IS : 6911 / ASTM A240 / A240M.

Sub Head : EXTERNAL ELECTRIFICATION Comprehensive Annual Maintenance Contract (CAMC) of 11/0.433kV Transformers , Compact Sub- stations, 11 KV-3 HT panel board, .11 KV-6 HT panel board complete along with VCBs , Bus coupler,RMUs, capacitor panels, APF panels, Active Harmonics filter panal complite & connected accessories including cable net work, LT panels, MDBs &SDBs installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. All the equipment/installation shall always be kept in good and trouble free operating conditions. All material to be used for servicing and preventive maintenance shall be provided by bidder under AMC Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills. (ii) The entire servicing/inspection shall be carried by Rep. of OEM or his authorised service centre. (iii) A Memorandum of Understanding (MoU) with OEM for this effect shall be submitted with commencement of CA work.

HT panel indoor cubical- 9 sets, Transformer 800 KVA-2 sets,CSS 630 KVA-2 sets, CSS 315 KVA 2 sets, CSS 800 KVA -1 Set, MDB-7 Sets, SDB and connected system. AMC includes material and labour for followings :- a) Testing of Oil, dehydration and filteration of Step down 11/0.433 KV transformer oil by Vacuum Dehydration / Oil Purification Units, Oil will heated (~60-80°C) and subjected to vacuum to remove water.Used to filter and remove moisture in circulation using method, oil will heated to allow moisture to evaporate all as directed by Engineer- in-charge.The charge for filteration deemed to be included in this job and the cost of spares such as cork sheet gasket, nut/bolts and washers.

b) Checking up in door termination and outdoor termination for loose contact and their proper tightness. c) Checking & testing of transformers of any type / capacity for IR value Test results obtained shall be recorded and produced to Engr in Charge. d) Testing of earth resistance of transformer installations and Measuring equipments and T&P required shall be arranged by the contractor.

e) Maintenance and competed servicing of VCB Panel including de-assembling of operating mechanism parts, well cleaning with petrol CRC 226, Removal of old grease and re-greasing the same with recommended grease, Check condition of SCI Contracts, Checking condition and alignment of jaw contacy, Checking and propertightening of hardware, Checking proper closing of all poles together, Checking of breaker tripping through push button, Checking and adjusting gap between hylam sheet and side plate, Checking motor operation in case of EDO, Checking of auxiliary contacts continuity proper change over, Checking presence of all circlips, Checking IR between phase- phase (VCB closed condition), Checking IR between phase - eartg (VCB closed condition), Checking IR bewteen phase 0- earth (VCB in open condition), replacing unserviceable parts and accessories like spring, gasket, coils, nuts, bolts and washers etc oiling and greasing of moving parts, re- assembling, fine setting of mechanism, well cleaning and de-carbonizing of arc control pot, fixed and moving contact including, testing, tripping check of HT VCBs making perfect operation in manual and electric mode including maintenance and well cleaning the complete panel board bus bars, de-carbonizing all joints, bus bar, CTs metal parts etc complete all by authorized service agency/OEM as directed by Engr-in-charge.

f) Calibration and setting of relays like phase, fault relay and earth fault relay installed on HT VCB panel and testing through recognized agencies by means of secondary injunction method setting of relay timings and play settings and fixing back the relays in position all as directed by Engineer – in – Charge. g) HT cable & LT cable fault repair work material and labour for Terminations & Control Cables any type and size for power distribution system as per list of assets including attending breakdown and ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameter.

h) Calibration and setting of Active Harmonics filter panal : Network Voltage, Permissible Voltage Variation, Ampere Rating, IGBT Connection Topology, System Frequency, Equipment efficiency,Compensation Modes, Reaction time, Response time, Programming Interface, reactors etc keeping it in good working condition parameter and submission of monthly report to the site in-charge. j) APFC (Automatic Power Factor Correction) panel maintenance involves regular cleaning to prevent overheating, routine inspection of components like capacitors and contactors for wear or damage, and thorough testing of relays, circuit breakers, and the control system to ensure keeping it in good working condition parameter and submission of monthly report to the site in-charge.

Providing 'B' Check of DG sets upto the time of 300 Hrs/ 6 Months whichever come earlier with the activity like changing of fuel filter, lub oil filter, oil filter, Separator fuel water, coolent, engine oil, Corrosion inhibitor, gasket cover etc as per manufacturer instructions and routine / preventive maintenance checks, checking up of engine and alternator for trouble free functioning and attending breakdowns of as per OEM periodicity. All material to be used for servicing and 'B' check maintenance shall be provided by bidder Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills. (i) DG set 750 KVA Silent DG set radiator cooled, 1500 RPM 1068 BHP Engine No. KTA-38-G12-R, SER NO 25450849, Make cummins India limited .Alternator 810 KVA , 415 volts, 0.8 PF, 648 KW, 1126.9 Amps, 3 phase, 4 wire, ser No N19J420149 Make: Stampford.

DG set 400 KVA Silent DG set radiator cooled, 1500 RPM 486 BHP Engine No. QSN-14-G2, SER NO 25449191, Make cummins India limited .Alternator 400 KVA , 415 volts, 0.8 PF, 320 KW, 556.5 Amps, 3 phase, 4 wire, ser No N19H357252 Make: Stampford 'Material and labour for servicing under B checks (Twice in a year) (iii) Kit super by pass filter, (iv) Seal O ring, (v) Inhibitor corrosion, (vi) Radiwash container, (vii) Element Air cleaner, (viii) Element air cleaner, (ix) Gasket rocker lever, (x) Engine oil in container, (xi) Misc minor parts and cleaning clothes, jelly, coolent, grease all as required at site. (xii) Replacement of SMF batteries 180 AH with lugs all as required at site.

The general type of work / maintenance services to be carried out during maintenance contract are as under :- (a) checking of Engine oil level. (b) Checking of oil bath cleaner oil level. (c) Drain sediments from fuel tank. (d) Dhecking of pre-cleaner dust pan. (e) Checking of air cleaner restriction. (f) Checking of coolant level. (g) Record oil pressure. (h) Checking / tightenig of all bolts / nuts of engine and alternator and wiring system. (j) Checking of AVM pads. (k) Checking of dia phragm coupling. (l) Checking of tappet clearance. (m) Clean fuel tank breather. (n) Clean crank case breather. (o) Checking of Air piping. (p) Cleaning of oil bath air cleaner tray scree. (q) Check / adjust belts. (r) Checking battery voltage, water level and apply jelly on terminals. (s) Checking fan hub / air blower hub and coolent pump and Cleaning of alternator from inside with hand blower. (t) Cleaning turbo charger. (u) Tighten manifold Nuts and screws. (v) Cleaning of electrical connections with CTC solution and cheaking and falt finding in AMF panel. (w) Checking of safety contols. (x) Cleaning of cooling system. (y) Cleaning of Engine and radiator assy. (z) Carrying out B & C cheak complete.

Material and labour for monthly maintenance of Fire suppression: Automatic linear pneumatic tube detection based clean agent system as per list of assets Calibration and setting of relays including attending breakdown and ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters and submission of monthly report to the site in-charge.

Material and labour for monthly maintenance of Rising mains, Meter board direct mounted on rising mains, Cable trays system as per list of assets attending breakdown and ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters and submission of monthly report to the site in-charge.

Comprehensive Annual Maintenance of dual metering software system consisting features :- three phase energy meters 657 Nos Trinity Model RF enabled Xenius Adaptor, Bridges and Gateway with appropriate firmware for supporting meter reading and feature like source based dynamic load alloction,,Energy Management software with AMR facility, Recharge Coupens software, Dynamic bill generation for each tenant based on the energy consumption, adjustment of commen area charges the software have capability to take in account the data Tarrif (DG supply) complete for existing KWH meters system, attending breakdown and ensuring its servicability by rectification /replacement of unservicable parts, renewal of software charges keeping it in good working condition parameters and submission of monthly report to the site in-charge.

Material and labour for LT cable fault repair work to Terminations & Control Cables of following sizes for power distribution system as per list of assets including attending breakdown and ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. Note:-The rate quoted deemed to be included all the spares and T&P required at site to complete the job in all respect. (a) Cable size upto 35 sqmm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade existing at trenches/duct/ wall/in panel.

Cable size above 35 sqmm and upto to 95 sq. mm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade existing at trenches/duct/ wall/in panel.

Cable size above 95 sqmm and upto to 185 sq. mm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade existing at trenches/duct/ wall/in panel.

Cable size above 185 sqmm and upto to 400 sq. mm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade existing at trenches/duct/ wall/in panel.

Repairing / rectification the fault of Outdoor type LED solar street light hybride type with dimming and PIR sensor, 12V inbuilt solar PV module, intergrated charger and driver with total system wattage 15-20W, high pressure die cast aluminium housing, Philips cat Ref : BRP710 LED 30 CW MR S1 12V LFP with material and labour by replacement of defective parts I.e solar panel, light source, rechargeable battery, charge controller and interconnecting cables, solar LED light and sensor , mounting bracket and hardware including attending breakdown and ensuring its servicability. all as directed by site-in -Charge

Repairing / rectification the fault of Outdoor type 8.5W, LED bollard with luminaire & efficacy ≥ 60 lm/W, CRI > 70, THD≤ 10%,or operation on single phase 170-270V 50Hz AC Philips Cat No. BCP 400 LED09 D CW PSU GR S1 with material and labour by replacement of defective parts I.e solar panel, light source, rechargeable battery, charge controller and interconnecting cables, solar LED light and sensor , mounting bracket and hardware including attending breakdown and ensuring its servicability. all as directed by site-in -Charge.

Repairing / rectification the fault of Outdoor type 150W, LED flood Light & efficacy ≥ 100 lm/W, CRI > 70, THD≤10%, with prewired electronic driver operation on single phase 170-270V 50Hz AC philips Cat No. BVP410 LED 172 CW HE NB FG S3 XT with material and labour by replacement of defective parts I.e solar panel, light source, rechargeable battery, charge controller and interconnecting cables, solar LED light and sensor , mounting bracket and hardware including attending breakdown and ensuring its servicability. all as directed by site-in -Charge.

(i) Check the specific troubleshooting steps, error codes, or diagnostic tools to help identify the defect and resolve issues related to the defective light fittings. (ii) Turning off the solar light switch or disconnecting the battery for disconnect the solar street light from its power source. (iii) Check causes of this failure the poor contact line, battery power loss, a serious drop in power storage (iv) Removing the top cover of the street light by removing screws or clips that hold the cover in place. (v) Use a soft, lint-free cloth and a mild detergent to clean the surface of the solar panel and other components gently. Dirt and grime removed properly. (vi) Carefully examine the wiring between the solar panel and the street light system. Ensure that all the cables are securely connected, without any visible fraying or damage. Make sure that the connectors are properly seated and tightened to maintain a solid electrical connection. (vii) Check poorly connected or damaged wiring , Loose connections, corroded wires, or damaged cables and replace. (viii) Clean any corrosion from the terminals using a suitable electrical contact cleaner. (ix) After confirming the physical integrity of the connections, inspect the wiring terminals and the terminal box or junction box where the solar panel wires connect to the street light system. (x) Check the quality of the LED light source lamp beads soldering or to replace the corresponding lamp beads, welded firmly or replace the entire street lamp head. (xi) Check the fluctuation of the LED passing current is too large, and the continuous current fluctuation replace the LED chip. (xii) Check the problem with the circuit and problem with the drive. (xiii) Check the current, voltage is too large or too small, detect and replace new drive.

(xiv) Check Controller malfunction and charging and discharging of the battery and controls the light operation replace the defective controller. (xv) Carefully remove the battery from its compartment, Inspect the battery for any visible signs of damage, leakage, or corrosion. (xvi) Check the battery fails to hold a charge or shows rapid voltage drop, replace the battery. (xvii) Inspect the sensor for any visible signs of damage, such as cracks, loose connections, or corrosion, ensure that the sensor is clean and free from any dirt, dust, or debris that might be obstructing its operation. Use a soft cloth or a gentle brush to carefully clean the sensor surface, if not respond replace it. (xviii) Examine the solar panel for visible damage, such as cracks, shattered glass, or loose wires. The minor damage that can be repaired, if the panel is severely damaged, need to replace it with a new one. (ix) After making any necessary repairs, use a multimeter to check the electrical connections. Ensure that there is continuity in the wiring and that the panel is generating power. (xx) Carefully reattach the top cover and secure it in place. Make sure all screws and clips are fastened securely. (xxi) Ensure proper repairs and reassembly, reconnect the solar street light to its power source. Turn it on and monitor its performance for a few nights to ensure it is working correctly if not replace entire street light unit.

Providing material and painting of exting street light poles any type and size with two coat of Aluminium paint after preparation of surfacing as per standared engineering practice and as directed by Engineer -Incharge. All the T&P required shall be arranged by contractor.

Providing material and applying one coat of synthetic enameled spray paint of existing colour on steel / iron surfaces of feeder pillar box, panel boards etc. with and including preparing of surface by scratching / removing rust, dust and old paints etc with wire brush, emery paper, grinder etc and making surfaces smooth for achieving better grip between surface and primer, complete all as directed.

Sub Head : INTERNAL ELECTRIFICATION Material and labour for replacement of 40 Nos 12 Volt, 65AH batteries @ 240 VDC with lead acid sealed maintenance free batteries for UPS 10kVA single phase 2 sets, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. Test results obtained shall be recorded and produced to Engr in Charge. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Material and labour for replacement of 29 Nos 12V, 7AH, lithium ion batteries batteries for UPS 600 VA single phase 29 sets, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. Test results obtained shall be recorded and produced to Engr in Charge.

Material & Labour for repairing by dismantling 240 Volt single phase 900 rpm heavy duty IS mark 250mm sweep PVC exhaust fans with lovers from site, taking out the burnt windings, cleaning and washing of slots and rewinding the same with copper winding wire of existing gauge and quantity (as per original manufacturer design) including replacement of all damaged parts i. e. bearings, insulating materials such as insulating sheets insulating paper , sealing compounds etc and reassembling the fan after varnishing, heating/drying, greasing of moving parts etc and reinstallation of the fan in original location, making proper electric connection, testing for smooth operation, complete all as directed.

Sub Head : SOLAR POWER SYSTEM AMC (Annual Maintenance contract) for monthly Servicing and attending breakdowns for Solar Power System comprising: On gride interactive solar photo voltaic power generation system ( 590WPx 255Nos) and cabling etc. installed at site as per list of assets by doing Servicing as per manufacturer's instructions, Ensuring its servicability , keeping it in good working condition parameters by checking Solar Photovoltaic Module conversion efficiency shall not be less than 16 %. PV modules used in solar power plants/ systems must be their output peak watt capacity and PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. Check the data monitoring system complete with accessories,Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc.Lightning and surge voltage protection,Test results obtained shall be recorded and produced to Engr in Charge. Note:-The rate quoted deemed to be included all the spares and T&P required at site to complete the job in all respect.

Sub Head : LIGHTING CONDUCTOR SYSTEM Repairing / rectification of fault in Lightning Protection system including material and labour by replacement of defective parts ensuring its servicability. Checking & testing of continuity of conductors any type and size including connected earthing systems , cleaning the area of earthing chamber, watering the chambers if required to make up the moisture contents and to reach the required Ohms value monthly Test results obtained shall be recorded and produced to Engr in Charge.

Sub Head : EXTERNAL WATER SUPPLY Providing Material and labour for monthly Servicing and attending breakdowns for following type pumps, by inspection, cleaning,servicing operation mechanism , relays, meters, etc carefully, tightning cable connections, replacing defective components,worn out fastners, lubricating for its smooth functioning, Rewinding if required, submitting service report giving details of replaced spares and rectifying the defect all as directed by Engineer-in-Charge. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Hydropneumatic system with variable speed system comprising of :- Vertical, inline multistage centrifugal pumping set with TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 volts, 3 phase, 50 Hz A.C.(b) pressure vessel – 01 No. x 100 Ltrs.(c) control panel with programmable logic controller for cyclic operation of pump, contactor,overload relay and MCBs(d) pressure switches (e) stainless steel suction and delevery header, ball valve (1 working + 1 stand by) capacity : 400 lpm Head : 25 m Qty-14 Sets Submersible single stage single entry pumps with TEFC submersible motor for 415 volts, 3 phase, 50 cyclesl. discharge 200 LPM. Head 120 m, HP/Load 5.0 Qty-04 sets Submersible single stage single entry pumps with complete fittings accessories with riser pipes Discharge 200 LPM.Head 120 m HP/Load 7.5 Qty -3 Sets, Vertical/horizontal monoblock centrifugal transfer pumping set connected to a TEFC induction motor suitable for 415 volts ± 3% phase 50 cycles AC supply with a common suction header with valves on main connecting & pumps inlet and a common delivery header with valves, a 100mm dia pressure gauge, vibration eliminating pads under foundation, all mounted on a common base plate of MS 80x40 mm, control panel filter feed pumps, No. of pumps: 3 (2 Working + 1 Stand by ) capacity 400lpm, Head: 30m Qty -3 sets, Hydropneumatic system with variable speed System for Domestic water transfer pumps connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C No. of pumps: 3 (2 working + 1 stand by ) capacity : 500lpm Head : 85m Qty 3 Sets Hydropneumatic system with variable speed System for Flushing warer transfer pumps connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C No. of pumps: 3 (2 working + 1 stand by ) capacity : 420lpm, Head: 85m Qty- 03 Sets; Hydropneumatic system with variable speed System for Irrigation water transfer pumps connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C No. of pumps: 3 (2 working + 1 stand by ) capacity : 300lpm, Head : 60m Qty-3 Nos Sump pumps for drainage submersible single stage single entry pumps connected to TEFC submersible motor for 415 volts, 3 phase, 50 cycles including MCC panel with level controllers, auto control, with both pumps connected to common outlet header including valves, non return valves, lifting chains etc. IN (1 Nos. pump room,1 Nos.STP,3 Nos. modular harvesting pit) No. of pumps: 2 (1 working + 1 standby ) capacity : 250 lpm, Head: 10m - Qty 12 Sets

CAMC of Vertical downflow filter in MS fabricated minimum 6 mm thick M.S. plate on shell and minimum 8 mm thick M.S. plate on dished ends, epoxy coated construction. underdrain system and raw water distributor , MS C class frontal face piping and valves battery with CI butterfly valves, pressure gauges and sampling points at inlet and outlet. etc. covering all functions of service, backwash, rinse, air release etc. , pressure gauges,gaskets/fasteners ,dual media filter capacity - 48000 lph, filtration rate - 16500 lph/m2 filter dia approx.1500 mm working pressure: 4.5 kg/cm2 Test pressure :7.0 kg/cm2, Preventive / Periodical Servicing as per manufacturer's instructions, supply of all type chemical and consumable require including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

CAMC of Online electronic chemical solution dosing system comprising of electronic metering pump (with both frequency and stroke length controls to control the dosage rate between 10-100 % of rated maximum capacity), virgin HDPE chemical grade solution tank, necessary injection fitting assembly, foot valve cum strainer and suction and delivery tubing for cholorination of filtered water, dosing capacity : 0-6 ltrs. per hour, dosing head : 3.5 kg/cm2, Preventive / Periodical Servicing as per manufacturer's instructions, supply of all type chemical and consumable required including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Providing Material for attending breakdowns of water supply external GI (galvanised iron) Pipe line and fittings installed at site for the following sizes by replacing defective components,worn out fastners for its smooth functioning, submitting service report giving details of replaced spares and rectifying the defect all as directed by Engineer-in-Charge.The contractor shall cut, leave or form holes, recesses, chases etc., in concrete, Masonry work, walls, floors and in any other situations as required or as directed by the Engineer in charge and make good in cement and sand mortar (1:3)/PCC (1:2:4) as decided by Engineer in charge and finish to match the adjoining surfaces. No extra payment shall be admissible in this regard Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills. (a) '15mm dia nominal bore

20mm dia nominal bore

25mm dia nominal bore

32mm dia nominal bore

40mm dia nominal bore

50mm dia nominal bore

65mm dia nominal bore

80mm dia nominal bore

100mm dia nominal bore

Providing Material for attending breakdowns of water supply external UPVC pipes and sprinkler system and fittings installed at site for the following sizes by replacing defective components,worn out fastners for its smooth functioning, submitting service report giving details of replaced spares and rectifying the defect all as directed by Engineer-in-Charge.The contractor shall cut, leave or form holes, recesses, chases etc., in concrete, Masonry work, walls, floors and in any other situations as required or as directed by the Engineer in charge and make good in cement and sand mortar (1:3)/PCC (1:2:4) as decided by Engineer in charge and finish to match the adjoining surfaces. No extra payment shall be admissible in this regard (a) 20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

110 mm dia

Sub Head : SOLAR WATER HEATING SYSTEM CAMC of Solar water heating system of following sizes (comprising: piping system, controling valves any type and size, flat plate collector copper based with copper tubes and copper fins, tank stand etc.) installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending complaints and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. (i) 500LPD FPC solar water heating system, Qty-13 sets (ii) 700LPD FPC solar water heating system, Qty-12 sets (iii) 800LPD FPC solar water heating system, Qty-8 sets

Sub Head : SWIMMING POOL CAMC of Swimming pool of size and having electro- mechanical components and comprising all equipments at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts ,supply of all type chemical and consumable require & keeping it in good working condition parameters :- (a) Testing of feed water quantity :- (i) Colour (ii) Turbidity (iii) Heavy Metals : BDL (iv) TDS (v) (Hardness (vi) Chloride with specific recommendation regarding suitability of water for swimming purpose. (b) cleaning of swimming pool wall/ floor area with high pressure water jet to remove all masses, algae and dirt and removal of dirty water alongwith sludge using sludge machine and disposal of the same to a safe distance and including scrubbing and scaling of internal surfaces using industrial vaccum machine and applying of anti bacterial sterlization spray to walls, floors. (c) Water supply pumping system , pumps, motor, panels, pipe line, valves etc. at site. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : SAUNA & STEAM BATH EQUIPMENTS CAMC of Sauna & Steam bath equipments as per list of assets and existing at site by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per standing operating procedure by Engineer-in-Charge. Ensuring its servicability by rectification /replacement of unservicable parts, supply of all type chemical and consumable require & keeping it in good working condition.

Sub Head : FIRE FIGHTING SYSTEM Providing 'B' ChecK of 100 KVA Diesel engine make cummions driving pumping sets DSM 100/36, flow rate 182 cum per hour Qty 2 sets upto the time of 300 Hrs/ 6 Months whichever come earlier with the activity like changing of fuel filter, lub oil filter, oil filter, Separator fuel water, coolent, engine oil, Corrosion inhibitor, gasket cover etc as per manufacturer instructions and routine / preventive maintenance checks, checking up of engine and Horizontally mounted, centrifugal type single stage fire pump for trouble free functioning and attending breakdowns of 2 Set as per OEM periodicity. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills. Material and labour for servicing under B checks (Twice in a year) (i) Element Lub. Oil filter, (ii) Kit fuel filter and ring (iii) Kit supper by pass filtere, (iv) Seal O ring (v) Inhibitor corrosion, (vi) Radiwash container (vii) Element Air cleaner, (viii) Element Air cleaner (ix) Gasket rocker lever, (x) Engine oil in container (xi) Misc minor parts and cleaning clothes, jelly, coolent, grease all as required at site. (x) Overhalling,repairing of Horizontally mounted, centrifugal type single stage fire pump including replacement of unserviceable parts i.e shaft, stuffing box, gland packing, bearing,bolts, nuts, impller, water seal sleeve, gaskets,packing,SS eye bolts, rubber couplintg etc including greasing, oiling complete for smooth functioning. (xi) Replacement of SMF batteries 180 AH with lugs all as required at site.

