Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.2 LAccepted-AOC FRIENDS COLONY STREET A DHANGU ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹34.1 L+₹5.1 L (17.5%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹34.9 L+₹5.9 L (20.3%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹38.5 L+₹9.5 L (32.7%)Rejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹38.7 L+₹9.7 L (33.5%)Rejected-Finance H NO 400 STREET NO 1 SAIN GHAR PATHANKOT GURDASPUR PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹34.5 L
EMD Value
₹69,000
Closing Date
9 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Pathankot
GE (AF) Pathankot-145001
ADDL/ALTN TO CERTAIN MD ACCN AND PROVN OF TWO IRON GATE AT ENTRY AND EXIT OF SATLUJ AT AIR FORCE STATION PATHANKOT
2023_MES_574531_1
8421/GE/PAF-60/2022-23
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) Pathankot
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Pathankot
₹69,000
Yes
9 Mar 2023
12 Jan 2023
11 Feb 2023
12 Jan 2023
9 Feb 2023
26 Jan 2023
Amount
Excavating in post holes ( or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed by Engineer-in-Charge.
Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge.
Plain cement concrete 1:2:4 type B-1 (20 mm graded crushed stone aggregate) as in coping, beching apex stones, bed plates, bed blocks complete all as specified and directed by Engineer-in-Charge.
Cutting holes for bolts, pipes, joists, air flues, ventilators, cast iron boxes etc., and making good to existing work in brick walls built, in cement mortar 1:3 and stone walls built in lime mortar or walls of lime concrete of area not exc 150 sq. cm complete all as specified and directed by Engineer-in-Charge.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed by Engineer-in-Charge.
Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, with applying two coats of OBD of any tint over a white wash including taking down existing plaster complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonwork and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.
Brick work with sub class B bricks straight or curved on plan 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
All as per item No 8 above but except bricks Complete all as specified and directed by Engineer-in-Charge.
Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement on new surface including applying two coats of OBD of any tint over a white wash complete all as specified and directed by Engineer-in-Charge.
Supply and fixing channel, angle or tee of any section as in purlins, rafters fixed independently with continously weilding complete all as specified and directed by Engineer-in-Charge.
Supply and fxing MS pipe medium weight of nominal bore of not less then 50mm fixed independently as in post/columns imbedded in PCC complete all as specified and directed by Engineer-in-Charge.
Mild steel plates (plain or chequired not less 5mm thick, square cut or notched including necessary running weilding for connection of parts of column/rafters/purlins complete all as specified and directed by Engineer-in-Charge.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of pre-painted galvanlume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed vwith self tapping screws including eaves filling and making good all disturbed area complete all as specified and directed by Engineer-in-Charge.
Surface excavation not exceeding 30 cm and averaging 15 cm deep and getting out in soft/loose soil Complete all as specified and directed by Engineer-in-Charge.
Removal of excavated material (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.
Plain cement concrete type B-2 1:2:4 (20 mm grade crushed stone aggregate) in copping, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts ( including caps and bases) complete all as specified and directed by Engineer-in-Charge.
Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement on new surface complete all as specified and directed by Engineer-in-Charge.
Preparation of newly plastered surfaces and applying two coats of acrylic exterior emulation paint as approved of any shed/colour over a coat of primer as per manufacture instruction complete all as specified and directed by Engineer-in-Charge.
Supplying and fixing framed work as in doors or gates of angle or other section ornamental type with or without gusset plates, rails, braces, etc.,complete drilled for fixing of steel sheeting or other covering doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) quality-A complete all as specified and directed by Engineer-in-Charge.
Preparation of new or previously untreated surfaces of steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Complete all as specified and directed by Engineer-in-Charge.
OMKAR SHARMA AND CO
M/S SOHAL CONSTRUCTION CO
Vijay Kumar Contractor and Engineers
pardeep singh marwaha
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .