Development of Play field at Darhal Rajouri (Incl. taxes)

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 0 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil

Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the subgrade

Providing & Laying of coarse sand without gravels or stones

Providing & Laying of proposed pitch area with water & consolidating with power road roller

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete.

Providing & laying of fine good earth incl levelling watering, rolling with power road roller having capacity of 8 to 10 tonns incl. all leads & lifts & royality. Complete job.

Providing & laying of fine good earth incl levelling watering, rolling with power road roller having capacity of 8 to 10 tonns incl. all leads & lifts & royality. Complete job.

Providing & planting truf in the pitch & runway area and providing & laying of mannual incl. water & prepraing the grass till one no. of cutting.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) incl. carriage

1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) incl. carriage

1:2:4 (1 cement :2 coarse saQd : 4 graded stone aggregate 40mm nominal size) incl. carriage

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) incl. carriage

Providing and laying damp-proof course 5Crnm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size incl. carriage

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Supplying and stacking of over burnt brick aggregate at site of size range excluding carriage.90 mm to 45 mm

Laying water bound macadam sub-base with brick aggregate and binding material, earth etc. including screening, sorting, spreading to template and consolidation with light power road roller complete ( pavement for brick aggregate and moorum etc, to be made separately) :Over burnt brick aggregate 120 mm to 40mm

Half brick masonry with bricks of class designation 75 in foundations and plinth in : Cement mortar 1 :4 ( 1 cement : 4 coarse sand) incl. in super structure incl. carriage

Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Honey-comb brick work 10/11.4 em thick with bricks of class designation 75 in cement mortar 1:4 (1 cement: 4 coarse sand) incl. super structure incl. carriage

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand) incl. carriage

12mm Cement plaster finished with a floating coat of neat cement of mix: 1:4 ( 1cement : 4 fine sand) incl. carriage

Centring and shuttermg including strutting, propping etc. and removal of form for· Suspended floors, roofs, landings, balconies and access platform.

Walls of (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Foundations: footings, bases of columns etc. for mass concrete.

Lintels, beams, plinth beams, girders, bressumers and centilevers

Edges of slabs and breaks in floors and walls. Under 20 cm wide

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. Crushed. incl. carriage

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm incl. carriage

Tile work in skirting, risers of steps and dado (upto 2m height) over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles ( polished Raj Nagar. incl. carriage

Painting top of roofs with bitumen of approved quality at 17 kg 12.17 per 1 Osqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. with residuall type petroleum bitumen of penetration

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 em diameter and weighing not less than 440 grams.

Providing and fixing in position collapsible steel shutters with vertical channels 20x1 Ox2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,

Providing and fixing circular cast iron box for ceiling fan clamp 140 mm internal dia., 73mm height, 5mm thick rim, bottom and top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding top lid shall bescrewed into the cast iron box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamps shall be made of 12mm dia M.S. bar bent to shape as per standard drawing

Providing & laying of conduit pipe 25 mm dia

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore Medium

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc 25 mm dia. nominal bore Medium

10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay: 1 cow dung) and covered with flat tile bricks of class designation 1 00 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. incl. carriage

Providing gala 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : In 75x75 mm deep chase incl. carriage

Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. Made of G. I. wire of dia 4mm

Making khurras 45x45 em with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. incl. carriage

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) Polyester powder coated aluminium (minimum thickness of polyester powder coated 50 kg 408.55 microns)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Crushed incl. carriage

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/1 Osqm over and including base Coat of water proofing cement paint applied @ 2.20kg/1 Osqm)

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Supply of good loose earth

Removing of Malba

Provision for fixing of Net in Cricket

Provision for fixing & Painting of goal posts

Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C.l. surface box 1 00x1 00x75 mm (inside) with hinges Cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation, foundation concrete 1:5:10 (1 cement :5 finesand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.With F.P.S. bricks crushed incl. carriage

Constructing masonry Chamber 60x60x75 em, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.l. surface box 100 mm top diameter 160 mm bottom diameter and 180 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation, foundation concrete 1 :5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 :3 (1 cement : 3 coarse sand) 12 mm thick· finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks incl. carriage

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931

Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia.

Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25mm waste hole

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked black solid plastic seat and lid, with white vitreous china flushing cistern & C.P. flush bend.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x41 Ox265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unions and G. I. clamps complete, including painting of fittings and brakets, cutting and making good the wafls and floors wherever required:

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 600x480 mm with single 15 mm C.P. brass pillar taps

Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete. Semi rigid pipe 32 mm dia

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 435 x 357 mm dia.

Providing and fixing G. I. inlet connection for flush pipe connecting with W.C. pan.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter

75 mm diameter

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm dia

P/F of Brass Bib cock of approved quality 15 mm nominal bore

P/F of Ball valve brass of approved quality 25 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil

Ordinary rock

Hard rock (Requiring blasting)

Provision for fixing of Basket ball posts

Note :- 1) Any Tropical error shall be consider as per sanction schedule of rates/ estimates.

SHARAT PURI CONTRACTORS

Manzoor Ahmed Malik

Ghulam Qadir

ABROL CONSTRUCTION COMPANY

M/S HAMAYUN SARWAR KHAN