Providing Material for Servicing monthly and attending breakdowns for electrical motor Driven Fire Pumping set suitable for automatic operation horizontally mounted, centrifugal type single stage fire pump of 100 HP capacity-04 Sets , pump size DSM 100/36, flow rate 182.3 cum per hour as per list of assets by inspection, cleaning,servicing operation mechanism, relays, meters, etc carefully, tightning cable connections, replacing defective components,worn out fastners, lubricating for its smooth functioning, submitting service report giving details of replaced spares and rectifying the defect all as directed by Engineer-in-Charge. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Providing Material for Servicing monthly and attending breakdowns for Qty -04 Nos electrical motor Driven pressurization / pressurization/jockey pump ,horizontal type end suction centrifugal, cast iron body and bronze impeller, with SS shaft, flow of 180 LPM & 100 m head,safety relief valve, drain, pressure gauge, drain and bypass arrangement,10 HP squirrel cage induction motor suitable for operation on +/- 5 % of 415 V, 3 phase,50Hz, AC supply, pump with synchronous speed of 3000 RPM, T.E.F.C. type, horizontal foot mounted, class-F insulation, flexible coupling & coupling guard with the pump complete. by inspection, cleaning,servicing operation mechanism, relays, meters, etc carefully, tightning cable connections, replacing defective components,worn out fastners, lubricating for its smooth functioning, submitting service report giving details of replaced spares and rectifying the defect all as directed by Engineer-in-Charge.

Providing Material for Servicing monthly and attending breakdowns for Qty -01 set Horizontal centrifugal end suction single/multi stage, single/multi outlet pumping set with bronze impeller with C.I. body and fan cooled induction motor ,pressure gauges with gunmetal isolation valves and anti vibration pad, motor to be suitable for +/- 5% 415 volts, 3 phase, 50 cycles A.C. supply . Fire Terrace Pump for Sprot Complex Type : End suction Speed (rpm) : 2900, Capacity : 450 lpm, Head : 35Mtr.. H.P 5 by inspection, cleaning,servicing operation mechanism, relays, meters, etc carefully, tightning cable connections, replacing defective components,worn out fastners, lubricating for its smooth functioning, submitting service report giving details of replaced spares and rectifying the defect all as directed by Engineer-in-Charge.

Providing Material for Servicing monthly and attending breakdowns for Qty -01 set Electric driven water curtain pump horizontal type,multistage, centrifugal, split casing pumppressure of 3.5 kg/sq.cm. flow of 2280 LPM at minimum 100 m head . squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, operation on +/- 5 % of 415 volts, 3 phase 50 Hz. AC . by inspection, cleaning,servicing operation mechanism, relays, meters, etc carefully, tightning cable connections, replacing defective components,worn out fastners, lubricating for its smooth functioning, submitting service report giving details of replaced spares and rectifying the defect all as directed by Engineer-in-Charge.

Material and labour for applying one coat of synthetic enameled spray paint of existing colour on steel / iron surfaces of fire cabinate box, panel boards, Pump and motor, Fire hydrants and water pipe lines etc with and including preparing of surface by scratching / removing rust, dust and old paints etc with wire brush, emery paper, grinder etc and making surfaces smooth for achieving better grip between surface and primer, complete all as directed.

Providing servicing and refilling of Hand appliances fire extinguishers for following type as per list of assets by inspection, cleaning,servicing operation mechanism , discharg pipe etc carefully, replacing defective components for its smooth functioning, submitting service report giving details of replaced spares and rectifying the defect all as directed by Engineer-in-Charge. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills. (a) CO2 type fire extinguishers with steel cylinder capacity 4.5 Kg.

Water CO2 gas fire extinguishers capacity 9 litre.

ABC powder type fire extinguisher capaicity 6 Kg.

Clean agent modular (ceiling mounted) type capacity 5 Kg CE certified fire extinguisher filled with HFC 236FAClean Agent Gas.

CO2 type extinguisher actuated through a sprinkler head mounted on Capacity 22.5 Kg.

Supply and fixing cotton synthetic fabric circular woven jacked rubberised fabric fire hose RRL 15 meter long with coupling Stainless steel 63 mm size male and female instantaneous type.

Supply and fixing instanteneous type stainless steel branch pipe 63 mm dia of suitable lenth fitted with 16 mm dia nozzle complete all as specified and directed.

Supply and fixing Water delivery (Fire Aid Hose) pipe 25 mm dia 30 meter long 10 Kg/Sq Cm leaking pressure fitted gun metal shut off valve complete all as specified and directed.

Supply and fixing water high pressure guage of capacity 0-14 Kg / Per Sqm complete all as specified and directed.

Supply and fixing fire hose reel MS drum suitable for 20/25 mm dia rubber hose complete all as directed and specified.

Supply of nozzle 20 mm dia gun metal with shut off valve, rubber hose complete all as directed and specified.

Supply and fixing manual call point break glass type enclosed in aluminium cast alloy body of 3 mm thickness complete with chain and hammer & including inscribber in case of fire break glass complete.

Supply and fixing single outlet 63 mm dia stainless steel Hydrant valve with coupling & chain confirming to IS 5290 complete with nut bolt, washer and rubber gasket etc. all as specified.

Supply and fixing 2 way fire brigade hydrant (ISI Marked) including nut,bolt washer and rubber gasket etc. complete all as specified.

Supply and fixing Brass quartzoid sprinklers (approved)of 15 mm dia size, suitable for sustaining the pressure on the seat & water hammer effec ttype Pendent / Upright ( 68 deg.C) sprinkler quick response

Supply and fixing Brass quartzoid sprinklers (approved)of 15 mm dia size, suitable for sustaining the pressure on the seat & water hammer effect type Sidewall extended coverage (68 deg.C) sprinkler.

Supply and fixing UL listed electrically operated flow indicating switch (vane type) with threaded connection with flexible full bore paddle & NO/NC contact.

Providing material for servicing and attending breakdowns of Fire Suppression /Sprinkler system including all fittings, MS Pipe class 'C' (heavy duty) including all accessories such as screwed/welded joints, flanges, tees, reducers, structural steel supports and clamps etc installed at site for the following sizes by welding of leakage portionof pipes, replacing defective components,worn out fastners for its smooth functioning, submitting service report giving details of replaced spares and rectifying the defect all as directed by Engineer-in-Charge.The contractor shall cut, leave or form holes, recesses, chases etc., in concrete, Masonry work, walls, floors and in any other situations as required or as directed by the Engineer in charge and make good in cement and sand mortar (1:3)/PCC (1:2:4) as decided by Engineer in charge and finish to match the adjoining surfaces. No extra payment shall be admissible in this regard Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills. (a) 25mm dia

32 mm dia

40mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Sub Head : ROOF TOP RAIN WATER HARVESTING Providing Material and labour for Servicing of equipments monthly and attending breakdowns Roof top rain water system comprising:RCC Pipe, manhole, gully chamber, harvesting pit ,desilting chamber , Polypropylene pipe , borewell etc. installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing of submersible pumps and connected accessories including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : STP (SEWAGE TREATMENT PLANT) CAMC of Sewerage treatment plant (STP) (comprising: rotary air blowers , TW membrane ,, EPDM membrane , aeration tank & sludge holding tank, MBR tank,MS pipe, SS Piping, valve, non-return valve, ball valve, puddle flange,instrument , MBR module , automation ,permeate pump . sludge recycling pump , dosing pump,FRP tank, centrifuge machine , Self priming sludge feed pump (,electrical panel with cable, earthing. etc.) installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, supply of all type chemical and consumable require, keeping it in good working condition parameters. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : BIO-DEGRADABLE AUTOMATIC COMPOSTER CAMC of BIO-Degradable automatic composter comprising: capacity 1200 kg per day with inbuilt shredder Make: gem india, installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, supply of all type chemical and consumable require keeping it in good working condition parameters. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : FIRE ALARM CONTROL SYSTEM Providing material and labour for servicing of equipments monthly and attending breakdowns for fire alarm contrl system comprising: control panel, repeater panel, detector & devices, manual call point, relay module, electronic speaker cum hooters, wiring for fire alarm system, LED screen pixel pitch etc. installed at site as per list of assets by doing regular / Preventive / Periodical servicing as per manufacture's instructins, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification / replacement of unservicable parts, keeping it in good working conditin parameters. Note: (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : CCTV & SECURITY SYSTEM CAMC of CCTV & Security system (comprising :Dome camera, Bullet camera, Speed dome camera, manual call point,NVR, VMS, Intel Xeon Silver, 6TB HDD, POE+ switch, Client worlstations, 12U Rack frame, Diagonal screen, 42U Rack frame cable, conduit,Motorized vehicle barrier. Tyre spikes, UVSS unit, beam detector etc.) installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : PA SYSTEM Providing Material and labour for Servicing of equipments monthly and attending breakdowns for PA System comprising :voice command centre, voice evacuation speaker, audio amplifier, PA system controllers, manual call point, hooters cum speaker, relay module,monitor module, copper conductor etc. installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : VIDEO DOOR PHONE SYSTEM CAMC (Comprehensive annual maintenance contract)for Servicing of equipments monthly and attending breakdowns for Video Door Phone System comprising :video door phone outdoor unit, hands free video internal unit, 10" touch screen hands free video internal unit etc. installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters.

Sub Head : AUDITORIUM AUDIO VIDEO SYSTEM CAMC (Comprehensive annual maintenance contract) for Servicing of equipments and attending breakdowns for Auditorium equipments comprising :Audio vidio System, Lighting system, Projection System, Curtain & decoration etc. installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : HVAC SYSTEM CAMC of HVAC system (comprising:Screw type air-cooled chilling unit, water pumps, hot water generator ,Electrical panels, LT Power cables, Variable refrigerant flow modular type airconditioning system, air handling units, air purification units, air- washer units, Scrubber units, Pressurization fans,Chilled water piping, valves, VRF/VRV refrigerant pipes,Sheet metal ducts, indoor units 2 TR, VRF panel outdoorunit, related LT panels,Cable Trays, AC piping for split AC ,Earthing system , water cooler, refrigerator etc.) installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. NOTE :- (i) A Memorandum of Understanding (MoU) with OEM for respective E&M items shall be submitted by the contactor, that OEM shall provide all repair / servicing work and spares that may be required to undertake the repair work under this contract to the firm for the entire period of the contract and the MoU shall be signed by authorized representative of OEM. (ii) The agency has to keep all equipments well maintained for the work so as to give proper out put at all times. The spares / software licence/consumables required to be procured from Proprietary or OEM and shall must be supplied through Proprietary or OEM only (iii) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : LIFT (ELEVATORS) SYSTEM CAMC of Lift (Elevators) system (comprising:10 pasegger (680kg) travel:- B+G+12, 10 pasegger (680kg) travel:- G+12,10 pasegger (680kg) travel:- B+G+11 , 15 pasegger (1020 kg) Travel:- B+G+12, Service lift (1 Tonne) Travel:- B+G+12 etc.) installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. NOTE :- (i) A Memorandum of Understanding (MoU) with OEM for respective E&M items shall be submitted by the contactor, that OEM shall provide all repair / servicing work and spares that may be required to undertake the repair work under this contract to the firm for the entire period of the contract and the MoU shall be signed by authorized representative of OEM. (ii) The agency has to keep all equipments well maintained for the work so as to give proper out put at all times. The spares / software licence/consumables required to be procured from Proprietary or OEM and shall must be supplied through Proprietary or OEM only (iii) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : IBMS SYSTEM CAMC of IBMS System (comprising:Software and operator workstation I 7 processor PC, Color LED monitor,printer , switch, controller (DDC), system integration unit, temperature sensor, electromagnetic water flow meter,Differential pressure switch, Current relay, Duct sensor, CAT 6A cables,CO sensor etc.) installed at site as per list of assets by doing Regular / Preventive / Periodical Servicing as per manufacturer's instructions, including attending breakdown and all as per detail scope of work, Ensuring its servicability by rectification /replacement of unservicable parts, keeping it in good working condition parameters. NOTE :- (i) A Memorandum of Understanding (MoU) with OEM for respective E&M items shall be submitted by the contactor, that OEM shall provide all repair / servicing work and spares that may be required to undertake the repair work under this contract to the firm for the entire period of the contract and the MoU shall be signed by authorized representative of OEM. (ii) The agency has to keep all equipments well maintained for the work so as to give proper out put at all times. The spares / software licence/consumables required to be procured from Proprietary or OEM and shall must be supplied through Proprietary or OEM only (iii) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills.

Sub Head : FAÇADE CLEANING Providing Material and labour for quarterly Cleaning the glasses (glazings) surface, approx area is 800 Sqm and removing dirt, bird dropping, grease, oil, algae, fungus etc., including providing, applying and washing the surface with cleaning agent R2 / R3 chemical of approved brand and manufacturer with the help of required Scrubbers, Wipers, Dusters, Blade etc. all complete all as per detail scope of work and direction of Engineer-in-charge. four times in a year (The rate is inclusive of all materials & labours and all necessary arrangements to execute the work. Height of building as per existing at site)

Sub Head : ARBORICULTURE WORK Maintenance of Arboricalture work (comprising: Avenue Trees, Structural Treesc, Shrubs, Hedge / Edge, Lawn, Ground Covers, Indoor / Outdoor Plants, Flower Beds) at site as per list of assets with well developed, disease free keeping it in good healthy green condition by periodical / seasonal maintenance using sufficient quantity Manure, Urea, DAP & insecticide / pesticide, watering as per spacified and ground requirement all as directed by engineer-in-charge. Note:- For maintenance the entire Arboricalture work existing at site the contractor shall provide the gardener against the manpower considered in AE documents. Supply of Arboriculture Assets / Plants: Supply of the followingnew seasonal flower / indoor plants to replace / makeup the existing old vintage arboriculture items in presentable condition of various varieties with well developed, disease free and on flowering and earthen potts etc as and when required and as per direction of engineer-in-charge. :- (i) Providing and Displaying of plant Chrysanthemum double variety, well developed, having 45 to 60 cm ht., with 6 and above flowers with half blooming condition, fresh and healthy with bamboo stacking in 25 cm Earthen Pot.

Providing and Displaying of plant Chrysanthemum single variety in different colour well developed having 45 to 60 cm ht., minimum 100 and above half bloom flowers open well stacked with bamboo stick having three layer tiding by thread fresh and healthy foliage in 25 cm Earthen Pot.

Providing and Displaying of plant Dehlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cmm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Calendula double variety well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Antirrihinum Hybrid Dwarf Variety (3 in one) well developed with fresh & healthy Flower multi branch in full bloom in 25 cm Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Cineraria dwarf in different colour with fresh & healthy foliage well developed in 20 cm Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Marigold jaffri dwarf in different colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Eathen Pot / Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Pansy Hybrid Sakata well developed with fresh & healthy foliage with 3 to 4 flower in bloom in 20 cm Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Phlox in different colour well developed with fresh & healthy foliage 30 cm ht., in full bloom with stacking in 25 cm Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Salvia red Hybrid dwarf variety having 15 cm to 23 cm ht., well developed with fresh & healthy foliage in bloom in 20 cm Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Stock double Blue non-brabching having 30 to 45 cm ht., with full bloom, well developed in 20 cm Earthen Pot / Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Vinca different colour 6 to 8 well developed branch in full bloom stacked with green painted Bamboo stick in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Gerbera Hybrid, well developed, with fresh and healthy foliage, fully blooms in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-incharge.

Providing and Displaying of plant Portulaka hybrid in different colour with bloom well developed fresh & healthy in 20 cm Earthen Pot/Plastic Pot and as per direction of the officerin- charge.

Providing and Displaying of plant Daisy well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Dianthus dwarf in different colour fresh & healthy bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Zinnia hybrid double in different colour well developed fresh & healthy 30 to 45 cm ht. (3 to 4 plants in each pot) full bloom in 25 cm Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Gazania hybrid in different colour well developed with fresh & healthy foliage with full bloom in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Petunia hybrid different variety in different colour well developed with fresh and healthy foliage in full bloom in 25 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge.

Providing and Displaying of plant Stock double white colour dwarf variety with fresh and healthy foliage with bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Sunflower single well developed 8 to 10 half bloom buds multi branched in fresh & healthy full stacked with green painted bamboo stick stacking in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Marigold jaffri french orange/yellow/Russet colour well developed with fresh & healthy foliage with 60 to 75 flowers in bloom specimen plant 60 to 75 cm ht in 30 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing, stacking and Displaying Poinsettia dwarf multi head, having 25 to 30 cm ht., with 5 to 7 branches with fully coloured top with fresh & healthy foliage well developed in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Cockscomb well developed fresh & healthy 20 to 25 cm ht. attractive colours fully bloomed in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Cosmos well developed fresh & healthy 20 to 25 cm ht. attractive colours multi branching at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying of plant Kochia well developed fresh & healthy 20 to 25 cm ht. lush green well shaped in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-incharge.

Providing and Displaying of plant Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.

Providing and stacking canna Dwarf of height 25 to 30 cm,2 to 3 suckers in earthen pots of size 20 cm earthen pot/plastic pot as per Direction of Officer-in -charge

Providing and stacking geranium double variety having 30 cm ht., in different colour well developed with fresh & healthy foliage (3 in one) well bloomed in 25 cm earthen pot/ plastic pot

Providing, stacking and Displaying Cyclamen hybrid variety specimen 5 to 6 plants fresh & healthy in full bloom well developed in 35 cm Earthen Tray/ Nand and as per direction of the officer-in-charge.

Ground Cover Potted Plants:- Supply of the following ground cover potted plants of various varieties with well developed, disease free and on flowering :- Providing and Displaying of Alpinia Variegated (three in one) plant having ht. 30 cm and above , with fresh and healthy variegated foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Providing and Displaying of Asparagus marrie plant, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Providing and Displaying of Dianella variegated plant, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.

Flower Shrub Potted Plant:- Supply of the following flower shrub potted plants of various varieties with well developed, disease free and on flowering :- Supply and stacking of plant Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in p.bag of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of plant Hamelia patens (Dwarf ) of height 30-45 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.

Supply and stacking of plant Tabernaemontana coronaria (chandni variegated) of height 45- 60 cm. with 3-4 branches earthen pots of size 20 cm as per direction of the officer-in-charge.

Supply and stacking of plant Nerium oleander variegated of height 60-75 cm., multibranched in earthen pots of size 25 cm as per direction of the officer-in-charge.

Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge

Indoor Potted Plants :-Supply of the following indoor plants of various varieties with well developed, disease free and on flowering :- Providing and displaying of Aglaonema Snow White hybrid plant (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot . (Specimen Plant) & as per direction of the officer-in-charge.

Providing and displaying of Araucaria cookie plant, having ht. 1.20 m to 1.35 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Areca palm plant, having ht. 1.50 m to 1.80 m with 6 to 8 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Croton petra Bangalore variety plant, having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colourfull leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Dracaena Song of India variegated plant, having ht. 30 cm to 45 cm, well developed, fresh & healthy foliage with bright leaves in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Dracaena margineta plant, having ht. 30 cm to 45 cm with colourfull leaves, fresh and healthy in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Dracaena rosea plant, having ht. 30 cm & above with 8 to10 leaves, well developed, fresh and healthy in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Dracaena victoria plant, having ht. 30 cm & above, well developed with full of leaves, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Money Plant Broad Leaves mounted on moss stick 1.20 m ht., 5 to 6 plants in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Philodendron Oxicodium Golden Colour plant, Mounted on moss stick 1.20 m ht., having 3 to 4 plants placed at equal distance, well developed with full of fresh & healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-incharge.

Providing and displaying of Philodendron Oxicodium plant, mounted on moss stick 1.20 m ht., having 3 plants placed at equal distance, well developed with full of fresh & healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Providing, stacking and Displaying Anthurium plants having height 20 cm and above, blooming stage with fresh & healthy foliage well developed in 12 cm to 15 cm Ceramic pot and as per direction of the officer-incharge.

Chrysanthemum double well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.

Dahlia

Gerbera hybrid double

Pansy hybrid

Petunia hybrid

Salvia

Gaillardia double

Kochia

Sunflower Dwarf

Zinnia hybrid

Cosmos hybrid

Providing and stacking of Impatiens hybrid in different colour with fresh and healthy bud stage in polybag of size 10 cm and as per direction of the officer-in-charge.

Seeds packets of seasonal fower of different varieties.

Supply of 8" size earthan pots

Supply of 10" size earthan pots

Supply of 18" size cement pots

Supply of 24" size cement pots

Supply of 10" plastic pots

Supply of plastic tray 8'' to 10'' size for indoor / seasonal potted plants

Providing seasonal flowers in plastic / earthern pots Gladiolus bulb

Providing seasonal flowers in plastic / earthern pots Hyacinth bulb

Providing seasonal flowers in plastic / earthern pots Amaranthus bulb

Providing seasonal flowers in plastic / earthern pots Tulip bulb

Providing seasonal flowers in plastic / earthern pots Lillium bulb

Providing seasonal flowers in plastic / earthern pots Crocus bulb

Providing seasonal flowers in plastic / earthern pots Renuculus

Supply of Hanging 10" basket set with stand (Two basket in set)

Providing seasonal flowers in plastic / earthern Coconut basket

Providing seasonal flowers in plastic / earthern pots Bhareliya Polybag

Providing seasonal flowers in plastic / earthern potsIce ice plant Saplings

Providing seasonal flowers in plastic / earthern pots African Daisy pot

Providing seasonal flowers in plastic / earthern pots Rain lily pot

Providing and supply Anthurium pot

Providing and supply Allium pot

Providing and supply Flame lily pot

Providing and supply Caladium pot

Disposal of Arboricultural Waste:- Providing of all T&P and labour for disposal of Arboricultural waste /Garbage produced by Trimming /cutting of trees/Grass/ Plants/leaves /shrubs/ Hedge/Edge/Ground Cover etc.All the manpower, Motorized transport Truck (TATA 407) with Driver and Fuel,tools &Tackles etc. all incidentals like Labour for lifting, tripping,loading/unloading of Arboriculture Waste/ Garbage. Disposal of Arboriculture Waste/Garbage shall be be carried out on regular basis at a authorized dumping ground/yard notified by Govt/MCD/Contonment Board etc. all complete as per direction of Engineer-in-Charge. Note :- Contractor must visit & inspect the work site and dumping ground to fully acquaint himself about distance between the work site and dumping ground before quoting their rate. No claim whatsoever on such account shall be entertained by the departmental in any circumstances. Cost of Manure, Fertiliser, Pesticide :-Supplying and stacking at site dump manure from approved source, including carriage upto 5km complete (manure measured in stacks will be reduced by 8% for payment): For the newly supplied all type of arboricaltural seeds,seasonal flowers & Plants.

Providing of OKHLA khad

Supply of Neem Oil Cake

Supply of bone meal

Supply of Inorganic Fertilizers (Urea 50 kg/ Bag) as approved by Engineer-in-charge

Supply of Inorganic Fertilizers ( (DAP) 40 kg/ Bag) as approved by Engineer-in-charge

Supply of Malathion 50 % EC as per sample.

Supply of Chlorophyrophos 20% as per sample.

Supply of Sand for Levelling as per approved sample.

Supply of Good Earth as per approved sample.

Supply of Teracota white as per approved sample.

Supply of Geru as per approved sample.

Supply of Water proofing Cement Paint (Snowcem) vas per approved sample.

Supply of Teracota Paint (Liquid) as per approved sample.

Supply of Synthetic enamel paint (Colour to be decided by User) as per approved sample.

Supply of Cocopitas per approved sample.

Providing and stacking of Phoenix sylvestris Roxb. (Wild date palm/ khajur) height 150-165 cm. in big HDPE Bag as per direction of the officer-in-charge.

Supply of Rabies palm as per approved sample..

Supply of Ficus plant 5ft well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.

Supply of Bird net as per approved sample.

Supply of Garden water delivery PVC rubber pipe of high density as per approved sample.

Supply of Amaltas as per approved sample.

Supply of Kachnar as per approved sample.

Supply of plant stand metal display rack three racks (3'x2') as per approved sample.

Supply of Garden vertical panel & port rack all as per approved sample.

Sub Head : TERM CONTRACT FOR ARTIFICERS WORK Execution of items work covered under CPWD-DSR-2023 for civil & DSR 2025 for E&M (Percentage qouted Plus(+) or Minus(-) on total amount by bidder of this BOQ shall be treated as % qouted on DSR 2023/2025 for execution of maintenance work under Term Contract as per DSR 2023/2025. Rates for credit of schedule items for term contract related works.

Sub Head : REPAIR / MAINTENANCE OF FURNITURE Repair/Maintenance of following furniture items existing at site by doing all as per detail scope of work, Cleaning the furniture surface/ seats by using suitable cleaning agents/ Dry cleaning, Ensuring its useability by rectification /replacement of unservicable parts, keeping it in good working condition parameters including all necessary materials, tools & labour etc. i.e Repair / Replacement of all locks, handle, fasteners ,screw, washer, Hinges, upholstery , castors wheels, lift arrangement , cushion , foam,springs, buffers , channel, Batten, Polishing, dry cleaning the fabric and foam, vacuuming and spot cleaning, making clean pet accidents, food and drink spills and other messes, loose dust and dirt, by using fabric-safe bleach to fade stains like tomato sauce, coffee, fruit juice and more without damaging the fabric,Treatment of surface by removing faded polish, repair of scratches, applying wood filler, by rubbing with sand paper, polishing with melamine polish over French sprit polish. Etc all as directed by Engineer -in -charge. Note :- (i) Payment for these items shall be regulated based on invoice and purchase voucher/paid bills. Repair/Maintenance of steel Almirah Medium of size 1266 x750x 430mm with 2 Nos shelves making 3 compartment body and shelves by Replacement of locks, handle, fasteners with better/existing specification, repair of scratches , Spray painting (multi colour) conforming to IS: 13871, providing all necessary materials, tools & labour etc all as directed by engineer-in charge.

Repair/Maintenance of steel Almirah Large of Size 1980 x 1050x 560 mm domestic type by Replacement of locks, handle, fasteners with better/existing specification, repair of scratches , Spray painting (multi colour) conforming to IS: 13871, providing all necessary materials, tools & labour etc all as directed by engineer-in charge.

Repair/Maintenance of Hard Bed Single Wooden of size 1950 X 930 X 350 mm made out of teak wood with side rail of size 120 X 30 mm by repairing of loose components with requisite material, repair of scratches and finishing the entire bed with melamine polish in two coats all as directed by engineer-in charge.

Repair/Maintenance of Box type Single Bed of size 2015 x 935 x 325 mm by repairing of loose components with requisite material, repair of scratches and finishing the entire bed with melamine polish in two coats all as directed by engineer-in charge.

Repair/Maintenance of Box type Double Bed of size 2015 x 1835 x 325 mm by repairing of loose components with requisite material, repair of scratches and finishing the entire bed with melamine polish in two coats all as directed by engineer-in charge.

Repair/Maintenance of box type Double Bed of size 2015 x 1835 x 325 mm (Mattress Size 1900 x 1800mm) head board (60% Soft quilting work & 40 % veneering) with hard wood frame behind 19mm thick commercial board and 6mm thick ply having 50mm thick foam upholestred with leathrite on the front face, teak wood decorative moulding by repairing of loose components with requisite material, repair of scratches and finishing the entire bed with melamine polish in two coats all as directed by engineer-in charge.

Repair/Maintenance of box type Single Bed of size 1950 x 935 x 325 mm head board with hard wood frame behind 19mm thick commercial board by repairing of loose components with requisite material, repair of scratches and finishing the entire bed with melamine polish in two coats all as directed by engineer-in charge.

Repair/Maintenance of box type Double Bed of size 2015 x 1835 x 325 mm Box made out of 19 mm thick commercial board covered with 2.5mm thick teak veneer, leg with teak wood, top with opnable 12 mm thick commercial ply, head board (60% Soft quilting work & 40 % veneering) with hard wood frame behind 19mm thick commercial board and 6mm thick ply having 50mm thick foam upholestred with leathrite by repairing of loose components with requisite material, repair of scratches and finishing the entire bed with melamine polish in two coats all as directed by engineer-in charge.

Repair/Maintenance of standard steel four door Book Shelf of size 1680 x 840 x 300 mm by Replacement of locks, handle, fasteners with better/existing specification, repair of scratches , Spray painting (multi colour) conforming to IS: 13871, providing all necessary materials, tools & labour etc all as directed by engineer-in charge.

Repair/Maintenance of writing Chair of size 450 x 450 x 900 by repairing of loose components and finished with melamine polish, dry cleaning the fabric upholstery , providing all necessary materials, tools & labour etc all as directed by engineer-in charge.

Repair/Maintenance of writing Chair of size 450 x 450 x 900 without arm high density foam on seat duly upholstered with fabric by repairing of loose components ,providing all necessary materials and finished with melamine polish, dry cleaning the fabric upholstery all as directed by engineer-in charge.

Repair/Maintenance of Standard cushioned PVC moulded Verandah chair with arms by repairing of loose components and finished to distrubed surface, providing all necessary materials, dry cleaning the fabric upholstery all as directed by engineer-in charge.

Repair/Maintenance of Bin linen multipurpose of size 440 x 327 x 570mm Material:Plastic by proper cleaning using cleaning agent and finished to distrubed surface, providing all necessary materials.

Repair/Maintenance of Folding charpoy of size 1875x900x450mm frame made out of 32mm dia MS pipe by proper cleaning using cleaning agent & Repair/Replacement of Plywood in Charpoy top. loose fasteners, screw, washer, hinges,lug bushes providing all necessary materials all as directed by Engineer -in -charge

Repair/Maintenance of Chorpoy (Hard top) of Size 1950 x 900 x 425mm made out of GI pipe 32 mm dia by proper cleaning using cleaning agent, providing all necessary materials, Repair/ Replacement of loose handle, fasteners, screw, washer, hinges, lug bushes , all as directed by Engineer -in -charge

Repair/Maintenance of High back Dining Chair of size 450 x 450 x 900 mm made out of teak wood without arm with 50 mm thick high density foam on seat by repairing of loose components and finished with melamine polish, dry cleaning the fabric upholstery, providing all necessary materialsall as directed by engineer-in charge.

Repair/Maintenance of High back Dining Chair of size 450 x 450 x 900 mm made out of teak wood by repairing of loose components and finished with melamine polish, dry cleaning the fabric upholstery, providing all necessary materials all as directed by engineer-in charge.

Repair/Maintenance of Executives writing table of size 1200 x 600 x 750 mm made out of teak wood by repairing of loose components and finished with melamine polish, providing all necessary materials, dry cleaning the fabric upholstery all as directed by engineer-in charge

Repair/Maintenance of Executive Revolving and Tilting high back chair of size 560 X 590 X 1100 mm, having seat and back made of moulded PU foam 50 mm thick by providing all necessary materials, repairing of loose components and finished with applying suitable agent and dry cleaning the fabric upholstery all as directed by engineer-in charge

Repair/Maintenance of Computer Chair of Size 510 x 410 x 800 mm high Without arms moulded 12 mm hot pressed ply with 50 mm thick cushion seat & back, upholstered by providing all necessary materials, repairing of loose components and finished with applying suitable agent and dry cleaning the fabric upholstery all as directed by engineer-in charge.

Repair/Maintenance of revolving Low back Revolving chair of size 525 X 525 X 800 mm high by providing all necessary materials, repairing of loose components and finished with applying suitable agent and dry cleaning the fabric upholstery all as directed by engineer-in charge

Repair/Maintenance of Visitor Revolving Chair of size 515 x 515 x 800 mm high having PU seat & back duly covered with fabric by providing all necessary materials, repairing of loose components and finished with applying suitable agent and dry cleaning the fabric upholstery all as directed by engineer-in charge

Repair/Maintenance of Revolving and Tilting Executive Computer Back Chair of size 515 X 515 X 800 mm high having PU seat and back covered with fully upholsted with leatherete by providing all necessary materials, repairing of loose components and finished with applying suitable agent and dry cleaning the leatherete upholstery all as directed by engineer-in charge

Repair/Maintenance of standard cushioned PVC moulded Verandah chair with arms by providing all necessary materials, repairing of loose components and finished with applying suitable agent and dry cleaning the fabric upholstery all as directed by engineer-in charge

Repair/Maintenance of standard cushioned PVC moulded Verandah chair with arms by providing all necessary materials, repairing of loose components and finished with applying suitable agent and dry cleaning the seat upholstery all as directed by engineer-in charge

Repair/Maintenance of Study Chair steel of size 450x500x900mm with writing pad of size 500 x 300 x 25mm by providing all necessary materials, repairing of loose components and finished with applying suitable agent and dry cleaning the seat upholstery all as directed by engineer-in charge

Repair/Maintenance of Easy Chairs of size 500x475x800mm structure made out of second class head wood frame work by providing all necessary materials, repairing of loose components and finished with applying suitable agent and dry cleaning the fabric upholstery all as directed by engineer-in charge

Repair/Maintenance of Hat Stand with mirror of size 900x600mm made out of 19mm thick commercial block board by providing all necessary materials, repairing of loose components and finished with melamine polish as directed by engineer-in charge

Repair/Maintenance of Dressing stool of size 375x375x435mm by providing all necessary materials, repairing of loose components and finished with melamine polish, dry cleaning the fabric upholstery all as directed by engineer-in charge

Repair/Maintenance of sofa (2+1+1) made out of hard wood frame work, seat and back by providing all necessary materials, repairing of loose components and finished with melamine polish, dry cleaning the fabric/ seat upholstery all as directed by engineer-in charge

Repair/Maintenance of Sofa Single Seater (outer size 710W x 600D x 800H) by providing all necessary materials, repairing of loose components and finished with melamine polish, dry cleaning the fabric/ seat upholstery all as directed by engineer-in charge

Repair/Maintenance of Sofa Two Seater (outer size 1260W x 600D x 800H) by providing all necessary materials, repairing of loose components and finished with melamine polish, dry cleaning the fabric/ seat upholstery all as directed by engineer-in charge

Repair/Maintenance of superior quality sofa (3+1+1) made out of hard wood frame work, seat and back by providing all necessary materials, repairing of loose components and finished with melamine polish, dry cleaning the fabric/ seat upholstery all as directed by engineer-in charge

Repair/Maintenance of Sofa Single Seater (outer size 810W x 700D x 800H) by providing all necessary materials repairing of loose components and finished with melamine polish, dry cleaning the fabric/ seat upholstery all as directed by engineer-in charge.

Repair/Maintenance of Sofa Three Seater (outer size 1900W x 700D x 800H) by providing all necessary materials, repairing of loose components and finished with melamine polish, dry cleaning the fabric/ seat upholstery all as directed by engineer-in charge

Repair/Maintenance of Ordinary sofa set made out of 45x30mm 2nd class hard wood frame, seat cushioned with 75mm thick high density foam and extra padding with 20mm thick foam Sofa Three Seater by providing all necessary materials, repairing of loose components and finished with melamine polish, dry cleaning the fabric/ seat upholstery all as directed by engineer-in charge

Repair/Maintenance of VIP Chair (Sofa Type, reclinning front row) by providing all necessary materials, repairing of loose components and all finished with melamine polish, dry cleaning the fabric/ seat upholstery all as directed by engineer-in charge

Repair/Maintenance of Chair cushion reclining by providing all necessary materials, repairing of loose components and finished with melamine polish, dry cleaning the fabric/ seat upholstery all as directed by engineer-in charge

Repair/Maintenance of Center table of size 1050x525x450mm made out of teak wood frame ( side rail 70x25mm & legs 45x45mm) top with 19mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Peg table of size 450x450x450mm made out of teak wood frame ( side rail 70x25mm, glass top frame 70x25mm & orintal legs 45x45mm) top by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Centre Table two tier with glass (12mm thick plain glass) top of size 1200x600x450 mm made out of teak wood frame by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Notice Board of size 900 X 600 X 100 mm made out of 19 mm thick one side teak face block board having teak-wood frame by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Wooden Table of size 900 X 900 X 750 mm made out of teak wood frame (side rail 90x30mm & legs 70x70mm), with granite top by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge.

Repair/Maintenance of ladies dressing table of size 750W X 400D X 1950H mm made out of 19mm thick commercial board, having 5mm thick looking mirror (Shutter size 500 x 1200mm & 300 x 1200mm with open shelves) hardware and fitting like catcher, hinges, & handles by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of wall mounted Dressing Mirror with hanging arrangement made out of teak wood frame of size1200x450mm, by providing all necessary materials,, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of ladies dressing table of size 900W X 400D X 1950H mm made out of 19mm thick commercial board, by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Gents Dressing table of size 600 x 400 x1950mm made out of 19 mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Officer Table of size 1500x750x750 mm made out of 19 mm thick commercial board by providing all necessary materials,, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of writing table of size 1050 x 600 x 750 mm made out of 19mm thick commercial board by providing all necessary materials,, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of writing table of size 1200 x 600 x 750 mm made out of one side with teak wood legs 45x45mm by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Peg Set of 6 of size 600x100mm made out of 19mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Peg table of size 450x450x450mm made out of teak wood frame ( side rail 70x25mm & legs 45x45mm) top with 19mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Bed side Table of size 450 X 450 X 400 mm made out of 19 mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge.

Repair/Maintenance of Bed side Table of size 450 X 450 X 450 mm made out of 19 mm thick commercial board by providing all necessary materials,, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge.

Repair/Maintenance of Dining Table for 4 person of size 1200x900x 750mm made out of teak wood frame by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge.

Repair/Maintenance of Dining table for 6 persons of size 1800x900x750mm made out of teak wood frame by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge.

Repair/Maintenance of Dining Table for 8 Persons of size 2400 X 1050 X 750 mm made out of teak wood frame by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge.

Repair/Maintenance of Gents Dressing table of size 600 x 400 x1950mm made out of 19 mm thick commercial board by by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge.

Repair/Maintenance of Staff/Clerk Table of size 1200x600x750 mm made out of 19 mm thick commercial board having by by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge.

Repair/Maintenance of Computer table of size 1050x600x750mm, made out of 19mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent as directed by engineer-in charge.

Repair/Maintenance of Computer table of size 1350x600x750mm made out of 19mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge.

Repair/Maintenance of Computer table cum cabinet Unit of size 1500W x 1950H (upto working hight 600mm depth and above working hight 400mm) made out of 19mm thick commercial board covered with 2.5mm thick teak venner by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge.

Repair/Maintenance of Teapoy of size 400x400x400mm made out of teak wood frame by repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of TV cabinet of size1600x450x600mm with10mm thick plain edge polished glass mounded on ss studs, made out of 19mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of wall hung Bath cabinet of size 1200x 375x375mm made out of 19mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Crockery Unit of size 1800 x 400 x 1950mm made out of 19mm thick commercial board, drawer ridee on telescopic chanels, 3 nos vertical divider of 19mm thick commercial board, by by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Side Rack of size 1050 x450 x 750mm made out of 19mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Console table of size 1200x450x750mm made out of 19mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Display cabinet size 1950 X 900 X 400mm made out of 19 mm thick commercial board byproviding all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Executive display cabinet size 1950 X 1050 X 400mm made out of 19 mm thick commercial board by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Crockery Unit of size 1800 x 400 x 750mm made out of 19mm thick commercial board by by providing all necessary materials, repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Repair/Maintenance of Ironing table of size 1200 X400 X900mm top made out of 18mm thick Partical boardby repairing of loose components and finished with applying suitable agent / melamine polish, as directed by engineer-in charge

Please Enable Macros to View BoQ information